Database search results

Back to simple search | Back to advanced search

    You searched for:

    • Manufacture: Cast
    • Page: 14

  • Image not taken

Record ID: NMS-50A85A
Object type: WEIGHT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Probably medieval to post-medieval possible weight, a deep plano-convex sub-triangular lead object with a rounded and oblique blind hole in the flat face. 73 x 61mm. Thickness 31mm. Weight 731g / 11281 grains = 97.9% of 2 pounds troy (11520 grains). 13th - 16th century.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Thumbnail image of KENT-5095D7

Record ID: KENT-5095D7
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy floral mount of 15th-17th century date Description: The mount is formed of two sets of oppose trefoil lobes, one set vertically opposed the other hozrizontally opposed. in the for of petals or leaves. This detail is picked out with a border in relief as well as floral and vegative motifs also in releif within each of the lobes forming the petals and the centre of the flower. The back is undeccorated with a long tapering square section shank remaining intact. Both one of the lobes and the shank have been bent. Measurements: 25.45mm long, 16.1mm wide, 11.3mm thick (inc s…
Created on: Wednesday 5th April 2017
Last updated: Thursday 6th April 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-506E71
Object type: BELL
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval grey surfaced copper alloy crotal bell with an iron pea, non-drilled loop and gadroon ornament on the upper half. Height 33.2mm. Diameter 25.8mm. 17th - 18th century.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-504A4C
Object type: SPUR
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a slender post-medieval copper alloy spur, part of an oval-sectioned side with an asymmetrically set figure-of-eight terminal. Before the terminal the edges are scalloped (cf. BH-60E28B and LEIC-011345), and there are three very shallow, probably moulded, transverse grooves. Extant length 38.3mm. Width and thickness at the break 6.2 and 2.8mm. Width at terminal 18.8mm. 17th century.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-4FC860
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy button comprising a solid biconvex head with a central nipple and an integral non-drilled loop. Diameter 10.1 - 10.8mm. Length 16.7mm. 16th century.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Thumbnail image of HAMP-4FB7EC

Record ID: HAMP-4FB7EC
Object type: AMPULLA
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete medieval (1350 - 1500) lead pilgrim's ampulla, missing its neck and broken just above the rounded bottom half. The break appears to be old and the ampulla is rather squashed but rounded base remains intact. It is decorated on one face with longitudinal grooves radiating outwards from the broken edge, in the scallop shell pattern described by Brian Spencer (SSWM Medieval Catalogue Part 2) as type II. The opposite face has a sub-circular central section which is decorated with a raised cross-hatched pattern with the letter 'S' at the centre. Traces of a shallow rectangle ho…
Created on: Wednesday 5th April 2017
Last updated: Thursday 6th April 2017
Spatial data recorded. This findspot is known as 'Penton Grafton', grid reference and parish protected.


  • Image not taken

Record ID: NMS-4F9A27
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Just over half of a post-medieval black-lacquer coated copper alloy double-looped buckle frame, both loops oval, with a lobe at the ends of the bar and a crudely moulded rosette in the centre of the edge(s). The form is comparable with Whitehead 2003, no. 408. An example from Camber Castle was found in a context dated 1543-1637 (Biddle et al. 2001, 260, fig. 7.2 no. 27). Estimated length 49mm. Width 27.4mm. c.1550 - c.1650.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-4F85A3
Object type: RING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two medieval to post-medieval copper alloy rings of pointed oval cross-section. Possibly used in the suspension of drapes (Egan 1998, 62-4). Mid 14th - 16th century: - External diameter 24.5mm. Internal diameter 19mm. Thickness 1.8mm. - External diameter 23mm. Internal diameter 17mm. Thickness 1.6mm.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Thumbnail image of KENT-4F4592

Record ID: KENT-4F4592
Object type: SCABBARD
Broad period: MEDIEVAL
Workflow stage: Awaiting validation Find awaiting validation
An incomplete complete copper-alloy sword or dagger scabbard chape of medieval date, c 12th to 13th century AD. It is cast in one piece with a transverse fold to produce a symmetrical front and back plate and a U-shaped profile. It is trapezoidal in outline, with the remnant of a rivet hole placed centrally on one side of base of the chape. The plates are decorated with incisions, one face is decorated with a saltire, the other face is decorated with a vertical incision flanked by five transverse incisions. Weight:5.23g, length:16.62mm, width-upper edge: 22.25mm, lower edge: 14.92m…
Created on: Wednesday 5th April 2017
Last updated: Wednesday 19th April 2017
No spatial data available.


  • Thumbnail image of KENT-4F0C48

Record ID: KENT-4F0C48
Object type: CLASP
Broad period: POST MEDIEVAL
Workflow stage: Awaiting validation Find awaiting validation
Early post-Medieval (c.AD 1500-1650) cast copper alloy, one piece with moulded-relief on one surface, the other surface appears to be un decorated and is smooth, the aperture is well defined (width:11.45, length: 1.6mm). The hook has been lost at an historic break in the openwork collar. Early post-Medieval Class E, Type 2, shield shaped. Length:16.02mm, width: 15.52mm, thickness: 1.97mm, weight: 1.6g This clasp is similar to p.90, no.313; Hooked-Clasps and Eyes.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 19th April 2017
No spatial data available.


  • Image not taken

Record ID: NMS-4EE82C
Object type: RING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Distorted medieval to post-medieval copper alloy ring of pointed oval cross-section. External diameter c.23mm. Internal diameter c.18mm. Thickness 2mm. Possibly used in the suspension of drapes (Egan 1998, 62-4). Mid 14th - 16th century.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Thumbnail image of KENT-4EC4D7

Record ID: KENT-4EC4D7
Object type: BUCKLE
Broad period: MEDIEVAL
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Early-Medieval to High Medieval (AD 1000-1150) copper-alloy zoomorphic buckle fragment. The buckle survives only as a fragment roughly roughly a third of its full size and is sub-triangular shaped with a rectangular cross-section. The outer edge has a protruding sharp conical point likely a corner of a zoomormorphic design, with a head biting the bar at the top/outer edge. Between the head and point is a raised ovoid shape picked out by a ridge an opposing similar shape the other side of the point. There is a small nick and change in the frame shape at the bottom indicat…
Created on: Wednesday 5th April 2017
Last updated: Wednesday 19th April 2017
No spatial data available.


  • Image not taken

Record ID: NMS-4E9FAE
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy furniture fitting, a circular handle escutcheon, with pellets and inward facing arrows and an eight-pointed star in relief around a central round perforation. Diameter 21mm. See CAM-7F5A5C for a list of similar objects. Late 17th - early 18th century.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-4E75C5
Object type: POWDER MEASURE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Badly distorted post-medieval lead powder charge cap or measure, circular with a thickened rim, with two (squashed) pierced lugs at the closed end. Diameter at closed end c.18mm. Cf. Read 1995, no.1092. 17th century.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-4DDE14
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy ½-ounce avoirdupois trade weight, lathe-finished with a stamped sword, ewer and crowned EL (the royal cipher of Elizabeth I) on the flat front face within a raised rim. Diameter 29.5mm. Thickness 3mm. Weight 11.88g / 0.4190oz. 1558 - 1603.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-4DBF35
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy double-looped buckle frame, both loops oval with a narrowed bar. The sides and edges are covered with vine scroll ornament in counter-relief. Cf. Whitehead 2003, nos. 424-5. Length 30mm. Width 19.1mm. 16th century.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-4DAA9D
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Everted rim sherd of a medieval to post-medieval cast copper alloy cooking vessel. Diameter not accurately measurable. Weight 5.83g. 14th - 17th century.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-4D8044
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete post-medieval copper alloy button comprising a solid biconvex head and an integral non-drilled loop, part of which is missing. Diameter 10mm. 16th century.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-4D5E43
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete and badly distorted medieval copper alloy harness pendant, an elaborate quatrefoil frame within which a second pendant would have swung. The greater part of the suspension loop is missing. Cf. LIN-EF2662 and NMS-1E0D25. No metal coating has survived. Extant height c.35mm. Width c.32mm. 13th - 14th century.
Created on: Wednesday 5th April 2017
Last updated: Wednesday 5th April 2017
Spatial data recorded.


  • Thumbnail image of KENT-4D347B

Record ID: KENT-4D347B
Object type: VESSEL
Broad period: ROMAN
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A cast Roman (AD 100-200) copper-alloy, ram's head terminal, for the handle of a patera type pan. Description: The ram's head is moulded in relief with the horns curling around the ears with a moulded ridge between them on the top of the head. The face is solidly cast, with subtle defined but very clear facial features. The shaft survives only to a lmite extent flaring slightly from behind the head and is decorated with overlapping mouldings possibly implying a long fleece. The object is mottled various shades of light green and brown typical of patinated copper-alloy. Dimensions: …
Created on: Wednesday 5th April 2017
Last updated: Wednesday 19th April 2017
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 173,116
Search server index: objects

You are viewing records: 261 - 280.

Search statistics

  • Total quantity: 188,455
  • Mean quantity: 1.089
  • Maximum: 495

Filter your search

261 - 280 of 173,116 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.