Record ID: NMGW-C5C30F
Object type: HOARD
Broad period: BRONZE AGE
County: Bridgend
Workflow stage: Published
Two socketed axes (Cat. Nos. 1-2, below) were found together in the same metal-detector pit at approximate depths of 0.15-0.23m (6-9 inches) below the ground surface. A further socketed axe and a casting jet (Cat. Nos. 3 & 7, below) were also later recovered from the same metal detector pit, at approximate depths of 0.25-0.30m (10-12 inches). A socketed axe blade fragment (Cat. No. 4, below) was discovered approximately 17m to the east of the detector pit, whilst a palstave fragment (Cat. No. 5, below) was discovered approximately 2m to the north-north-east of the detector pit. &nb…
Created on: Thursday 21st March 2024
Last updated: Thursday 21st March 2024
Spatial data recorded. This findspot is known as 'Coychurch Higher Community', grid reference and parish protected.

Record ID: NMGW-A4C317
Object type: SWORD
Broad period: BRONZE AGE
County: the Vale of Glamorgan
Workflow stage: Published
One of three fragments of a Late Bronze Age copper-alloy leaf-shaped sword. The morphology indicates that the sword is of Ewart Park Type, a widespread type which belongs to the Ewart Park Metalworking Assemblage (c. 1000-800 BC) (Needham 1996; Needham et al. 1997). This is the third fragment, representing the lower blade- other fragments are recorded as NMGW-A49E88 and NMGW-A4A891. The sword is incomplete, missing the terminal end of the hilt and the majority of the mid- and lower blade. There is a clear refit between the lower hilt and upper blade fragments, whilst th…
Created on: Monday 14th August 2023
Last updated: Wednesday 20th March 2024
Spatial data recorded.

Record ID: NMGW-3A90AA
Object type: DIRK
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Published
Middle Bronze Age bronze dirk, probably of Group III weapons with a damaged butt The dirk is near-complete with some peripheral damage to the butt (with a length of 121.3mm and a weight of 31.0g). The apex and shoulders of the butt are corroded and rounded (with a width of 31.1mm and a thickness at the apex of 0.8mm). There are the remains of a rivet hole on one side (with a diameter of 5.9mm) and probably the corroded remains on another on the opposite side.  It is now unclear whether the butt has significantly eroded around the rivet holes or whether the dirk has a reworked but…
Created on: Tuesday 14th November 2023
Last updated: Wednesday 20th March 2024
Spatial data recorded.

Record ID: NMGW-68D7B6
Object type: HAMMER
Broad period: BRONZE AGE
County: West Berkshire
Workflow stage: Awaiting validation
A complete cast copper alloy socketed hammer head of middle to late Bronze Age date (c.1500-700 BC). The hammer is long and narrow, sub-rectangular/sub-trapezoidal in plan and section (total length 85.2mm). One end contains a socket with a sub-rectangular, almost circular and slightly expanded mouth (external dimensions 14.6mm tall x 14.3mm wide*, internal dimensions of mouth 11.1mm tall x 12mm wide x appx.12.1mm deep) with a narrow moulded collar (8.5mm long). The sides of the hammer are straight and taper very gently from the collar (dimensions just after collar: 10.3mm wide x 10.5mm…
Created on: Tuesday 16th January 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.

Record ID: NMGW-EAB5C7
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: Wiltshire
Workflow stage: Awaiting validation
Dimensions: length 84.7mm; length of blade 39.2mm; max. surviving width of blade 14.2mm; external socket diameter 14.9mm; internal socket diameter 12.4mm; approx. length of side-loops 10-10.4mm; depth of socket 53.8mm; weight 21.62g Middle Bronze Age bronze socketed spearhead of Davis’ Group 6: Developed side-looped (2012), and probably dating to the Acton Park-Taunton metalworking assemblages (c. 1550-1250 BC). The spearhead is complete and relatively short in overall length, with a short and slender leaf shaped blade. The midrib is pronounced and lozenge shaped in cross-secti…
Created on: Wednesday 10th January 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.

Record ID: NMGW-FF674E
Object type: HOARD
Broad period: BRONZE AGE
County: the Vale of Glamorgan
Workflow stage: Published
Introduction (AG & CG) A Late Bronze Age hoard of seven bronze artefacts (eleven fragments), was discovered by Mr Mark Herman on 8th September 2019 while metal-detecting on a field under arable in Pendoylan Community, Vale of Glamorgan. Ten of the fragments (Nos. 2-11) were found together in a single localized cluster, located a maximum distance of 1.2m (4 feet) from each other. A single socketed axe (No. 1, below) was found approximately c. 2.1-2.5 m (7-8 feet) away from the main group of artefacts and within the same area of the same field. Most artefacts (Nos. 2-11) were rep…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Pendoylan Community', grid reference and parish protected.

Record ID: NMGW-FF1B4E
Object type: HOARD
Broad period: BRONZE AGE
County: Cardiff
Workflow stage: Published
Introduction A Late Bronze Age hoard of 39 fragments representing a minimum of 38 artefacts was discovered by Dr Peter Anning on 2nd February 2021 while metal-detecting on a field following agricultural drainage work. All of the artefacts were reported as being discovered within an area of 2.4m (8 feet) of each other, of each other and at approximate depths of 20-30cm (8-12 inches). Full details of the findspot (NGR) and the addresses of the finders and the landowner are provided on the Treasure Receipt form for this case. The discovery was first reported to Mark Lodwick, Co-ordi…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'St Fagans Community', grid reference and parish protected.

Record ID: NMGW-FEEBD1
Object type: HOARD
Broad period: BRONZE AGE
County: Monmouthshire
Workflow stage: Published
1.0 Discovery & reporting A Late Bronze Age hoard comprising a bronze socketed axe fragment and a bronze sword blade fragment was discovered on 2nd April 2021 by Peter Griffiths (finder of the axe) and Luke Harris (finder of the sword blade) while metal-detecting on a field under improved pasture in Llanover Community, Monmouthshire. The two artefacts were reported as being found within 60cm (2 feet) of each other, each at depths of 25cm (10 inches). Full details of the findspot (NGR) and the addresses of the finders and the landowner are provided on the Treasure Receipt form for…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Llanover Community', grid reference and parish protected.

Record ID: NMGW-FEA9FC
Object type: HOARD
Broad period: BRONZE AGE
County: Cardiff
Workflow stage: Published
Discovery (CG & AG) A Late Bronze Age hoard of six fragments, representing four artefacts, was discovered by Dr Peter Anning on 30th October 2020 while metal-detecting in a field under pasture in Pontprennau Community, Cardiff. These included four sword blade fragments (Nos. 1-4, below) and two casting jets (Nos. 5-6, below). The artefacts were all discovered within the same field, scattered over an area of 3.5-4.0 square metres (12 square feet) and found at variable depths of between 8-20cm (3-8 inches). A further copper alloy ‘dumbbell’ shaped artefact (No. 7, bel…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Pontprennau Community', grid reference and parish protected.

Record ID: NMGW-FDE8FE
Object type: HOARD
Broad period: BRONZE AGE
County: the Vale of Glamorgan
Workflow stage: Published
1.0 Discovery & reporting (AG) A Late Bronze Age hoard comprising three bronze socketed axe fragments and a bronze sword blade fragment were discovered on 27th and 28th March 2021 by David Nicklin while metal-detecting in a field under pasture in Llanmaes Community, Vale of Glamorgan. The four artefact fragments were found within the same area of the single field at depths of 20-25cm (8-10 inches) and had been scattered a maximum distance of 38.7 metres from each other. A socketed axe blade fragment (No.2, below) was found 11.3m to the south-west of the sword blade fragment (No. 1…
Created on: Tuesday 23rd January 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Llanmaes Community', grid reference and parish protected.

Record ID: NMGW-095467
Object type: HOARD
Broad period: BRONZE AGE
County: Ceredigion
Workflow stage: Published
1.0 Discovery, reporting & findspot investigation (AG, CG & CE) A Late Bronze Age hoard was discovered by Craig Hearne and Kieran Slade on 13th January 2020 while metal-detecting on a field under pasture in Llangeitho Community, Ceredigion.  Initially, 17 artefacts were reported as part of this find with a further 9 artefacts found scattered within ploughsoil in the immediate vicinity during January and February 2020, which were also reported and added to this hoard find. A second hoard of 38 fragments from a minimum of 25 artefacts, with a central findspot located approx…
Created on: Wednesday 6th December 2023
Last updated: Wednesday 21st February 2024
Spatial data recorded.

Record ID: NMGW-08BBD9
Object type: HOARD
Broad period: BRONZE AGE
County: Ceredigion
Workflow stage: Published
1.0 Discovery, reporting & findspot investigation (AG, CG & CE) A Late Bronze Age hoard was discovered by Craig Hearne and Kieran Slade on 13th January 2020 while metal-detecting on a field under pasture in Llangeitho Community, Ceredigion.  Initially, 33 fragments from a minimum of 23 artefacts were reported as part of this find, with a further 11 artefact fragments found scattered at later dates between late January and early March 2020, subsequently reported and added to this hoard find. A second hoard of 25 artefacts, with a central findspot located approximately 10m …
Created on: Wednesday 6th December 2023
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'Llangeitho Community', grid reference and parish protected.

Record ID: NMGW-615AC8
Object type: PENANNULAR RING
Broad period: BRONZE AGE
County: the Vale of Glamorgan
Workflow stage: Published
Gold penannular ring Dimensions: external diameter (front to back) 10.1mm, external diameter (side to side) 10.7mm, internal diameter (front to back) approx. 6.0mm; internal diameter (side to side) approx. 6.5mm, diameter of body (internal to external) approx. 2.0mm; diameter of body (upper to lower face) 2.5mm, distance between terminals 0.3-0.5mm, weight (before conservation cleaning) 0.27g. This is a complete and very small penannular ring of gold with incised linear decoration around its sides and external diameter surface. Judging from surface dents and a localised small tear …
Created on: Tuesday 28th November 2023
Last updated: Wednesday 21st February 2024
Spatial data recorded. This findspot is known as 'St. Nicholas and Bonvilston Community', grid reference and parish protected.

Record ID: NMGW-2DED9C
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: County of Herefordshire
Workflow stage: Awaiting validation
A fragment of cast copper alloy spearhead dating from the Middle to Late Bronze Age (c. 1500BC-800BC). The fragment represents only the very tip of the spearhead and is heavily corroded. The loss of diagnostic features due to damage means it is impossible to assign this fragment to a precise type and date range. The spearhead fragment is triangular in plan, with an irregular terminating break 42.7mm below the tip. The majority of the original surface is missing along with the blade edges and original tip, but what remains is straight edges tapering to the tip, with a prominent midrib …
Created on: Tuesday 27th September 2022
Last updated: Friday 2nd February 2024
Spatial data recorded.

Record ID: NMGW-FC3F4D
Object type: CHISEL
Broad period: BRONZE AGE
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
An incomplete Late Bronze Age cast copper alloy tanged chisel, probably of Wilburton or Ewart Park metalworking industry, dating from 1150 to 750 BC. The object comprises of part of the tang and a significant part of the blade. The chisel tang is oval in cross-section, and has a surviving length of 19.03mm from the break to the collar. The break is worn and heavily patinated suggesting damage in antiquity. The tang flares as it reaches the collar which is sub oval in form. From the collar the blade chisel flares, beginning at 8.33mm wide and expanding to a surviving width of 13.78mm. …
Created on: Wednesday 7th June 2023
Last updated: Wednesday 31st January 2024
Spatial data recorded.

Record ID: NMGW-CDE50B
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Powys
Workflow stage: Awaiting validation
An incomplete Early Bronze Age cast copper alloy flat axe of undeterminable type, dating from c. 2200 to 1800 BC. The axe is incomplete due to surface loss. It has a surviving length of 76.79mm. The blade end is crescentric in shape, it has a surviving blade width of 44.79mm.  From the blade, the body of the axe narrows in shape, and terminates in a rounded butt. The axe is broadly lenticular when viewed in profile, although heavy corrosion has altered its shape. The axe has a heavily textured surface caused by corrosion; it is copper-green in colour with areas of reddish brown…
Created on: Friday 15th December 2023
Last updated: Tuesday 30th January 2024
Spatial data recorded.

Record ID: NMGW-83CC4B
Object type: BLADE
Broad period: BRONZE AGE
County: Bridgend
Workflow stage: Awaiting validation
A fragment of Late Bronze Age cast copper alloy blade, possibly of Ewart Park type, dating from c. 1000 to 800 BC. The blade fragment has a surviving length of 64.39mm, with a surviving width of 33.23mm across the top break, and 26.18mm across the lower break. It is broadly trapezoid in plan and is lenticular in cross-section. On one blade face there is evidence of a midrib approximately 12.0mm wide. The blade edges are heavily eroded leaving no original surface. The break surface at the wider end of the fragment is worn with green corrosion, suggestive of the blade being possibly b…
Created on: Tuesday 30th January 2024
Last updated: Tuesday 30th January 2024
Spatial data recorded.

Record ID: NMGW-9B796D
Object type: MINIATURE OBJECT
Broad period: BRONZE AGE
County: Dorset
Workflow stage: Awaiting validation
Miniature copper alloy axe of Late Bronze Age to Romano-British date (c. 1200 BC -AD 400) and probably of Robinson's (1988, p61) type I. The miniature axe head is complete but is slightly distorted along its length and is of comparatively elongated form (with an overall length of 28.9mm and a weight of 4.8g). The butt or mouth is sub-square (4.9mm x 4.7mm) and has a transverse ridge separating the mouth from the top of the loop. The mouth encloses a small, shallow and irregular depression, probably representing a socket. The miniature axe head has a maximum width across the loop (of 10…
Created on: Tuesday 6th February 2018
Last updated: Thursday 18th January 2024
Spatial data recorded.

Record ID: NMGW-7ECFB8
Object type: DRESS FASTENER (DRESS)
Broad period: BRONZE AGE
County: Gloucestershire
Workflow stage: Published
Copper alloy ring of uncertain date, possibly a Late Bronze Age dress-fastener The ring is near-complete, with minimal peripheral damage to one of the terminals (with an overall height of 47.8mm and a weight of 99.1g). The terminals are joined but there is a fracture between the two sides (giving the object an overall width of 76.9mm). The terminals are circular but are irregular (with a diameter of 40mm) and are angled upwards towards the midpoint. The underside of the terminals have a crescent-shaped bevel on the outer edges, elsewhere the underside is concave and appears unfinished …
Created on: Friday 26th February 2010
Last updated: Monday 8th January 2024
Spatial data recorded.

Record ID: NMGW-84F1C2
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Merthyr Tydfil
Workflow stage: Awaiting validation
Middle Bronze Age bronze palstave of Group III, Low Flanged, Broad Blade form and possibly of Type Harlech, as defined by Schmidt & Burgess (1981, p137) . The palstave is near-complete, with minimum peripheral damage (with a length of 156mm and a weight of 394.2g). The butt is damaged but was likely to have been moderately straight (with a width of 18.3mm and a thickness of 3mm). The sides from the butt to the stop are near-parallel, gently convex (with a maximum width of 26.1mm). The loop is irregular and extends either side of the stop (with a length of 32mm, an internal length o…
Created on: Monday 5th February 2018
Last updated: Wednesday 29th November 2023
Spatial data recorded.