Back to simple search | Back to advanced search

    You searched for:

    • Institution:NMGW
    • Show this many records per page:40
    • Sort:created

  • Thumbnail image of NMGW-C5C30F

Record ID: NMGW-C5C30F
Object type: HOARD
Broad period: BRONZE AGE
County: Bridgend
Workflow stage: Published Find published
Two socketed axes (Cat. Nos. 1-2, below) were found together in the same metal-detector pit at approximate depths of 0.15-0.23m (6-9 inches) below the ground surface. A further socketed axe and a casting jet (Cat. Nos. 3 & 7, below) were also later recovered from the same metal detector pit, at approximate depths of 0.25-0.30m (10-12 inches). A socketed axe blade fragment (Cat. No. 4, below) was discovered approximately 17m to the east of the detector pit, whilst a palstave fragment (Cat. No. 5, below) was discovered approximately 2m to the north-north-east of the detector pit. &nb…
Created on: Thursday 21st March 2024
Last updated: Thursday 21st March 2024
Spatial data recorded. This findspot is known as 'Coychurch Higher Community', grid reference and parish protected.


  • Thumbnail image of NMGW-F21711

Record ID: NMGW-F21711
Object type: FINGER RING
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
A complete forged copper alloy spiral finger ring of probable Iron Age to Roman date (c. 200BC-AD 410). The ring is of Guiraud Type 7 (Guiraud 1989, 195-6). The ring is made from a forged bar of copper alloy 4.3- 4.8mm diameter wrapped around to form a ring, completing two full turns. The section of the bar is circular. The internal diameter of the ring is variable with a maximum of 22.1mm. The inner surface has a central seam stretching its length and visible in the terminal sections as a result of the forging process. The ring has a glossy smooth olive green to dark brown patina on…
Created on: Monday 11th March 2024
Last updated: Monday 11th March 2024
Spatial data recorded.


  • Thumbnail image of NMGW-F0F0A6

Record ID: NMGW-F0F0A6
Object type: COIN
Broad period: ROMAN
County: Cardiff
Workflow stage: Published Find published
A copper alloy Roman nummus of Arcadius (AD 383-408) or Honorius (AD 393-423), dating to the period AD 406-408 (Reece Period 22). GLORIA ROMANORVM reverse type depicting three emperors standing facing, each holding a spear, the two outermost resting a hand on shield. Uncertain eastern mint. RIC X, p.251-2, nos 141a ff.
Created on: Monday 11th March 2024
Last updated: Monday 11th March 2024
Spatial data recorded.


  • Thumbnail image of NMGW-F0A319

Record ID: NMGW-F0A319
Object type: COIN
Broad period: ROMAN
County: Cardiff
Workflow stage: Published Find published
A copper alloy Roman nummus of Honorius (AD 393-423), dating to the period AD 395-401 (Reece Period 21). VIRTVS EXERCITI reverse type depicting Emperor standing left, head right, holding spear and resting left hand on shield. Victory, holding palm-branch in left hand, crowns him. Mint of Cyzicus. RIC X Arcadius 68; LRBC 2-2581.
Created on: Monday 11th March 2024
Last updated: Monday 11th March 2024
Spatial data recorded.


  • Thumbnail image of NMGW-5B6156

Record ID: NMGW-5B6156
Object type: BLADE
Broad period: NEOLITHIC
County: Pembrokeshire
Workflow stage: Awaiting validation Find awaiting validation
Core rejuvenation blade, most likely to be of Neolithic date (c. 4000-2500BC). Made of flint. Length = 79.0mm; width = 28.0mm; thickness – 15.0mm; weight = 25.3g. The blade is struck from a blade core with the intention to refresh the striking platform of the core to enable further blades to be removed from it. Blades from such a core could have been retouched and made into scrapers, knives, or other tools.
Created on: Monday 4th March 2024
Last updated: Monday 4th March 2024
Spatial data recorded.


  • Thumbnail image of NMGW-CA2048

Record ID: NMGW-CA2048
Object type: COIN
Broad period: IRON AGE
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An Iron Age gold Continental Gallo-Belgic quarter stater (1.64g ; 9.7mm), dating to c.125 - 50 BC (Sills Class Ca2). Obverse: Animal or boat. Reverse: Waved line or tree-like object. Sills 2003: 232 and Fig 76.
Created on: Monday 26th February 2024
Last updated: Monday 4th March 2024
Spatial data recorded.


  • Thumbnail image of NMGW-7222BE

Record ID: NMGW-7222BE
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Isle of Anglesey
Workflow stage: Published Find published
Description & identification The reported object is a decorative gold posy ring. The ring consists of a thin gold band, D-shaped in section, with a tightly set repeating pattern of tooled S-shaped indentations on the external surface, possibly for enamel, although none appears to have survived. The internal surface in engraved with an inscription which reads ‘Though absent yet constant’ in italic letters in sentence case. The ring profile is slightly misshapen.  Measurements  External diameter: 19.5 x 18.7 mm Internal diameter: 17.5 x 16.5 mm Depth: 2.4 mm Ba…
Created on: Thursday 22nd February 2024
Last updated: Thursday 22nd February 2024
Spatial data recorded. This findspot is known as 'Llanddyfnan Community', grid reference and parish protected.


  • Thumbnail image of NMGW-605466

Record ID: NMGW-605466
Object type: BROOCH
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published Find published
Description & identification The reported object is a small silver annular brooch with integral pin (frame misshapen. The frame is decorated with continuous transverse incised bands or ridges on the front surface, some of which are inlaid with a darker material, possibly niello. On the reverse frame are four groups of evenly spaced bands. The dagger-like pin is attached by a wraparound head, decorated with three irregularly spaced parallel grooves. A stirrup at the junction of the pin shaft and head has two corresponding arms, each tapering to a point at the tip. The stirrup is cur…
Created on: Wednesday 21st February 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Penllyn Community', grid reference and parish protected.


  • Thumbnail image of NMGW-5FA7C6

Record ID: NMGW-5FA7C6
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: Ceredigion
Workflow stage: Published Find published
Author: Dr Sian Iles  Description & identification Small silver seal matrix with an oval face. It is engraved with a motif of crested and plumed bird, walking right and in side profile. it’s the bird’s beak is open, holding a leafed branch which extends over its head and back. The motif is set within a single cabled oval border. The face is slightly misshapen with some damage to the right side.  The hexagonal handle tapers upwards to a large circular suspension loop with a transverse perforation, above a transverse collar. It is surmounted by a decorative sph…
Created on: Wednesday 21st February 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Nantcwnlle Community', grid reference and parish protected.


  • Thumbnail image of NMGW-5F2A77

Record ID: NMGW-5F2A77
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: Pembrokeshire
Workflow stage: Published Find published
Author: Dr Sian Iles Description & identification The object is a small complete silver seal matrix. It has an oval face and an octagonal facetted openwork handle. The octagonal handle tapers to a banded collar, above an openwork trilobed handle with flourishes. There is a small chip on the top left edge of the face.  The face is engraved with a heater shield containing a coat of arms, within a single beaded border. The design of the arms consists of the upper section or ‘chief’ which is indented and decorated with three (3) five-point stars (mullets), in negative…
Created on: Wednesday 21st February 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Llawhaden Community', grid reference and parish protected.


  • Thumbnail image of NMGW-3324A4

Record ID: NMGW-3324A4
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation Find awaiting validation
Description: small copper-alloy penannular brooch with cast hoop of circular cross-section and tinned spatulate terminals. The pin-head is barrel moulded, of a type found on fifth- and sixth-century penannular brooches such as the example from Porth Dafarch, Anglesey. The hoop is decorated with four groups of fine ribbing (two at the junction with the terminals). The terminals are covered with fine silver plate and decorated with punched ring and dot, the pairs at the terminal ends being smaller that the single ring-and-dot motifs and the narrow junction with the hoop. Thin incised lin…
Created on: Monday 19th February 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.


  • Thumbnail image of NMGW-C15998

Record ID: NMGW-C15998
Object type: BROOCH
Broad period: ROMAN
County: Carmarthenshire
Workflow stage: Awaiting validation Find awaiting validation
A near-complete Roman cast copper alloy brooch, of Colchester derivative Polden Hill type, dating from c. AD 80 -120. The object consists of the head and the bow of the brooch, with the axis bar and spring still intact. The pin and most of the catch plate are missing. It is irregular in plan, broadly comma shaped in profile, and irregular in cross section. The bow of the brooch is 13.61mm wide and 18.75mm deep at the head, narrowing to 3.26mm wide and 7.96mm deep at the foot. On either side of the brooch head are two curved raised areas edged with a single row of small diag…
Created on: Wednesday 14th February 2024
Last updated: Tuesday 27th February 2024
Spatial data recorded.


  • Thumbnail image of NMGW-264ABB

Record ID: NMGW-264ABB
Object type: PIN
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy pinhead of probable Roman date (c.AD 43-410). The pin is comprised of the head and a fragment of the shaft (overall height 13.0mm). The head is globular, flat on the bottom, with four intersecting incised grooves forming a flower or star decoration (external diameter 6.7mm, height 3.2mm). The shank is circular in section (diameter 3.0mm, 9.2mm long) and terminates in a transverse break.  The object has a dark green patina and weighs 1.24g. A direct parallel could not be found, but broadly similar pins were recovered from excavations at Colchester…
Created on: Tuesday 6th February 2024
Last updated: Thursday 15th February 2024
Spatial data recorded.


  • Thumbnail image of NMGW-182ED5

Record ID: NMGW-182ED5
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver groat of Edward III (AD 1327-1377) minted in London, dating to 1354-1355. Fourth coinage, pre-treaty series E (North 1163) Obverse: Crowned bust facing within a tressure of nine arches. Trefoils on each arch cusp, barring top and bottom arches. Obverse legend: ✠EDWARD◦D G◦REX◦ANGL◦◦ [F]RANC◦ D h[YB] Reverse description: Long cross pattee dividing the legend held within two concentric circles, three pellets in each quadrant. Reverse legend (outer) +POSVI DEVM◦A DIVTOR EMMEV (inner): CIV TAS LON DON  The coin appears to have had some clipping…
Created on: Tuesday 6th February 2024
Last updated: Wednesday 14th February 2024
Spatial data recorded. This findspot is known as 'North Gower', grid reference and parish protected.


  • Thumbnail image of NMGW-113038

Record ID: NMGW-113038
Object type: COIN
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval silver cut long-cross halfpenny of Henry III (1216-1272), Class 1b/2 mule, moneyer Nicole, struck in London in 1248 (North 984-5).
Created on: Monday 5th February 2024
Last updated: Friday 1st March 2024
Spatial data recorded.


  • Thumbnail image of NMGW-0F16BD

Record ID: NMGW-0F16BD
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
A near complete cast copper alloy and enamel Medieval harness pendant dating from 1200 to 1400 AD. The harness pendant is shield-shaped with an integrally cast loop; the front is decorated in relief blue enamel depicting a unicorn rampant.  The suspension loop is 8.5mm long with a loop hole (2.6mm in diameter) which is set 90 degrees from the shield. The suspension loop is positioned at the top center of the shield. The shield has a flat top, and sides which curve steeply to a point, it measures 25.08mm wide across its top and 29.65mm in length. The shield varies in thickness, me…
Created on: Monday 5th February 2024
Last updated: Friday 1st March 2024
Spatial data recorded. This findspot is known as 'Gower', grid reference and parish protected.


  • Thumbnail image of NMGW-D97664

Record ID: NMGW-D97664
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Powys
Workflow stage: Awaiting validation Find awaiting validation
A complete Post Medieval copper alloy posy ring dating from c. 1600 to 1700 AD. The hoop is broadly circular in plan (it is slightly bent out of shape) and is shallow D-shaped in cross-section. There is a central vertical seam which stands proud of the rings surface. The inner face of the hoop is inscribed with the text: I LIVE IN LOVE, in Roman uppercase lettering. The terminal of the letter I splits into two curving serifs. There is no maker’s mark. The ring has corrosion to its surface rendering it a dark reddish brown colour. There are no visible remains of silvering or gilding.
Created on: Saturday 3rd February 2024
Last updated: Sunday 4th February 2024
Spatial data recorded.


  • Thumbnail image of NMGW-D28B2C

Record ID: NMGW-D28B2C
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
A hammered gold sheet of uncertain date. The sheet has a maximum length of 51.4mm, width of 39.3mm, 0.7mm thick and weighs 14.76g. The sheet is lacking any diagnostic features so the use and date cannot be determined. Small percussion marks on the surface indicate the sheet was intentionally flattened before being deposited, discarded, or lost. Due to the uncertainty of the date, the object is not considered Treasure under the Treasure Act 1996.
Created on: Friday 2nd February 2024
Last updated: Friday 2nd February 2024
Spatial data recorded.


  • Thumbnail image of NMGW-D197A5

Record ID: NMGW-D197A5
Object type: COIN
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
A struck silver cut halfpenny of Henry II (r. AD1154-1189) or possibly Richard I (r. AD 1189-1199), dating c. AD 1180-1190. Rhuddlan mint, Halli moneyer as North Group I Class i, No. 972/1, aka Ruddlan Class 1a.
Created on: Friday 2nd February 2024
Last updated: Friday 2nd February 2024
Spatial data recorded.


  • Thumbnail image of NMGW-D1887A

Record ID: NMGW-D1887A
Object type: COIN
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
An incomplete struck silver denarius of Hadrian (r. AD 117-138) dating AD 118-120. Uncertain type, either as RIC II, Part 3 (second edition) Hadrian 138 or 198. Mint of Rome. 
Created on: Friday 2nd February 2024
Last updated: Friday 2nd February 2024
Spatial data recorded.


  • Thumbnail image of NMGW-A48043

Record ID: NMGW-A48043
Object type: BROOCH
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
A near-complete, distorted copper alloy Colchester Derivative Polden Hill (CD PH) type brooch of Roman date (c. 75-175AD). The brooch belongs to Mackreth’s CD PH Type 5.b3. The brooch is intact except for the pin and parts of the catchplate. The wings are rectangular in plan with plain concave front faces, with a hollow reverse and perforated sub-rectangular to sub-triangular wing caps. The copper alloy bilateral spring is fixed in place by the copper alloy axis bar held at either end by the lugs. The external chord of the spring is fixed through an integral perforated lug proje…
Created on: Wednesday 31st January 2024
Last updated: Thursday 15th February 2024
Spatial data recorded.


  • Thumbnail image of NMGW-A47819

Record ID: NMGW-A47819
Object type: NEEDLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
An incomplete distorted copper alloy needle of uncertain date, likely Medieval to Post Medieval. The needle is missing the upper half of its head, which is broken across the eye. The needle shank has an oval section tapering to flattened oval towards the head, which has a flat section 1.5mm thick. The needle is broken across the 4.5mm wide lozengiform eye, which has a surviving internal diameter of 1.9mm and appears to have been punched. The needle is distorted into a c. 90-degree curve from the head to about half its length, with a second perpendicular bend at c. one-third of the nee…
Created on: Wednesday 31st January 2024
Last updated: Thursday 15th February 2024
Spatial data recorded.


  • Thumbnail image of NMGW-A46D83

Record ID: NMGW-A46D83
Object type: RING
Broad period: IRON AGE
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy ring, likely a sword belt ring of probable late iron Age to Roman Date (1st century BC to 1st century AD). The ring is a circular hoop 32.2mm in diameter with a near-circular section measuring 5.4mm thick and 4.4mm wide. The internal diameter of the ring is 23-23.4mm. The ring is decorated on its circumference by continuous 2.4mm wide band of incised rectangular beading. The remainder of the ring’s surviving surface is highly polished and patinated green to light green. The surface is broken and pitted in some patches, with bright green corrosion product …
Created on: Wednesday 31st January 2024
Last updated: Thursday 15th February 2024
Spatial data recorded.


  • Thumbnail image of NMGW-83CC4B

Record ID: NMGW-83CC4B
Object type: BLADE
Broad period: BRONZE AGE
County: Bridgend
Workflow stage: Awaiting validation Find awaiting validation
A fragment of Late Bronze Age cast copper alloy blade, possibly of Ewart Park type, dating from c. 1000 to 800 BC. The blade fragment has a surviving length of 64.39mm, with a surviving width of 33.23mm across the top break, and 26.18mm across the lower break. It is broadly trapezoid in plan and is lenticular in cross-section. On one blade face there is evidence of a midrib approximately 12.0mm wide. The blade edges are heavily eroded leaving no original surface. The break surface at the wider end of the fragment is worn with green corrosion, suggestive of the blade being possibly b…
Created on: Tuesday 30th January 2024
Last updated: Tuesday 30th January 2024
Spatial data recorded.


  • Thumbnail image of NMGW-1391B7

Record ID: NMGW-1391B7
Object type: COIN HOARD
Broad period: ROMAN
County: Conwy
Workflow stage: Published Find published
Circumstances of discovery and reporting A hoard of 37 Roman silver coins was discovered by David Henry Moss and Tom Taylor on 20th-21st December 2018 and 19th January 2019 in Caerhun Community, Conwy. The coins were found while metal detecting on cultivated land that was under pasture at the time. The findspot (a National Grid Reference) of the coins and addresses of interested parties are given on the Treasure Receipt Form. The coins were discovered scattered in shallow rocky ploughsoil at depths of approximately 3-4 inches. Mr Moss and Mr Taylor discovered another coin hoard of Ro…
Created on: Wednesday 24th January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Caerhun Community', grid reference and parish protected.


  • Thumbnail image of NMGW-0EA045

Record ID: NMGW-0EA045
Object type: COIN HOARD
Broad period: ROMAN
County: Conwy
Workflow stage: Published Find published
Circumstances of discovery and reporting A ceramic pot containing 2733 Roman silver and copper alloy coins was discovered by David Henry Moss and Tom Taylor on 22nd December 2018 in Caerhun Community, Conwy.  The hoard was found while metal detecting on cultivated land that was under pasture at the time. The top of the pot was discovered at a depth of about 30cm below the surface of the field, at the top of a slight mound. The finders carefully excavated the pot themselves, wrapped the pot in bandages and left the coins inside the pot. The rim of the pot had been struck by a ploug…
Created on: Wednesday 24th January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Caerhun Community', grid reference and parish protected.


  • Thumbnail image of NMGW-FF674E

Record ID: NMGW-FF674E
Object type: HOARD
Broad period: BRONZE AGE
County: the Vale of Glamorgan
Workflow stage: Published Find published
Introduction (AG & CG) A Late Bronze Age hoard of seven bronze artefacts (eleven fragments), was discovered by Mr Mark Herman on 8th September 2019 while metal-detecting on a field under arable in Pendoylan Community, Vale of Glamorgan. Ten of the fragments (Nos. 2-11) were found together in a single localized cluster, located a maximum distance of 1.2m (4 feet) from each other. A single socketed axe (No. 1, below) was found approximately c. 2.1-2.5 m (7-8 feet) away from the main group of artefacts and within the same area of the same field. Most artefacts (Nos. 2-11) were rep…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Pendoylan Community', grid reference and parish protected.


  • Thumbnail image of NMGW-FF1B4E

Record ID: NMGW-FF1B4E
Object type: HOARD
Broad period: BRONZE AGE
County: Cardiff
Workflow stage: Published Find published
Introduction A Late Bronze Age hoard of 39 fragments representing a minimum of 38 artefacts was discovered by Dr Peter Anning on 2nd February 2021 while metal-detecting on a field following agricultural drainage work. All of the artefacts were reported as being discovered within an area of 2.4m (8 feet) of each other, of each other and at approximate depths of 20-30cm (8-12 inches). Full details of the findspot (NGR) and the addresses of the finders and the landowner are provided on the Treasure Receipt form for this case. The discovery was first reported to Mark Lodwick, Co-ordi…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'St Fagans Community', grid reference and parish protected.


  • Thumbnail image of NMGW-FEEBD1

Record ID: NMGW-FEEBD1
Object type: HOARD
Broad period: BRONZE AGE
County: Monmouthshire
Workflow stage: Published Find published
1.0 Discovery & reporting A Late Bronze Age hoard comprising a bronze socketed axe fragment and a bronze sword blade fragment was discovered on 2nd April 2021 by Peter Griffiths (finder of the axe) and Luke Harris (finder of the sword blade) while metal-detecting on a field under improved pasture in Llanover Community, Monmouthshire. The two artefacts were reported as being found within 60cm (2 feet) of each other, each at depths of 25cm (10 inches). Full details of the findspot (NGR) and the addresses of the finders and the landowner are provided on the Treasure Receipt form for…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Llanover Community', grid reference and parish protected.


  • Thumbnail image of NMGW-FEA9FC

Record ID: NMGW-FEA9FC
Object type: HOARD
Broad period: BRONZE AGE
County: Cardiff
Workflow stage: Published Find published
Discovery (CG & AG) A Late Bronze Age hoard of six fragments, representing four artefacts, was discovered by Dr Peter Anning on 30th October 2020 while metal-detecting in a field under pasture in Pontprennau Community, Cardiff. These included four sword blade fragments (Nos. 1-4, below) and two casting jets (Nos. 5-6, below). The artefacts were all discovered within the same field, scattered over an area of 3.5-4.0 square metres (12 square feet) and found at variable depths of between 8-20cm (3-8 inches). A further copper alloy ‘dumbbell’ shaped artefact (No. 7, bel…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Pontprennau Community', grid reference and parish protected.


  • Thumbnail image of NMGW-FDE8FE

Record ID: NMGW-FDE8FE
Object type: HOARD
Broad period: BRONZE AGE
County: the Vale of Glamorgan
Workflow stage: Published Find published
1.0 Discovery & reporting (AG) A Late Bronze Age hoard comprising three bronze socketed axe fragments and a bronze sword blade fragment were discovered on 27th and 28th March 2021 by David Nicklin while metal-detecting in a field under pasture in Llanmaes Community, Vale of Glamorgan. The four artefact fragments were found within the same area of the single field at depths of 20-25cm (8-10 inches) and had been scattered a maximum distance of 38.7 metres from each other. A socketed axe blade fragment (No.2, below) was found 11.3m to the south-west of the sword blade fragment (No. 1…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Llanmaes Community', grid reference and parish protected.


  • Thumbnail image of NMGW-814DAB

Record ID: NMGW-814DAB
Object type: BRACELET
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
A complete, slightly distorted copper alloy child’s bracelet of probable broad Roman date (c. 43-410AD). The bracelet comprises a single rectangular strip of 4.5mm wide, 2mm thick D-sectioned copper alloy bent into a flattened penannular hoop. The bracelet is twisted in the middle, pushing the terminals of the hoop out of alignment, but otherwise appears to be in its original configuration, with a height of c. 22.5mm, and an external diameter of 34.8mm and an internal diameter of c. 30mm. The bracelet is estimated to have length of c. 70mm if flattened into a straight line. The…
Created on: Wednesday 17th January 2024
Last updated: Thursday 15th February 2024
No spatial data available.


  • Thumbnail image of NMGW-6A69D1

Record ID: NMGW-6A69D1
Object type: COIN
Broad period: ROMAN
County: Powys
Workflow stage: Awaiting validation Find awaiting validation
A Roman silver denarius of Augustus (27 BC-AD 14) dating to 13 BC (Reece Period 1). Overse: AVGVSTVS, Head of Augustus bare, right; behind, lituus. Reverse: C MARIVS CF TRO IIIVIR, quadriga right carrying palm. Mint of Rome. RIC (second edition) Augustus 399.
Created on: Tuesday 16th January 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.


  • Thumbnail image of NMGW-68D7B6

Record ID: NMGW-68D7B6
Object type: HAMMER
Broad period: BRONZE AGE
County: West Berkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy socketed hammer head of middle to late Bronze Age date (c.1500-700 BC). The hammer is long and narrow, sub-rectangular/sub-trapezoidal in plan and section (total length 85.2mm). One end contains a socket with a sub-rectangular, almost circular and slightly expanded mouth (external dimensions 14.6mm tall x 14.3mm wide*, internal dimensions of mouth 11.1mm tall x 12mm wide x appx.12.1mm deep) with a narrow moulded collar (8.5mm long). The sides of the hammer are straight and taper very gently from the collar (dimensions just after collar: 10.3mm wide x 10.5mm…
Created on: Tuesday 16th January 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.


  • Thumbnail image of NMGW-5611B4

Record ID: NMGW-5611B4
Object type: HARNESS FITTING
Broad period: IRON AGE
County: Powys
Workflow stage: Awaiting validation Find awaiting validation
A complete enamelled copper alloy harness fitting (toggle or cheek-piece) of late Iron Age to early Roman date, broadly 1st century AD, but probably more specifically to around the Roman campaigning period in Wales (47-78AD), broadly c. 60-80AD (Davis and Gwilt 2008, pg.164). The toggle is complete with the exception of minor damage to its terminals and enamel inlays. The toggle has a length of 117.2mm comprising a central perforated section tapering at each end into two circular sectioned arms, which in turn expand to the circular sectioned flat-ended terminals. The central section i…
Created on: Monday 15th January 2024
Last updated: Monday 22nd January 2024
Spatial data recorded.


  • Thumbnail image of NMGW-53C09F

Record ID: NMGW-53C09F
Object type: COIN
Broad period: IRON AGE
County: West Berkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete Iron Age gold stater of the Atrebates/southern region, struck under Tincomarus (25 BC-AD 10) dating to the period c.20 BC-AD 10, Rudd’s ‘Tincomarus Warrior Com F’ type. Possibly mis-struck as the reverse has a smeared appearance and the pellet border appears slipped. The coin has a rose gold appearance. Reference: ABC 1067
Created on: Monday 15th January 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.


  • Thumbnail image of NMGW-536260

Record ID: NMGW-536260
Object type: MOUNT
Broad period: MODERN
County: Surrey
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy mount of modern date, likely 18th-19th century. The mount is fishtail in plan and the surface is decorated with concentric recessed cells likely to accommodate rhinestones. The reverse is flat with a possible makers mark in the centre and a folded tab at the flared end with a narrow neck, probably for attachment to something. The metal has a rough light green patina and traces of gold gilding preserve on both surfaces. Length 28.5mm x width 15.7mm x thickness 2.2mm (5.0mm at the tab), weight 2.69g.
Created on: Monday 15th January 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.


  • Thumbnail image of NMGW-532F79

Record ID: NMGW-532F79
Object type: WEIGHT
Broad period: MEDIEVAL
County: Newport
Workflow stage: Awaiting validation Find awaiting validation
A near-complete cast lead weight of probable Medieval date (c.AD 1350-1500). The weight is triangular in plan and rectangular in section (68.9mm long x 53.8mm wide at the base x 18.2mm thick) with a rectangular perforation/slot that is bigger on one side, probably the reverse (7.6mm long x 3.4mm tall) and is a narrow slit on the other, probably the face. The face is decorated with a moulded border stepped down from the flat surface of the face and defined by a deep groove along the inside edge. The weight was likely decorated with a motif on the front, but post-depositional damage and …
Created on: Monday 15th January 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.


  • Thumbnail image of NMGW-EAB5C7

Record ID: NMGW-EAB5C7
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Dimensions: length 84.7mm; length of blade 39.2mm; max. surviving width of blade 14.2mm; external socket diameter 14.9mm; internal socket diameter 12.4mm; approx. length of side-loops 10-10.4mm; depth of socket 53.8mm; weight 21.62g Middle Bronze Age bronze socketed spearhead of Davis’ Group 6: Developed side-looped (2012), and probably dating to the Acton Park-Taunton metalworking assemblages (c. 1550-1250 BC). The spearhead is complete and relatively short in overall length, with a short and slender leaf shaped blade. The midrib is pronounced and lozenge shaped in cross-secti…
Created on: Wednesday 10th January 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.


  • Thumbnail image of NMGW-D6F9A4

Record ID: NMGW-D6F9A4
Object type: BROOCH
Broad period: ROMAN
County: West Berkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy plate brooch of Roman date (c. 70-250 AD). The brooch belongs to Mackreth’s British Plate 5.a (Dished Cone), as No. 11119, Pl. 108. The brooch is incomplete and distorted, missing the pin and axis bar as well as parts of the rim and inner plate. The brooch is circular in plan (26.1mm in diameter) with a thickened (1.8mm thick), upturned rim with integrally cast rounded lugs projecting at regular intervals from the base of the rim. Four of these lugs survive, there were likely originally six. The plate within the rim rises to form a central, slightly co…
Created on: Tuesday 9th January 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 6,128
Search server index: objects

You are viewing records: 1 - 40.

Search statistics

  • Total quantity: 19,242
  • Mean quantity: 3.140
  • Maximum: 3,547

Filter your search

1 - 40 of 6,128 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.