Back to simple search | Back to advanced search

    You searched for:

    • Material:Gold
    • Institution:BM
    • Sort:objectType

  • Thumbnail image of BM-4D391D

Record ID: BM-4D391D
Object type: WIRE
Broad period: IRON AGE
County: Greater London Authority
Workflow stage: Published Find published
A small fragment from a thin gold wire strip 12.5 mm long, 2.0 mm wide and c. 0.25mm thick, was recovered from peaty marsh deposits that pre-date the construction of a Roman timber building on the site in the middle of the 1st Century BC.
Created on: Wednesday 18th May 2022
Last updated: Tuesday 26th September 2023
No spatial data available.


  • Thumbnail image of BM-A46342

Record ID: BM-A46342
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Devon
Workflow stage: Published Find published
A gold, short length of octagonal-sectioned rod (Length 19mm; diameter 9mm; weight 17g.), broken at each end. While ornaments made from octagonal-sectioned rod are known in the Bronze Age, there is insufficient evidence to place this piece chronologically or culturally. This object was reported as possible Treasure under the Treasure Act 1996, and subsequently declared not to be treasure.
Created on: Tuesday 16th August 2011
Last updated: Tuesday 16th August 2011
Spatial data recorded. This findspot is known as 'Rousdon', grid reference and parish protected.


  • Thumbnail image of BM-15AE47

Record ID: BM-15AE47
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Hampshire
Workflow stage: Published Find published
A crushed and distorted roll (apparently rolled six times) of very thin sheet-gold strip, narrow, and seemingly parallel-sided, the free (outer) end slightly damaged. No markings are visible.
Created on: Tuesday 3rd May 2022
Last updated: Wednesday 25th May 2022
Spatial data recorded.


  • Thumbnail image of BM-239133

Record ID: BM-239133
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Published Find published
A fragment of square-sectioned rod which is fairly evenly twisted, but with tighter twisting towards the torn ends. The flange-crests are rather rounded and in places flattened due to damage.
Created on: Wednesday 4th May 2022
Last updated: Wednesday 25th May 2022
Spatial data recorded.


  • Thumbnail image of BM-257960

Record ID: BM-257960
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Warwickshire
Workflow stage: Published Find published
A small fragment of gold sheet was discovered. The fragment clearly is part of a larger object, but unfortunately close examination has proved unable to establish from what object the fragment came. It is impossible to establish the date of the object from which the fragment came. Analysis of the metal content of the fragment was also unable to provide further help in dating the piece. The fragment was found to contain 91% gold. Dr JD Hill Department of Prehistory and Early Europe The British Museum London
Created on: Wednesday 4th May 2022
Last updated: Wednesday 25th May 2022
Spatial data recorded.


  • Thumbnail image of BM-0F7F58

Record ID: BM-0F7F58
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
A gold enamelled and jewelled object of yet to be determined use, possibly a pendant, dress-ornament or belt-fitting. Openwork cartouche, central white enamelled square setting containing a cut garnet, on cruciform with short arms within elaborate blue and white enamelled foliate frame. Triple-ribbed suspension loop, small pierced trefoil at foot. The back of the setting stands slightly proud within incised cruciform marking-out lines. A ‘6’ or ‘9’ incised on the back of the setting. The gold content was found to be approximately 92%, the inset stone is a garnet.
Created on: Tuesday 3rd May 2022
Last updated: Wednesday 2nd November 2022
Spatial data recorded.


  • Thumbnail image of BM-120F32

Record ID: BM-120F32
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Published Find published
A sub-rectangular gold binding, not a finger-ring, comprising a flat strip, 4 mm. wide and 0.77 mm. thick, decorated externally with a five-ribbed linear reeding. A butt join on one of the long sides is secured on the inner face by a small ?soldered strip (length 9 mm.).
Created on: Tuesday 3rd May 2022
Last updated: Wednesday 14th December 2022
Spatial data recorded.


  • Thumbnail image of BM-4B9175

Record ID: BM-4B9175
Object type: TORC
Broad period: IRON AGE
County: Norfolk
Workflow stage: Published Find published
The find consists of a single Iron Age twisted multi-strand style torc with ring terminals similar to others found in Norfolk over the last 60 years.  The torc has an internal diameter of approximately 20 cm.  It is made of predominantly gold and silver. It is made from four strands of wires twisted around each other two and a half times. Each of the 4 strands is made from 6 wires (c. 3 mm thick).  The strands are alternately twisted one clockwise and the next counter clockwise.  The strands were cast on to the terminals.  Evidence for this is clearly visible …
Created on: Wednesday 18th May 2022
Last updated: Friday 22nd March 2024
No spatial data available.


  • Thumbnail image of BM-9A7DD8

Record ID: BM-9A7DD8
Object type: SWORD
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Crumpled gold foil pommel cap ornamented with C scrolls executed in beaded filigree wire.  The pommel cap is badly damaged with both ends crushed and distorted and the filigree ornament on one face missing.   The surviving filigree is well made filling the surviving panel with a balanced pattern of graded pairs of loops with spiralled ends enclosing a central motif of an inverted ‘C’ scroll lying back to back with a kidney shaped element executed with two beaded filigree wires.   The panel is enclosed by a border of filigree wire, of a heavier weigh…
Created on: Wednesday 15th June 2022
Last updated: Thursday 4th January 2024
Spatial data recorded.


  • Thumbnail image of BM-5FCB75

Record ID: BM-5FCB75
Object type: SWORD
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Published Find published
Anglo-Saxon hilt fittings: pommel, upper and lower hilt fittings, part of upper guard, part of lower guard Gold sheet, gold filigree wire, cabochon garnets, copper-alloy, lead Early seventh century The pommel is of ‘cocked hat’ form and is made of gold sheet, decorated with filigree wire, over a lead forma.   The two faces of the pommel are filled with zoomorphic interlace in triple strand interlace, made with one broad band of beaded wire flanked by borders of a very fine beaded wire.   Each face is filled with a balanced design of interlacing zoomor…
Created on: Wednesday 24th August 2022
Last updated: Thursday 1st June 2023
Spatial data recorded.


  • Thumbnail image of BM-25EFE8

Record ID: BM-25EFE8
Object type: ROD
Broad period: BRONZE AGE
County: North Lincolnshire
Workflow stage: Published Find published
A contorted fragment of rod of triangular section; the faces are concave and the flanges formed at their junctions are therefore acute. A moderate double twist at a point where the rod is bent appears to be a deliberate feature, but elsewhere very slight twists are likely to be due to distortion. There are no cut-marks, nor any crushing at the breaks. Maximum dimension (in contorted state) 55 mm; approximate extended length 200 mm; thickness 2.5 – 3.1 mm; weight 14.4 g
Created on: Wednesday 4th May 2022
Last updated: Wednesday 25th May 2022
Spatial data recorded.


  • Thumbnail image of BM-261FA2

Record ID: BM-261FA2
Object type: RING
Broad period: BRONZE AGE
County: Norfolk
Workflow stage: Published Find published
The find comprises a loop of thick gold wire of roughly circular cross-section, the ends overlapping. Onto this are threaded nine rings, seven of which are of the type known as composite; two are simple rings. One of the latter (i) is a loop of gold wire with overlapping ends; the wire tapers from one end to the other. The other (ii) is a penannular ring of round-sectioned wire, the terminals close together. Of the composites: (iii) is a triple ring of three lightly C-sectioned strips probably soldered together. The terminals of one meet; the other two display a narrow gap. (iv) is a…
Created on: Wednesday 4th May 2022
Last updated: Wednesday 2nd November 2022
Spatial data recorded. This findspot is known as 'North East Norfolk', grid reference and parish protected.


  • Thumbnail image of BM-CDF17E

Record ID: BM-CDF17E
Object type: RING
Broad period: IRON AGE
County: North Yorkshire
Workflow stage: Published Find published
Knaresborough ‘Ring’. This find was discovered and reported before the Treasure Act 1996 abolished Treasure Trove in England, Wales and Northern Ireland. Circumstances of Discovery: On 9th June 1994 a gold ring was reported to the coroner for North Yorkshire by the owner who had recently purchased the find believing it to have been found in the Knaresborough area in North Yorkshire. It was said to have been an isolated find. The coroner reported that no information was available regarding the precise location of the find and the circumstances in which it was discove…
Created on: Tuesday 22nd November 2022
Last updated: Friday 19th May 2023
Spatial data recorded. This findspot is known as 'Knaresborough', grid reference and parish protected.


  • Thumbnail image of BM-1F56EE

Record ID: BM-1F56EE
Object type: PENDANT
Broad period: MEDIEVAL
County: Coventry
Workflow stage: Published Find published
Medieval gold pendant. A rectangular gold pendant with a suspension loop at the top and projecting pins at three of the corners. The fourth pin has been pushed inside the pendant. One side is crudely engraved with the head of Christ and the other with a half-length image of Christ as the Man of Sorrows. The pins are likely to have been designed to hold pearls, which have perished in the ground. Metal analysis conducted at the British Museum established the gold content to be 83% gold. Dimensions: 10mm x 12mm
Created on: Thursday 27th April 2017
Last updated: Thursday 27th April 2017
Spatial data recorded. This findspot is known as 'Coundon', grid reference and parish protected.


  • Thumbnail image of BM-F1D4E7

Record ID: BM-F1D4E7
Object type: PENDANT
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Published Find published
Gold and cloisonné garnet insect pendant with a suspension loop in the form of a biconical spacer bead. The pendant consists of a flaring bifurcated backplate cut with a triangular head which wraps around the back of the suspension bead which is soldered to it. The back-plate supports a single gold strip, soldered flush to its edges, whose ends form a poor butt join beneath the suspension loop. This frames the cloisonné cell-work which is made with thicker strips of gold sheet and laid out in a complex design which can be read …
Created on: Tuesday 7th June 2022
Last updated: Friday 2nd June 2023
No spatial data available.


  • Thumbnail image of BM-275770

Record ID: BM-275770
Object type: PENANNULAR RING
Broad period: BRONZE AGE
County: Hampshire
Workflow stage: Published Find published
Small penannular ring comprising a plain round to oval-sectioned hoop with flat terminals. The interior of the hoop and the flat terminal surfaces have not been polished. Gold content approximately 82%. The specific gravity at 16 is not low enough to indicate that the ring has a base metal core.
Created on: Wednesday 4th May 2022
Last updated: Wednesday 25th May 2022
Spatial data recorded.


  • Thumbnail image of BM-284683

Record ID: BM-284683
Object type: PENANNULAR RING
Broad period: BRONZE AGE
County: Norfolk
Workflow stage: Published Find published
Small penannular gold ring with decorative narrow banding in yellow and paler gold. The external surfaces are very worn. Visual inspection suggested that the piece consists of a gold covering over a base metal core; this was confirmed by scientific analysis. This is a well known Late Bronze Age type, decorative in character, dating to circa 1150-750 BC.
Created on: Wednesday 4th May 2022
Last updated: Tuesday 1st November 2022
Spatial data recorded.


  • Thumbnail image of BM-51E971

Record ID: BM-51E971
Object type: NECKLACE
Broad period: ROMAN
County: Darlington
Workflow stage: Awaiting validation Find awaiting validation
A fragment of gold jewellery possibly a necklace element dating to the Roman period. The fragment comprises a rectangular-section strip of gold wire which has been looped and bent to form an openwork motif, possibly a flower. This motif possesses four central circular loops and was possibly originally surrounded by four outer loops representing petals. Two fragments of circular-section gold wire are looped through the underside of the openwork element and secured by wrapping the wire around itself. The fragment has a length of 12mm, a width of 9mm and a weight of 0.46grams.
Created on: Friday 7th August 2015
Last updated: Monday 29th October 2018
Spatial data recorded.


  • Thumbnail image of BM-DE820D

Record ID: BM-DE820D
Object type: NECKLACE
Broad period: ROMAN
County: Darlington
Workflow stage: Published Find published
A fragment of gold chain from an item of jewellery, probably a necklace dating to the Roman period. The chain comprises three rectangular-section figure-of-eight links and six circular-section wire links with loops formed by wrapping the wire around itself. The arrangement of the links goes as follows: two wire links, one figure of 8 link, one wire link, one figure of 8 link, two wire links, joined by a smaller gold wire loop (perhaps a repair?), one figure of 8 link, one wire loop. The chain is 112mm in length and a maximum of 3mm in width. The chain weighs 1.1 grams.
Created on: Friday 14th August 2015
Last updated: Monday 29th October 2018
Spatial data recorded.


  • Thumbnail image of BM-495F62

Record ID: BM-495F62
Object type: NECKLACE
Broad period: ROMAN
County: Darlington
Workflow stage: Published Find published
A gold necklace clasp dating to the Roman period. The clasp comprises a circular-section tapering piece of gold wire which has been bent back on itself to form a hook. At the other end, the wire has been bent to form a circular loop and secured in place by wrapping the wire around itself four times. The clasp has a length of 16mm, a width of 5mm and weighs 1.22 gram.
Created on: Friday 19th December 2014
Last updated: Wednesday 2nd May 2018
Spatial data recorded.


1 - 20 of 127 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.