• 

  Image not taken

Record ID: NMGW-C9BC91
Object type: VESSEL
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
Fragment of pale blue convex glass from a vessel, probably a bottle.
Created on: Monday 8th March 2004
Last updated: Thursday 24th February 2011
No spatial data available.

• 

  Image not taken

Record ID: NMGW-C9C564
Object type: VESSEL
Broad period: ROMAN
County: Wiltshire
Workflow stage: Published
42 sherds of Roman oxidised coarse wares, including 7 rim sherds, 1 handle and 6 base sherds. Most of the diagnostic sherds are suggestive of jars.
Created on: Monday 8th March 2004
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NMGW-F4A3F6
Object type: VESSEL
Broad period: ROMAN
County: Newport
Workflow stage: Published
Cast copper alloy mount in the form a small figurine of a banqueter of Roman date, probably from the 1st century AD. The figure is eroded with the original surface now missing. The figurine depicts a reclining banqueter resting on the left elbow. The figure appears to be naked above the waist. The lower part of the body and legs are covered with draperies, the folds of which are indicated by cast and recessed lines on the front and rear. The hand is visible against the base of drape. The rear of the figure may have further drapery over the left shoulder. No detail of the face or the re…
Created on: Wednesday 10th March 2004
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-6337A6
Object type: VESSEL
Broad period: ROMAN
County: Carmarthenshire
Workflow stage: Awaiting validation
Copper alloy vessel mount of uncertain date, possibly Roman The mount is of looped form, probably representing the inner part of a hinge (with an overall length of 41.9mm and a weight of 13.6g). The attachment plate is of elongated lozenge form (with a length of 35.3mm, a width of 14.7mm and a thickness of 2.5mm - 3.7mm), which is slightly wedged, thinnest opposite the hinge. The mount was attached to the vessel by a single iron rivet, which is partially preserved (giving a surviving depth of 6.3mm). The opposite face has carefully bevelled edges and the iron rivet does not appear …
Created on: Friday 14th November 2014
Last updated: Friday 14th November 2014
Spatial data recorded.

Record ID: NMGW-5C70E8
Object type: VESSEL
Broad period: ROMAN
County: Powys
Workflow stage: Awaiting validation
Probable Roman copper alloy jug lid of 1st to 4th century AD date The cast lid is fragmentary and with only a very short length of original edge surviving (with a surviving length of 36.7mm, a surviving width of 32.4mm and a weight of 16.0g). The plate lid is thinnest around the edge (with a thickness of 1.3mm) and has a cast raised circular boss (of 22.3mm diameter, where the lid has a thickness of 3.0mm – 3.5mm). At the centre of the circle is an integral circular-sectioned handle lug (10.1mm diameter at its base, 11.9mm high and with an overall depth of 14.9mm). The top face…
Created on: Monday 18th January 2021
Last updated: Monday 18th January 2021
Spatial data recorded.

Record ID: NMGW-5C8955
Object type: VESSEL
Broad period: ROMAN
County: Powys
Workflow stage: Awaiting validation
Roman copper alloy vessel handle from a jug, probably of 1st to 3rd century AD date The handle is fragmentary, missing the handle grip (with a surviving length of 37.0mm and a weight of 18.2g). The handle was originally fitted with a lid, hinged between twin open lugs on the upper part of the handle, now damaged (with a width of 11.1mm, an opening 4mm wide and a height of 7.2mm). Beneath the hinge are two curved arms, now damaged and truncated (with a surviving width of 23.9mm). The arms would have been soldered to the rim of the vessel (suggesting a rim diameter of approximately…
Created on: Monday 18th January 2021
Last updated: Monday 18th January 2021
Spatial data recorded.

Record ID: NMGW-3DADB6
Object type: VESSEL
Broad period: ROMAN
County: Monmouthshire
Workflow stage: Awaiting validation
Copper alloy vessel handle, possibly from a jug of Roman date The handle is complete (with a length of 68.3mm, a depth of 19mm and a weight of 35.7g) but no part of the container vessel survives. The handle is of S-shaped form and has flattened attachment points on each end. The upper, oval attachment point (14.5mm long x 9.4m m wide) has an outward angle, whereas the lower, sub-triangular attachment point (12.5mm long x 12.5m m wide) is near-vertical. The handle is of oval section, widening to its furthest point (where it has a width and thickness of 12.5mm and 9.9mm respective…
Created on: Monday 22nd February 2021
Last updated: Monday 22nd February 2021
Spatial data recorded.

Record ID: NMGW-30ACA3
Object type: VESSEL
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Published
The two silver items are both fragmentary: Fragment 1: a small rectangular piece of hack-silver, cut from a silver vessel. All four edges have been cut, and there is a hesitant transverse cut running inside one of the longer edges. Both faces of the silver are plain, and the fragment is flat. Maximum length 14mm x width 9.1mm x thickness 2.6mm. Weight 2.27g. Fragment 2: small 'pie-slice' fragment from a circular lid or vessel rim, with a plain bevelled edge. The surviving rim diameter can be estimated at about 9-10cm. Maximum length 15.6mm x width 16.45 x maximum thickness…
Created on: Monday 8th July 2019
Last updated: Monday 30th September 2019
Spatial data recorded.

Record ID: NMGW-FD08F4
Object type: VESSEL
Broad period: ROMAN
County: Powys
Workflow stage: Published
An incomplete cast copper alloy vessel foot of Roman date. The object is crudely pelta shaped, with a central triangular projection and flanking lobes on one edge, the other being convex. The object is covered by soil, with areas of corrosion disrupting the dark green patinated surface. One end of the object is broken, leading to a reduced length. Pelta shaped vessel feet are well documented, with many examples recorded on the PAS database (e.g. PUBLIC-749A73 and ESS-8C8A14), and excavated from Roman contexts such as in Caerleon (Brewer, 1986, pg. 173). They are believed to have…
Created on: Thursday 27th May 2021
Last updated: Thursday 30th September 2021
Spatial data recorded.

Record ID: NMGW-3144A3
Object type: VESSEL
Broad period: ROMAN
County: Pembrokeshire
Workflow stage: Published
Late Iron Age to Roman copper alloy anthropomorphic vessel escutcheon, handle mount probably from a bucket and of 1st Century BC to 3rd century AD date The cast looped mount is near complete but heavily corroded (with an overall length of 58.5mm and a weight of 40.0g). At the apex is an integral loop of sub-circular section (l6.7mm high, 16.3mm wide, 9.3mm internal diameter and 2.9mm – 5.4mm sectional diameter). The interior of the loop has wear facets discernible on the upper part of the loop interior, presumably the result of rubbing from the missing handle. Beneath the loop …
Created on: Monday 4th January 2021
Last updated: Tuesday 5th January 2021
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-561F22
Object type: VESSEL
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
Three sherds of a Roman fineware beaker; two rim sherds and a shoulder.
Created on: Wednesday 14th January 2004
Last updated: Monday 17th October 2022
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-560B27
Object type: VESSEL
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
Spout or narrow neck from a coarseware oxidised Roman vessel.
Created on: Wednesday 14th January 2004
Last updated: Monday 17th October 2022
Spatial data recorded.

Record ID: NMGW-94EE4E
Object type: VESSEL
Broad period: ROMAN
County: Monmouthshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy vessel handle of probable Late Iron Age or Roman date (1st century BC-1st century AD). The head is flat and sub-oval (14.3mm x 15.3mm, 2.5mm thick) with a sub-oval perforation (7mm x 5.8mm). The shaft is 7.0mm wide and 2.5mm thick at the bottom of the head and gradually extends to the break where it reaches a width of 11.9mm and 3.7mm thick. The shaft is bent 15.7mm down from the head giving the object an overall distorted length of 62.5mm. Some filing marks are visible on the reverse. The object is a medium green patina with patches of bright green bron…
Created on: Monday 8th November 2021
Last updated: Monday 9th January 2023
Spatial data recorded.

Record ID: NMGW-2FC205
Object type: VESSEL
Broad period: ROMAN
County: Monmouthshire
Workflow stage: Published
Carefully constructed cast copper alloy decorative vessel escutcheon or mount in the form of a boar. The boar has its front legs extending forward beneath its mouth forming a V-shape, the mouth is open and contains a small circular hole. The snout end has signs of wear and is perforated through the side before a moulded tusk, possibly to house a ring attached to a handle. The hole in the mouth and the perforation through the snout do not meet. The eyes are incised and lentoid in form. The crest is erect and carries incised and possibly punched decoration to depict the hair. The crest a…
Created on: Wednesday 2nd July 2003
Last updated: Wednesday 14th February 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW388
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Pembrokeshire
Workflow stage: Published
A glazed rim sherd probably from a seventeenth century vessel manufactured in Devon.
Created on: Wednesday 25th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-9486C6
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Monmouthshire
Workflow stage: Published
Post-medieval body sherd in a hard well-fired orange fabric.
Created on: Monday 7th July 2003
Last updated: Thursday 10th March 2011
Spatial data recorded.

Record ID: NMGW-8E4D47
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation
Post medieval copper alloy cooking vessel handle fragment from a posnet or skillet of 16th to 17th century date The fragment is the handle terminal from a cooking vessel (with a surviving length of 77.4mm and a weight of 156.5g). The handle is of D-shaped section at the break (with a width of 28.6mm and a thickness of 12.4mm) with straight and near-parallel sides before the terminal. The handle has a rounded step down to the terminal (10.4mm deep and giving an overall depth of 20.3mm), which has a rounded end. The body of the handle has a grooved border each side and a central deco…
Created on: Tuesday 4th November 2014
Last updated: Tuesday 4th November 2014
Spatial data recorded.

Record ID: NMGW-AE04A7
Object type: VESSEL
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Post medieval copper alloy cooking vessel handle from a posnet or skillet of 16th to 17th century date The cast handle is from a cooking vessel and is near-complete, eroded at the terminal and includes a fragment of the vessel rim (with an overall length of 183mm and a weight of 240.8g). The handle is of D-shaped section with straight sides converging towards the terminal (with a width of 13mm – 32.0mm and a thickness of 6.1mm - 10.6mm). The top of the handle is decorated with a grooved border and there is the suggestion of applied decoration on the interior but the detail is n…
Created on: Wednesday 3rd February 2021
Last updated: Wednesday 3rd February 2021
Spatial data recorded.

Record ID: NMGW-EDA652
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Rhondda Cynon Taf
Workflow stage: Awaiting validation
Post medieval lead vessel probably of 17th or 18th century date The vessel is incomplete with peripheral damage to one side and is of D-shaped form (with a length of 53.4mm and a weight of 66.2g). The distorted mouth is considerably expanded and incomplete on one side (with a surviving width of 54mm and a mouth depth of 15.5mm). The outside convex face is decorated with a double punched border and a single punched border defined the top of the body and base of the rim. No other decoration is now evident on the vessel. The interior of the vessel is uneven (54mm deep). The rear and und…
Created on: Thursday 22nd February 2018
Last updated: Wednesday 6th July 2022
Spatial data recorded.

Record ID: NMGW-3B60DB
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Powys
Workflow stage: Awaiting validation
Post medieval lead vessel probably of 17th or 18th century The vessel is near-complete with some peripheral damage and is of D-shaped form (with a weight of 210.5g). The mouth (60.7mm wide and 35.9mm long) has a stepped moulding (with a depth of 7.3mm - 13.9mm and 5mm thick) on the curved part only. One of the corners is higher (giving a maximum overall height of 34.5mm) and has a spout-like form. The interior of the vessel is uneven (28mm deep). The rear and underside of the vessel are flat, with no obvious means of attachment. The surface has a grey patina with white corrosion. …
Created on: Tuesday 7th October 2014
Last updated: Tuesday 7th October 2014
Spatial data recorded.