Record ID: NMGW-4977A4
Object type: VESSEL
Broad period: IRON AGE
County: Monmouthshire
Workflow stage: Awaiting validation
A fragment of copper alloy and enamel zoomorphic vessel mount of probable late Iron Age to early Roman date (c. 50 BC to 100 AD). The object is zoomorphic, cast in the form of the stylised head of a beast with the lower jaw cut away in order to fit onto a vessel rim. The head is 21.3mm long, 12.1mm thick and 12.3mm wide, with an 8.4mm long snout with a flared, flat tip similar to a pig or boar. The lower 6.8mm of the jaw is cut out to a dept of c. 3.2mm. The rounded head has two 2.8mm diameter circular drilled eyes and is decorated on top of the cranium by two symmetrical comma shape…
Created on: Tuesday 22nd August 2023
Last updated: Monday 4th September 2023
Spatial data recorded. This findspot is known as 'Gobion fawr community', grid reference and parish protected.

Record ID: NMGW-FB5647
Object type: VESSEL
Broad period: IRON AGE
County: Monmouthshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy vessel mount, possibly a bucket escutcheon of (probably later) Iron Age to early Roman date (c. 150 BC-AD 100). The object is incomplete, missing part of the left attachment lobe and an uncertain length of the hooked rear projection. The integrally cast object has a broadly trilobed form in plan, with two symmetrical comma-shaped perforated attachment lobes at the base (the left lobe is incomplete) and a larger upper lobe forming a suspension loop (maximum internal diameter 8.mm). The attachment lobes are thinner (c. 2.7mm thick) and set slightly at an …
Created on: Tuesday 24th January 2023
Last updated: Wednesday 27th March 2024
Spatial data recorded.

Record ID: NMGW-EE065C
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation
A fragmentary cast copper alloy fragment, possibly of Late Medieval date (c.15th-16th century AD). The fragment is a piece of a rim from a large cauldron measuring 11.6mm long x 7.9mm wide x 27.4mm-25.4mm thick. The rim has a very slightly expanded lip on the inside surface before tapering slightly to the edge and the outer surface is flat with no traces of decoration surviving. Two rivets hold a sheet of copper alloy in place (surviving length 27.1mm, max surviving width 15.6mm) likely repairing a crack on the inside surface of the cauldron. These types of rivets are common in Medieva…
Created on: Friday 30th December 2022
Last updated: Friday 30th December 2022
Spatial data recorded.

Record ID: NMGW-57680E
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation
A leg fragment from a large cast copper alloy vessel, probably a cauldron, posnet or skillet likely of 16th century date, but potentially of late Medieval to Post Medieval date (c. 1300-1700 AD).  The fragment is incomplete, with the end of the leg missing and the upper portion ending in a break where it joined the body of the vessel. The leg has a surviving length of 93.6mm, width of 60.3mm, and thickness of 28mm, and weighs 293.6g. The surviving portion of leg has a sub-rectangular section excepting the robust 12.3mm wide midrib running down the centre of the flat front face. …
Created on: Monday 18th July 2022
Last updated: Tuesday 2nd August 2022
Spatial data recorded.

Record ID: NMGW-55FF0E
Object type: VESSEL
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Two fragments of Pewter or copper alloy- one possible vessel rim. Little diagnostic but maybe a medieval or post medieval vessel. A fragment 46.4mm long, 19.8mmwide and a maximum of 1.5mm thick, weighs 5.07g. The fragment has a channel beaten in lengthways with flanking ridges. One long edge is thinner that the other- 0.9mm vs 1.3mm. Possible vessel rim, but every edge is a break, and no other diagnostic features. Form of the sheet gives little indication as to shape due to distortion. A fragment 33mm long, 19.1mm wide, maximum 2.7mm thick, weighs 6.42g. Every edge is a b…
Created on: Monday 17th January 2022
Last updated: Wednesday 6th July 2022
Spatial data recorded.

Record ID: NMGW-BC7A86
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Awaiting validation
A cast copper alloy vessel fragment of Medieval or Post Medieval date. The fragment is comprises the foot of a pot leg, likely from a cooking vessel (35.1mm long, 55.8mm wide at the bottom of foot, 41.4mm wide at the break, max depth 25.1mm). The foot is sub-trapezoidal in section with traces of a raised central ridge just before the break. Much of the original surface has been lost to old damage, removing any detail that may have decorated the potleg. The object is a mottled green patina and weighs 219.4g. The proximity of other fragmentary vessels (NMGW-BC6CB0, NMGW-BC3FC6, NM…
Created on: Monday 22nd November 2021
Last updated: Monday 20th December 2021
Spatial data recorded.

Record ID: NMGW-BC6CB0
Object type: VESSEL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
A fragmentary cast copper alloy vessel fragment of Medieval or Post Medieval date (c.1300-1700). The fragment comprises the foot of a pot leg, likely for a cooking vessel (38.8mm long, 50.8mm at the bottom of the foot, 13.9mm max thickness). The foot is sub-trapezoidal in section with a raised central ridge running the length. Traces of black coating preserve on the surface. The object is a mottled green patina with patches of orange corrosion suggesting iron was present in the deposition environment and weighs 99.22g. Similar objects are recorded on the PAS database e.g. SWYOR-…
Created on: Monday 22nd November 2021
Last updated: Monday 20th December 2021
Spatial data recorded.

Record ID: NMGW-BC3FC6
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Awaiting validation
A cast copper alloy vessel fragment of Medieval or Post Medieval date. The fragment comprises the foot of a potleg, likely for a cooking vessel (74.5mm long, 27.9mm wide at the bottom of the foot, 33.7mm wide at the break, 15.1mm max depth). The potleg is sub-trapezoidal in section, reaching its widest point at the break and tapers gradually to the foot. Much of one surface is covered in iron corrosion product suggesting iron was present in the deposition environment. The metal is a mottled green patina and weighs 152.28g. The proximity of other fragmentary vessels (NMGW-BC7A86,…
Created on: Monday 22nd November 2021
Last updated: Monday 20th December 2021
Spatial data recorded.

Record ID: NMGW-BC376B
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Awaiting validation
A fragmentary cast copper alloy vessel handle from a pot or skillet, likely of Post Medieval date. The handle is cylindrical, circular in plan and measures 98.7mm in length. The handle is thickest at the end with a max diameter of 19.1mm. The end of the handle is smooth and flat with no evidence of percussion marks. The handle tapers gradually from the end and flattens slightly before curving towards the break resulting in a thickness of 12.8mm and width of 14.8mm. The broken end retains some original surface (4.8mm from external surface to break surface) which informs on the way the …
Created on: Monday 22nd November 2021
Last updated: Monday 20th December 2021
Spatial data recorded.

Record ID: NMGW-BC25BA
Object type: VESSEL
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
A fragmentary cast copper alloy vessel handle from a pot or skillet, likely of Post Medieval date. The handle is cylindrical, circular in plan and measures 98.7mm in length. The handle is thickest at the end with a max diameter of 19.1mm. The end of the handle is smooth and flat with no evidence of percussion marks. The handle tapers gradually from the end and flattens slightly before curving towards the break resulting in a thickness of 12.8mm and width of 14.8mm. The broken end retains some original surface (4.8mm from external surface to break surface) which informs on the way the …
Created on: Monday 22nd November 2021
Last updated: Monday 29th November 2021
Spatial data recorded.

Record ID: NMGW-94EE4E
Object type: VESSEL
Broad period: ROMAN
County: Monmouthshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy vessel handle of probable Late Iron Age or Roman date (1st century BC-1st century AD). The head is flat and sub-oval (14.3mm x 15.3mm, 2.5mm thick) with a sub-oval perforation (7mm x 5.8mm). The shaft is 7.0mm wide and 2.5mm thick at the bottom of the head and gradually extends to the break where it reaches a width of 11.9mm and 3.7mm thick. The shaft is bent 15.7mm down from the head giving the object an overall distorted length of 62.5mm. Some filing marks are visible on the reverse. The object is a medium green patina with patches of bright green bron…
Created on: Monday 8th November 2021
Last updated: Monday 9th January 2023
Spatial data recorded.

Record ID: NMGW-FD08F4
Object type: VESSEL
Broad period: ROMAN
County: Powys
Workflow stage: Published
An incomplete cast copper alloy vessel foot of Roman date. The object is crudely pelta shaped, with a central triangular projection and flanking lobes on one edge, the other being convex. The object is covered by soil, with areas of corrosion disrupting the dark green patinated surface. One end of the object is broken, leading to a reduced length. Pelta shaped vessel feet are well documented, with many examples recorded on the PAS database (e.g. PUBLIC-749A73 and ESS-8C8A14), and excavated from Roman contexts such as in Caerleon (Brewer, 1986, pg. 173). They are believed to have…
Created on: Thursday 27th May 2021
Last updated: Thursday 30th September 2021
Spatial data recorded.

Record ID: NMGW-45B08A
Object type: VESSEL
Broad period: MEDIEVAL
County: Powys
Workflow stage: Awaiting validation
An incomplete Medieval or Post Medieval vessel fragment consisting of part of the leg and foot, probably from a cauldron or skillet (c.AD 1200-1700). The leg is rectangular in plan and trapezoidal in section with the front surface of the leg wider and narrowing at the back. The leg is concave starting at a break from old damage (36.1mm x 11.7mm) and curving outwards, widening slightly at the foot (44.1mm x 24.1mm). A longitudinal raised central midrib 5.5mm wide decorates the front and runs down the leg 36mm from the break flanked by a shallow concave surface. The back is plain and un…
Created on: Wednesday 31st March 2021
Last updated: Wednesday 19th May 2021
Spatial data recorded.

Record ID: NMGW-3DBB53
Object type: VESSEL
Broad period: UNKNOWN
County: Monmouthshire
Workflow stage: Awaiting validation
Copper alloy vessel rim and handle fragment of uncertain date, possibly medieval The cast vessel is fragmentary, represented by a rim fragment (40.5mm long) and the upper part of the handle (40.5mm deep and weighing 49.2g), soldered together. The vessel rim has little curvature across its width, suggesting a vessel of sizeable diameter. The outside of the vessel is straight along its length (23.1mm surviving length) and has no decoration. The interior of the rim is rounded (with a vessel thickness of 4.7mm). The vessel handle is positioned level with the top of the rim and is per…
Created on: Monday 22nd February 2021
Last updated: Monday 22nd February 2021
Spatial data recorded.

Record ID: NMGW-3DADB6
Object type: VESSEL
Broad period: ROMAN
County: Monmouthshire
Workflow stage: Awaiting validation
Copper alloy vessel handle, possibly from a jug of Roman date The handle is complete (with a length of 68.3mm, a depth of 19mm and a weight of 35.7g) but no part of the container vessel survives. The handle is of S-shaped form and has flattened attachment points on each end. The upper, oval attachment point (14.5mm long x 9.4m m wide) has an outward angle, whereas the lower, sub-triangular attachment point (12.5mm long x 12.5m m wide) is near-vertical. The handle is of oval section, widening to its furthest point (where it has a width and thickness of 12.5mm and 9.9mm respective…
Created on: Monday 22nd February 2021
Last updated: Monday 22nd February 2021
Spatial data recorded.

Record ID: NMGW-68BFB7
Object type: VESSEL
Broad period: IRON AGE
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Iron Age copper alloy zoomorphic vessel mount or cup handle of 1st or 2nd century AD date The mount depicts a bird, probably a goose and is incomplete, broken at one end (with a surviving length of 28.5mm, a surviving depth of 23.0mm and a weight of 17.5g). The terminal of the mount is in the form of a bird’s head, with a protruding pointed beak of subtriangular section (3.6mm long). The start of the beak was defined by grooves, now corroded. The head of the goose is globular (with a maximum diameter of 11.5mm) and the eyes are inset with bright blue glass spherical beads (of 1…
Created on: Friday 12th February 2021
Last updated: Friday 12th February 2021
Spatial data recorded.

Record ID: NMGW-AE04A7
Object type: VESSEL
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Post medieval copper alloy cooking vessel handle from a posnet or skillet of 16th to 17th century date The cast handle is from a cooking vessel and is near-complete, eroded at the terminal and includes a fragment of the vessel rim (with an overall length of 183mm and a weight of 240.8g). The handle is of D-shaped section with straight sides converging towards the terminal (with a width of 13mm – 32.0mm and a thickness of 6.1mm - 10.6mm). The top of the handle is decorated with a grooved border and there is the suggestion of applied decoration on the interior but the detail is n…
Created on: Wednesday 3rd February 2021
Last updated: Wednesday 3rd February 2021
Spatial data recorded.

Record ID: NMGW-053AC5
Object type: VESSEL
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
Late Medieval to early Post-Medieval copper alloy chafing dish handle of 15th to 17th century date. The handle is fragmentary, with only the outer end present, which is of bifurcating form and is broken at both ends (with a surviving length of 23.2mm and weighing 11.2g). The looped handle (56.5mm wide at the bifurcated end) is of sub-hexagonal section (between 3.2mm and 4.5mm thick and between 4.8mm and 6.2mm wide). The surface is corroded with remnants of a dark-green patina and with file marks evident on one face. The handle is likely to been attached to a lug riveted through the di…
Created on: Tuesday 26th January 2021
Last updated: Monday 2nd October 2023
Spatial data recorded.

Record ID: NMGW-EA5EA7
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation
Medieval copper alloy ewer spout of 14th or 15th century date The cast spout is fragmentary, represented by the zoomorphic end of the spout in the form of the head of a water bird, probably a duck (with a length of 41.8mm and a height of 24.2mm and a weight of 22.0g, including sediment). The neck has broken below the head and is sub-circular sectioned (with an external diameter of 11.1mm – 11.9mm and internal diameter of 7.0mm). The fragmentary spout is widens and deepest at the head (with a width of 14.2mm and a depth of 16.8mm). The bird is depicted with short incised marks c…
Created on: Monday 25th January 2021
Last updated: Monday 25th January 2021
Spatial data recorded.

Record ID: NMGW-5C8955
Object type: VESSEL
Broad period: ROMAN
County: Powys
Workflow stage: Awaiting validation
Roman copper alloy vessel handle from a jug, probably of 1st to 3rd century AD date The handle is fragmentary, missing the handle grip (with a surviving length of 37.0mm and a weight of 18.2g). The handle was originally fitted with a lid, hinged between twin open lugs on the upper part of the handle, now damaged (with a width of 11.1mm, an opening 4mm wide and a height of 7.2mm). Beneath the hinge are two curved arms, now damaged and truncated (with a surviving width of 23.9mm). The arms would have been soldered to the rim of the vessel (suggesting a rim diameter of approximately…
Created on: Monday 18th January 2021
Last updated: Monday 18th January 2021
Spatial data recorded.

Record ID: NMGW-5C70E8
Object type: VESSEL
Broad period: ROMAN
County: Powys
Workflow stage: Awaiting validation
Probable Roman copper alloy jug lid of 1st to 4th century AD date The cast lid is fragmentary and with only a very short length of original edge surviving (with a surviving length of 36.7mm, a surviving width of 32.4mm and a weight of 16.0g). The plate lid is thinnest around the edge (with a thickness of 1.3mm) and has a cast raised circular boss (of 22.3mm diameter, where the lid has a thickness of 3.0mm – 3.5mm). At the centre of the circle is an integral circular-sectioned handle lug (10.1mm diameter at its base, 11.9mm high and with an overall depth of 14.9mm). The top face…
Created on: Monday 18th January 2021
Last updated: Monday 18th January 2021
Spatial data recorded.

Record ID: NMGW-3144A3
Object type: VESSEL
Broad period: ROMAN
County: Pembrokeshire
Workflow stage: Published
Late Iron Age to Roman copper alloy anthropomorphic vessel escutcheon, handle mount probably from a bucket and of 1st Century BC to 3rd century AD date The cast looped mount is near complete but heavily corroded (with an overall length of 58.5mm and a weight of 40.0g). At the apex is an integral loop of sub-circular section (l6.7mm high, 16.3mm wide, 9.3mm internal diameter and 2.9mm – 5.4mm sectional diameter). The interior of the loop has wear facets discernible on the upper part of the loop interior, presumably the result of rubbing from the missing handle. Beneath the loop …
Created on: Monday 4th January 2021
Last updated: Tuesday 5th January 2021
Spatial data recorded.

Record ID: NMGW-65E967
Object type: VESSEL
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation
Copper alloy escutcheon or pendant probably of medieval date The delicate fitting appears to be near-complete (with a length of 24.6mm and a weight of 1.0g) and was suspended by an integral loop (8.4mm long, 2.9mm wide and 4.2mm deep), which has been coiled inwards to form the loop and projects to the front. The mount is shield-shaped (16.7mm long, 10.0mm wide and 1.2mm thick), now truncated at the base. At the centre of the mount is a circular perforation (3.0mm diameter) probably for attachment. The face is faceted where the loop enters the mount and the upper part of the mount h…
Created on: Monday 9th September 2019
Last updated: Wednesday 6th July 2022
Spatial data recorded.

Record ID: NMGW-5A5215
Object type: VESSEL
Broad period: MEDIEVAL
County: Cardiff
Workflow stage: Awaiting validation
Late Medieval copper alloy ewer spout, probably of 15th century date The zoomorphic ewer spout is in the form of a dog's head with the spout protruding from the open mouth. The spout is fragmentary, represented by the terminal (with a surviving length of 52.3mm and a weight of 50.4g). The dog is portrayed with oval and upright ears, protruding above the brow (by 1.2mm) and are concave across their widths. The snout is defined by a concave depression, flat along the upper surface and terminating in a raised projection. There is a subtle central ridge across the top of the dog's head, …
Created on: Thursday 15th February 2018
Last updated: Wednesday 6th July 2022
Spatial data recorded.

Record ID: NMGW-35AEB8
Object type: VESSEL
Broad period: IRON AGE
County: Denbighshire
Workflow stage: Published
Late Iron Age or Roman copper alloy zoomorphic mount, probably from a vessel The mount appears to be complete or near-complete (with an overall length of 58.7mm and a weight of 47.4g) and depicts a beast, probably a dog but possibly a pig cast in the round. The beast's snout is concave and would appear to be too elongated for a pig. The end of the snout appears to have two circular depressions depicting the nostrils. The mouth of the beast is biting on a piece of ferrous plate on one side, possibly the rim of a vessel. The plate does not extend to the opposite side. The eyes are …
Created on: Tuesday 17th February 2015
Last updated: Sunday 12th June 2016
Spatial data recorded.

Record ID: NMGW-1F6A1C
Object type: VESSEL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Late Medieval to early Post-Medieval copper alloy chafing dish handle of 15th to 17th century date. The handle is complete and of bifurcating form, with a stud for attachment to the dish (with an overall length of 62.3mm and weighing 42.7g). The looped handle (49.4mm long, 58.2mm wide at bifurcated end and 24.8mm wide at the attachment end) is of hexagonally faceted section (between 3.9mm and 5.1mm thick and between 4.6mm and 6mm wide). The attachment lug (22.6mm long) is of rectangular section (with a maximum width of 15.6mm and thickness of 9.0mm) with rounded sides, expanding …
Created on: Wednesday 4th February 2015
Last updated: Tuesday 13th October 2015
Spatial data recorded.

Record ID: NMGW-6337A6
Object type: VESSEL
Broad period: ROMAN
County: Carmarthenshire
Workflow stage: Awaiting validation
Copper alloy vessel mount of uncertain date, possibly Roman The mount is of looped form, probably representing the inner part of a hinge (with an overall length of 41.9mm and a weight of 13.6g). The attachment plate is of elongated lozenge form (with a length of 35.3mm, a width of 14.7mm and a thickness of 2.5mm - 3.7mm), which is slightly wedged, thinnest opposite the hinge. The mount was attached to the vessel by a single iron rivet, which is partially preserved (giving a surviving depth of 6.3mm). The opposite face has carefully bevelled edges and the iron rivet does not appear …
Created on: Friday 14th November 2014
Last updated: Friday 14th November 2014
Spatial data recorded.

Record ID: NMGW-8E4D47
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation
Post medieval copper alloy cooking vessel handle fragment from a posnet or skillet of 16th to 17th century date The fragment is the handle terminal from a cooking vessel (with a surviving length of 77.4mm and a weight of 156.5g). The handle is of D-shaped section at the break (with a width of 28.6mm and a thickness of 12.4mm) with straight and near-parallel sides before the terminal. The handle has a rounded step down to the terminal (10.4mm deep and giving an overall depth of 20.3mm), which has a rounded end. The body of the handle has a grooved border each side and a central deco…
Created on: Tuesday 4th November 2014
Last updated: Tuesday 4th November 2014
Spatial data recorded.

Record ID: NMGW-10AB77
Object type: VESSEL
Broad period: MEDIEVAL
County: Bridgend
Workflow stage: Awaiting validation
Late medieval to post medieval copper alloy cooking vessel fragment, probably from a cauldron or skillet of 15th to 18th century date The vessel comprises a rim fragment from the vessel (59.3mm long, 30.2mm wide and 2.2mm thick). The rim was outcurved and suggests a vessel diameter of approximately 250mm. Sheet copper alloy plate (0.7mm thick) was secondarily riveted to the rim and is crudely worked. The plate is folded around vessel rim and attached using two copper alloy rivets (10.8mm long). The plate is irregularly rectangular (51.3mm long and 46.0mm wide) and both top corners …
Created on: Friday 17th October 2014
Last updated: Friday 17th October 2014
Spatial data recorded.

Record ID: NMGW-0F7707
Object type: VESSEL
Broad period: UNKNOWN
County: Gloucestershire
Workflow stage: Awaiting validation
Copper alloy handle, possibly of Roman date The object is incomplete, broken at the narrow end (with a surviving length of 38.0mm and a weight of 4.5g). The complete end is of oval section and is rounded with an expanded terminal (with a width of 10.0mm and a thickness of 3.6mm). The handle gradually narrows towards a decorative double-ribbed moulding, which all the way around the fitting. The damaged end thins, as if to a blade (with a thickness of 1.1mm). The surface has a dark-green patina. It is possible that the object is the handle of a medical or cosmetic implement of Rom…
Created on: Friday 17th October 2014
Last updated: Friday 17th October 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-2EECF6
Object type: VESSEL
Broad period: ROMAN
County: Rhondda Cynon Taf
Workflow stage: Awaiting validation
Roman copper alloy vessel lid The lid is complete and includes the hinge from the copper alloy vessel (with an overall length of 59.3mm, a width of 46.5mm and a weight of 36.7g). The surviving fragment from the body of the vessel is solid and is broken at both ends (with a surviving height of 20.5mm and a surviving width of 19mm). The lug flares at the base towards the vessel and is likely to have converged to a rounded spike above the hinge. The hinge comprises two perforated lugs on the vessel (with a depth of 9.3mm and a width of 10.3mm), flanking a single central lug on the lid. A…
Created on: Friday 29th January 2010
Last updated: Thursday 6th March 2014
Spatial data recorded.

Record ID: NMGW-C4CF26
Object type: VESSEL
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
Copper alloy inscribed plate, probably of Roman period date The plate is fragmentary and has a surviving length of 27.5mm surviving height of 20.9mm and a weight of 6.9g. The plate has a thickness of 2.5-2.8mm. The base of the fragment has an original edge, while the other edges are broken. The plate is curved across both its length and height. On the front of the plate is deeply incised lettering and decoration. The letter R is discernible after a ring-and –dot motif. Both appear to be within a double curved border outside of which is a hatched design. The plate has broken along th…
Created on: Thursday 15th November 2007
Last updated: Friday 17th January 2014
Spatial data recorded.

Record ID: NMGW-C46CB4
Object type: VESSEL
Broad period: ROMAN
County: Wiltshire
Workflow stage: Published
Roman copper alloy vessel handle The handle is incomplete and is broken at one end, with a surviving length of 76.2mm and has a weight of 77.0g. The handle is deeply curved and is of lozenge section, with a thickness at the break of 9.1mm and a width of 7.4mm. At the top of the handle are zoomorphic figures, comprising a bird and horse. The seated bird, probably a duck, has a length of 37.0mm, a maximum width of 13.4mm and a height of 21.9mm. The feathers of the bird are depicted with transverse lines, forming chevrons at the rear. The horse is depicted on its back and is only represe…
Created on: Thursday 15th November 2007
Last updated: Tuesday 13th October 2015
Spatial data recorded.

Record ID: NMGW-C1B167
Object type: VESSEL
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
Roman copper alloy vessel or furniture leg The leg is complete and has a length of 64.3mm and a weight of 15.7g. The top of the leg has an L-shaped bracket (with a length of 11.2mm and a width of 5.3mm) to support a vessel above. Remnants of a white adhesive or solder are discernible on the surfaces of the bracket. The leg is of sub-lozenge section and has an undulating curve to the foot. The front of the leg is enhanced with moulded projections near the top and incised grooves around the mid-section. At the rear of the mid-section is an incomplete loop (7.8mm diameter), the interior …
Created on: Thursday 15th November 2007
Last updated: Monday 27th June 2011
Spatial data recorded.

Record ID: NMGW-097C90
Object type: VESSEL
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
Copper alloy vessel escutcheon and handle, probably of Roman period date. The handle comprises a looped escutcheon attached to the lower part of a handle. The rear or inside of the escutcheon has a rectangular plate (44.54 x 46.6mm) with a trapezoidal knop at the base (14.2mm long and 13.92mm wide). There are three perforations (of 3mm diameter) at the base of the escutcheon, two at the corners and one irregularly placed within the knop. The interior of the escutcheon has a shield-shaped or sub-triangular silvered mark (29.3mm high and 30.5mm wide), presumably as a result of a lost dec…
Created on: Tuesday 8th November 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NMGW-E23887
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation
Copper alloy cast cauldron or skillet leg fragment, broken at both ends, and probably of late Medieval or Post Medieval date. The leg is of trapezoidal section with a sharp rib on the outside face. The sides are parallel. Black deposits over the surface indicate heavy sooting and burning.
Created on: Tuesday 27th April 2004
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NMGW-E229B3
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation
Copper alloy cast cauldron or skillet leg fragment, broken at both ends, and probably of late Medieval or Post Medieval date. The leg is of low D-shaped section with a rounded rib on the outside face. The sides converge towards the foot and the leg thickens near the top break. Black deposits over the surface indicate heavy sooting and burning.
Created on: Tuesday 27th April 2004
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NMGW-F4A3F6
Object type: VESSEL
Broad period: ROMAN
County: Newport
Workflow stage: Published
Cast copper alloy mount in the form a small figurine of a banqueter of Roman date, probably from the 1st century AD. The figure is eroded with the original surface now missing. The figurine depicts a reclining banqueter resting on the left elbow. The figure appears to be naked above the waist. The lower part of the body and legs are covered with draperies, the folds of which are indicated by cast and recessed lines on the front and rear. The hand is visible against the base of drape. The rear of the figure may have further drapery over the left shoulder. No detail of the face or the re…
Created on: Wednesday 10th March 2004
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-A60BD5
Object type: VESSEL
Broad period: BRONZE AGE
County: Wiltshire
Workflow stage: Published
Curved cast bronze fragment, possibly a strap handle from a later prehistoric cauldron or metal vessel. The strap fragment has a little of the attachment plate surviving before two wide and rounded ribs. The strap is curved and would have secured the circular ring handle. Similar fittings can be found on the Llyn Fawr cauldrons and other sheet metal vessels from the Later Prehistoric period.
Created on: Wednesday 11th February 2004
Last updated: Monday 25th March 2019
Spatial data recorded.

Record ID: NMGW-746D03
Object type: VESSEL
Broad period: MEDIEVAL
County: Powys
Workflow stage: Published
Cast copper alloy ewer or laver spout of late Medieval date, probably dating from the 15-16th centuries. The spout is shaped in the form of a duck's head. Many ewer spouts are in the form of dog's heads such as the example recovered from Cardiff Castle (Lewis 1991, 4, fig. 8A), although duck head spouts have been recorded. The duck eyes are defined by an incised circular ring, the bill is open with a protruding short barrel emerging from the animal's mouth. The top of the animal's head is decorated with short incised lines at the centre and above the brows.
Created on: Friday 28th November 2003
Last updated: Monday 11th February 2019
No spatial data available.

Record ID: NMGW-72FDF0
Object type: VESSEL
Broad period: IRON AGE
County: Wrexham
Workflow stage: Published
Near complete copper alloy escutcheon from a hanging bowl or bucket, probably of Late Iron Age date, C. 50 BC to 100 AD. The escutcheon body is of globular form with an integral large incomplete loop, presumably to secure a handle. The body of the mount appears slightly domed, and is decorated with a motif consisting of two high raised moulded opposed semicircular arcs, with a slight break in-between the two. Beneath the raised motif is a circular attachment hole, placed off centre and surrounded with iron corrosion. It is possible to suggest this means of attachment is a secondary re…
Created on: Tuesday 16th September 2003
Last updated: Tuesday 2nd April 2019
Spatial data recorded.

Record ID: NMGW-0EFAA4
Object type: VESSEL
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Published
Copper alloy zoomorphic mount, probably from a vessel handle or lid and of Early Roman date. The mount depicts a sitting quadruped with its front legs extending out in front of the body, and possibly representing a bear or a dog. The animal is naturalistic in style. The hair is depicted by incised lines over the body, except for the top of the back, where a rectangular panel is decorated with two incised diagonal crosses divided by a single incised line. On the rear of the animal there is an integral flat circular perforated lug covered with iron corrosion, and possibly representing a …
Created on: Monday 18th August 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-D53460
Object type: VESSEL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published
Copper-alloy leg from a medieval or post-medieval cooking vessel, perhaps a cauldron or skillet. This is a short rectangular-sectioned leg with a bevelled base resulting in the bottom of the leg forming a narrow edge. The leg has broken at the junction with the body of the vessel, and rises to become expanded, with a concave upper surface. The patina and corrosion of the fragment suggests burning, as would be expected with a cooking vessel.
Created on: Tuesday 22nd July 2003
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NMGW-66C5E5
Object type: VESSEL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Rim fragment of a vessel, probably of Late Medieval date. The fragment is relatively thin and is suggestive of a vessel with a comparatively small rim diameter (originally approximately 70mm), possibly suggesting a fragment from a jug or tankard, similar to a mid 14th century tankard found at Caerphilly Castle (Lewis, 1978). The vessel has an incised or turned decorative band on the exterior, at the position of slight shoulder, two narrower incised lines flank the band.
Created on: Thursday 17th July 2003
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NMGW-66AD06
Object type: VESSEL
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy vessel escutcheon or mount in the form of a bird’s head. The escutcheon has a lower flat panel representing the breast of the bird and decorated with incised diagonal lines meeting at a central vertical line, beneath each of the diagonal lines are a row of chevrons to indicate the feathers. At the top of the panel is a circular drilled hole, possibly to hold a handle. The top of the perforation corresponds to the level of a step in the mount, presumably to house the vessel rim. The top of the mount is in the form of a pointed bird’s head with incised oval-shaped e…
Created on: Thursday 17th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-4070A6
Object type: VESSEL
Broad period: UNKNOWN
County: Monmouthshire
Workflow stage: Published
Fragment of a cast vessel handle or mount. The mount has two drilled attachment holes either side of a gently curved end. The beginning of the possible handle is defined by a low moulding present only on the upper area of the fragment. The handle has a ‘D’ shaped cross section, which becomes narrower as it approaches the broken end.
Created on: Tuesday 15th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-C3C0B6
Object type: VESSEL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast foot, probably from a cauldron, skillet or similar of Late Medieval or Post Medieval date. The foot has an irregular cast underside. The foot is expanded and has three claw-like projections. The leg gradually diverges and has a D-shaped cross section with an additional high prominent rib on the wider face. The top of the leg is broken.
Created on: Wednesday 9th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-AC8824
Object type: VESSEL
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Published
Cast copper alloy leg, probably from a skillet or small cauldron of Medieval or Post Medieval date. The leg has a 'D' shaped cross-section. There is a prominent horizontal moulding on the front of the leg. The sides taper gently towards the foot. The leg has an ancient break at the top with no surviving evidence for the body of the vessel. The base of the foot has evidence of wear.
Created on: Tuesday 8th July 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: NMGW-AC4736
Object type: VESSEL
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Published
Substantial cast copper alloy leg from a cauldron or skillet. The front of the leg has an expanded foot and a prominent central rib. The rear of the leg is plain with tapered edges. The fragment appears broken at both ends, with the base of the foot absent as well as the body of the vessel. The leg is covered in a black carbon deposit, as wood be expected in a cooking vessel.
Created on: Tuesday 8th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-996D16
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Published
Foot from a small cooking vessel, possibly a small cauldron or skillet. The foot has a flat back and rounded front with a rounded expanded base. The piece is covered in a black carbon deposit, as would be expected in a cooking vessel.
Created on: Monday 7th July 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: NMGW-989632
Object type: VESSEL
Broad period: ROMAN
County: Newport
Workflow stage: Published
Possible fragment from a vessel mount, possibly originating from an organic vessel, the contextual placing of the find may suggest a Roman date for the find. The mount has an expanded rim with a series of transverse ridges over the top. The rim has a slight plain inturn, before a low moulding defining a decorative panel consisting of a moulded vertical line, which meets a pair of moulded diagonal lines at the top. There is no obvious means of attachment. The rear of the piece is plain.
Created on: Monday 7th July 2003
Last updated: Tuesday 22nd July 2014
Spatial data recorded.

Record ID: NMGW-95A6E1
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Published
Cast copper alloy zoomorphic ewer spout shaped in the form of a dog’s head with a short barrel protruding from the animal’s mouth, probably of 15th or 16th century date. The dog is modelled with apparently closed eyes, small but upright ears and a slight crest on the back of its head. The spout illustrates no evidence of an attachment device, suggesting it was welded or soldered to the vessel. The spout is paralleled by examples from the moat at Cardiff Castle (Lewis 1991, 4, fig 8A)and an unprovenanced example (Bailey 1997, 57-58 no 5).
Created on: Monday 7th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-955CA3
Object type: VESSEL
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Published
Handle lug from a chafing dish of early Post-Medieval date. The lug has the integral rivet for attachment to the body of the dish and a perforation to hold the handle. The lug has flat faces with rounded sides and is rather irregular, with an uneven perforation. File marks are evident on both faces.
Created on: Monday 7th July 2003
Last updated: Monday 25th March 2024
Spatial data recorded.

Record ID: NMGW-2FC205
Object type: VESSEL
Broad period: ROMAN
County: Monmouthshire
Workflow stage: Published
Carefully constructed cast copper alloy decorative vessel escutcheon or mount in the form of a boar. The boar has its front legs extending forward beneath its mouth forming a V-shape, the mouth is open and contains a small circular hole. The snout end has signs of wear and is perforated through the side before a moulded tusk, possibly to house a ring attached to a handle. The hole in the mouth and the perforation through the snout do not meet. The eyes are incised and lentoid in form. The crest is erect and carries incised and possibly punched decoration to depict the hair. The crest a…
Created on: Wednesday 2nd July 2003
Last updated: Wednesday 14th February 2024
Spatial data recorded.

Record ID: NMGW-972BC1
Object type: VESSEL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published
Two rim fragments - one fragment has a rim form that is slightly expanded and rounded internally, the fragment is heavily sooted on the exterior, as is consistent with use as a cooking vessel. The other fragment has a more angular internal rim with less sooting evident on the exterior. Short and stumpy straight ridged leg, with central rib and two less pronounced side ribs. The top of the leg has an area of the vessel body attached. The leg has evidence of sooting, with an addition thick carbon deposit on the interior of the body.
Created on: Wednesday 25th June 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: NMGW-71A711
Object type: VESSEL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published
Cast copper alloy cauldron or skillet leg of Medieval date, probably dating from 13th - 16th century. The front of the leg has a prominent central rib and two side ribs near the top of the leg, where the leg joins the vessel. The rear of the leg has two chamfered edges. The interior of the vessel is present at the apex of the leg, which shows ancient breaks around its edge. One half of the front of the leg has been recently cleaned by the finder, the remainder of the leg exhibits heavy carbon deposits as a result of repeated burning, as would be expected on the surface of a cooking vessel.
Created on: Monday 23rd June 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: NMGW-6E3415
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Published
Rim fragment of a cast cooking vessel, probably of Medieval date. The exterior of the fragment is rain decorated, the interior is plain with a slight rounded mouth moulding. There is a crack running from one of the sides to the rim. All breaks are rounded and are of some age.
Created on: Monday 23rd June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-6DF594
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Published
Rim fragment of a cast cooking vessel, probably of Medieval date. The exterior of the fragment is rain decorated, the interior is plain with a slight rounded mouth moulding. There is a crack running from one of the sides to the rim. All breaks are rounded and are of some age.
Created on: Monday 23rd June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-6D3F16
Object type: VESSEL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy cauldron or skillet leg of Medieval date, probably dating from 13th - 16th century. The front of the leg has a prominent central rib and the rear of the leg has two chamfered edges. The fragment widens to an expanded foot. The leg has broken before the body of the vessel. The leg exhibits heavy carbon deposits as a result of repeated burning, as would be expected on the surface of a cooking vessel.
Created on: Monday 23rd June 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3394
Object type: VESSEL
Broad period: MEDIEVAL
County: Blaenau Gwent
Workflow stage: Published
Cast copper alloy vessel, leg, sub-trapezoidal in section. The outer edge and sides are decorated with longitudinal grooves. The leg tapers towards its rounded base. The weight of the vessel leg suggests that the copper alloy was leaded. Probably the leg of either a cauldron, skillet, jug or ewer. Close dating is not possible because the form of vessel legs remained similar from the late medieval period until the seventeenth century (Read 1995, 95). Length 46.5mm, maximum width 31.5mm, maximum thickness 20mm. Thirteenth to seventeenth century.
Created on: Thursday 8th November 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3291
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Published
Cast copper alloy vessel leg, sub-triangular in section, which tapers towards its angled foot. The foot is separated from the main part of the leg by a transverse ridge in the angle. The weight of the vessel leg suggests that the copper alloy was leaded. Possibly the leg of a tripod ewer. Close dating is difficult because the form of the vessel legs remained similar from the late medieval period until the seventeenth century (Read 1995, 95); however, the distinctive transverse ridge in the angle of the foot and leg of this example is closely paralleled by a vessel leg recovered from a …
Created on: Friday 21st September 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3277
Object type: VESSEL
Broad period: MEDIEVAL
Workflow stage: Published
Copper alloy pot leg. Medieval - post-medieval.
Created on: Monday 30th July 2001
Last updated: Tuesday 13th July 2021
No spatial data available.

• 

  Image not taken

Record ID: NMGW3278
Object type: VESSEL
Broad period: MEDIEVAL
Workflow stage: Published
Incomplete copper alloy pot leg. Medieval - post-medieval.
Created on: Monday 30th July 2001
Last updated: Tuesday 13th July 2021
No spatial data available.

• 

  Image not taken

Record ID: NMGW3215
Object type: VESSEL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published
Pot mend of a steeply sided vessel, crudely cast. Unusual metal type - microscopic examination suggests that it is a heavily leaded copper alloy which may have a tinned surface. Most pot mends are made from straight lead alloys and that this example has been made from a leaded copper alloy suggests that it may be a mend for a copper alloy vessel rather than a ceramic pot. Close dating is not possible but a medieval or post-medieval date is most likely. Dimensions 100m x 44mm x 4-8mm.
Created on: Monday 18th June 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3166
Object type: VESSEL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published
Cast copper alloy vessel foot. The foot has a rib on its external surface and tapers to a rounded point. The upper part of the casting is missing. Vessel feet are not uncommon detector finds (Bailey 1997, 36). Although examples which terminate in turned-out bases or paws are the most common type, examples with rounded tips are not unknown. Surviving length 79mm, max width (surviving) 35mm, max surviving thickness 16mm. Fifteenth to seventeenth century probably [i.e. Late Medieval - Early Post-Medieval]. Parallels: Lewis 1978, 36, no.45 (skillet); and Lewis 1978, 32, no.38 (Cauldron)
Created on: Tuesday 29th May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3105
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Complete cast copper alloy vessel leg. Part of the apparently integrally cast body of the vessel remains attached to the leg. Length 78mm, width 16-17 mm, weight 115.2 grams. Medieval to post-medieval. The surface of the leg is preferentially blackened in comparison to the inside of the vessel body; this "sooting" is a common phenomena and is due to oxidisation of the outer surface of the vessel through exposure to the cooking fire.
Created on: Tuesday 1st May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3108
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Cast copper alloy rim fragment from a wide and steep sided vessel (probably a cauldron). Surviving vessel depth 37mm, thickness 3.5-4.5mm, weight 42.1 grams. Medieval or post-medieval in date. Medieval cast copper alloy vessels are discussed by Egan (1998, 161-169); several post-medieval examples are noted by Margeson (1993, 90-94).
Created on: Tuesday 1st May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3100
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Crudely cast, slightly waisted, copper alloy vessel leg. Length 41mm, width 28-33mm, thickness 18mm, weight 77.4 grams. Identifying the vessel type that this leg is from is not possible. Presumably it was either a cauldron, skillet, jug or ewer. Close dating is equally difficult as the form of the legs like this did not change from the medieval period until the seventeenth century (Read 1995, 95).
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3101
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Several cast copper alloy vessel fragments including the basal end of two vessel legs form different vessels but both plano-convex in section and with decorative outer longitudinal ribs; cast copper alloy rim fragments from four different wide and steep sided vessels (probably cauldrons); and a cast copper alloy rim fragment from a wide and steep sided vessel which includes an integrally cast suspension loop, the upper part of which contains a pronounced wear facet.
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW393
Object type: VESSEL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Wall fragment of a cast copper alloy vessel with horizontal ridge. Unfortunately, the fragment is not large enough to determine the original form of the vessel with certainty but it is possibly from a tripod cauldron or skillet. Dimensions 64mm x 51mm, thickness 2.5mm, weight 34.1 grams. Medieval or Post-medieval in date.
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW390
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Published
Cast copper alloy rim fragment from a steep-sided vessel. The large diameter of the vessel suggests that it was used for cooking. Minimum depth of vessel 26mm, thickness 4mm. Probably medieval or post-medieval in date.
Created on: Wednesday 25th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW138
Object type: VESSEL
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Published
Fragment of crude vessel foot made from cast leaded copper alloy, plano-convex section. Maximum width 41mm, surviving height 31mm.
Created on: Friday 10th September 1999
Last updated: Wednesday 17th June 2015
Spatial data recorded. This findspot is known as 'Near Chippenham, Wiltshire', grid reference and parish protected.