Record ID: WMID-2465DB
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A clipped and heavily worn Medieval short cross silver penny of Henry III (r. AD 1216  to AD 1272). Triple pellet stops. Most likely Class 8, dating to AD 1242-1247. Moneyer and mint unknown, due to missing and faded legend. 
Created on: Friday 19th April 2024
Last updated: Friday 19th April 2024
Spatial data recorded.

Record ID: SUR-239143
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A silver Medieval long cross penny of Edward I (1272-1307), class 3b dating to 1280-1281. Bristol mint. As North 1017.
Created on: Friday 19th April 2024
Last updated: Friday 19th April 2024
Spatial data recorded.

Record ID: SUR-230CF0
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete medieval copper alloy single loop buckle frame with integral forked spacer, from a composite buckle. The frame is oval with a ridge across the rear edge. Most of the frame, the pin, one fork and both plates are missing. Circa 14th-15th century.
Created on: Friday 19th April 2024
Last updated: Friday 19th April 2024
Spatial data recorded.

Record ID: OXON-135132
Object type: COIN
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A silver medieval cut halfpenny of Henry III (1216-1272) voided long cross class IIIa-c dating to 1248-1250. Struck by Nicole at unclear mint. North (1994: 226): no: 986-88.
Created on: Thursday 18th April 2024
Last updated: Friday 19th April 2024
Spatial data recorded. This findspot is known as 'Newington CP', grid reference and parish protected.

Record ID: OXON-133A7C
Object type: COIN
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A silver Medieval voided long cross cut halfpenny of Henry III (AD 1216-1272), dating to AD 1250-1256. Class Va-b. Struck by Nicole at Canterbury. North (1994: 226-7), No: 991-2.
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Longwick-cum-Ilmer CP', grid reference and parish protected.

Record ID: WMID-1328C5
Object type: BUCKLE
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper-alloy buckle frame of Medieval to Post-Medieval date, circa AD 1250 - 1500. The buckle is D-shape in plan and single looped. It has a narrow and off-set axis bar and the outer surface has bevelled edges. The pin is missing, presumed lost in antiquity. The reverse is flat and undecorated.  The buckle is dark green in colour and has an even surface patina.  Measurements: length 22mm, width 12.2mm, thickness 3.4mm, weight 1.5 grams Whitehead (2003: p.19, Nos. 53 & 54) states that cast copper alloy single looped D-shaped buckles with …
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: GLO-132237
Object type: BROOCH
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation
A silver annular brooch that has a semicircular cross-section frame with a constriction to one side to mount the pin. The frame is decorated with four animal heads that are arranged into two set. The first group is bordering the constriction bar with the two heads facing each other and the bar in between. Each head has a raised, square cranium with pellet eyes in the two froward faceted corners and upwardly projecting knop ears above the rear two corners. The narrowed snout is bevelled on either side and grips the constriction between the two heads. This is mirrored on the opposite whe…
Created on: Thursday 18th April 2024
Last updated: Friday 19th April 2024
Spatial data recorded.

Record ID: OXON-1316D1
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A copper alloy medieval seal matrix, dating from AD 1200-1400. The matrix face is circular. The pedestal has six almost imperctible facets and each of these faces thin as they rise to a neck which first narrows and then widens slightly at its top. A pentagonal collar then creates a flat platform from which a rectagnualr cross sectionedd tab projects. This is trefoil shaped and there isa D-shaped projecting lug pierced by a circular hole extending from its apex. The seal face is round in shape, with the die depicting a letter W. The letter is surrounded by branches and has a crown abov…
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Forest Hill with Shotover', grid reference and parish protected.

Record ID: LANCUM-12F365
Object type: WEIGHT
Broad period: MEDIEVAL
County: Cumbria
Workflow stage: Awaiting validation
A lead alloy weight. It is circular but of uneven thickness. On one face is a pattern made of many lines, radiating from the central point, the other side is plain. The weight is uneven, and has a dark grey patina Dimensions: It is 33mm dimeter and 7mm thick maximum, it weighs 54.15g
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Near Brampton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-12DD8B
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete (clipped) silver medieval penny of William I, dating to the period AD 1195-c.1205. Short cross and stars coinage, Phase A. Uncertain mint and moneyer.
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Redgrave', grid reference and parish protected.

Record ID: WMID-12D2C7
Object type: AMPULLA
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lead alloy pilgrim's ampulla dating to the Medieval period, c. AD 1300 - 1500. The lead flask and a small amount of the neck remains.  The ampulla has a circular body and a neck that extends outwards from one end. The faces of the object would have been flat or slightly convex, but have been pressed in, or flattened. One side has moulded decoration present, consisting of radiating ribs, forming a scallop shell motif. The other side is undecorated.  The object measures 47.4mm in length and is 24.2mm wide at the …
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: LANCUM-12BD0E
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A biconical spindle whorl. It is foemd of two shallow cones joined with a relatively wide central band. It is decorated on both surface with a pattern of approximately three dots beween lines running perpendicular to the central hole. There is a modern scar across one face. It has an even, white patina Dimensions: It is 28mm diameter and 12mm thick, the central hole is 10mm diameter and it weighs 44.56g
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Near Topcliffe', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-12B7F4
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete (cut half) silver medieval penny of Henry III, dating to the period AD 1250-75. Class 5. Minted by Iohs of London.,
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Wortham', grid reference and parish protected.

Record ID: OXON-128F70
Object type: BUCKLE
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A fragment from an ornate rectangular double looped buckle probably dating from c.AD 1350-1700. Only the outer edge of the narrow frame survives. The frame fragment is rectangular in section and has what would have been a long edge that is narrower than the outer edge. This has a long projecting rectangular tab that projects 6.0mm from the frame. This tab has incised decoration on its upper surface consisting of two zigzag lines placed in a wavey pattern down the length of the buckle. The buckle has a dark green colour. The buckle is 31.8mm long, 16.1mm wide, 1.9mm thick includi…
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Great Haseley CP', grid reference and parish protected.

Record ID: SUSS-123265
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A complete Medieval silver farthing of Richard II (AD 1377-1399) Early bust type/Withers type 1g (North no. 1333a) dating to AD 1377-1399. Mint of London.  Diameter: 10.30mm and weight: 0.27g. 
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: SUSS-11EA8F
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A Medieval silver penny of Edward I (1272 - 1307), dating to AD 1300 - 1302. Class 10ab2, mint of Canterbury. North (1991) Volume 2, p 31 no 1038/1. Diameter: 17.25mm and weight: 1.14g. The flan is bent with a slight tear. 
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: SUSS-117668
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A worn and lightly clipped bent medieval silver halfpenny of Edward III (1327-1377);  Star marked coinage dating c. AD 1335-1343. Withers (2002) type 4(ii) or 5(ii). Mint of London. Cf. North (1991) number 1102/1.   Diameter: 12.81mm and weight: 0.56g. 
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-10B9C1
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete (cut half) silver medieval penny of Henry III, dating to the period AD 1250-75. Class V. Minted by Davi of London.
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Wortham', grid reference and parish protected.

Record ID: SUSS-10B5C2
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A worn and lightly clipped bent medieval silver halfpenny of Richard II (1377-1399) dating c. AD 1377-1399. Probably Withers (2002) type 2. Mint of London. Cf. North (1991) number 1331.  
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: SUR-105166
Object type: MOUNT
Broad period: MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A incomplete cast copper alloy penannular object, possibly a mount or a brooch frame. The object has a crescent shaped frame, 4mm thick, with bevelled sides and a triangular cross section which expands to the mid point where there is a small hole, possibly an articulation for a now missing pin, or a mounting point. The frame has broken in half across this hole. The remaining terminal at the end of the arm has a small rounded plates with a central hole, which could be decorative or for an attachment rivet. The surface of the object has traces of tinning.
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: SUR-0EB51D
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A Medieval trapezoidal copper alloy strap slide with separate rivet. The sides have a rectangular cross section with the front part having rounded edges. There is a drilled hole which holds a copper alloy rivet in the rear part of the frame. Circa 14th century.
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-0E3FE2
Object type: HARNESS
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy Medieval non-armorial harness pendant. It is worn,and  broadly crescent shaped, with an extant harness suspension loop. There is some visible decoration in the form of stamped circular dots, creating a lozenge shape. It's shape, decoration and design suggest an earlier date 12th/13th century, with similar shapes seen in Ashley, 2002, pg 5, fig 5, 1-3. Weight: 3.25g Width: 31.13mm Length: 34.53mm
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Acton', grid reference and parish protected.

Record ID: OXON-0DA0C2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A complete highly decorated Medieval single loop trapezoidal shaped buckle and floral strap plate dating to c. AD 1250-1500.  The buckle consists of an elongated trapezoidal buckle frame, an articulating pin and folded strap plate with quatrefoil applique. The frame of the buckle is an an elongated trapezoidal with an offset and slightly recessed strap bar. This is circular in cross section and narrower than the rest of the frame which is more of a bulbous oval in cross section. This has moulded decorative elements including a raised D-shaped knop projecting u…
Created on: Thursday 18th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-FEC37E
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy buckle plate of Medieval date. 1. Broadly retangular in shape, it tapers to a point, and has two integral lugs, and a circular perforation at one end.  Length: 42.55mm Width:19.59mm  Weight: 6.18g 2. Broadly rectangular in shape,there are two circular perforations Length: 26.59mm Width:21.54mm  Weight: 2.92g
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Little Waldingield', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-FEA144
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy medieval to post-medieval cast cooking vessel. It is a foot for a cooking vessel, which is rectangular in cross section. Cooking vessel such as this one were in use for a long period, first becoming common during the 13th and 14th centuries, with little change in form well into the post medieval period (Butler and Green 2003, 27). Height: 43.21mm, width: 30.44mm,  weight: 139.98g
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Little Waldingield', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-FE2286
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete, copper alloy, medieval, casket key, AD.1200-1500. The key has a flat circular loop. The shank is rectangular in plan, oval in section, and is hollow at the terminal. A T-shaped bit extends from the shank. Weight: 3.94g Length: 35.69mm Width: 16.95mm
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Acton', grid reference and parish protected.

Record ID: NLM-FD16F1
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy buckle. Small cast sub-rectangular frame with an expanded outer edge retaining a sheet metal roller, and with a pin looped round the narrowed and slightly offset strap bar. Suggested date: Late Medieval, 1350-1400 Length: 15.4mm, Height: 12mm, Thickness (frame): 2.4mm, Weight: 1.35gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Amcotts', grid reference and parish protected.

Record ID: NLM-FCF7E4
Object type: COIN
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Silver coin fragment. Probably a penny of Edward I (1272-1307), Durham mint, worn, with loss of nearly half the flan, possibly class 9a2 issue of 1299-1300 Obverse description: facing bust with trifoliate crown with small detailed jewels, right fleur almost touches adjacent spearhead. Initial cross probably potent. Obverse inscription: EDW[--](--) Reverse description: long cross, three pellets in each angle Reverse inscription: [--/--/]DVR/(--) Diameter: 16mm, Weight: 0.60gms, die axis: 3
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Amcotts', grid reference and parish protected.

Record ID: NLM-FCDBA9
Object type: COIN
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Penny, probably of Edward II (1307-1327), probably class 10cf5 issue of 1307-1310, Canterbury mint, assertively cleaned by the finder. Obverse description: facing bust with wide bifoliate crown 10cf5, initial cross pattee. Obverse inscription: +EDWA R ANGL DNS hYB Reverse description: long cross, three pellets in each angle. Reverse inscription: CIVI/[TAS]/CAN/TOR Diameter: 17.6mm, Weight: 1.17gms, die axis: 12
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Amcotts', grid reference and parish protected.

Record ID: NLM-FC8503
Object type: COIN
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Penny of Stephen (1135-1154), possibly Stafford mint (Spink  2017 page 147: Anglo-Saxon and Norman mints) or London [see reverse reading], profile right, assertively cleaned by the finder. Obverse description: crowned bust right with lis-topped sceptre before face, star of seven points with central pit in lower right flan. Obverse inscription: [--]TIFEN[--] Reverse description: cross within eight arched tressure, a lis pointing inwards in each angle, plain line inner and outer circles. Reverse inscription: [--]ON/DVN/I.[--] Diameter: 19.0mm, Weight: 1.11gms, die …
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Amcotts', grid reference and parish protected.

Record ID: SUR-FBD4D9
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A medieval cast lead alloy personal seal matrix with a flat circular die, 29.1 in diameter, which depicts a curled vinescroll motif with surrounding legend S' ROBERTI WICLVS or sigillum (seal of) Robert Wiclus. There are two stumps from an integrally cast suspension loop on the top edge. The reverse is blank.
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-FB85DD
Object type: JETTON
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy jetton. A large module French hammered jetton, later medieval issue of 1350-1400 Obverse description: possibly square or angular feature. Legend present but indistinct. Reverse description: probably a cross with a lis at the end of each arm, a crown is visible in one angle. Circumferential legend present but indistinct. Diameter: 27.9mm, Weight: 4.86gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: SUR-FB24BB
Object type: COIN
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An extremely worn silver medieval short cross penny of Henry III, class 7c dating to 1236-1242. Moneyer is LEDVLF at London mint.
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-FB1D8B
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
Medieval pottery consisting of; 8 body sherd  1 base sherd  14 rim sherd Weight: 435g
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Heveningham', grid reference and parish protected.

Record ID: GLO-FAF5A3
Object type: COIN
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation
A silver penny of Edward I or II Class 10cf3 Date c1307-1309 Obverse: crowned bust facing forwards EDWA R ANGL DNS HYB Reverse: long cross with three pellets in each angle CIVITAS LONDON
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: LANCUM-FAB4B5
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A lead alloy spindle whorl. flat on one face but domes on the other, Walton-Rogers Type A1. It does not appear to be patterned, and has an even, white patina.  Dimensions: It is 28mm in diameter and 8mm thick, the central hole is 8mm in diameter and it weighs 25.39g
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Near Wigglesworth', grid reference and parish protected.

Record ID: SUR-FAAFD6
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
A medieval cast copper alloy casket key, 39.9mm in length. The bow is oval with a pierced centre. The shank has a sub-rounded cross-section with a pointed end and there is a simple bit which is incomplete but which appears to have had two clefts. Circa 12th-15th century.
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: LANCUM-FA9BBC
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A lead alloy spindle whorl. It is circular and quite flat on both faces, but with rounded edges. It does not appear to be patterned, and has a brown patina. The small diameter of the central hole may suggest an early date. Dimensions: It is 28mm in diameter and 7mm thick, the central hole is 5mm in diameter and it weighs 27.75g
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Near Gisburn', grid reference and parish protected.

Record ID: SUR-FA9A8A
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
A medieval cast copper alloy casket key, 37.9mm in length. The bow is lozengiform with a pierced centre, a rounded terminal knop, flanking corner knops on either side and a small ridged collar. The shank has a sub-rectangular cross-section with a hollow end and there is a simple bit which is incomplete but which appears to have had a single cleft. Circa 12th-15th century.
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-FA9138
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A fragment rim-sherd of Medieval coarseware.  Weight: 6.67g
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Shotley', grid reference and parish protected.

Record ID: SUR-FA6D00
Object type: BUCKLE
Broad period: MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A small and undecorated cast copper alloy rectangular buckle frame of medieval date, 16.5mm in length.
Created on: Wednesday 17th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: LANCUM-FA22F4
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A lead alloy bi conical spindle whorl. It is circular and quite flat. The design is worn but would have originally been made of triangular shapes, possibly with dots. The edges have been distorted into a wavy, 'pie-crust' form Dimensions: It is 29mm in diameter and 7mm thick, the central hole is 9.5mm in diameter and it weighs 20.16g
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Near Long Preston', grid reference and parish protected.

Record ID: LEIC-F9CF95
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
A Medieval copper-alloy single looped buckle, dating to c.AD 1250 - 1450. The frame is D-shaped, it is undecorated with a straight strap bar. There is no evident pin rest. Length: 35.1 mm Width: 21.8 mm Thickness: 1.9 mm Weight: 5.4 g Pin length 24.4 mm
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: SUR-F9CF97
Object type: BUCKLE
Broad period: MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
An incomplete medieval cast copper alloy oval buckle, with an expanded and thickened front edge with a notched pin rest. Any decoration has been lost to corrosion. The strap bar has small lobes at either end, but has broken away and been lost
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-F8D07B
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy buckle. Cast sub-rectangular frame with an expanded outer edge with paired horizontal grooves defining a pin rest, with casting ridges at the outer sides of the frame at either end and with a narrowed strap bar. Suggested date: Late Medieval, 1350-1400 Length: 16.7mm, Height: 14.9mm, Thickness: 2.7mm, Weight: 1.55gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-F7FB07
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy buckle. Cast pentagonal double looped buckle frame, in the form of a ‘Tudor’ rose with inward-pointing stubs marking the former site of a constricted strap bar. Fiercely abraded; Whitehead (1996 page 47 nos 272- 274) illustrates examples of the type in better condition. Suggested date: Late Medieval to Early Post-Medieval, 1450-1550 Length: 40mm, Height: 37.5mm, Thickness: 2mm, Weight: 7.83gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Winteringham', grid reference and parish protected.

Record ID: NLM-F7B5AB
Object type: MOUNT
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy mount. Pressed sheet metal fleur de lis with a basal spike, slightly concavo-convex with inwardly crimped edges, and more generally curved as if it had been fixed to a staff or rod of rounded section. A rivet projects from the centre and there is rust staining within the hollow back. Suggested date: Late Medieval, 1350-1450 Length: 17.8mm, Width: 12.0mm, Thickness: 0.6mm, Weight: 0.64gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Winteringham', grid reference and parish protected.

Record ID: NLM-F795DA
Object type: COIN
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Silver coin fragment. A small part of a silver hammered coin which has been sharply folded at least twice into a tiny billet. The finder kindly suggests this may have been a cut half or quarter penny short or voided long cross penny, which could imply the period 11180-1278. The mass, however, points to a value of less than one half farthing for the fragment. Suggested date: Medieval, 1180-1278 Length: 6.1mm, Width: 5mm, Weight: 0.12gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Winteringham', grid reference and parish protected.

Record ID: OXON-E97592
Object type: SCABBARD
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
An almost complete copper alloy dagger scabbard chape of Medieval to Post-Medieval date (AD 1350-1500). The chape is U-shaped in plan, with a rounded knop at its apex. The front panel of the chape is decorated with a central vertical double ridge which terminates at the knop. To either side of the central ridge, there are three areas of openwork design, including a circular hole at the top, a rectangular hole in the middle and a smaller circular hole at the bottom (one of these smaller circular holes in slightly closed) - on the left hand side, due to damage, two of the hole…
Created on: Tuesday 16th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: NLM-E91184
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy probable buckle plate fragment. A trapezoid sheet metal fragment, straight-sided, with a large [diameter 4.5mm] if slightly ragged hole at its broader end, where it is broken. This hole may be the end of a slot or hole for the putative buckle pin and is larger than a rivet-hole. Two rivets of diameter 3mm pass through the plate on either side of this hole. There is a diagonal row of three low bosses at the middle of the plate, raised by stamping from behind. Before this, a rocker-work pattern of two adjacent saltires had been added to its display side. Close-spaced diagona…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Winteringham', grid reference and parish protected.

Record ID: OXON-E90F3A
Object type: SCABBARD
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A complete copper alloy narrow-pointed sword or dagger scabbard chape of Medieval to Post-Medieval date (AD 1300-1700). The small, conical chape is made of a single sheet of copper alloy that has been rolled into a conical tube with a single overlapping seam down the back.  The bottom has been cut into tabs which have been folded inwards to form a sealed, narrow-pointed base. There are two open, circular rivet holes along opposing sides of the top edge. The chape has a compact dark green patina all over, with some pitting to the back. The chape is 33.89mm long, with a…
Created on: Tuesday 16th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: SUSS-E8FE43
Object type: CANDLE HOLDER
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
An incomplete copper-alloy candle-holder of Late Medieval to Post Medieval dating, c.AD 1475-1600. The candle holder is incomplete, the cup and half the shaft surviving with the lower shaft lost to a worn break. The shaft and cup are circular in cross section, the shaft being decorated with a raised collar 18.47mm in diameter 9mm above the break in the shaft. The cup flares out from the top of the shaft with a slight circumferential recess, and a very worn circumferential linear double groove halfway up the cup, with another just before the rim of the cup. The rim of the cup is u…
Created on: Tuesday 16th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: NLM-E8DD76
Object type: STRAP END
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy strap end. A strap end of composite construction with two plates of thickness 0.9 and 0.4mm with a central probably forked spacer plate between them whose tip projects at the outer ogival end. The inner end is lightly engrailed. A rivet of diameter 1.7mm passes through the inner end to attach the plates to each other and the strap. A woven fabric strap remains preserved between the plates – the finder kindly notes he had kept the object wet to preserve what was at first thought to be a leather strap, as the find-spot was also damp. The use of a textile strap may deno…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Winteringham', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-E8C368
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Body sherd of medieval Grimston ware pottery, reduced with thick external lead glaze, weight 3g, 14th - 15th century.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E8BE9D
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Possible buckle plate fragment. A trapezoid fragment of cast copper alloy sheet with faint horizontal lines at its wider end and with an impressed slot at the other narrower end. Folded. A tiny aperture close to the edge at the wider end might be a tiny [diameter 1mm] rivet hole or fortuitous damage. Folded and abraded. Suggested date: Medieval, 1250-1400 Length: 14.5mm, Width/Height: 18.7mm, Thickness (sheet): 1.2mm, Weight: 1.67gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-E89A43
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Sherd of medieval Grimston ware pottery, narrow strap handle with two stabbed round holes, reduced with oxidised surfaces, abraded, with no extant glaze, weight 17g, width 33mm, 13th - 15th century.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: SUSS-E87062
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A complete silver medieval cut farthing of Henry III (AD 1216-1272) dating between AD 1248-1256. Long-cross class IIa or Vb. Probably mint of Canterbury. North (1991) no: 985 or 991. Dimensions: length: 8.63mm,  width: 8.11mm,  thickness: 0.72mm,  weight: 0.28g
Created on: Tuesday 16th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E86948
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Two body sherds of medieval Grimston ware pottery, both reduced and with external lead glaze, one with a brown slip trail, weight 5g, 13th - 15th century.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: SUSS-E80DA6
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A complete Medieval copper alloy casket key dating to c. AD 1150-1450. The bow of the key is circular with an oval cross section and internal diameter of 5.18mm. The solid stem is sub-rectangular in cross section, extending from the base of the bow and terminating in a projecting pin beyond the bit. The bit has a rectangular ward with clefts on each side forming an inverted 'T' shape. The key has a dark green patina, and is bent slightly to the left. Dimensions: length: 32.90mm,  width: 9.23mm,  thickness: 2.57mm,  weight: 2.43g Similar keys can…
Created on: Tuesday 16th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-E7DED1
Object type: MOUNT
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy mount. A cast rectangular plate which has been bent to penannular form. A series of incised chevrons appear on the outer side, though with a zone along one edge of the series undecorated. Probably originally of annular form with a butted seam, now partly flattened. Abraded. A function as a binding might be implied by the annular form. Suggested date: Medieval, 1200-1400 Length (as found): 19.5mm, Width: 7.4mm, Thickness: 1.5mm, Weight: 2.35gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: WMID-E7D1C2
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete and worn Medieval silver halfpenny of Edward I or Edward III (AD 1272 to AD 1377). Long cross reverse. Bifoliate crown. Minted in London. Parts of the outer flan is missing / damaged, resulting in a loss of some of the legend.  
Created on: Tuesday 16th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: NLM-E7C68F
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Pottery.  A fine sandy reduced fabric with a broad oxidised outer margin; body sherd from a vessel of estimated diameter 190mm at the point in its wall whence this fragment comes. Suggested date: Medieval, 1200-1350 Width: 66.5mm, Weight: 34.16gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: WMID-E7A7A4
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete Medieval silver penny of Edward I (AD 1272-1307). Long cross reverse. Trifoliate crown. Probably class 3cd, dating to AD 1280. Bristol mint. Part of the outer flan is missing, resulting in some of the legend missing.  North vol.2, no. 1018/19.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E7A4C8
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy unidentified object. A narrow straight-sided strip with a drilled rivet hole of diameter 1.7mm towards one end and possibly broken across a further hole at the other. The rivet hole may hint at a medieval date. A function associated with a strap or as a strap fitting might be implied by its narrow form. Suggested date: possibly Medieval, 1250-1400 Length: 29mm, Width: 6.6mm, Thickness: 0.7mm, Weight: 0.77gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: WMID-E76A8E
Object type: COIN
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A complete Medieval silver penny of Edward I (AD 1272-1307). Long cross reverse. Bifoliate crown. Probably class 10cf, dating to AD 1305-1310. Canterbury mint. 
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E705DC
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible buckle fragment. A part of what is taken to be the cast spacer plate from a buckle of composite construction, retaining the inner edge of a small single loop and a prong – presumably one of a pair. The lack of a hole for the pin might suggest that the spacer has broken across that aperture or may hint that the spacer was part of a strap end rather than a buckle. Suggested date: Late Medieval, 1350-1450 Length: 19.1mm, Width: 8.1mm, Thickness (at loop): 3mm, Weight: 1.47gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: SUR-E6CC68
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A mall cast copper-alloy Medieval single-loop D-shaped buckle with a slightly expanded front edge with a notched pin rest. The strap bar is narrowed and recessed.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E6A4D9
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy probable vessel fragment. Cast plano-convex section fragment from a cauldron leg with a pronounced moulded rib on its outer side, flat behind. Raggedly broken at both ends of its short remaining extent. This might suggest multiple casting flaws, the vigorous dismantling of an object for recycling, or recurrent plough-strike damage - pot legs are robust objects and this pattern of breakage is unusual. So too, for a cauldron leg, is the lack of sooting - though black spots were observed on the magnified views achieved during image processing, so this could have been part of …
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E66B8A
Object type: CAME
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead window came fragment. A short length of cast H-section window came with a trapped fragment of dark degraded glass at one end on one side. Patinated. This came would have permitted the setting of two small adjacent panes. The glass is reverting to its constituent ingredients, which is a feature of a medieval ‘forest’ glass made using potash, rather than the more robust soda glasses of earlier and later times. The width of the slot suggests a thickness of c.2.5mm for the panes. The reporting of window came of medieval date among field finds is remarkably rare. Suggested …
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: SUR-E63C54
Object type: BUTTON
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A lead alloy discoidal button of medieval date, 14.8mm in diameter. The face has a long cross with a pellet in each quarter, moulded in high relief. The reverse has stumps from an integrally cast loop shank which has broken off.
Created on: Tuesday 16th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-E59D2E
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy vessel fragment. Cast vessel leg with a single central longitudinal rib on its outer side and with a flat to slightly concave back. Tapered slightly towards a flat base; broken raggedly across the top. There is only a slight trace of sooting on the ribbed side, which might suggest this object to have been detached from an item of formal tableware such as a ewer rather than from a cauldron. Suggested date: Medieval, 1250-1350 Length: 50.9mm, Width: 29mm, Thickness: 8.1mm, Weight: 48.37gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: SUR-E598DD
Object type: COIN
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
A heavily clipped and worn silver Medieval penny of Henry VI, first reign (1422-1462), possibly Rosette-Mascle issue dating to 1427-1430. Saltires by the hair on the obverse, saltire stops on the reverse. Mint of York.
Created on: Tuesday 16th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: WMID-E530D1
Object type: COIN
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A worn silver short cross cut half penny of John (r. AD 1199-1216). Class 5, dating to AD 1204 - 1209. Obverse: Crowned bust holding sceptre. Legend: [hEN]RICVS R[EX]. Reverse: Short cross with a quatrefoil in each angle, Legend: +MIL[.......]E. Moneyer Miles. Winchester or Oxford mint. 
Created on: Tuesday 16th April 2024
Last updated: Friday 19th April 2024
Spatial data recorded.

Record ID: OXON-E51264
Object type: MOUNT
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A cast copper alloy Medieval figurative mount or strap fitting, dating to c. AD 1250-1500. The mount is in the form a pine cone or zoomorphic creature with a projecting stalk or snout, and with the ears, eyes, snout and mouth defined by incised lines. The sides of the mount are trapezoidal, narrowing to a ‘stump’ at the bottom with a raised triangular top. It has a cross hatch of grooves near the top edge. There is a central circular rivet hole. The front is convex and moulded, while the centre of the back is hollowed out in an sub-oval shape around the rivet hol…
Created on: Tuesday 16th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: NLM-E5109C
Object type: WEIGHT
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead weight. A small weight made by hammering an oval droplet of solidified lead melt leaving the imprint of the hammer-blow visible on one side, and then piercing a conical hole at a projecting lug from the same side. Patinated. Presumably for use with a fishing line. Suggested date: Medieval, 1200-1500 Length: 21.7mm, Width: 14.4mm, Thickness: 4.4mm, Weight: 7.75gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E48632
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy vessel fragment. Cast vessel leg of thin rectangular section at the top, where it is broken, and expanded and thickened at a flat-based foot of wedge-shaped profile. Two shallow longitudinal grooves appear on the outer side of the leg; the back is flat. Traces of sorting, thicker on the outer side, suggest the vessel saw use on a hearth. Suggested date: Medieval, 1200-1500 Height (in use): 42.6mm, Width: 36.6mm, Thickness (at foot): 16.3mm, Weight: 69.32gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E43C9D
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy vessel fragment, as kindly identified by the finder. A small cast tongue-shaped cauldron or pipkin leg, of plano-convex section, fiercely abraded, chipped on one edge and sooted on its outer side from use on a hearth. Suggested date: Medieval, 1200-1500 Length: 25.6mm, Width: 19.8mm, Thickness: 6.9mm, Weight: 13.32gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: OXON-E40A23
Object type: COIN
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A Medieval silver long cross farthing of Edward III (AD 1327-1377), Farthing uncertain class dating to AD 1327-1377. London Mint
Created on: Tuesday 16th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: NMS-E3DE98
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Silver groat of Richard III, London, initial mark sun/rose, North 1679, weight 2.99g, little wear, 1483-5
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: OXON-E3CEA8
Object type: COIN
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A clipped Medieval silver long cross halfpenny of Richard II (AD 1377-1399), dating to AD 1377-1399. Mint of London. Withers and Withers (2005: 50), Type 4 (based on the shape of the crown) or Type 5 (based on the misalignment between chest/neck and head). North (1991: 63), no. 1332.
Created on: Tuesday 16th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: NLM-E3A1B2
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Tealby penny of Henry II (1154-1189), issue of 1158-1180, as kindly identified by the finder. Obverse description: bust left, sceptre before face. Legend at edge of flan not deciphered. Reverse description: cross potent with a crosslet in each angle. Initial cross potent. Reverse inscription: +hENRI.ON:S:[--] Diameter: 20.1mm, Weight: 1.38gms, die axis: 12
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Faldingworth', grid reference and parish protected.

Record ID: NLM-E388CA
Object type: MOUNT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy mount. Cast bar mount with a central concavo-convex boss wih incised horizontal grooves and opposed rounded lobes for attachment, one retaining a rivet of diameter 1.2mm and length4.4mm. Suggested date: Late Medieval, 1350-1400 Length: 19.4mm, Height (i.e. projection): 3.6mm, Weight: 1.71gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E340B0
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Long cross penny, probably clipped and certainly folded [in the same ‘open’ manner as NLM-E29D79 but with reverse outermost], probably of Henry V (1413-1422), York mint, possibly North no. 1403 Obverse description: facing bust with wide bifoliate crown whose ornaments may touch each other, cinquefoil/mullet to left of crown Reverse description: long cross, three pellets in each angle, central quatrefoil Reverse inscription: CIVI/TAS/EBO/[RACI] Diameter: 17.3mm, Weight: 0.86gms, die axis: probably 12
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: OXON-E306CE
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A silver Medieval cut halfpenny of Henry III (AD 1216-1272), class 5c-5i, dating to AD 1253-72. Struck by unclear moneyer at unclear mint. North (1994: 227) Nos. 993-999.
Created on: Tuesday 16th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: NLM-E2E439
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Probably a round long cross halfpenny or penny, issue of 1280-1483, York mint, very worn Obverse description: facing bare shouldered bust, tall probably bifoliate crown, inner circle – the latter possibly duplicated by double striking. Legend lost. Reverse description: long cross, three pellets in each angle Reverse inscription: CIVI/T[AS/EBO/RACI] Diameter: 16.3mm, Weight: 0.73gms, die axis: probably 3
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E2C22A
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Long cross penny of Edward I (1272-1307) class 4c issue of 1282-1289, possibly from a hoard with NLM-E29D79, so submitted to Treasure process, ref. TBC Obverse description: facing bust with wide trifoliate crown with nicked band left, drapery of angled wedges, long face with pointed chin, initial cross potent. Obverse inscription: +EDW R’ ANGL’ DNS hYB Reverse description: long cross, three pellets in each angle. Reverse inscription: .CIVI/TAS/LON/DON Diameter: 18.7mm, Weight: 1.32gms, die axis: 5
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E29D79
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Long cross penny, probably of Edward II (1307-1327), probably class 10cf5 issue of 1307-1310, folded with obverse outermost. Possibly from a hoard with NLM-E2C22A, so submitted to Treasure process, ref. TBC Obverse description: facing bust with wide bifoliate crown with curved band; initial cross pattee. Obverse inscription: +[E]DWAR [?]ANGL DNS hYB Reverse description: long cross, three pellets in each angle. Small lettering. Reverse inscription: [CIVI/TAS/LON/DON] Diameter: 18.4mm, Weight: 1.25gms, die axis: probably 6
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-D321AE
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Silver penny of John, short cross class 5c, moneyer Goldwine of Canterbury, well worn, c.1207-10
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D30121
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Silver penny of Edward III, florin type, London, reversed Roman Ns on obverse, lombardic on reverse, Type 4, North 1116, worn, 1344-51
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: NARC-D2E9A3
Object type: VESSEL
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
A complete copper alloy pot leg, from a cauldron, posnet or skillet of Medieval to Post Medieval date (AD 1200-1600). The object consists of the leg and foot and is broadly rectangular in cross section and L-shaped in profile.  The upper edge is recurved with both sides on the outer edges of which are circular apertures. The upper surface is decorated with a double central moulded rib that runs the length of the recurved portion, the lower projecting foot is decorated with two raised transverse lines. Cast copper alloy vessels were widely used…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: SOM-D2E0D1
Object type: CHAPE
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
 A small, conical copper alloy sheet metal dagger scabbard chape of medieval to early post medieval date (c 1300 -1500 AD). The chape has been made of a single piece of metal which has been cut and folded to join at an overlapping seam along the reverse. Some ddecoration exisits at the top opening of the chape consisting of two incised lines running parallel to each other around the circumfurance  of the chape, within which are two small circular motifs. 
Created on: Monday 15th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'North Curry', grid reference and parish protected.

Record ID: SOM-D2A313
Object type: COIN
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A Medieval silver cut half penny of Henry III (1216-72) dating to AD 1249 to 1250. Long cross class 3c. Minted by Nicole at either London, Canterbury or Winchester. North (1994, 226) no. 988. 
Created on: Monday 15th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'North Curry', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-D1B32E
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Gold quarter noble of Edward III, Transitional Treaty series, London, North 1224 with pellet and annulets at centre of reverse, weight 1.75g, die axis 2 o'clock, 1361-3
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D16FF6
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Silver cut halfpenny of Henry III, voided long cross type, moneyer Henri of uncertain mint, extremely worn, 1247-72
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D158F6
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Silver penny of Henry III, voided long cross class 3a, moneyer Nicole of London, worn, 1248-50
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: SUR-CEF488
Object type: HARNESS HOOK
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete medieval gilded cast copper alloy harness hook with an incomplete hook, a narrow shaft and a conical terminal which would have retained the hook in a mounting pivot. These objects are thought to have been used on medieval curb bits to attach reins ending in strap loops.
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: OXON-955B61
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper alloy late Medieval (c. AD1300-1500) 'disc-on-pin' buckle of Redmayne Type A4, consisting of the 'disc-on-pin' only. The pin comprises a flat sub-lozengiform plate, c. 1.7mm thick, from opposite ends of which project the points. One of the ends of the pin, which has a sharp point, points downwards to meet the frame. The upward-pointing point is less sharp (although this may constitute a break) and curves very slightly to the back. The disc has four in situ globular-headed rivets (each c. 5mm in diameter) at the cardinal points of the obje…
Created on: Friday 12th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-946572
Object type: JETTON
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy medieval French 'shield of France' jetton, dating to c.AD 1400-c.1500. Obverse: X AVE MARIA o GRACIA o -  'shield of France' with three fleurs de lis within the shield Reverse: Triple stranded straight corss fleuretty in 4-arched tressure; internal angls, 'v' - 'm' (x2); external angles, '. o . ' (x4)  c.f. Mitchiner 1988, 227, 683
Created on: Friday 12th April 2024
Last updated: Friday 12th April 2024
Spatial data recorded. This findspot is known as 'Sibton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-942E91
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper alloy probable medieval swivelling strap fitting. The object consists of a circular cross-sectioned hoop with a oval section projecting from one side. There is a circular hole, c.7mm at its widest point, through the centre of the oval section. The circular hole is faceted on both faces, suggesting that a moveable component was attached here originally. The cross-section of the hoop would also be unusual for a finger ring, suggesting a more practical function. It appears to have decoration on both sides of the frame of the hoop, leading to the oval projection, pos…
Created on: Friday 12th April 2024
Last updated: Friday 12th April 2024
Spatial data recorded. This findspot is known as 'Sibton', grid reference and parish protected.

Record ID: SF-9415B3
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy 'Limoges style' cross mount, enameled and gilded figurine depicting a saint (possibly the Virgin Mary),  dating c. AD 1100 - 1300. It is broadly rectangular in plan with the head centred on a circular projection representing a halo or nimbus. The upper surface of the figurine is convex and the reverse is concave except the circular halo which is flat. The body of the figure has two circular rivet holes pierced through it; one on the chest and one centred adjacent to the lower edge. The bottom of the mount…
Created on: Friday 12th April 2024
Last updated: Friday 12th April 2024
Spatial data recorded. This findspot is known as 'Sibton', grid reference and parish protected.