Back to simple search | Back to advanced search

    You searched for:

    • Institution: WMID

  • Thumbnail image of WMID-E2DEA2

Record ID: WMID-E2DEA2
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy, probable Aucissa-derivative, brooch dating to the Late Iron Age to Early Roman period (c. AD 20-75). The remains of the brooch consist of the partial foot with the remains of the catchplate and a short section of the bow. The bow is flat in section and the curve is slight. There is a small rivet towards the break in the bow. The remains of the brooch are very worn and corroded. A comparable example could be no. 341A in Hattatt (1989: 319, fig. 178). The overall dimensions are as follows: 54.69mm in length, 8.41mm in width, 2.66g in weight. 4.82mm in th…
Created on: Thursday 3rd January 2019
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-E27DBA

Record ID: WMID-E27DBA
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy contemporary copy of a nummus depicting an unknown emperor dating to c. AD 300-410. Unclear reverse type owing to post deposition damage. Overall dimensions: 18.39mm in diameter and 2.46g in weight.
Created on: Thursday 3rd January 2019
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-E268F5

Record ID: WMID-E268F5
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper alloy radiate of an uncertain emperor dating to c. AD 260-296. Reverse type depicting figure standing left. Mint uncertain. Coin edge is broken away at 1 o'clock on the obverse. Overall dimensions: 16.5mm in diameter and 1.69g in weight.
Created on: Thursday 3rd January 2019
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-E250DB

Record ID: WMID-E250DB
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy radiate probably of Victorinus dating to AD 268-270 (Reece period 13). Reverse type probably depicting Sol running left with globe and whip. Coin is slightly chipped around the edge. Overall dimensions: 16.28mm in diameter and 1.39g in weight.
Created on: Thursday 3rd January 2019
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-E232A3

Record ID: WMID-E232A3
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper alloy nummus of The House of Constantine dated to AD 330-335 (Reece period 17). Reverse type depicting Victory left on prow with sceptre and shield. Mint uncertain. Coin is chipped around the edge. Overall dimensions: 16.32mm in diameter and 1.56g in weight.
Created on: Thursday 3rd January 2019
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-E1EDAF

Record ID: WMID-E1EDAF
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An extremely worn Roman copper alloy sestertius or as of an uncertain emperor dating to c. AD 41-260. Reverse type depicts figure standing with spear in left hand, SC in lefty and right field. Mint unknown. Overall dimensions: 27.33mm in diameter and 8.14g in weight.
Created on: Thursday 3rd January 2019
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-E1C529

Record ID: WMID-E1C529
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy nummus of the House of Constantine dating to AD 330-335 (Reece period 17). [GLORIA EXERCITVS] reverse type depicting two soldiers with two standards. Mint unclear. Overall dimensions: 16.59mm in diameter and 1.86g in weight.
Created on: Thursday 3rd January 2019
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-E17471

Record ID: WMID-E17471
Object type: KEY (LOCKING)
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy key dating to the Roman period (c. AD 43-300). The remains of the key consist of the bow leading into the beginnings of the shank. The bow is trefoil-shaped openwork, with two of the three trefoils complete. The bow tapers into a square collar of two sections; the first with four raised ribs running equally around the collar, and the second section with three raised ribs running around the collar. From the square-sectioned collar the beginnings of the circular-sectioned shank emerge. The shank terminates after 5.32mm in a worn break. The object has a dark gre…
Created on: Thursday 3rd January 2019
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-CDE47A

Record ID: WMID-CDE47A
Object type: TOBACCO HOLDER
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete lead alloy handle from a tobacco box or jar dating to the Post Medieval to Modern period (c. AD 1700-1900). The object is in the shape of an octofoil with a central raised boss and concentric border at its centre. The petals of the octofoil spread out to form a sub-oval shape to the handle. A separately soldered shank extends from the reverse of the octofoil, which is slightly tapered in the middle. A separate circular washer or mount adheres at the opposite end of the shank and the broken end of the shank extends through to the other side. The object has a mid-grey patin…
Created on: Friday 21st December 2018
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-CDB428

Record ID: WMID-CDB428
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy double-looped, asymmetrical buckle dating to the Post Medieval period (c. AD 1575-1700). The buckle is of a simple design with one loop D-shaped and the opposing loop rectangular in shape. The central bar is flush with the edges of the frame. The buckle id roughly D-shaped in cross-section. The pin is no longer present. A slight rounded knop or is apparent on the outer edge of the rounded part of the frame, perhaps representing the remains of a pin rest. The object has a mid-green patina. A similar example can be seen in Whitehead (1996: 90) no. 561. The …
Created on: Friday 21st December 2018
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-CD4913

Record ID: WMID-CD4913
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy trade weight dating to the Post Medieval to Modern period (c. AD 1714-1820). The weight is circular in plan and is uni-faced. The front has a circumferential ridge around the outer edge so that the centre of the weight is inset. Stamped at the lower end of the depression is a GR surmounted with a small crown. The very centre of the weight is dimpled and there is an incised concentric circle immediately surround this. The reverse is flat and plain although slightly abraded. The object has a dark to mid-green patina. This type of trade weight is discussed in Bi…
Created on: Friday 21st December 2018
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-CCCD77

Record ID: WMID-CCCD77
Object type: TOY
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy toy miniature cannon dating to the Post Medieval period (c. AD 1650-1750). The toy cannon is of typical form. The cascabel has a globular knob and then expands into the first reinforce. The touch hole is placed on a circumferentially moulded band, which is concave towards its middle. The trunnions are centrally positioned and projected evenly to either side of the barrel. The barrel tapers slightly to a raised, moulded band, before flaring at the muzzle. It is decorated with a number of parallel incised double bands evenly placed along the barrel. The object …
Created on: Friday 21st December 2018
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-CC4690

Record ID: WMID-CC4690
Object type: JETTON
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A Medieval copper alloy Medieval French jetton of the 'King under canopy' series (AD 1326-1337), standing king holding sceptre in right hand Mitchener (1988:164) probably no 399. Jetton is heavily worn and clipped thus obscuring the issuer. Overall dimensions: 17.09mm in length, 14.52mm in width, 1.24mm in thickness and 0.78g in weight.
Created on: Friday 21st December 2018
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-CBF27E

Record ID: WMID-CBF27E
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval silver threepence of Elizabeth I (AD 1558-1603). Second Issue (North 1998) plain cross initial mark dating to AD 1578-9. London mint. North (1991: 135). Coin is extremely worn across both faces. Overall dimensions: 18.3mm in diameter and 1.19g in weight.
Created on: Friday 21st December 2018
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-CB9EF3

Record ID: WMID-CB9EF3
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval silver halfgroat of Charles I (AD 1625-1649). Similar to North 2302 but uncertain initial mark, dating to c. AD 1625-1649. Mint unclear. Roughly half the coin is missing having broken away in antiquity. Overall dimensions: 15.67mm in length, 10.94mm in width and 0.58g in weight.
Created on: Friday 21st December 2018
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-CB53F3

Record ID: WMID-CB53F3
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval silver halfgroat of James I (AD 1603-1625). First coinage (North 2076), lis initial marking dating to AD 1604-5. North (1991: 144). The coin has degraded around the left edge on the obverse, removing some of the legend. Overall dimensions: 16.63mm in diameter and 0.94g in weight.
Created on: Friday 21st December 2018
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-CB325D

Record ID: WMID-CB325D
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver farthing of Edward I (AD 1272-1307). Probably Class 4de (North 1054/1) dating to AD 1282-9. London mint. North (1991: 33). Overall dimensions: 14.53mm in diameter and 0.53g in weight.
Created on: Friday 21st December 2018
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-CACE31

Record ID: WMID-CACE31
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval silver half groat of James I (AD 1603-1625). Second coinage (North 2104) lis initial mark dating to AD 1604-5. London mint. North (1991: 146). The top edge on the obverse appears to have been clipped. Overall dimensions: 16.71mm in diameter and 0.82g in weight.
Created on: Friday 21st December 2018
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-BBE602

Record ID: WMID-BBE602
Object type: WEIGHT
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead weight or spindle whorl of unknown exact date (c. AD 43-1700). The object is roughly conical in shape with a flat base and a circular perforation truncating slightly off-centre of the object. The object is plain and undecorated with a white patina. Plain lead weights and spindle whorls were in use from the Roman period to the present day, therefore without any contextual information it is difficult to apply an exact date. A large number of this type of object have been recorded on the PAS database dated from the Roman to Post Medieval periods. Such examples include: DE…
Created on: Thursday 20th December 2018
Last updated: Friday 11th January 2019
Spatial data recorded.


  • Thumbnail image of WMID-BBC7AE

Record ID: WMID-BBC7AE
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead uniface token dating to the Medieval to Post Medieval period (c. AD 1300-1700). The design on the obverse depicts a raised cross quartering the face of the object, with a raised dot at the centre. The reverse is undecorated. The remains of a casting sprue can be seen along the edge. The token can be classified as Powell Type 12. The token has a light grey patina and the face is well worn. Lead tokens had a wide variety of potential uses such as use as tallies, gaming pieces, tickets, weights, etc. and are believed to have been locally produced; they are therefore diffi…
Created on: Thursday 20th December 2018
Last updated: Friday 11th January 2019
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 20,169
Search server index: objects

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 28,077
  • Mean quantity: 1.392
  • Maximum: 440

Filter your search

1 - 20 of 20,169 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.