Back to simple search | Back to advanced search

    You searched for:

    • Material:Stone
    • Object type:WHETSTONE
    • Sort:institution
    • County:North Yorkshire

  • Image not taken

Record ID: YORYM-B0A094
Object type: WHETSTONE
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
Large hone stone. Roughly rectangular in section, with evidence of heavy or long-term use. Material is a fine-grained micaceous garnet schist (almost certainly from the same imported source as other local Honestones in the Yorkshire Museum collection) suggesting a late Anglo-Scandinavian date. The heavy wear may suggest prolonged use into the medieval period.
Created on: Tuesday 21st August 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Brompton-on-Swale', grid reference and parish protected.


  • Thumbnail image of YORYM-4C1CF5

Record ID: YORYM-4C1CF5
Object type: WHETSTONE
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
Incomplete stone whetstone of unknown date (c. 800 BC - 1900 AD). The whetstone is sub-rectangular in plan with a D-shaped section as it is flat on the bottom and rounded on the top. The whetstone has been broken at one end leaving a rough surface. The bottom surface is also rough while the top surface is relatively smooth on two sides and slightly pitted on the other. The stone is dark brown in colour with light brown patches. The length of the whetstone is 36.99mm with a width of 19.07mm and a thickness of 14.78mm. The weight of the whetstone is 19.96g. Whetstones are difficult…
Created on: Wednesday 4th October 2017
Last updated: Wednesday 25th October 2017
Spatial data recorded.


  • Thumbnail image of YORYM-88E389

Record ID: YORYM-88E389
Object type: WHETSTONE
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete probable Whetstone of Bronze Age to Post-Medieval date, c.AD 1000 BC - AD 1800. The object is made of a greenstone which is sub-rectangular in plan and section, tapering to one end. A worn break is present to the other. All surfaces are smooth and the edges are beveled. The smoothness and faint striations suggest the stone was used to sharpen metalwork. The object is 80.1mm long, 24.5mm wide, 14.7mm thick and weighs 52.2g. A similar object is recorded as NARC-B5F28C which cites excavated examples from Jones and Taylor (2010) which were excavated from Bronze Age con…
Created on: Friday 12th July 2019
Last updated: Friday 19th July 2019
Spatial data recorded.


  • Thumbnail image of YORYM-3825F8

Record ID: YORYM-3825F8
Object type: WHETSTONE
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete whetstone or hone of unknown date. The stone is rectangular in plan and cross-section. One end is rounded with a slightly off-centre circular suspension hole 10.14 mm from the edge. The other end is missing, with a rough worn and uneven break. The other surfaces are smooth, although there are some deep cut marks near the break. Whetstones such as this were probably used for re-sharpening blades of knives, scythes, axes and other tools. Whetstones are known from the Roman period onwards, however without decoration or context it is difficult to assign a defined date r…
Created on: Thursday 4th February 2016
Last updated: Thursday 11th February 2016
Spatial data recorded.


  • Thumbnail image of YORYM-68CB11

Record ID: YORYM-68CB11
Object type: WHETSTONE
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete hone or whetstone of Early-Medieval to Medieval date, c.AD 700-1400. The object is rectangular in plan and section, tapering in thickness from pierced end to a worn transverse break at the other. The wider end or top of the object is pierced with a circular perforation measuring 3.1mm in diameter. This appears to have been drilled from each face. Numerous irregular striations are visible on each face of the object. The stone is a hardstone which is black in colour and has no inclusions. The object is 34.9mm long, 19.9mm wide, 4.9mm thick and weighs 6g. It is likely…
Created on: Monday 23rd October 2023
Last updated: Tuesday 24th October 2023
Spatial data recorded.


  • Thumbnail image of WILT-E77056

Record ID: WILT-E77056
Object type: WHETSTONE
Broad period: NEOLITHIC
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
Incomplete sandstone probable hone stone, measuring 88.99x(max)70.71x(max)27.89mm and weighing 212.10g. The widest edge is also the thinnest, the incomplete stone being wedge-shaped and triangular in cross-section. Both faces display shallow grooves. Neolithic to Victorian in date, perhaps Prehistoric or Medieval/ Post-Medieval, given that hones between these dates tend to be long and narrow.
Created on: Tuesday 9th June 2009
Last updated: Friday 28th April 2017
Spatial data recorded.


  • Thumbnail image of SWYOR-DC6041

Record ID: SWYOR-DC6041
Object type: WHETSTONE
Broad period: MODERN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A rectangular block of hard, fine-grained, dark grey stone, probably used for honing blades. There are scratches and shallow grooves on all faces of the stone and one face has a more deeply incised transverse groove. It is 82.3mm in length, 24.5mm wide, and 25.2mm thick. It weighs 129.3gm. Hone stones have been used throughout history, but the regularity of this one suggests that is may have been machine cut, and so it is probably 19th or 20th century in date. It was lost before it was used very much, since no side is worn down into the hollow that is often seen. When cutting hay with…
Created on: Thursday 9th April 2009
Last updated: Friday 23rd March 2012
Spatial data recorded.


  • Thumbnail image of SWYOR-E7F3D5

Record ID: SWYOR-E7F3D5
Object type: WHETSTONE
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A semi-circular piece of fine grained soft red sandstone that has been ground flat on one side and on one face which are at right angles to each other. There are striations on both flat surfaces. It is 56.1mm long, 19.4mm wide, and 14.4mm thick. It weighs 22.11gm. The stone is very soft so may have been used as a polishing stone rather than a hone. It may also be natural, though the straight edges look to be man made. This sort of object is almost impossible to date.
Created on: Thursday 28th May 2009
Last updated: Friday 23rd March 2012
Spatial data recorded.


  • Thumbnail image of SWYOR-5756A4

Record ID: SWYOR-5756A4
Object type: WHETSTONE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A stone whetstone which is 56.6mm long, 14.5mm wide and 7.8mm thick. The stone is rectangular in section and is wider at one end. The narrower end may be an old break. There is a circular perforation in the wider end which appreas to have been drilled from one side. The stone is a very fine-grained purple-brown stone with small particles of mica (possibly a sort of metamorphosed slate?) which is quite soft; it can be marked with a fingernail. The date of this object is uncertain. Whetstones are known from the Roman period onwards, and without decoration or context are very hard to …
Created on: Friday 15th February 2008
Last updated: Tuesday 4th September 2012
Spatial data recorded.


  • Thumbnail image of SWYOR-5ABA34

Record ID: SWYOR-5ABA34
Object type: WHETSTONE
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A whetstone or hone which is 117.3mm long, 52.7mm wide and 34.6mm thick. The stone is sub-rectangular in plan with rounded corners. It appears to be a water worn pebble which has not been deliberately shaped. One face has been used as a whetstone though. This face is very smooth and worn, but the other have not been used and are rougher. There is a semi-spherical hole in one side face of the stone, closer to one end. This appears to be natural as there are no striations within the hole to suggest deliberate working. It may be the result of an air bubble or pocket less durable material…
Created on: Friday 15th February 2008
Last updated: Wednesday 4th June 2014
Spatial data recorded.


  • Thumbnail image of SWYOR-131B72

Record ID: SWYOR-131B72
Object type: WHETSTONE
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A piece of a quartz and mica rich sandstone whetstone of probable Post Medieval to Modern date, about AD 1700 - 1900. The stone is broken at both ends and is rectangular in section. It tapers and the two main faces are flat. The regular shape of this stone suggests that it is part of a manufactured hone or scythe stone. When in use, a scythe would have needed sharpening every 15 minutes or so, so hones were vital pieces of equipment for every farm worker. This example does not appear to have been used very much before it was lost, and the faces are not concave. It is 50.4mm long, 28.6…
Created on: Wednesday 9th June 2021
Last updated: Friday 25th June 2021
Spatial data recorded.


  • Thumbnail image of SWYOR-A2AB89

Record ID: SWYOR-A2AB89
Object type: WHETSTONE
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A waterworn and polished stone that may have been used as whetstone or hone stone, at an unknown date. The stone is broadly rectangular in pln and cross-section, though it is taller at one end, and that thcker end then tapers to a rounded point. The top and one side are flattened and there are faint striations, suggesting the stone may have been used. The other side is rougher and is probably natural. The base is smooth but undulating with some visible striations. The stone is fine textured and homogenous apart from the rougher face which has apparent inclusions of harder material that…
Created on: Tuesday 7th November 2023
Last updated: Monday 20th November 2023
Spatial data recorded.


  • Thumbnail image of LVPL-E2AB92

Record ID: LVPL-E2AB92
Object type: WHETSTONE
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
Worked object probably for use as a whetstone. The object is rectangular in plan and sub-rectangular in cross-section. Each end of the object is slightly rounded. The two sides of the object have both been worked and patterns of ware are visible. One side shows more use than the other, the centre of which is slightly convex. On the wider surfaces of the stone small inclusions of mica can be seen, however none are visible on the used sides. The stone is mid brown in colour. This object may have been in use from Pre-history to the Post-Medieval period. An exact date is unknown.
Created on: Tuesday 8th June 2010
Last updated: Thursday 24th June 2010
Spatial data recorded. This findspot is known as 'Birdforth', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 13
Search server index: asgard

You are viewing records: 1 - 13.

Search statistics

  • Total quantity: 13
  • Mean quantity: 1.000
  • Maximum: 1

Filter your search

Material

1 - 13 of 13 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.