Record ID: WAW-8FECE9
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
Workflow stage: Awaiting validation
A fragment of a copper alloy object, possibly a locking arm of a Medieval double loop 'locking buckle' (c. AD 1350-1450). The object is 24.54mm high and has a sub-rectangular cross section. There is a break at the top. The object tapers from 4.45mm wide and 4.09mm thick near the break, to 2.84mm wide and 3.09mm thick near the bottom of the shaft, before expanding to a maximum 4.08mm wide and 5.48mm thick on the lozengiform foot or knop. The object has a largely dull, dark grey patina with some cream coloured sections and small patches of possible white metal coating. The…
Created on: Friday 12th April 2024
Last updated: Thursday 18th April 2024
No spatial data available.

Record ID: WAW-7E034D
Object type: SPUR
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete copper alloy Post Medieval spur (c. AD 1600-1750). The rowel is missing. The gap between the terminals is 68.32mm and each terminal consists of a figure-of-eight double off-set loop that joins the arm at a moulded collar. The moulded collar is more pronounced on the right arm than the left arm. The main body of the frame is plano-convex, with a flat reverse and rounded front, giving the main body of the frame a D-shaped cross section. The main body starts off with a band width of 4.92mm and thickness of 2.48mm on the left-hand side, and a band width of 6.3…
Created on: Thursday 11th April 2024
Last updated: Friday 12th April 2024
Spatial data recorded.

Record ID: WAW-EAF58A
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
Workflow stage: Awaiting validation
An incomplete, copper alloy object, possibly casting waste of unknown date (c. 2400 BC - AD 1900). The object is sub-rectangular in plan and sub-rectangular in cross section. On one side, there is a raised, triangular section that is 6.41mm thick, after which the thickness drops to 3.78mm. The object then gradually expands in thickness until it is 6.52mm thick on the other side. In the centre, there are two main oblique, transverse grooves that run across the width of the object, with two sub-triangular indentations between them on the right-hand side. The reverse is largely flat, exc…
Created on: Thursday 4th April 2024
Last updated: Friday 12th April 2024
No spatial data available.

Record ID: WAW-56AF29
Object type: BROOCH
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete, copper alloy Roman Trumpet brooch (c. AD 75-175). The spring, pin, and part of the catch plate are missing. The surviving section of the head is sub-triangular in plan and is 11.52mm long and 11.62mm wide. The reverse of the head is slightly concave, with there being a more definite circular pit. The surface of the head is extremely worn, with there being remnants of moulded decoration, though it is unclear about the exact nature of the decoration. The bow is decorated with a triple element moulded knop below the head, with a larger, biconical knop flanked by two …
Created on: Thursday 28th March 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

Record ID: WAW-55E0D4
Object type: COIN
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete, extremely worn, copper alloy Roman coin, possibly a radiate or nummus dating c. AD 250-410. Uncertain emperor. Unclear reverse type. Diameter: 21.57mm. Thickness: 2.89mm. Weight: 3.33g. Die axis: Uncertain due to wear.
Created on: Thursday 28th March 2024
Last updated: Friday 29th March 2024
Spatial data recorded.

Record ID: WAW-5562DB
Object type: COIN
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete, extremely worn, copper alloy Roman coin, probably a sestertius or dupondius or as dating c. AD 43-250. Uncertain emperor. Unclear reverse type. Diameter: 28.57mm. Thickness: 3.26mm. Weight: 8.56g. Die axis: Uncertain due to wear.
Created on: Thursday 28th March 2024
Last updated: Friday 29th March 2024
Spatial data recorded.

Record ID: WAW-401E78
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A silver Early Medieval cut halfpenny of Edgar the Peaceful (King of Mercia etc AD 957-959; King of all England AD 959-975). Mint: possibly Chester. Moneyer: possibly Thurmod. The coin is cut in half from around half past 4 to around half past 10 on the obverse, and is bent at an angle around 1 o'clock on the obverse. See North (1994) pg.149 no.752. Length: 18.85mm. Width: 10.35mm. Thickness: 0.73mm. Weight: 0.74g. Die axis:
Created on: Wednesday 27th March 2024
Last updated: Wednesday 27th March 2024
Spatial data recorded.

Record ID: WAW-ADB04A
Object type: BROOCH
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete cast copper-alloy Roman Colchester Derivative Rearhook brooch dating 50-200 AD. The C-shaped wings appear to have a moulded pattern of vertical ribs running along the upper long edge. Each wing is decorated with two circular knops with verticle ribs attached via copper-alloy rivets that are clearly visibile on the rear of the wings. There is damage to the short edge of the right wing. A rearhook projects from the centre of the brooch head. The bow is damaged at the lower edge and the foot is missing. There is a horizontal …
Created on: Wednesday 20th March 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.

Record ID: WAW-31CE0C
Object type: FINGER RING
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Awaiting validation
An extremely worn, incomplete, copper alloy finger ring of probable Roman date (c. AD 43-410). Most of the hoop is missing, and the object only consists of the bezel and a small section of the hoop. The bezel is lozenge shaped in plan and is decorated with the worn remains of a moulded ring and dot pattern inside of a central round recess with a raised, circumferential border on the outside. There are objects that have been recorded on the Portable Antiquities Scheme database that are potentially comparable, such as SF-344BD5.
Created on: Thursday 14th March 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

Record ID: WAW-318C3E
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete, copper alloy (bronze) spearhead of Middle Bronze Age date (1550-1250 BC). The object is made up of two fragments, but has a leaf-shaped blade in plan. Fragment 1. This fragment is triangular in plan, as a lozenge shaped cross section (particularly the central rib) and consists of the tip of the blade of the spearhead. The break at the bottom is uneven, with a lozenge shaped projection on one side. Whilst the majority of the surface has a brown patina, the break and some patches over the surface of the object has a lighter green patina. Dimensions. Length: 50.…
Created on: Thursday 14th March 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: WAW-2D8838
Object type: BROOCH
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete, copper alloy Roman brooch, most likely a Trumpet brooch dating c. AD 100-250. Only the foot, catch plate, and part of the bow remain. There is an abraded break at the top of the object, which is followed by a central knop flanked at top and bottom by two raised discs and separated by them by horizontal grooves, with another horizontal groove after the bottom raised disc. The knop is decorated with two arched grooves, one facing upwards and the other downwards. After this groove, there is a shallow, short (c.2.85mm long) vertical groove remaining that leads from this, th…
Created on: Thursday 14th March 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

Record ID: WAW-2087A2
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
A copper alloy Roman nummus of Theodora (AD 337-341), dating to AD 337-340 (Reece period 17). PIETAS ROMANA reverse type depicting Pietas standing left suckling child. Uncertain mint.
Created on: Wednesday 13th March 2024
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: WAW-207A75
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete copper alloy Roman nummi of an unknown Emperor dating to the 4th century (Reece Period uncertain). Unknown reverse, possibly depicting a wreath. Uncertain mint. The coin is incomplete and very worn.
Created on: Wednesday 13th March 2024
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: WAW-205507
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete copper alloy, probable contemporary copy, Roman nummi of an unknown Emperor dating to the 4th century (Reece Period uncertain). Unknown reverse. Uncertain mint.
Created on: Wednesday 13th March 2024
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: WAW-203B38
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
A Roman, copper alloy, worn, dupondius or as dating to c. AD 100-200. Uncertain reverse type due to wear (Reece Period uncertain). Mint unknown. The coin is very worn and corroded.
Created on: Wednesday 13th March 2024
Last updated: Friday 15th March 2024
Spatial data recorded.

Record ID: WAW-201BA3
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Early-Medieval (late 5th to 6th centuries) possible saucer brooch made from gilded copper alloy. The brooch is sub-circular and has abraded and incomplete edges. The brooch has a border in light relief around the circumference. The brooch has been decorated in Style I with two beasts chasing each other around the brooch in light relief. The beasts circle around a centrally placed circular domed boss surrounded by a raised border. There appear to be three beasts depicted around the central boss. The beasts has pointed beaks or heads with oval eyes. The reverse is flat and wit…
Created on: Wednesday 13th March 2024
Last updated: Friday 15th March 2024
Spatial data recorded.

Record ID: WAW-06F4C2
Object type: BELL
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
An incomplete copper alloy Bell of Post-Medieval date, circa (AD 1600-1800). The object is conical shaped, with tapered sides, flaring out to the open edges. The top of the bell is narrowed and slightly rounded. At the apex projects a rounded, rectangular sectioned attachment loop with a circular perforation through the centre. The bell is decorated with two pairs of concentric circles, at its upper and lower edges with two further concentric circles surrounding the attachment loop. The iron clacker is missing, as is the internal attachment loop, although fragments of the remai…
Created on: Tuesday 12th March 2024
Last updated: Wednesday 13th March 2024
Spatial data recorded.

Record ID: WAW-05D1F7
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A Late Post Medieval copper alloy milled Irish halfpenny of George III (AD 1760-1820), London coinage with Type I bust and dated AD 1766. Spink (2015) no. 6612.
Created on: Tuesday 12th March 2024
Last updated: Tuesday 12th March 2024
Spatial data recorded.

Record ID: WAW-F14C78
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
A Roman copper alloy Colchester derivative (Polden Hill) brooch dating to circa (AD 80-120) of (Mackreth Group 3, flat wing ends) type Mackreth (2011), type 3e, Plate 46. The brooch is T-shaped in plan. The wings are cylindrical with damaged and incomplete end caps. The foot and catch plate are missing along with the spring and pin. There are the remains of a reverse facing hook at the reverse of the head that would have held the spring in place. At the reverse of the head is a rectangular slot that is concave. The bow is hump like in profile and the…
Created on: Monday 11th March 2024
Last updated: Wednesday 13th March 2024
Spatial data recorded.

Record ID: WAW-EFF372
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A Post Medieval silver half groat of Elizabeth I (AD 1558 - 1603), dating to the period AD 1560 to AD 1561 as part of the first coinage issue. Minted at the Tower of London. Mintmark: Cross crosslet. North vol 2, p133, no 1987. The coin is damaged and incomplete. 
Created on: Monday 11th March 2024
Last updated: Tuesday 12th March 2024
Spatial data recorded.

Record ID: WAW-EF5203
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A Post Medieval silver sixpence, possible dating c. AD 1660-1700. The coin appears purposefully smoothed possibly to form a 'love token' although the coin does not appear to have been bent. There appear to be a number of lines etched onto the coin. Due to the abrasion, the monarch and reverse are uncertain. Bust facing right.  The coin measures 20 mm in diameter, 0.76 mm in thickness. It weighs 2.34 grams.
Created on: Monday 11th March 2024
Last updated: Tuesday 12th March 2024
Spatial data recorded.

Record ID: WAW-EF315E
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A Post Medieval silver sixpence, possible dating c. AD 1660-1700. The coin appears purposefully smoothed and has a slight bend to form a 'love token'. Due to the abrasion, the monarch and reverse are uncertain. Bust facing right.  The coin measures 20.6 mm in diameter, 0.88 mm in thickness. It weighs 2.65 grams.
Created on: Monday 11th March 2024
Last updated: Tuesday 12th March 2024
Spatial data recorded.

Record ID: WAW-EF0F06
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A Post Medieval silver sixpence, possible dating c. AD 1660-1700. The coin appears purposefully smoothed and bent in two places to form a 'love token'. Then straightened by the finder. Due to the abrasion, the monarch and reverse are uncertain.  The coin measures 20.6 mm in diameter, 0.95 mm in thickness. It weighs 2.27 grams.
Created on: Monday 11th March 2024
Last updated: Tuesday 12th March 2024
Spatial data recorded.

Record ID: WAW-9D6268
Object type: PALSTAVE
Broad period: BRONZE AGE
County: County of Herefordshire
Workflow stage: Awaiting validation
A copper alloy (bronze) palstave of Middle Bronze Age date, probably of the Acton Park II/Taunton metalwork style (c. 1400-1250 BC). The cutting edge has a crescentic form with the tips recurving back onto the expanding form of the blade, though one side is more pronounced than the other. The maximum heights of the flanges on both sides are taller than the stop ridge height, with the flanges forming a leaf-shaped pattern when viewed from above. The septum is U-shaped and is largely flat, though it tapers towards the butt. There is a casting pit on one side against the stop ridge. …
Created on: Thursday 7th March 2024
Last updated: Thursday 11th April 2024
Spatial data recorded.

Record ID: WAW-9C3A26
Object type: BROOCH
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete, copper alloy Roman Colchester Derivative brooch of Polden Hill type 4. The pin, spring, and catch plate are missing. The head is 19.07mm wide (including the wings) and hump-like with arched mouldings present at the junctions with the wings, though these are heavily abraded. The wings are semi-cylindrical with semi-circular wing caps. There is no extant decoration on the wings. At the front of the head, there is evidence of a possible rearward facing hook and a possible moulded central rib that would have run from this down part of the head and bow. The bow has a D-shape…
Created on: Thursday 7th March 2024
Last updated: Friday 29th March 2024
Spatial data recorded.

Record ID: WAW-9BFE5C
Object type: BROOCH
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete, copper alloy Roman Colchester Derivative brooch of Polden Hill type 4. The spring, pin, left wing, and catch plate are missing. The head is 18.85mm wide, including the surviving right wing, and is hump-like with arched moulding present on both sides at the junctions between the head and the wings, though it is more heavily abraded on the left-hand side. The surviving right wing is semi-cylindrical with a semi-circular surviving section of the wing cap, though it is quite abraded. There is no extant decoration on the right wing. There appears to be the remains of a rearw…
Created on: Thursday 7th March 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded.

Record ID: WAW-9BA69B
Object type: COIN
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation
A Medieval silver voided long cross penny of Henry III (AD 1216-1272). Class 5 dating c. AD 1251-1272, possibly Class 5h dating c. AD 1265-1272. London mint. Moneyer: Iohannes. Cf North (1991) Vol.1 no.998. Diameter: 18.19mm. Thickness: 0.64mm. Weight: 1.31g. Die axis: 5.
Created on: Thursday 7th March 2024
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: WAW-9A248B
Object type: COIN
Broad period: POST MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete, Post Medieval silver halfgroat of Charles I (AD 1625-1649) dating AD 1625-1649. Possibly Group C, third bust. Cf. North (1991) Vol.2 no.2252. Possibly double struck due to there being a lower I behind the head and II at around 2 o'clock in relation to the fainter I. Appears to have been clipped from around 1 o'clock to around 6 o'clock on the obverse. Diameter: 15.81mm. Thickness: 0.64mm. Weight: 0.87g. Die axis: 3.
Created on: Thursday 7th March 2024
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: WAW-99C37C
Object type: COIN
Broad period: POST MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete, worn, Post Medieval silver halfgroat of Charles I (AD 1625-1649) likely dating AD 1638-1642. Aberystwyth mint. Initial mark: book. Cf North (1991) Vol.2 pg.172 nos.2343-2344. No inner circles. There is an oblique c.4.20mm long tear in the coin around 12 o'clock on the obverse, and part of the coin is bent upward from around 7 o'clock to around 12 o'clock on the obverse. Diameter: 16.37mm. Thickness: 0.57mm. Weight: 0.95g. Die axis: 7.
Created on: Thursday 7th March 2024
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: WAW-9947BB
Object type: COIN
Broad period: POST MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation
A Post Medieval silver threepence of Elizabeth I (AD 1558-1603) dating AD 1561. Second coinage. Initial mark: pheon. Mint: London. See North (1991) Vol.2 pg.135 no.1998. Diameter: 19.88mm. Thickness: 0.56mm. Weight: 1.24g. Die axis: 5.
Created on: Thursday 7th March 2024
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: WAW-888225
Object type: COIN
Broad period: IRON AGE
County: Worcestershire
Workflow stage: Awaiting validation
An Iron Age gold quarter stater of the Western Region / Dobunni, dating to the period c.20 BC - AD 10, Corio Cor type. Obverse: COR on plain field. Reverse: Triple-tailed horse right, pelletal sun ring above, small animal below. cf ABC, p. 105, no. 2051; BMC no. 3134; VA no. 1039.
Created on: Wednesday 6th March 2024
Last updated: Thursday 7th March 2024
Spatial data recorded.

Record ID: WAW-858677
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
An early medieval silver penny of Offa of Mercia (757-96), Light Coinage, dating c.784-92, moneyer: Winoth, mint: London (North 288). Ref: North 1994: p.86. A very similar coin has been found on the PAS database here: WILT-7FF13B.
Created on: Wednesday 6th March 2024
Last updated: Wednesday 6th March 2024
Spatial data recorded.

Record ID: WAW-21D40A
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, very worn silver Roman denarius of Hadrian (AD 117-138) dating to AD 117 (Reece Period 6). PARTHIC DIVI TRAIAN AVG F P M TR P COS P P, ADOPTIO (in exergue), reverse type depicting Trajan and Hadrian standing right and left and clasping right hands. Mint of Rome. Cf. RIC II no.3b. Diameter: 18.65mm. Thickness: 1.69mm. Weight: 1.68g. Die axis: 7.
Created on: Friday 1st March 2024
Last updated: Sunday 3rd March 2024
Spatial data recorded.

Record ID: WAW-2086C1
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
A worn, copper alloy Roman as of Claudius (AD 41-54) dating to AD 41-54 (Reece Period 2). LIBERTAS AVGVSTA reverse type depicting Libertas standing right, holding pileus. Uncertain mint. Cf. RIC I no.113. Diameter: 28.44mm. Thickness: 3.36mm. Weight: 10.29g. Die axis: 7.
Created on: Friday 1st March 2024
Last updated: Sunday 3rd March 2024
Spatial data recorded.

Record ID: WAW-0C4A52
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A post medieval lead, possible trade weight dated AD 1651. The object is circular with flat faces and slightly flared edges. The front face is decorated with a circular impression, within it is a coat of arms. The coat of arms has a chevron, within that is a cross at the centre, with a cutting knyfe to the left and shaver to the right. Above is a Jacobs staffe in the centre and a sounding leade either side. Below the chevron is a water level. Above the coat of arms is the date AD 1651. Either side of the coat of arms are initials, possibly T on the left a…
Created on: Thursday 29th February 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WAW-09E8E9
Object type: COIN
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A medieval long cross farthing of Edward II (AD 1307-1327), Withers Type 31 dating to 1310-1314. Mint of London.
Created on: Thursday 29th February 2024
Last updated: Thursday 29th February 2024
Spatial data recorded.

Record ID: WAW-09868E
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
A Roman copper-alloy nummus, of the House of Constantine dating to the period AD 335 - 341 (Reece period 17). [GLORIA EXERCITVS] reverse type depicting two soldiers and one standard. Uncertain mint.
Created on: Thursday 29th February 2024
Last updated: Thursday 29th February 2024
Spatial data recorded.

Record ID: WAW-08F613
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
A post medieval copper alloy (tombac) button dating to the 18th century. The button is flat and circular. At the reverse is an incomplete shank that would have extended into a loop to allow the button to be sewn to a garment. The front face is decorated with a multi petalled flower. There is a very similar design recorded by Bailey (2004) page 47, no 35. Bailey explains how the patterns on 18th century tombac buttons were hand engraved leading to great variation. The button has a polished possible high tin content which gives the appearance of silver. There are similar buttons…
Created on: Thursday 29th February 2024
Last updated: Thursday 29th February 2024
Spatial data recorded.

Record ID: WAW-F4D74B
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete copper alloy strap fitting or mount of post-medieval date (circa AD 1500-1700). The fitting consists of a sub-rectangular base plate that has a raised ridge down the centre. The small sides are incomplete and terminate at worn and broken ends. It has gilding present on the obverse. The reverse is flat and undecorated and has an off-centre integral pointed lug. The fitting is mid-green in colour with an uneven surface patina. The length is 20.3mm, the width is 12.5mm, the plate thickness is 2mm, the thickness including lug is 5.9mm, the weight is 1.4 grams.
Created on: Wednesday 28th February 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WAW-F47FB7
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A heavily clipped late medieval silver groat of unknown ruler (possibly Edward III - Henry VI). The outer flan is missing due to being heavily clipped, resulting in the outer legend being missing. On the reverse, the inner legend is in tact and reads: CIVI TAS EBO RACI. Minted in York. 
Created on: Wednesday 28th February 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WAW-F3E7DD
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete copper alloy shoe buckle frame of post-medieval date, circa AD 1720-1790. The buckle is rectangular in plan and has a drilled frame for a separate spindle. The spindle, chape and pin are missing. The buckle is convex with the highest point at the centre of the spindle. The smaller sides are decorated with 3 pointed ovals that each have a small pellet in the centre. Each corner is decorated with fove small mouldings surroinding a central pellet. The longer sides have a raised central pointed oval moulding and either side has decoration present, possibly a row of squares, …
Created on: Wednesday 28th February 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WAW-F3878D
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete copper alloy shoe buckle frame of post-medieval date, circa AD 1720-1790. The buckle is in two pieces and is sub-rectangular in plan and has a drilled frame for a separate spindle. The spindle, chape and pin are missing. The buckle is convex with the highest point at the centre of the spindle. The buckle frame is decorated with a series of semi circular scrolls at the corners and opposite the axis bar. The short edges have a central oval moulding with scrolls and linear moulded detail inside. The reverse is smooth and has no decoration present. Slight orange corrosi…
Created on: Wednesday 28th February 2024
Last updated: Monday 4th March 2024
Spatial data recorded.

Record ID: WAW-F27B03
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Probable late medieval silver half groat, in four fragments, too worn to identify ruler; possible annulet stop in legend.
Created on: Wednesday 28th February 2024
Last updated: Wednesday 28th February 2024
Spatial data recorded.

Record ID: WAW-F16461
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A post medieval silver groat of Elizabeth I (1558-1603), first coinage (1558-1561), initial mark cross crosslet, London mint.   North, Vol II (1991), No 1986
Created on: Wednesday 28th February 2024
Last updated: Wednesday 28th February 2024
Spatial data recorded.

Record ID: WAW-E60C64
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A post-medieval mount, dating to circa AD 1500-1800.  The object is oval in form, convex on the front and concave on the reverse. On the reverse is an integral spike which projects to a point. The object has a green coloured surface patina.  The mount measures 21.8 mm long and 11.3 mm wide. It is 7.6 mm in thickness. It weighs 2.3 grams.  Strap fittings have been in use from the late Medieval to Post Medieval period. Egan (2005; p. 39) comments that when they were used as dress accessories and continued on horse harness straps into the 18th century.&nbs…
Created on: Tuesday 27th February 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WAW-E59D22
Object type: MOUNT
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A complete copper alloy zoomorphic mount, stud or strap fitting of probable medieval to post medieval dating circa (AD 1200 to 1500). The object is in the shape of an animal head, perhaps a fox, wolf or bear and is broadly circular on the body. The front face of the mount is convex and the rear is flat. The front of the mount comprises two triangular projecting ears that extend beyond the upper edge of the mount. The eyes are rounded. The face then tapers to a pointed protruding nose. The mouth is not visible. The back of the mount is flat and does not have any evidence for …
Created on: Tuesday 27th February 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded.

Record ID: WAW-E521DA
Object type: CANDLE HOLDER
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete copper-alloy candle-holder of Late Medieval to Post Medieval dating, c.AD 1475-1600. The remains of the candle-holder include the shaft and cup. The separately made and fitted base is missing.  The remaining shaft and cup are circular in cross section. The upper edge of the cup is damaged. It has parallel sides. The shaft is decorated with a rounded collar halfway along the length of the shaft. There is an angled skirted collar just above the base. The bottom of the object is flat so it could be slotted into a base. The object has a green well d…
Created on: Tuesday 27th February 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WAW-DFEAEE
Object type: PADLOCK
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete post Medieval copper alloy padlock, dating to circa AD 1500-1850.  The object is one face of a padlock. The body of the object is broadly circular with a projecting lobe at each upper outer corner. An integral flat vertical rectangular bar is present running along the centre of the padlock face. This is decorated with a pair of vertical grooves adjacent to each long edge. There are three horizontal lines as decoration running across forming a grid pattern. The bar is flanked on either side by a double ring and dot motif. The i…
Created on: Tuesday 27th February 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WAW-8DAF76
Object type: DEBITAGE
Broad period: NEOLITHIC
County: Warwickshire
Workflow stage: Awaiting validation
Possible debitage of Mesolithic to Neolithic date (c. 10000-2350 BC). A secondary flake of opaque black flint with large amounts of cortex remaining on the dorsal surface and a possible hinge fracture along one side of the dorsal surface. Length: 27.18mm. Width: 17.96mm. Thickness: 5.82mm. Weight: 2.97g.
Created on: Friday 23rd February 2024
Last updated: Wednesday 28th February 2024
Spatial data recorded.

Record ID: WAW-8CC823
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete, copper alloy Roman Colchester Derivative brooch of Polden Hill type 4 dating c. AD 75-175. The foot, catch plate, right wing, spring, and pin are missing. The head is 15.38mm wide, including the left wing and the remnant of the right wing. The left wing is semi-cylindrical and has a pointed oval wing cap. There is no obvious extant decoration on the wing, except for a possible moulded rib on the end of the left wing. Part of the iron axis bar remains in situ in the left wing, with part of it protruding beyond the wing cap. The head is hump-like and there are&n…
Created on: Friday 23rd February 2024
Last updated: Friday 23rd February 2024
Spatial data recorded.

Record ID: WAW-7AE040
Object type: BROOCH
Broad period: ROMAN
Workflow stage: Awaiting validation
An incomplete, copper alloy object, possibly a Roman headstud brooch dating c. AD 75-200. The catch plate, foot, most of the bow, spring, pin, and parts of the wings are missing. The object has a sub-triangular shaped head that tapers from 22.38mm wide near the bottom to 8.35mm wide near the top of the head. There are two moulded, curved ribs that run from the wings to a roughly sub-oval shaped knop near the top of the head and the start of the bow. The reverse is undecorated, and there is the remains of an iron axis bar running across the width of the head. There is a sub-triang…
Created on: Thursday 22nd February 2024
Last updated: Friday 23rd February 2024
No spatial data available.

Record ID: WAW-759A27
Object type: CHAFING DISH
Broad period: POST MEDIEVAL
Workflow stage: Awaiting validation
An incomplete, copper alloy object, possibly a fragment of a chafing dish of late Medieval to Post Medieval date (c. AD 1400-1600). At the bottom of the object is a short remnant of a shank with a sub-oval to sub-rectangular cross section (9.35mm long, 8.51mm wide). This is decorated with two circumferential grooves, one near the bottom of the shank and the other near the top. At the top of the shank, the object branches into two, curved upward projections, forming a rough U-shape. Both of the projections have rectangular cross sections, though the right-hand projections (4.…
Created on: Thursday 22nd February 2024
Last updated: Friday 23rd February 2024
No spatial data available.

Record ID: WAW-7485D1
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An extremely worn copper alloy Roman nummus or radiate coin of uncertain date (c. AD 260-402). Uncertain emperor and uncertain mint. Uncertain reverse type. Diameter: 8.84mm. Thickness: 2.72mm. Weight: 1.12g. Die axis: uncertain due to wear.
Created on: Thursday 22nd February 2024
Last updated: Thursday 22nd February 2024
Spatial data recorded.

Record ID: WAW-73F9CB
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
A copper alloy Roman nummus coin of the House of Constantine (AD 307-361) and dating AD 348-351 (Reece Period 18). FEL TEMP REPARATIO reverse type depicting a phoenix standing on globe. Uncertain mint. Diameter: 17.64mm. Thickness: 2.47mm. Weight: 3.13g. Die axis: 2.
Created on: Thursday 22nd February 2024
Last updated: Thursday 22nd February 2024
Spatial data recorded.

Record ID: WAW-603F3C
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete copper alloy umbonate plate brooch dating to the Roman period, circa AD 100-250. Mackreth 2011, British Plate Type 6.a. The brooch has a domed boss which is circular in plan. Surrounding the centre of the brooch are inward facing triangular cells a number are filled with blue enamel. Some are damaged and missing the enamel. The outer edges of the brooch are also damaged.  The hinge extends from one short edge of the rim at the reverse. The projection is broadly rectangular and is damaged and incomplete. This would have originally&…
Created on: Wednesday 21st February 2024
Last updated: Tuesday 27th February 2024
Spatial data recorded.

Record ID: WAW-5EDD60
Object type: TWEEZERS
Broad period: UNKNOWN
County: Worcestershire
Workflow stage: Awaiting validation
A complete pair of copper-alloy tweezers dating from Roman to Medieval in date, circa AD 43 - 1500. The tweezers are enclosed around a solid mass of iron corrosion.  The tweezers are made from a single strip of copper alloy, folded over. Both arms of the tweezers are broadly parallel with one arm being flat and the other with a curve towards the other arm. The end terminals are blunt. The object has a green coloured surface patina with abraded surfaces. There does not appear to be any decoration on the arms. A large mass or iron alloy is attache…
Created on: Wednesday 21st February 2024
Last updated: Tuesday 27th February 2024
Spatial data recorded.

Record ID: WAW-5E3E95
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
An incomplete, silver dress hook of Post Medieval date (c. AD 1500-1600). Read Class B, possibly Type 2. The object is cast in two pieces with a circular plate and a silver wire attachment loop that was twisted in a way so as to create three separate attachment eyes, though only one of the eyes remains. There is a twisted wire filigree close to the outside edge of the circular plate, with five smaller circles made of twisted wire filigree around a central silver pellet. Sections of the circular plate are missing from around 2 o'clock to around 3 o'clock and around 10 o'clo…
Created on: Wednesday 21st February 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: WAW-5DFA0C
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
An incomplete, silver dress hook of Post Medieval date (c. AD 1500-1600). Read Class B, Type 2 (Read 2008 pg.159). The object is cast in two pieces with a silver circular sheet and a separate hooked-section. The circular sheet is slightly domed, being convex on the front and concave on the reverse. Around the edge of the circular sheet is twisted wire filigree. The outer face is decorated with a central cross and a circular rivet hole which attaches the hook to the main body of the object. There are four sub-rectangular wire cells at 90 degrees from each other at 2 o'clock, 5…
Created on: Wednesday 21st February 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: WAW-4BD496
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
A Roman copper alloy Colchester derivative (Polden Hill) brooch dating to circa (AD 50-100) of (Mackreth Group 5) type Mackreth (2011) probably 5a4, page 53, plate 50.  The brooch is T-shaped in plan. The wings are cylindrical with complete perforated end caps. The lower section of the bow, foot and catch plate are missing along with the majority of the spring and pin. The bow is hump like in profile and the bow tapers to an old break.  At the rear of the head is an integral pierced lug. There is a small section of coil remaning that passes through the pierced lug…
Created on: Thursday 8th February 2024
Last updated: Friday 9th February 2024
Spatial data recorded.

Record ID: WAW-4B93AF
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A complete Post Medieval halfgroat of Charles II (AD 1660 - 1685) dating from AD 1660 - 1662, no inner circles. Mint of London. North (1991) Vol II, no 2771. The coin has been bent and distorted. The coin has also been pierced from the reverse at 10 o'clock. 
Created on: Thursday 8th February 2024
Last updated: Friday 9th February 2024
Spatial data recorded.

Record ID: WAW-4AD748
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A lead alloy (pewter / tombac) two-part buckle of post medieval date 1660-1720 AD. The buckle consists of the buckle frame, separate spindle and chape and remains of a pin. The buckle frame is broadly sub-rectangular with rounded corners in plan and sub-rectangular in cross section. In profile the frame is bowed. The frame is drilled at the mid point for a separate copper alloy spindle. There is an integral chape with rounded stud at the outer edge. On the opposing side of the stud chape are the remains of the pin. The remains of the pin are triangular in form with a blunted e…
Created on: Thursday 8th February 2024
Last updated: Friday 9th February 2024
Spatial data recorded.

Record ID: WAW-0CC2B5
Object type: MOUNT
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation
A Roman copper-alloy mount, dating to circa AD 43 - 410.  A broadly circular mount with decoration and enamel inlay on the front face.The design consists of a central square that is slightly recessed with a coloured border. The circumference of the mount has the same width and coloured border. Each corner of the square has a small linear rib joining the square to the outer border. Surounding the square within the outer border are enamelled cells. Most of the colour has been lost now, although there are tiny traces of red enamel.  In the centre of the reverse is an inco…
Created on: Monday 5th February 2024
Last updated: Tuesday 6th February 2024
Spatial data recorded.

Record ID: WAW-FBE831
Object type: STRAP END
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, copper alloy sheet and rivet fitting, likely part of a composite strap end or buckle plate, of Medieval date (c. AD 1300-1400). The object consists of two flat, sub-rectangular sheets that are broken towards the bottom edge. There are two V-shaped notches cut into the upper edge, creating a tri-lobed edge. There is a circular rivet hole in the centre with the rivet in situ. The object has a dark green patina and there is compacted soil between the sheets. The object would likely have had a forked spacer between the two sheets when complete. A similar example is re…
Created on: Sunday 4th February 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WAW-FB7ADE
Object type: THIMBLE
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
A copper alloy sewing ring type thimble of late Medieval to early Post Medieval date (c. AD 1450-1550). The object is circular in plan and cylindrical, with both ends 'open'. The object tapers from a diameter of 19.11mm at the bottom to 16.68mm at the top. There is a plain border at the base and three concentric rings of punched circular indentations above it. The object has a light green patina. There are similar examples of ring brooches recorded on the Portable Antiquities Scheme database, including SF-5B56D2, PUBLIC-8D3A0C, KENT-E575C1, and SF-873…
Created on: Sunday 4th February 2024
Last updated: Friday 9th February 2024
Spatial data recorded.

Record ID: WAW-FB3C22
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, copper alloy Roman Colchester Derivative brooch of Polden Hill type. The spring, pin, bow, catch plate, and foot are missing. The head is 16.98mm wide, including the semi-cylindrical wings. The wings terminate in wing caps, though more of the right wing cap survives than the left wing cap. The wings are decorated with incised grooves at the junction of the wings and the wing caps and with oblique grooves that run from left to right. At the front of the head, there is a rearward facing hook and a central, moulded rib with a triangular cross section that runs from th…
Created on: Sunday 4th February 2024
Last updated: Wednesday 6th March 2024
Spatial data recorded.

Record ID: WAW-FAEDD9
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, copper alloy Roman Colchester Derivative brooch dating AD 50-175. The spring, pin, and wings are missing. The brooch is 9.48mm wide, with arched moulding at the junction where the wings would have met the head. There is a single moulded rib that runs along the brooch from the front of the head to around a quarter of the way down the bow, though the exact point at which it terminates is uncertain due to wear and abrasion. The head has a similar shape to the heads for SF-38EAD7, BH-32D060 and ESS-EB953C. There is, however, little evidence of there having been a …
Created on: Sunday 4th February 2024
Last updated: Wednesday 6th March 2024
Spatial data recorded.

Record ID: WAW-E8237E
Object type: DRESS HOOK
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, extremely worn, copper alloy dress hook, probably of Early Medieval to Medieval date (c. AD 850-1150). The object has a rounded, sub-oval body. At the top of the object, there are two rounded projections in each corner with a circular central perforation in each, though the top right-hand projection is missing a large section from around 1 o'clock to around 5 o'clock. There is a sub-triangular projection with the remains of a preceding collar at the bottom, with evidence of the bottom projection consisting of a hook, though part of the hook is missing.…
Created on: Saturday 3rd February 2024
Last updated: Friday 9th February 2024
Spatial data recorded.

Record ID: WAW-E7D1CD
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, copper alloy Roman Polden Hill type 4 brooch dating c. AD 75-175. The pin, foot, part of the spring, and part of the catch plate are missing. The head is 19.86mm wide, including the wings. The wings are semi-cylindrical; have sub-circular, pierced wing caps; and do not appear to have any decoration aside from an incised groove running along the length of both wings near the junction with the wing caps. The head is hump-like and on both sides there is arched moulding present at the junction between the head and the wings. There is a pierced central lug at the front …
Created on: Saturday 3rd February 2024
Last updated: Wednesday 6th March 2024
Spatial data recorded.

Record ID: WAW-E74682
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, copper alloy Roman brooch, either of Aucissa or Hod Hill type, and dating AD 43-75. The pin, foot, part of the bow, and part of the head are missing. The bow is largely sub-rectangular in plan and arched in profile. The head of the brooch is roughly sub-rectangular in plan. At the front of the head, there are the remains of a folded tube with a sub-oval cross section that is formed by rolling parts of the copper alloy sheet initially upwards and then back upon itself and cutting a sub-rectangular slot in the centre. The left-hand section of the …
Created on: Saturday 3rd February 2024
Last updated: Saturday 9th March 2024
Spatial data recorded.

Record ID: WAW-E6BA93
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, copper alloy strap end of Early Medieval date (AD 750-950). The object is an elongated sub-triangle in plan with slightly convex sides and an incomplete split terminal. Both sides of the split are largely missing, with no remnants of the circular rivet holes and the top part of the split terminal bending upwards. At the opposite end of the strap end, there is a pointed terminal that would have been decorated with a moulded and incised zoomorphic design, though this has largely been worn away. Above the pointed terminal, there are two punched annulets that may …
Created on: Saturday 3rd February 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WAW-D2DE01
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An extremely worn copper alloy Roman nummus coin of the House of Constantine (AD 307-361) and dating possibly AD 348-361 (Reece Period 18). Possibly FEL TEMP REPARATIO reverse type depicting a soldier advancing left, spearing a fallen horseman. Diameter: 14.16mm. Thickness: 1.63mm. Weight: 1.43g. Die axis: 1.
Created on: Friday 2nd February 2024
Last updated: Sunday 18th February 2024
Spatial data recorded.

Record ID: WAW-D25EBD
Object type: COIN
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
A worn Medieval silver penny of Edward I (AD 1272-1307) dating AD 1301-1310. Class 10, possibly Class 10cf1 (AD 1305-1310). London mint. See North (1991) Vol.2 pg.31-32 no.1038-1043. Diameter: 16.55mm. Thickness: 0.69mm. Weight: 1.04mm. Die axis: 11.
Created on: Friday 2nd February 2024
Last updated: Friday 9th February 2024
Spatial data recorded.

Record ID: WAW-D1EBC8
Object type: COIN
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
A worn Medieval silver penny of Edward I (AD 1272-1307) and dating AD 1294-1299. Possibly Class 8. London mint. See North (1991) Vol.2 pg.30 no.1034/1-1035. Unbarred 'N'. Initial mark: cross pattee. Diameter: 17.84mm. Thickness: 0.84mm. Weight: 1.30g. Die axis: 1.
Created on: Friday 2nd February 2024
Last updated: Friday 9th February 2024
Spatial data recorded.

Record ID: WAW-D168A8
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Worcestershire
Workflow stage: Awaiting validation
A fragment of a copper alloy (bronze) socketed axehead of middle to late Bronze Age date (c. 1300-800 BC). The fragment comprises the blade, above which is a worn and abraded break that reveals a shallow portion of the socket. The fragment is sub-trapezoidal in plan and has a triangular cross section. The blade is an asymmetrical crescent, which is possibly due to wear and abrasion. The angle of the right-hand side of the blade is steeper than that of the left-hand side. The broken edge of the axe runs at an angle inwards from the bottom before rising towards the top end of …
Created on: Friday 2nd February 2024
Last updated: Sunday 3rd March 2024
Spatial data recorded.

Record ID: WAW-BF4E3F
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, worn, copper alloy Roman nummus coin of Constantius II (AD 323-361) and dating to AD 335-341 (Reece Period 17). GLORIA EXERCITVS reverse type depicting two soldiers standing facing each other with one standard between them and an 'O' on the standard. Diameter: 14.23mm. Thickness: 1.83mm. Weight: 1.63g. Die axis: 7.
Created on: Thursday 1st February 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WAW-BBDA07
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
A complete copper alloy double loop buckle of Medieval to Post Medieval date (c. AD 1350-1650). The frame is made from two oval-shaped loops. The central bar has a sub-rectangular cross section and is thinner in the centre than it is at either the top or the bottom. The bottom, top, and outside edges have a sub-triangular cross section, with a flat reverse, a bevelled inside edge, and a moderately domed exterior. The pin is an open loop pin that has a rectangular cross section and tapers to a pointed tip that curves downwards. Both loops are bent slightly upwards. The object…
Created on: Thursday 1st February 2024
Last updated: Friday 9th February 2024
Spatial data recorded.

Record ID: WAW-BB4696
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, worn, copper alloy Roman radiate coin of Tertricus I (AD 271-274) and dating AD 271-274 (Reece Period 13). HILARITAS AVG reverse type depicting Hilaritas standing left, holding palm leaf and cornucopia. See RIC V Tetricus I no.80.1 for a similar example. There is a large lump of corroded copper alloy at around 11 o'clock to around 1 o'clock on the reverse. Diameter: 18.64mm. Thickness: 3.46mm. Weight: 3.22g. Die axis: 7.
Created on: Thursday 1st February 2024
Last updated: Sunday 18th February 2024
Spatial data recorded.

Record ID: WAW-BB05F3
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, very worn copper alloy Roman radiate coin of Tetricus I (AD 271-274) and dating AD 271-274 (Reece Period 13). VIRTVS AVGG reverse type depicting Virtus standing left with spear and shield. See RIC V Tetricus I no.148 for a similar example. Diameter: 18.88mm. Thickness: 2.12mm. Weight: 3.31g. Die axis: 1.
Created on: Thursday 1st February 2024
Last updated: Sunday 18th February 2024
Spatial data recorded.

Record ID: WAW-A306EF
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
A Post-Medieval copper alloy cup weight, probably for 2 oz avoirdupois. It is circular in plan and trapezoidal in vertical section.  It measures 35.4 mm in diameter at the top and 29 mm at the base. The wall thickness is c.8.5 mm and the height is 25 mm. The object weighs 59.6 g (2.1 oz).  It has a flat horizontal rim and a flat exterior base.  It is cast and turned on a lathe; there is a lathe centring point on the flat interior base.  There is some indication of file marks on the edge of the base. The rim has a turned incised line about 1 …
Created on: Wednesday 31st January 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: WAW-A27E38
Object type: COIN WEIGHT
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
A worn, copper alloy Medieval uniface coin weight dating c. AD 1464-1500. The coin weight is sub-circular in plan and has a sub-rectangular cross section. The obverse depicts a king with sword and shield standing in a ship with a rose. The reverse is seemingly undecorated. The object has a mid-green patina. The coin weight weighs 3.58g, which is just over 55 grains. A full weight Ryal would have weight 120 grains (7.78g), however, coin weights would have been made to the legal minimum weight for the coin. As well as that, the coin weight would have lost weight due…
Created on: Wednesday 31st January 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WAW-A22998
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, extremely worn copper alloy Roman nummus coin of Valentinian II (AD 375-392) dating to AD 388-392 (Reece Period 21). VICTORIA AVGGG reverse type depicting Victory advancing left, holding wreath and palm. Mint of Arles. See RIC IX Arelate 30a for a similar example. Diameter: 13.78mm. Thickness: 1.28mm. Weight: 1.15g. Die axis: 12.
Created on: Wednesday 31st January 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WAW-255020
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Seventeen Roman copper alloy radiate or nummi coins of unknown emperor - probably dating to the period AD 260 to 402 (Reece Period uncertain). Uncertain reverse. Mint unknown. The largest coin measures 18.3 mm in length, 17.1 mm width, 2 mm in thickness and weighs 2.9 grams.  The smallest coin fragment measures 11.3 mm in diameter, 1.8 mm in thickness and weighs 0.76 grams.  The coins number 17, however they have been discovered across the farm, we do not have an accurate findspot and believe these to be…
Created on: Thursday 25th January 2024
Last updated: Thursday 8th February 2024
Spatial data recorded.

Record ID: WAW-251FD7
Object type: KEY (LOCKING)
Broad period: UNKNOWN
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete possible Roman or medieval copper alloy casket key, dating to circa AD 43 - 1500. The key has an oval stem which is hollow at the outer end. The bit is missing. The key has a simple, flat, rectangular bit, with a semi -circular cut, either side of the long edge. The key has a gren coloured surface patina.  The fragment measures 23.4 mm in length, 10.4 mm in width, 3.4 mm in thickness and it weighs 2 grams. 
Created on: Thursday 25th January 2024
Last updated: Thursday 1st February 2024
Spatial data recorded.

Record ID: WAW-24DC0A
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, copper alloy book fitting of late Medieval to Post Medieval date (c. AD 1400-1700). The object is part of a three part hinged and hooked book fitting. The object is sub-triangular in plan and sub-rectangular in cross section. At the top of the plate, there are two attachment loops that are sub-rectangular in plan and sub-triangular to sub-rectangular in cross section and which appear to have been formed by bending the projections back upon themselves. Both of these retain parts of the now largely missing iron axis bar. In the centre of the object, there is a pierce…
Created on: Thursday 25th January 2024
Last updated: Friday 26th January 2024
Spatial data recorded.

Record ID: WAW-24B7E1
Object type: BRACELET
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete, copper alloy object, possibly part of a bracelet of Roman date circa (AD 43-250). The object is sub rectangular in plan and has a sub rectangular cross section. The object is curved. One small edge is damaged with a well developed surface patina. At the opposing short edge the object is decorated with three lobes. One large lobe in the centre and flanked either side with a smaller lobe. The central larger lobe has a central circular depression that appears to be deliberate decoration. The underside is un decorated. The object has a green coloured surface. Othe…
Created on: Thursday 25th January 2024
Last updated: Thursday 1st February 2024
Spatial data recorded.

Record ID: WAW-24577D
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
A fragment of a copper alloy Roman penannular brooch of Fowler (1960) Type A2 or A4. The object consists of a knurled knop and part of the hoop of the brooch. At the top of the knop is a sub-circular to sub-hexagonal disc (6.15mm wide, 6.38mm thick). The knop itself has an oval cross section, reaching a maximum of 9.28mm wide and 7.97mm thick. The knop is decorated with moulded knurling consisting of twisting ribs. Beneath the knop, there is a groove and the dimensions drop to 7.13mm wide and 6.41mm thick, after which there is a moulded collar that is 7.45mm wide and 6.52mm …
Created on: Thursday 25th January 2024
Last updated: Friday 26th January 2024
Spatial data recorded.

Record ID: WAW-244889
Object type: TWEEZERS
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
 A complete pair of copper-alloy tweezers dating from the Roman period, circa AD 43-410. The tweezers are made from a single strip of copper alloy, folded over to form a a defined loop to the top of the tweezers. Both arms of the tweezers are broadly parallel and curve towards each other at the end. The end terminals are blunt. The object has a green coloured surface patina with abraded surfaces. There does not appear to be any decoration on the arms.  There are many parallels recorded on the PAs database including: KENT-447996 and HAMP-2420A5 both …
Created on: Thursday 25th January 2024
Last updated: Thursday 1st February 2024
Spatial data recorded.

Record ID: WAW-120D45
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
Part of a probable C16 knife end-stop.  The object has one rounded end and one rectilinear, and is 21.2 mm high and 13.3 mm wide at the base, narrowing to 11.6 mm wide at the rounded top.  The base is straight, but with indications of projections at each end.  In cross-section, the object is slightly rounded on one face, and apparently flat on the other, although the flat surface is obscured by attached corrosion products.  The weight of the object, including the corrosion products, is 8.2 g. The rounded side shows a surface layer which has been…
Created on: Wednesday 24th January 2024
Last updated: Thursday 18th April 2024
Spatial data recorded.

Record ID: WAW-E3FF83
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete medieval copper alloy single loop buckle dating to circa AD 1250-1400. The buckle consists of an incomplete oval frame that is oval in cross section with flattened sides. There is moulded decoration on the outer edge forming four lobes and three transverse ridges. The strap bar is missing. The pin is also missing. The buckle has green coloured surface patina. The buckle measures  23.7 mm, 21.4 mm in width, 2.9 mm in thickness and weighs 2.4 grams.  Whitehead illustrates similar buckles on page 22, No.94. Whitehead, R. …
Created on: Monday 22nd January 2024
Last updated: Monday 22nd January 2024
Spatial data recorded.

Record ID: WAW-E3E323
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete medieval copper alloy single loop buckle dating to circa AD 1250-1400. The buckle consists of an oval frame that is oval in cross section. The outside edge is expanded with two outer lobes that are slightly pointed. There is moulded decoration forming six lobes and two transverse ridges. The strap bar is narrowed and inset, It is circular in cross section. The pin is missing. The buckle has green coloured surface patina. The buckle measures 31.6 mm, 23.1 mm in width, 5.6 mm in thickness and weighs 7.1 grams.  Whitehead illustrates similar …
Created on: Monday 22nd January 2024
Last updated: Monday 22nd January 2024
Spatial data recorded.

Record ID: WAW-E39191
Object type: JETTON
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A copper alloy medieval French jetton dating to c. 13th to 14th century AD. The jetton is a 'Shield of France ancient' type. Obverse description: Shield of France Obverse inscription: [...] BO [...] OVI MORO [...] Reverse description: Triple stranded straight cross fleuretty in four arched tressure Reverse inscription: None The jetton measures 27.2 mm in diameter, 2 mm in thickness and weighs 5.6 grams. 
Created on: Monday 22nd January 2024
Last updated: Monday 22nd January 2024
Spatial data recorded.

Record ID: WAW-92C6CE
Object type: BUCKLE
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete, copper alloy single loop buckle and plate, dating AD 1350-1450. The buckle is D-shaped with a slightly pointed outer edge and a narrowed and offset strap bar that retains a plain folded and slotted sub-rectangular buckle plate. The pin is missing, and the rivets are missing, but part of the leather bag remains between the plates. Dimensions. Length: 22.08mm. Width: 37.65mm. Thickness: 6.18mm. Weight: 5.38g.
Created on: Thursday 18th January 2024
Last updated: Thursday 18th January 2024
Spatial data recorded.

Record ID: WAW-912302
Object type: FINGER RING
Broad period: POST MEDIEVAL
Workflow stage: Awaiting validation
A gold finger ring of Post Medieval to Modern date (c. AD 1700-2000). The finger ring is made from a single strand of gold wire, regularly twisted around its entire circumference and with both ends joined by solder. There is very little wear on the ring and there are no maker's marks or hallmarks. The band has a regular width of c. 1.17mm and regular thickness of c. 1.15mm. The ring is slightly bent so that it is sub-circular to sub-oval in plan rather than being entirely circular. Dimensions. Length: 17.94mm. Width: 1.17mm. Thickness: 1.15mm. Height: 18.59mm. Weight: 0.56g. Dis…
Created on: Thursday 18th January 2024
Last updated: Friday 8th March 2024
No spatial data available.

Record ID: WAW-7F7889
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete, copper alloy mount of Post Medieval date (c. AD 1550-1700). The object has a composite design in the overall form of an arrow that consists of a lozengiform plate with a pointed, triangular moulded terminal. The moulded decoration on the triangular terminal consists of a central vertical rib with three pairs of moulded horizontal ribs branching off from it, potentially to resemble a leaf or a flame. The moulded decoration on the lozengiform plate is unclear. Around the edge of the lozengiform plate is a moulded border. Inside of the central area there is a moulded trian…
Created on: Wednesday 17th January 2024
Last updated: Friday 26th January 2024
Spatial data recorded.

Record ID: WAW-7B81CA
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete, copper alloy mount of likely Post Medieval date c. AD 1600-1700. The object is roughly lozenge shaped in plan and has a largely plano-convex cross section with a flat reverse and convex exterior surface. At the top of the object in the centre is a very worn and abraded trefoil shaped knop. Following this is an inverted triangular main body that has a transverse collar between two narrow transverse grooves, followed by a broader collar, another narrow transverse groove, and then a rounded terminal. On the reverse, there are the remnants of two mounting spikes. …
Created on: Wednesday 17th January 2024
Last updated: Friday 26th January 2024
Spatial data recorded.

Record ID: WAW-2C588E
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete, copper alloy Roman Colchester Derivative brooch, possibly of the Polden Hill type class 4 and dating c. AD 75-175. The pin, foot, catch plate, and most of the spring are missing. The head is 29.59mm wide including the semi-cylindrical wings. The wing caps are missing. The wings are decorated with two moulded ribs close to the junction between the head and the wings, with the ribs possibly being decorated with oblique incised grooves. Following this, there is a deep, wide, moulded groove, after which the wing returns to the previous height and gradual…
Created on: Saturday 13th January 2024
Last updated: Friday 19th January 2024
Spatial data recorded.

Record ID: WAW-2C371C
Object type: CROTAL
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A near complete copper alloy crotal bell of Post Medieval date (c. AD 1600-1800). The object is composed of two hemispheres divided by a raised, circumferential rib. The top hemisphere has two sub-oval sound holes at around 3 o'clock (4.63mm long, 4.73mm wide) and at around 9 o'clock (4.18mm long, 4.66mm wide). There is a transverse suspension loop that is roughly sub-rectangular in profile that has a central perforation (9.08mm high, 6.96mm wide) that is roughly rectilinear at one end and rounded at the other. The bottom hemisphere is divided at …
Created on: Saturday 13th January 2024
Last updated: Wednesday 24th January 2024
Spatial data recorded.

Record ID: WAW-17C5C6
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation
A Roman Republican silver denarius dating 102 BC (Reece Period 1). Moneyer: C. Fabius. See RRC 332/1b for a comparable example. Obverse description: Bust of Cybele facing right, wearing turreted crown and veil. Border of pellets. Obverse inscription: [E]X . A . PV. Reverse description: Victory in biga riding right, holding reins in left hand and goad in right. Letter 'A' below horses. Reverse inscription: [C .] [FABI .] [C .] [F]. Diameter: 17.49mm. Thickness: 1.57mm. Weight: 2.67g. Die axis: 9.
Created on: Friday 12th January 2024
Last updated: Friday 19th January 2024
Spatial data recorded.

Record ID: WAW-15FBA2
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete Post Medieval silver sixpence of George II (AD 1727-1760) and dating AD 1757. London mint. C.f. Spink, 2011, p 401, no 3704. Coin has been pierced at 1 o'clock on the obverse. Diameter: 21.04mm. Thickness: 0.95mm. Weight: 2.76g. Die axis: 6.
Created on: Friday 12th January 2024
Last updated: Friday 19th January 2024
Spatial data recorded.

Record ID: WAW-00BD09
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
An incomplete Post Medieval silver halfgroat of Elizabeth I (AD 1558-1603) dating AD 1584/5-1587. Third coinage. London mint. Initial mark: escallop. See North (1991) Vol.2 pg.137 no.2016. Part of the outer edge seems to have been cut from around 10 o'clock to around 12 o'clock. Diameter: 16.34mm. Thickness: 0.54mm. Weight: 0.96. Die axis: 1.
Created on: Thursday 11th January 2024
Last updated: Friday 19th January 2024
Spatial data recorded.