Back to simple search | Back to advanced search

    You searched for:

    • Material:Gold
    • Institution:NMS
    • County:Norfolk
    • Page:4

  • Thumbnail image of NMS-E467FE

Record ID: NMS-E467FE
Object type: COIN
Broad period: IRON AGE
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Gold Gallo-Belgic boat-tree quarter stater of the Morini. Obverse; probable boat with two occupants. Reverse; Tree-like object with stepped wedge-shape below. ABC 40. Circa 80BC-60BC.
Created on: Thursday 18th February 2021
Last updated: Friday 19th February 2021
Spatial data recorded.


  • Thumbnail image of NMS-52AC97

Record ID: NMS-52AC97
Object type: COIN
Broad period: IRON AGE
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Gold Iceni Irstead smiler quarter stater. ABC 1480. Circa. 20BC-AD10.
Created on: Thursday 11th February 2021
Last updated: Thursday 20th January 2022
Spatial data recorded.


  • Thumbnail image of NMS-84B4AC

Record ID: NMS-84B4AC
Object type: ROD
Broad period: UNKNOWN
County: Norfolk
Workflow stage: Published Find published
Description: Length of thick gold wire of circular cross-section, with a fresh granular break at one end and roughly rounded at the other (possibly an old break). It is curved along its length, forming about half of a circle about 35mm in diameter. The outer surface of the curve is smooth but the inner has slight longitudinal facets, as if hammered to shape.  It is slightly crushed and bent at the rounded end, and the damage has caused cracking to the metal here. Dimensions: Unbent length 50mm, bent into half-circle measuring 32.1 x 37.9mm. Diameter of rod 4.1…
Created on: Wednesday 20th January 2021
Last updated: Thursday 26th August 2021
Spatial data recorded.


  • Thumbnail image of NMS-81472B

Record ID: NMS-81472B
Object type: FINGER RING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Description and Dimensions: Small gold object, probably a tiny medieval finger-ring. A flattish pyramidal bezel 5.5mm square, with a very slightly concave reverse and a 1.5mm diameter circular indentation at the apex, forms the decorative centre. The opposite edges each have a very short flaring projection. 2.5mm wide and perhaps 0.7mm long. From the centre of each of these emerges a thin strand of gold, one longer (1.0mm x 0.7mm at the break) and the other much shorter (1.2mm x 0.8mm at the break) which would presumably have joined. The longer strand is bent, but was perhaps original…
Created on: Wednesday 20th January 2021
Last updated: Thursday 26th August 2021
Spatial data recorded.


  • Thumbnail image of NMS-F06C53

Record ID: NMS-F06C53
Object type: EAR RING
Broad period: ROMAN
County: Norfolk
Workflow stage: Published Find published
Description: Gold earring of Roman date, probably of Allason-Jones's type 11. It appears to consist of two layers of thin circular sheet backplate, both now crumpled but originally 14mm in diameter. In the centre of the front is a smaller circular sheet element which may once have been three-dimensional but is now crushed flat. A circular-section wire hook emerges from the reverse. It tapers as it curves out and around to form an apparently well-preserved hook in the shape of an open loop; the wire has a blunt end which is slightly recurved. Dimensions:&nb…
Created on: Wednesday 13th January 2021
Last updated: Thursday 10th November 2022
Spatial data recorded.


  • Thumbnail image of NMS-F7910D

Record ID: NMS-F7910D
Object type: FINGER RING
Broad period: ROMAN
County: Norfolk
Workflow stage: Published Find published
Gold finger-ring. Oval colourless translucent flat-topped glass within a raised box-setting surrounded by a roped flange. Flat hoop of constant width, with two twisted roped wires applied to it and bordered on each edge by finely milled wires. Two globules at junction of hoop and bezel on each side. 4th century. The oval box setting is oriented longitudinally to form the bezel of the finger-ring. It is formed from a strip of gold bent to fit closely around the slightly irregular piece of glass. The 'roped flange' is a piece of twisted gold wire around the base of the box setting.…
Created on: Tuesday 8th December 2020
Last updated: Tuesday 8th December 2020
Spatial data recorded.


  • Thumbnail image of NMS-D4A66D

Record ID: NMS-D4A66D
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval gold finger ring, complete, slightly distorted and sprung apart at a soldered butt joint. The plain hoop is of circular cross-section with no discernible flattening of the inner surface. Probably 18th century but not closely datable and without diagnostic features to suggest that it may be more than 300 years old. A very flimsy piece. Diameter 18 - 18.8mm. Diameter of cross-section 1mm. Weight 0.56g. Finder's no. POD 9/6
Created on: Tuesday 24th November 2020
Last updated: Thursday 7th January 2021
Spatial data recorded.


  • Thumbnail image of NMS-2656E9

Record ID: NMS-2656E9
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Gold halfcrown of Henry VIII, uncertain initial mark with HR and crowned rose, curled over into a tubular shape and hence most details illegible, 1526-47 
Created on: Monday 16th November 2020
Last updated: Wednesday 30th August 2023
Spatial data recorded.


  • Thumbnail image of NMS-EAE967

Record ID: NMS-EAE967
Object type: FINGER RING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Description: Gold finger-ring of 'stirrup-shaped' type. The hoop is rounded in cross-section, with a slight seam or crease in places along the centre of the inner surface. It flares to steep undecorated shoulders and has a solid triangular bezel set with a rectangular gem of dark colour (possibly blue) with a shiny, cabochon-cut polished convex surface. There is a slight scrape on one face of the bezel. Dimensions: External diameter (or width of ring) is 21.7mm, internal diameter is 18.2mm. Total from top of gem to exterior at back of hoop, 25.7mm. At the back of the hoop, the mi…
Created on: Friday 13th November 2020
Last updated: Friday 30th April 2021
Spatial data recorded. This findspot is known as 'Alby with Thwaite', grid reference and parish protected.


  • Thumbnail image of NMS-6B927C

Record ID: NMS-6B927C
Object type: COIN
Broad period: IRON AGE
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Gold quarter stater, Icenian Irstead type, 1.10g, c.AD10-42
Created on: Monday 26th October 2020
Last updated: Monday 26th October 2020
Spatial data recorded.


  • Thumbnail image of NMS-71554C

Record ID: NMS-71554C
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Description: Small gold signet finger-ring of early post-medieval date. The hoop is D-shaped in cross-section, with the interior flat or very slightly convex and the exterior more strongly convex. It flares from a minimum of 2.85mm wide and 1.4mm thick at the back of the hoop, to vertical shoulders. The bezel is oval and flat, making the ring D-shaped in side view, and is set longitudinally, The arms are quartered and the blazon is: Quarterly, (1) A fess engrailed between three fleurs-de-lis, (2) on a fess between two chevrons a crescent, (3) a chevron between thre…
Created on: Wednesday 14th October 2020
Last updated: Friday 1st March 2024
Spatial data recorded.


  • Thumbnail image of NMS-EF27AB

Record ID: NMS-EF27AB
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Gold noble of Edward III in two torn and crumpled parts which nonetheless are clearly part of the same coin.The battered, scuffed and folded condition of the coin does not enable precise identification although the cross potent initial mark and double saltire stops suggest a Treaty period issue, North 1231ff,1363-9. Weight 4.31g and 1.87
Created on: Thursday 8th October 2020
Last updated: Friday 6th November 2020
Spatial data recorded.


  • Thumbnail image of NMS-B32D47

Record ID: NMS-B32D47
Object type: BROOCH
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Description: Tiny gold annular brooch with circular frame. Most of the frame is circular in cross-section, but it is interrupted by a pin constriction and by four equally spaced collars which encircle the frame and which are decorated all around with relief pellets made using an annulet punch; these are usually known as 'brambled' bosses. Pin missing. Dimensions: Maximum diameter of brooch (with bosses) 16.0mm. Diameter of frame without bosses,14.0mm. Thickness of brooch (across bosses) 2.9mm. Diameter of cross-section of frame, 1.2mm. weight 1.12g. Discussion: Brooches of t…
Created on: Wednesday 23rd September 2020
Last updated: Wednesday 28th July 2021
Spatial data recorded.


  • Thumbnail image of NMS-8D314E

Record ID: NMS-8D314E
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Description: Gold finger-ring with posy inscription, now bent but still complete. The hoop is D-shaped in cross-section throughout with no bezel. The exterior is convex and the interior is flat, with the inscription I LIKE MY CHOYS in seriffed capitals. The first I is very lightly engraved compared to the rest of the inscription. There are small crosses between the words LIKE and MY (a diagonal cross) and MY and CHOYS (a more upright cross). There is a space-filling branching curved line after the end of the inscription, but still a gap between this and the start. The bends have …
Created on: Monday 21st September 2020
Last updated: Thursday 26th August 2021
Spatial data recorded.


  • Thumbnail image of NMS-E49F9B

Record ID: NMS-E49F9B
Object type: PENDANT
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Description: Gold pendant set with cabochon-cut gem, probably a garnet. The gem is smoothly polished, but is now cracked across its lower right-hand edge. It is placed on a gold backplate and surrounded with a gold strip collar, slightly curved transversely to fit around the stone; this is now cracked in places. The join between backplate and collar is covered with two layers of beaded gold wire filigree, now very worn, especially to either side of the suspension loop. The suspension loop is formed out of a projection integral to the backplate, which is now broken just above the body …
Created on: Tuesday 1st September 2020
Last updated: Friday 4th June 2021
Spatial data recorded.


  • Thumbnail image of NMS-3A996D

Record ID: NMS-3A996D
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Description: Gold hook element from a dress fastener, of composite construction, consisting of a hook (now incomplete) and an applied plate made from several elements. The applied plate is built up on a backplate made from a piece of circular sheet gold about 7mm in diameter. This has a vertical gold sheet collar soldered around the edge, which may originally have held a setting of glass, gemstone, etc. Around the collar is a separate outer frame of circular-section gold wire about 1.5mm in diameter, which has fine transverse grooves all the way round its surface. A butt joint i…
Created on: Monday 24th August 2020
Last updated: Thursday 20th May 2021
Spatial data recorded.


  • Thumbnail image of NMS-15F76C

Record ID: NMS-15F76C
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Description: Gold mourning ring of late 17th- or early 18th-century date. The hoop is of even width throughout, and is D-shaped in cross-section. It is decorated on the outer curved face in one place only, forming a bezel, where a simplified skull motif has been added by engraving. The skull is turned in a three-quarter pose, with each side made from a V-section groove which runs across the outside of the hoop in a curve. The face is made up of two hemispherical depressions for rounded eyes, a triangular nose between, and a short oblique groove above the nose. Below the…
Created on: Wednesday 29th July 2020
Last updated: Tuesday 25th July 2023
Spatial data recorded.


  • Thumbnail image of NMS-57A44C

Record ID: NMS-57A44C
Object type: COIN
Broad period: IRON AGE
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Gold, early local coinage, Iceni tribe, Norfolk wolf stater, Type B, sub-type Cii. Obverse; Abstracted bust based on coinage of Phillip II of Macedon left. Reverse; Norfolk wolf left with bird on rump. Circa 55-15BC. The coin is a silvery-pale-yellow colour indicating a high silver content to the alloy.
Created on: Wednesday 8th July 2020
Last updated: Sunday 19th July 2020
Spatial data recorded.


  • Thumbnail image of NMS-CB2CBE

Record ID: NMS-CB2CBE
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Description: Medieval gold seal matrix, oval with a centrally set oval stone intaglio and on the reverse a partly squashed sheet gold loop, probably attached with solder. The stone, probably carnelian but with slight banding, is engraved with an elephant in profile walking right (on the impression), with a castle or howdah on its back; it is the right way up when the matrix is held with the loop to the left and the start of the inscription below. The animal has four thick legs with flared feet, well modelled joints (hip and shoulder) and a tail with a rounded expanded end. The he…
Created on: Wednesday 1st July 2020
Last updated: Tuesday 14th September 2021
Spatial data recorded. This findspot is known as 'Near King's Lynn', grid reference and parish protected.


  • Thumbnail image of NMS-8FC367

Record ID: NMS-8FC367
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Norfolk
Workflow stage: Published Find published
Description: Crumpled and perhaps incomplete piece of gold sheet. It appears roughly circular in shape, but has one original straight side with a slightly burred thickened edge. This edge was c. 23mm long but is now bent about halfway along, with one half irregularly folded back on itself. The disc has a straight, slightly raised repoussé band parallel to the straight side and probably at the object's widest point; the band is about 3.5mm wide. Between this band and the straight edge are four rounded repoussé bosses which look like deliberate decoration, and seem too regular to be c…
Created on: Thursday 4th June 2020
Last updated: Thursday 12th May 2022
Spatial data recorded. This findspot is known as 'Near Holme Hale', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 400
Search server index: valhalla

You are viewing records: 61 - 80.

Search statistics

  • Total quantity: 691
  • Mean quantity: 1.728
  • Maximum: 136

Filter your search

Material

61 - 80 of 400 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.