Back to simple search | Back to advanced search

    You searched for:

    • Institution: WILT

  • Thumbnail image of WILT-113D27

Record ID: WILT-113D27
Object type: STEELYARD
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy steelyard (scale with beam arms of unequal length), of Roman period, probably dating between 1st and 2nd Century AD. Only the arm survives which is in three pieces. The steelyard is composed by longitudinal arm with notched calibratrions which is circular shape in cross-section and measures c. 270mm in length. On end of the arm widens into a circular knop (22.15mm in diameter) while the other extends into a rectangular shape plate with three holes for the attachement of the objects and weights. The plate measures 74.65mm in length and 21.55mm in width. …
Created on: Friday 1st June 2018
Last updated: Friday 1st June 2018
Spatial data recorded.


  • Thumbnail image of WILT-437686

Record ID: WILT-437686
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman Colchester Derivative brooch dating to AD 43-175. The brooch is incomplete, although the pin is bent and the top of the bow has been flattened slightly. The wings extend to the sides and at the ends have double vertical lines around the front of the wing. There is a slot at the centre for the hinged pin and the ends of the wings are closed with a small hole for the pin retaining bar. The bow lifts sharply from the centre of the wings and curves down to a small foot. The catchplate extends back from the lower part of the bow. The top half of the bow has two raised d…
Created on: Tuesday 22nd May 2018
Last updated: Thursday 31st May 2018
Spatial data recorded. This findspot is known as 'Downton', grid reference and parish protected.


  • Thumbnail image of WILT-431FA1

Record ID: WILT-431FA1
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy Roman brooch dating to c AD 25-60. All that remains of the brooch is the top of the bow, the wings and the top of the hinge. The brooch is likely to be a Rosette brooch as there appears to be evidence of a spring wrapped round a retaining bar. The fragment comprises wings which are split along the top. Rosette brooches typically have a spring mechanism to fasten them and it may be that the back of the wings have been pressed together to form a cylinder, or possibly the spring was damaged and the wings squeezed round so that the brooch could still be used. I…
Created on: Tuesday 22nd May 2018
Last updated: Thursday 31st May 2018
Spatial data recorded. This findspot is known as 'Downton', grid reference and parish protected.


  • Thumbnail image of WILT-428837

Record ID: WILT-428837
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A post medieval gilded tombac boss type button dating to c AD 1700-1800. The button is complete although some of the gilding has been worn away. The button comprises a circular flan with a raised down in the centre of the front which is surrounded by a raised rim. On the front, the button is decorated with a row of pellets around the edge of the button. This rim then drops to a section which is slightly convex with fine lines radiating from the centre. There is then the raised rim and the dome in the centre. On the back the button is undecorated, although it was gilded on the underside…
Created on: Tuesday 22nd May 2018
Last updated: Thursday 31st May 2018
Spatial data recorded. This findspot is known as 'Downton', grid reference and parish protected.


  • Thumbnail image of WILT-4242B1

Record ID: WILT-4242B1
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A post medieval silver seal matrix dating to AD 1796-1797. The seal matrix is damaged and is missing the loop at the back for holding the matrix. The seal matrix is oval and depicts a sheep walking right. There is an incised line around the edge of the face. On the back the front plate steps inwards to an oval plate with the maker's mark around it and in the centre a raised round section which narrows and then extends transversely to created the curvilinear holding loop. There are five elements to the maker's mark. There is an anchor identifying the object as assayed at the Birmingham …
Created on: Tuesday 22nd May 2018
Last updated: Thursday 31st May 2018
Spatial data recorded. This findspot is known as 'Downton', grid reference and parish protected.


  • Thumbnail image of WILT-418945

Record ID: WILT-418945
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman radiate of Carausius dating to AD 286-293 (Reece period 14). The coin is worn. Obverse depicts a radiate bust facing right. Reverse is probably PAX AVG depicting Pax with a vertical sceptre and on the left hand field is the initial B or S. Uncertain mint.
Created on: Tuesday 22nd May 2018
Last updated: Thursday 31st May 2018
Spatial data recorded. This findspot is known as 'Downton', grid reference and parish protected.


  • Image not taken

Record ID: WILT-415587
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman barbarous radiate of uncertain emperor dating to AD 275-285 (Reece period 14). Uncertain reverse type depicting a standing figure. Uncertain mint.
Created on: Tuesday 22nd May 2018
Last updated: Thursday 31st May 2018
Spatial data recorded. This findspot is known as 'Downton', grid reference and parish protected.


  • Image not taken

Record ID: WILT-402EC9
Object type: COIN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A post medieval silver sixpence of William III dating to c AD 1697. GVLIELMVS III DEI GRA obverse depicting a laureate bust facing right. MAG BR FRA ET HIB REX 169[7] reverse depicting crowned cruciform shields. There is a double bend in the coin. Spink 3520-3548 (Spink, 2010, Coins of England & The United Kingdom 45th edition, Spink, London pp361-364, nos 3520-3548).
Created on: Tuesday 22nd May 2018
Last updated: Thursday 31st May 2018
Spatial data recorded. This findspot is known as 'Downton', grid reference and parish protected.


  • Thumbnail image of WILT-3FFCC2

Record ID: WILT-3FFCC2
Object type: COIN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A French copper alloy coin (probably a sol) of Louis XV dating to c AD 1771. LUDOV.XV D.GRATIA obverse depicting a laureate bust facing right. FRANCIAE ET NAVARRAE REX 177[1] reverse depicting a crowned shield with three lys. Probably mint of Troyes (mint mark V).
Created on: Tuesday 22nd May 2018
Last updated: Thursday 31st May 2018
Spatial data recorded. This findspot is known as 'Downton', grid reference and parish protected.


  • Thumbnail image of WILT-EC5C12

Record ID: WILT-EC5C12
Object type: SCABBARD
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy post-medieval dagger scabbard chape with pressed decoration. The chape has been squashed and is now 18mm wide and 4.2mm thick. The chape tapers towards the foot which is circular in cross section (6.2mm wide). The chape is decorated with machine pressed decoration consisting of two circumfernetial bands flanking plain sections with foliate deocration below. The band at the top is decorated with punshed stars, the central band is decorated with conjoined pellets with a central dot. The chape is 39.85mm in length, 18mm wide and weighs 4.32 grams.
Created on: Friday 18th May 2018
Last updated: Friday 18th May 2018
Spatial data recorded.


  • Thumbnail image of WILT-E9B3CC

Record ID: WILT-E9B3CC
Object type: FLAKE
Broad period: NEOLITHIC
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A Neolithic flint retouched flake, dating to the period 4500-2000 BC. This is a tertiary flake with no area of cortex remaining, broadly rectangular in shape and measuring 27.15mm in length, 16.1mm at maximum width and weighs 1.39 grams. No bulb of percussion is visible. The flake has slight retouch along one edge.
Created on: Friday 18th May 2018
Last updated: Friday 18th May 2018
Spatial data recorded.


  • Thumbnail image of WILT-E9A422

Record ID: WILT-E9A422
Object type: FLAKE
Broad period: NEOLITHIC
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A Neolithic flint flake, dating to the period 4500-2000 BC. This is a secondary flake with small areas of cortex remaining, broadly rectangular in shape and measuring 46.15mm in length and 25.55mm at maximum width. The bulb of percussion is visible and has a bulbar scar. The flint is a dark grey in colour. The flake weighs 9.13 grams.
Created on: Friday 18th May 2018
Last updated: Friday 18th May 2018
Spatial data recorded.


  • Thumbnail image of WILT-D5E961

Record ID: WILT-D5E961
Object type: THIMBLE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy bee-hive thimble dating from medieval to post-medieval period (AD 1400-1600). The thimble has a closed apex to its dome. Around the rim at the base of the thimble is a 1.4 mm smooth ridge or band. The thimble's body is covered with a series of punched holes in concentric rings which cease just before the apex to leave an undecorated 'tonsure' c 3.45 mm in diameter. The internal surface of the thimble is smooth and undecorated. The thimble is covered with a green patina. The thimble is 13.5 mm in height and 16.85 mm in diameter at the base; it weighs 3.26 grams.
Created on: Thursday 17th May 2018
Last updated: Thursday 17th May 2018
Spatial data recorded.


  • Thumbnail image of WILT-9ACC27

Record ID: WILT-9ACC27
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Swindon
Workflow stage: Awaiting validation Find awaiting validation
An incomplete post medieval copper alloy mount with integral suspension loop probably dating to the 16th century AD. It is made up of an upper plate, moulded, or hammered in the shape of a six petal flower with a large circular hole (8.37mm in diameter) drilled or cast slightly off centre. Something has broken away above the flower. Below the flower the mount narrows with a large oval loop (11.84mm x 9.70mm) at the end. This loop has split at the far end. The mount is slightly bent and is now 45.42mm in length, 20.67mm in width and weighs 9.59g.
Created on: Monday 14th May 2018
Last updated: Thursday 17th May 2018
Spatial data recorded.


  • Thumbnail image of WILT-9A701D

Record ID: WILT-9A701D
Object type: BROOCH
Broad period: ROMAN
County: Swindon
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy Aesica type brooch dating to the 1st century AD. This is a British development of a Roman brooch, possiby the Rosette type (Macreth). This brooch is missing its spring mechanism, pin and part of the catchplate. It probably had a rearhook mechanism although Hollow Spring type is possible. The hook or loop which would have been on top of the head, and would have held the spring, is now missing. The latter type is almost exclusively found found in Wiltshire, Dorset and south Gloucestershire. The wings are plain, C shape in section, curved to seat the spring…
Created on: Monday 14th May 2018
Last updated: Thursday 17th May 2018
Spatial data recorded.


  • Thumbnail image of WILT-9878F8

Record ID: WILT-9878F8
Object type: WEIGHT
Broad period: UNKNOWN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead weight of uncertain date. It is drop or spear shape in form, ovoid in section. The upper part is flat wth a rounded end and a central piercing. The lower end tapers to a point. One surface has raised markings which is probably decoration. It is 71.21mm in length, 26.94mm in width, 16.62mm thick. It weighs 101.75g.
Created on: Monday 14th May 2018
Last updated: Thursday 17th May 2018
Spatial data recorded.


  • Thumbnail image of WILT-41683D

Record ID: WILT-41683D
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Roman nummus of Licinius, dating to the period AD 317 (Reece period 15), IOVI CONSER-R-VATORI AVG reverse type depicting the Emperor standing looking left holding sceptre, thunderbolt and carried by eagle facing right. Mint of Aquileia. The coin appears to be unpublished in RIC. Cf RIC p. 373 no. 88 for similar reverse type.
Created on: Thursday 10th May 2018
Last updated: Friday 18th May 2018
Spatial data recorded.


  • Thumbnail image of WILT-413662

Record ID: WILT-413662
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Roman Nummus of the House of Constantine, dating to period AD 330-335 (Reece period 17) VRBS ROMA Wolf and twins reverse type. Mint of Trier.
Created on: Thursday 10th May 2018
Last updated: Friday 18th May 2018
Spatial data recorded.


  • Thumbnail image of WILT-1C66B8

Record ID: WILT-1C66B8
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A post medieval copper alloy coin weight of James I (in its revalued state) dating to AD 1604-1619. The weight is circular. The obverse depicts a crown over the value of IIII S /4 D 1/2 (4 shillings, 4 and a half pence). The reverse depicts a thistle flanked by the initials I R. Cf Withers, P and Withers BR, 2011, The Galata Guide to Coin-Weights Found in Britain: Lions Ships & Angels, Galata Print Ltd, Llanfyllin, p 20.
Created on: Tuesday 8th May 2018
Last updated: Thursday 31st May 2018
Spatial data recorded. This findspot is known as 'Downton', grid reference and parish protected.


  • Image not taken

Record ID: WILT-1BB4F9
Object type: COIN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A post medieval silver sixpence of William III dating to AD 1694-1702. The coin is worn and has a double bend. Obverse depicts a laureate bust facing right. Reverse depicts crowned cruciform shields. Uncertain mint. Spink 3520-3548 (Spink, 2009, Coins of England & The United Kingdom 45th edition, Spink, London pp 361-364, nos 3520-3548).
Created on: Tuesday 8th May 2018
Last updated: Thursday 31st May 2018
Spatial data recorded. This findspot is known as 'Downton', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 29,109
Search server index: objects

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 41,541
  • Mean quantity: 1.427
  • Maximum: 1,669

Filter your search

1 - 20 of 29,109 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.