Record ID: NMGW-9D99C5
Object type: STYLUS
Broad period: UNKNOWN
County: Monmouthshire
Workflow stage: Awaiting validation
An incomplete probable copper alloy stylus of Roman or Medieval Date. The stylus is 86.5mm long and is bent, so the original would have been of greater length. The thickest part is c. 3mm square in section, with the top 31.5mm of the object expanding and flattening towards the broken upper end, which is 6.1mm wide and 1.3mm thick. This flattened part would be used to erase writing on a wax tablet. The lower broken end of the stylus is 2mm by 2.2mm thick, tapering from the thickest section. The stylus is broken at both ends badly corroded, with a rough, pitted dark green surface, showi…
Created on: Monday 28th June 2021
Last updated: Tuesday 29th June 2021
Spatial data recorded.

Record ID: NMGW-57D6D3
Object type: INGOT
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
A near-complete cast copper alloy ingot of possible Early Medieval date. The ingot is sub-oval in plan and section with straight sides and curved ends measuring 51.7mm in length and 12mm in width. Soft hammer marks are visible as irregularities in the thickness of the ingot. The thickest point of the ingot measures 5.8mm and tapers gradually towards the ends which measure 3.7mm and 4.1mm thick. The surface is plain and undecorated. The metal is a dark green patina with some spots of lighter green surface corrosion and weighs 20.32g. Similar objects are recorded on the PAS d…
Created on: Monday 19th July 2021
Last updated: Tuesday 7th September 2021
Spatial data recorded.

Record ID: NMGW-AABB8D
Object type: WEIGHT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
Perforated stone weight of uncertain date possibly medieval The weight is of irregular rectangular form (93.9mm long, 66.6mm wide and weighing 150.5g), of variable thickness (with a maximum thickness of 19.5mm) and is made from a coarse-grained sandstone. The top edge and one of the side edges appear to be moderately rounded and are likely to be unmodified, while the other two edges are irregular and probably trimmed to the desired shape. The perforation is circular (10.6mm diameter) and is wider at one face, but appears to have been drilled rather than pecked. One face (convex) …
Created on: Wednesday 4th August 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded.

Record ID: NMGW-D53BCB
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
A complete stone or ceramic spindle whorl, weight, or gaming piece of uncertain date, possibly Roman to Medieval. The object is circular in plan and convex in profile with a diameter of 25.9mm, height of 18mm and weighs 13.99g. The circular central perforation penetrates the object thickest part of the object (18mm) with an internal diameter of 6.7mm. The object is finely made and evenly polished with a smooth even surface. The surface is undecorated and lacks diagnostic features, so it is not possible to securely ascribe a date. A small pebble is wedged inside one side of the perfora…
Created on: Monday 18th October 2021
Last updated: Monday 18th October 2021
Spatial data recorded.

Record ID: NMGW-6F7DE1
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Wiltshire
Workflow stage: Awaiting validation
Copper alloy anthropomorphic cast head of uncertain date The solid cast head is complete but has broken around the neck (with a surviving length of 39.5mm and a weight of 112.6g). The head is crudely but skilfully moulded and was clearly cast from a clay or wax pattern, as evidenced by the soft ‘plastic’ moulding marks. The head is of an older male and is depicted without hair and the ears are evident as curved raised wedges. The raised brows are particularly prominent as is the wide and clearly defined nose. The recessed eyes are outlined with grooves and with a central ind…
Created on: Tuesday 19th January 2021
Last updated: Tuesday 19th January 2021
Spatial data recorded.

Record ID: NMGW-DDA8DB
Object type: FLAKE
Broad period: UNKNOWN
County: Powys
Workflow stage: Awaiting validation
A flint flake, likely debitage, of unknown date. No sign of retouch is visible on the edges. The flake is 21.8mm long, max width of 13.4mm, 4mm thick and weighs 1.01g.
Created on: Friday 26th March 2021
Last updated: Wednesday 19th May 2021
Spatial data recorded.

Record ID: NMGW-0F7707
Object type: VESSEL
Broad period: UNKNOWN
County: Gloucestershire
Workflow stage: Awaiting validation
Copper alloy handle, possibly of Roman date The object is incomplete, broken at the narrow end (with a surviving length of 38.0mm and a weight of 4.5g). The complete end is of oval section and is rounded with an expanded terminal (with a width of 10.0mm and a thickness of 3.6mm). The handle gradually narrows towards a decorative double-ribbed moulding, which all the way around the fitting. The damaged end thins, as if to a blade (with a thickness of 1.1mm). The surface has a dark-green patina. It is possible that the object is the handle of a medical or cosmetic implement of Rom…
Created on: Friday 17th October 2014
Last updated: Friday 17th October 2014
Spatial data recorded.

Record ID: NMGW-7BDCEE
Object type: FURNITURE FITTING
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Copper alloy decorative fitting of uncertain function and date The fitting is fragmentary, missing the apex (with a surviving length of 18.3mm and a weight of 10.6g). The circular base is complete (with a diameter of 20.6mm and a thickness of 1.1mm) and has a narrowed rim, enhanced with crimped marks, now mostly lost. Above the rim, the fitting widens (to a maximum diameter of 22.2mm) before narrowing below the break (where the fitting has a diameter of 9.8mm). The fitting is decorated near the base with repeating semicircular mouldings. The interior is as-cast. The surface has a d…
Created on: Wednesday 22nd October 2014
Last updated: Wednesday 22nd October 2014
Spatial data recorded.

Record ID: NMGW-59B71B
Object type: PIN
Broad period: UNKNOWN
County: Pembrokeshire
Workflow stage: Awaiting validation
Copper alloy pin of uncertain date, with possible zoomorphic terminal The cast pin is near-complete but is heavily-corroded (with an overall length of 43.5mm and a weight of 3.4g). The terminal is asymmetric and of undulating form, possibly representing stylised opposing birds (with a width of 19.6mm and a thickness of 3.7mm). There is a slight protrusion at the centre of the apex and may be a damaged stub. Beneath the protrusion is a circular perforation through the pin head (of 2.8mm diameter) and retaining the remnants of a fixing, possibly the link from a chain. The head narrows…
Created on: Thursday 15th February 2018
Last updated: Wednesday 31st March 2021
No spatial data available.

• 

  Image not taken

Record ID: NMGW-24E996
Object type: DEBITAGE
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation
Brown flint knapping debitage
Created on: Thursday 10th December 2020
Last updated: Monday 21st December 2020
Spatial data recorded. This findspot is known as 'South Gower Field RS 310', grid reference and parish protected.

• 

  Image not taken

Record ID: NMGW-25237E
Object type: FLAKE
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation
Cortical flake with edge damage and possible retouch. Brown flint.
Created on: Thursday 10th December 2020
Last updated: Monday 21st December 2020
Spatial data recorded. This findspot is known as 'South Gower Field RS 310', grid reference and parish protected.

• 

  Image not taken

Record ID: NMGW-253A2F
Object type: FLAKE
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation
Black flint flake.
Created on: Thursday 10th December 2020
Last updated: Monday 21st December 2020
Spatial data recorded. This findspot is known as 'South Gower Field RS 310', grid reference and parish protected.

• 

  Image not taken

Record ID: NMGW-255C34
Object type: FLAKE
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation
Creamy white flint flake.
Created on: Thursday 10th December 2020
Last updated: Monday 21st December 2020
Spatial data recorded. This findspot is known as 'South Gower Field RS 310', grid reference and parish protected.

• 

  Image not taken

Record ID: NMGW-25665B
Object type: DEBITAGE
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation
Piece of cortical knapping debitage in brown flint.
Created on: Thursday 10th December 2020
Last updated: Wednesday 14th April 2021
Spatial data recorded. This findspot is known as 'South Gower Field RS 310', grid reference and parish protected.

• 

  Image not taken

Record ID: NMGW-8CFC07
Object type: FLAKE
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation
A possible flint flake of prehistoric date.
Created on: Tuesday 15th December 2020
Last updated: Monday 21st December 2020
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-8D1712
Object type: DEBITAGE
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation
Two flint debitage pieces of prehistoric date.
Created on: Tuesday 15th December 2020
Last updated: Monday 21st December 2020
Spatial data recorded.

Record ID: NMGW-3263D2
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Wiltshire
Workflow stage: Awaiting validation
The strip is broken at one end but appears to be complete on the other (with a surviving length of 108.2mm and a weight of 2.6g). The complete end has a straight terminal (6.0mm wide and 0.3mm thick) and the sides are straight and near-parallel for their surviving length. The strip is decorated on one face with a central row of hand-punched dots and the terminal has a border of punched dots. The decoration is interrupted near the centre (55mm from the terminal and 43mm from the broken end) where there is an undecorated but has three ridges across its width. The surface is worn with as…
Created on: Monday 4th January 2021
Last updated: Monday 4th January 2021
Spatial data recorded.

Record ID: NMGW-346C2E
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Pembrokeshire
Workflow stage: Awaiting validation
Copper alloy socketed and looped fitting of uncertain date The cast fitting appears to be near-complete but corroded and worn (with a length of 32.8mm and a weight of 15.4g) and is comparatively crude casting. The socket interior is of trilobed form (13mm both wide and long and 13mm – 17mm deep), open at both ends and with a break at the rear. There are decorative mouldings on the outside of the socket, comprising opposing arcs on the concave edges, with one face deeper than the other. There is an integral loop (12mm long, 4.5mm -6.8mm thick with an internal diameter of 7.6mm) …
Created on: Monday 4th January 2021
Last updated: Wednesday 6th July 2022
Spatial data recorded.

Record ID: NMGW-DC97D8
Object type: AWL
Broad period: UNKNOWN
County: Wiltshire
Workflow stage: Awaiting validation
Copper alloy tanged awl of uncertain date The cast awl is incomplete, probably only slightly truncated (with a length of 46.5mm and a weight of 7.9g). Damage at both ends now makes it difficult to determine the point from the tang. The awl is of sub-square section at both ends and gradually widens to its midsection (with dimensions 6.1mm square). At one end the corners appear to be faceted and probably contemporary with its use, suggesting that this end may have been the blade. Damage to the end makes it difficult to determine whether the tip was a pointed or edged. There is no d…
Created on: Tuesday 12th January 2021
Last updated: Tuesday 12th January 2021
Spatial data recorded.

Record ID: NMGW-566C55
Object type: MOUNT
Broad period: UNKNOWN
County: Gloucestershire
Workflow stage: Awaiting validation
Cast copper alloy fitting or mount of uncertain date The fitting has a finger-ring like form but has a thickened area projecting to the side, now damaged and fragmentary, suggesting a different function. The object is fragmentary, comprising one fragmentary side and a decorative top (with a surviving height of 6mm and a weight of 7.5g). The fragmentary side projected to one end (with a surviving maximum width of 11.7mm) and would have continued further and possibly also on the opposite end. The side then narrow with parallel edges (8.7mm wide and 4mm thick). The sides may have b…
Created on: Monday 18th January 2021
Last updated: Monday 18th January 2021
Spatial data recorded.