Record ID: NMGW-C5C30F
Object type: HOARD
Broad period: BRONZE AGE
County: Bridgend
Workflow stage: Published
Two socketed axes (Cat. Nos. 1-2, below) were found together in the same metal-detector pit at approximate depths of 0.15-0.23m (6-9 inches) below the ground surface. A further socketed axe and a casting jet (Cat. Nos. 3 & 7, below) were also later recovered from the same metal detector pit, at approximate depths of 0.25-0.30m (10-12 inches). A socketed axe blade fragment (Cat. No. 4, below) was discovered approximately 17m to the east of the detector pit, whilst a palstave fragment (Cat. No. 5, below) was discovered approximately 2m to the north-north-east of the detector pit. &nb…
Created on: Thursday 21st March 2024
Last updated: Thursday 21st March 2024
Spatial data recorded. This findspot is known as 'Coychurch Higher Community', grid reference and parish protected.

Record ID: NMGW-FF674E
Object type: HOARD
Broad period: BRONZE AGE
County: the Vale of Glamorgan
Workflow stage: Published
Introduction (AG & CG) A Late Bronze Age hoard of seven bronze artefacts (eleven fragments), was discovered by Mr Mark Herman on 8th September 2019 while metal-detecting on a field under arable in Pendoylan Community, Vale of Glamorgan. Ten of the fragments (Nos. 2-11) were found together in a single localized cluster, located a maximum distance of 1.2m (4 feet) from each other. A single socketed axe (No. 1, below) was found approximately c. 2.1-2.5 m (7-8 feet) away from the main group of artefacts and within the same area of the same field. Most artefacts (Nos. 2-11) were rep…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Pendoylan Community', grid reference and parish protected.

Record ID: NMGW-FF1B4E
Object type: HOARD
Broad period: BRONZE AGE
County: Cardiff
Workflow stage: Published
Introduction A Late Bronze Age hoard of 39 fragments representing a minimum of 38 artefacts was discovered by Dr Peter Anning on 2nd February 2021 while metal-detecting on a field following agricultural drainage work. All of the artefacts were reported as being discovered within an area of 2.4m (8 feet) of each other, of each other and at approximate depths of 20-30cm (8-12 inches). Full details of the findspot (NGR) and the addresses of the finders and the landowner are provided on the Treasure Receipt form for this case. The discovery was first reported to Mark Lodwick, Co-ordi…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'St Fagans Community', grid reference and parish protected.

Record ID: NMGW-FEEBD1
Object type: HOARD
Broad period: BRONZE AGE
County: Monmouthshire
Workflow stage: Published
1.0 Discovery & reporting A Late Bronze Age hoard comprising a bronze socketed axe fragment and a bronze sword blade fragment was discovered on 2nd April 2021 by Peter Griffiths (finder of the axe) and Luke Harris (finder of the sword blade) while metal-detecting on a field under improved pasture in Llanover Community, Monmouthshire. The two artefacts were reported as being found within 60cm (2 feet) of each other, each at depths of 25cm (10 inches). Full details of the findspot (NGR) and the addresses of the finders and the landowner are provided on the Treasure Receipt form for…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Llanover Community', grid reference and parish protected.

Record ID: NMGW-FEA9FC
Object type: HOARD
Broad period: BRONZE AGE
County: Cardiff
Workflow stage: Published
Discovery (CG & AG) A Late Bronze Age hoard of six fragments, representing four artefacts, was discovered by Dr Peter Anning on 30th October 2020 while metal-detecting in a field under pasture in Pontprennau Community, Cardiff. These included four sword blade fragments (Nos. 1-4, below) and two casting jets (Nos. 5-6, below). The artefacts were all discovered within the same field, scattered over an area of 3.5-4.0 square metres (12 square feet) and found at variable depths of between 8-20cm (3-8 inches). A further copper alloy ‘dumbbell’ shaped artefact (No. 7, bel…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Pontprennau Community', grid reference and parish protected.

Record ID: NMGW-FDE8FE
Object type: HOARD
Broad period: BRONZE AGE
County: the Vale of Glamorgan
Workflow stage: Published
1.0 Discovery & reporting (AG) A Late Bronze Age hoard comprising three bronze socketed axe fragments and a bronze sword blade fragment were discovered on 27th and 28th March 2021 by David Nicklin while metal-detecting in a field under pasture in Llanmaes Community, Vale of Glamorgan. The four artefact fragments were found within the same area of the single field at depths of 20-25cm (8-10 inches) and had been scattered a maximum distance of 38.7 metres from each other. A socketed axe blade fragment (No.2, below) was found 11.3m to the south-west of the sword blade fragment (No. 1…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Llanmaes Community', grid reference and parish protected.

Record ID: NMGW-095467
Object type: HOARD
Broad period: BRONZE AGE
County: Ceredigion
Workflow stage: Published
1.0 Discovery, reporting & findspot investigation (AG, CG & CE) A Late Bronze Age hoard was discovered by Craig Hearne and Kieran Slade on 13th January 2020 while metal-detecting on a field under pasture in Llangeitho Community, Ceredigion.  Initially, 17 artefacts were reported as part of this find with a further 9 artefacts found scattered within ploughsoil in the immediate vicinity during January and February 2020, which were also reported and added to this hoard find. A second hoard of 38 fragments from a minimum of 25 artefacts, with a central findspot located approx…
Created on: Wednesday 6th December 2023
Last updated: Wednesday 21st February 2024
Spatial data recorded.

Record ID: NMGW-08BBD9
Object type: HOARD
Broad period: BRONZE AGE
County: Ceredigion
Workflow stage: Published
1.0 Discovery, reporting & findspot investigation (AG, CG & CE) A Late Bronze Age hoard was discovered by Craig Hearne and Kieran Slade on 13th January 2020 while metal-detecting on a field under pasture in Llangeitho Community, Ceredigion.  Initially, 33 fragments from a minimum of 23 artefacts were reported as part of this find, with a further 11 artefact fragments found scattered at later dates between late January and early March 2020, subsequently reported and added to this hoard find. A second hoard of 25 artefacts, with a central findspot located approximately 10m …
Created on: Wednesday 6th December 2023
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Llangeitho Community', grid reference and parish protected.

Record ID: NMGW-615AC8
Object type: PENANNULAR RING
Broad period: BRONZE AGE
County: the Vale of Glamorgan
Workflow stage: Published
Gold penannular ring Dimensions: external diameter (front to back) 10.1mm, external diameter (side to side) 10.7mm, internal diameter (front to back) approx. 6.0mm; internal diameter (side to side) approx. 6.5mm, diameter of body (internal to external) approx. 2.0mm; diameter of body (upper to lower face) 2.5mm, distance between terminals 0.3-0.5mm, weight (before conservation cleaning) 0.27g. This is a complete and very small penannular ring of gold with incised linear decoration around its sides and external diameter surface. Judging from surface dents and a localised small tear …
Created on: Tuesday 28th November 2023
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'St. Nicholas and Bonvilston Community', grid reference and parish protected.

Record ID: NMGW-3A90AA
Object type: DIRK
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Published
Middle Bronze Age bronze dirk, probably of Group III weapons with a damaged butt The dirk is near-complete with some peripheral damage to the butt (with a length of 121.3mm and a weight of 31.0g). The apex and shoulders of the butt are corroded and rounded (with a width of 31.1mm and a thickness at the apex of 0.8mm). There are the remains of a rivet hole on one side (with a diameter of 5.9mm) and probably the corroded remains on another on the opposite side.  It is now unclear whether the butt has significantly eroded around the rivet holes or whether the dirk has a reworked but…
Created on: Tuesday 14th November 2023
Last updated: Wednesday 20th March 2024
Spatial data recorded.

Record ID: NMGW-69D01E
Object type: HOARD
Broad period: BRONZE AGE
County: Denbighshire
Workflow stage: Published
Description of objects (AG) 1. Faceted and socketed axe, Type Gillespie, bronze – half of mouth missing Dimensions: length 81.8mm; surviving blade width 43.9mm; body width below loop 30.9mm; external mouth dimensions (side to side) approx. 30.6mm; depth socket approx. 59.0mm; width loop 6.1-7.6mm; surviving weight (before conservation) 137.0g. This is a near complete bronze faceted axe, missing one half of its mouth on one face and side. The axe has distinct angular facets down each face side-margin, giving the entire axe eight facets in total. The axe has a deep onset colla…
Created on: Wednesday 11th October 2023
Last updated: Wednesday 11th October 2023
Spatial data recorded.

Record ID: NMGW-A4C317
Object type: SWORD
Broad period: BRONZE AGE
County: the Vale of Glamorgan
Workflow stage: Published
One of three fragments of a Late Bronze Age copper-alloy leaf-shaped sword. The morphology indicates that the sword is of Ewart Park Type, a widespread type which belongs to the Ewart Park Metalworking Assemblage (c. 1000-800 BC) (Needham 1996; Needham et al. 1997). This is the third fragment, representing the lower blade- other fragments are recorded as NMGW-A49E88 and NMGW-A4A891. The sword is incomplete, missing the terminal end of the hilt and the majority of the mid- and lower blade. There is a clear refit between the lower hilt and upper blade fragments, whilst th…
Created on: Monday 14th August 2023
Last updated: Wednesday 20th March 2024
Spatial data recorded.

Record ID: NMGW-F04D8D
Object type: FLANGED AXEHEAD
Broad period: BRONZE AGE
County: Cardiff
Workflow stage: Published
DESCRIPTION Dimensions: length 102.6mm; width of blade 57.5mm; width of body 25.7mm; max. thickness of body 11.1mm; height of flanges 14.3mm; width of butt 20.5mm; weight 194.7g A virtually complete cast copper-alloy flanged axe of Needham’s Class 5A (Type Horncastle), dating to the Arreton phase of the Early Bronze Age (c. 1725-1500 BC) (Needham 1996; Needham et al. 1997). The sides of the axe are straight and slightly divergent, curving out suddenly at the blade end to create a widely expanded blade with a crescentic cutting edge. The blade edge is slightly damaged and asymm…
Created on: Tuesday 6th June 2023
Last updated: Thursday 22nd June 2023
Spatial data recorded.

Record ID: NMGW-1F0897
Object type: AWL
Broad period: BRONZE AGE
County: Hampshire
Workflow stage: Published
A near complete cast copper alloy awl or other leatherworking tool, likely of later Bronze Age date (c. 1250-700BC), but potentially dating from any time between the Bronze Age and the Medieval period (c. 1250BC-AD 1500).  The awl is essentially complete barring some minor surface loss, particularly towards the tip. The awl is rectangular in section at its thickest section c. 27mm away from the point. From this point the awl tapers to a rounded point at one end and tapers to a flattened point at the other. The flattened point was likely the tang and would have been inserted into …
Created on: Wednesday 14th September 2022
Last updated: Thursday 15th September 2022
Spatial data recorded.

Record ID: NMGW-620797
Object type: HARNESS FITTING
Broad period: BRONZE AGE
County: Wiltshire
Workflow stage: Published
A complete cast copper alloy harness fitting of Late Bronze Age date (c. 1020 – 800 BC). The ring consists of a circular ring (internal diameter 6.5mm, external diameter 18.9mm, 6.9mm thick) with an integrally cast sub-rectangular slot (outside dimensions 10.5mm long x 5.1mm high x 3.6mm thick; internal dimensions 5.3mm long x 2.5mm high) projecting from one end, resulting in a maximum length of 22.1mm. A raised moulded central rib/seam runs along the outer circumference of the ring, giving the object a flattened hexagonal shape in plan. The object is a smooth mid to dark gr…
Created on: Wednesday 24th August 2022
Last updated: Thursday 25th August 2022
Spatial data recorded.

Record ID: NMGW-ECDADB
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: Monmouthshire
Workflow stage: Published
An incomplete cast copper alloy side-looped spearhead of Middle Bronze Age date. Probably of Davis’ (2012) Group 5 A (Wide Blade) of the Acton Park metalworking phase (1550-1400 BC). At its mouth, the socket has a diameter of 2mm and an aperture diameter of 17.4mm, as well as an aperture depth greater than 43mm (the very end of the shaft aperture is still filled by soil to an unknown depth). Both side loops are present but damaged, sited 14.4mm to 12.7mm above the socket mouth, measuring 17.2mm long by 6.4mm wide and 17.7mm long by 5.6mm wide respectively. The shape of the loop …
Created on: Monday 24th January 2022
Last updated: Wednesday 21st June 2023
Spatial data recorded.

Record ID: NMGW-F1155E
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Wiltshire
Workflow stage: Published
An incomplete cast copper alloy looped palstave of possible South Western type dating to the Taunton/Penard metalworking phase (c. 1400-1100 BC). The palstave has an incomplete length of 130.3mm and a weight of 394.5g. A transverse break at the butt end of the flanges means that the butt is missing but can be assumed to have been relatively narrow- the width at the break is 23.1mm, tapering slightly from the maximum width at the flanges of 28.1mm (not including the side loop). The sides are slightly convex as far as the high point of the stop and are then straight and slightly fa…
Created on: Thursday 7th October 2021
Last updated: Saturday 9th October 2021
Spatial data recorded.

Record ID: NMGW-460555
Object type: PENANNULAR RING
Broad period: BRONZE AGE
County: Wiltshire
Workflow stage: Published
A copper alloy penannular ring or ring core of probable Bronze Age date (c. 1300-800BC). The ring is made from a circular sectioned loop. The original surface is missing, and green and brown copper corrosion products cover the ring. The blue corrosion product is likely azurite. Objects such as this are often termed “ring money” or “hair rings” but are most likely a form of personal adornment worn on the nose or ears. Typically dated to the Ewart Park phase of the Late Bronze Age, it is suggested in NMGW-04216C that they in fact originate in the Middle bronze age and continue …
Created on: Tuesday 6th July 2021
Last updated: Thursday 30th September 2021
Spatial data recorded.

Record ID: NMGW-31C923
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: County of Herefordshire
Workflow stage: Published
Late Bronze Age bronze socketed axe fragment of indeterminate type and of Wilburton-Wallington, Ewart Park or Llyn Fawr metalworking industries dated to c. 1,150 – 600BC The fragmentary cast axe is represented by a blade fragment only (with a surviving length of 30.5mm, a maximum thickness of 12.4mm and a weight of 30.2g). At the top of the fragment is the base of the socket of sub-rectangular form (28.8mm x 5.2mm and with a maximum surviving depth of 7.6mm), broken in antiquity. The socket is wedge-shaped, converging towards its base. A small length of the sides survive (19mm)…
Created on: Monday 5th July 2021
Last updated: Thursday 30th September 2021
Spatial data recorded.

Record ID: NMGW-3128F8
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Newport
Workflow stage: Published
Late Bronze Age bronze socketed axe fragment of indeterminate type and of Wilburton-Wallington, Ewart Park or Llyn Fawr metalworking industries dated to c. 1,150 – 600BC The fragmentary cast axe is represented by a blade fragment only (with a surviving length of 29.9mm, a maximum thickness of 12.0mm and a weight of 52.3g) and is of comparatively slender form. At the top of the fragment is the base of the socket of sub-rectangular form (26.7mm x 5.5mm and with a maximum surviving depth of 2.4mm), broken in antiquity. A small length of the sides survive (24-5mm), which appear sli…
Created on: Monday 5th July 2021
Last updated: Thursday 30th September 2021
Spatial data recorded.