Record ID: SUR-E91344
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A die-struck mount with a separate central pin. The mount depicts a crown over the letter M (probably for Mary).
Created on: Thursday 27th May 2010
Last updated: Wednesday 9th June 2010
Spatial data recorded. This findspot is known as 'Godstone', grid reference and parish protected.

Record ID: NLM-AC4C92
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy Mount. Pressed metal quatrefoil concavo-convex mount with central circular attachment hole of diameter 2.50mm; the appearance is vaguely floral. Suggested date: Later Medieval, 1350-1450. Length: 12.12mm, width: 11.43mm, Thickness (of sheet): 0.7mm, Weight: 0.57gms
Created on: Wednesday 12th May 2010
Last updated: Tuesday 22nd June 2010
Spatial data recorded. This findspot is known as 'Usselby', grid reference and parish protected.

Record ID: YORYM-C9C391
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
An incomplete, cast copper alloy strap fitting, probably a strap junction and probably of post-medieval date. The fitting is made up of a trefoil shape though two of the three lobes are broken, the object is flat. Each lobe of the trefoil is pierced by a circular hole through which straps would be secured. The metal is a mid blackish-brown colour and survives in good condition.
Created on: Tuesday 14th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Towton', grid reference and parish protected.

Record ID: CORN-A2A858
Object type: STRAP FITTING
Broad period: MODERN
County: Cornwall
Workflow stage: Awaiting validation
Pressed sheet copper alloy oval strap union and square plate, perhaps used as a book binding. The square cover plate has four rivets, two of which attach it to the folded trefoil fixing plate beneath, with a folded loop to hold the buckle. The other two rivets hold a narrow rectangular plate on the back of the cover plate. There are the remains of the leather strap, held by the rivets, between the front and both back plates. This suggests to the recorder that the object cannot be very old as organics do not survive well in the local acidic soil, unless preserved in anaerobic condition…
Created on: Tuesday 13th November 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: CORN-081460
Object type: STRAP FITTING
Broad period: MODERN
County: Cornwall
Workflow stage: Awaiting validation
Sheet copper alloy snake’s head strap end with punched detail on upper sheet and then soldered onto lower sheet which is plain, making it hollow within to take a leather strap. Likely to have been imported in relatively modern times from the East where the snake motif is more prevalent. The only comparable example that the recorder can find is as a terminal to an armlet or arm band made from sheet brass from Chinese Turkestan illustrated in Gerlach (1971) on page 76, Plate 38 No.19. 19th-20th century
Created on: Monday 27th June 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: CORN-580D44
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
Copper alloy strap fitting, moulded around a cylinder to produce a semi-circular section for the upper 20 mm, and beaten into a flat section at the lower end for the remaining 18 mm. The strap fitting was then punched with a ring-and-dot pattern, in three sets of three, which were divided by two sets of incised chevrons, pointing towards the flattened end of the strap fitting. There is one rivet hole at the end of the flattened section of the fitting and one at the other end, although only half of the hole remains in the centre of a collar made up of two ribs in relief; both ends are i…
Created on: Tuesday 27th July 2004
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: GLO-46E635
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation
Belt mount Medieval 13th-15th century Diameter 19mm, height 4mm, thickness 0.7mm sixfoil decorative belt mount made out of pressed sheet copper alloy, concave cross section, resulting in a dome that is 4.5mm tall, six petals emanating out from the centre, small rivet hole in the centre 1mm diameter, rivet missing. Dark green patina, with dark brown encrustation of both the outside and the inside surfaces.
Created on: Monday 7th June 2004
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Quenington', grid reference and parish protected.

Record ID: SF-737BD7
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
This object 20mm long, 10mm wide at the centre and 5mm thick overall, is a small gilt bronze fitting from a belt. Made of pressed sheet metal, it is domed in the centre, and the crest of the dome is cut away, making a hole. At either side are two smaller domed extensions each containing a very small iron pin for fastening the object to its receiving surface. As the object has been pressed out, the back is hollow. Solid cast examples similar to this shape are illustrated by Egan and Pritchard, Fig. 134.
Created on: Wednesday 10th December 2003
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Coddenham', grid reference and parish protected.

Record ID: LVPL1828
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Trafford
Workflow stage: Awaiting validation
Quatrefoil sheet copper alloy mount with separate central rivet.
Created on: Tuesday 10th July 2001
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'GREATER MANCHESTER WARBURTON', grid reference and parish protected.

Record ID: LVPL1829
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Trafford
Workflow stage: Awaiting validation
Sheet copper alloy circular mount with concentric circles and integral projecting trefoil with central separate rivet.
Created on: Tuesday 10th July 2001
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'GREATER MANCHESTER WARBURTON', grid reference and parish protected.