Back to simple search | Back to advanced search

    You searched for:

    • Institution: NMGW
    • Direction: desc
    • Sort: objectType
    • Page: 10

  • Thumbnail image of NMGW-972BC1

Record ID: NMGW-972BC1
Object type: VESSEL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published Find published
Two rim fragments - one fragment has a rim form that is slightly expanded and rounded internally, the fragment is heavily sooted on the exterior, as is consistent with use as a cooking vessel. The other fragment has a more angular internal rim with less sooting evident on the exterior. Short and stumpy straight ridged leg, with central rib and two less pronounced side ribs. The top of the leg has an area of the vessel body attached. The leg has evidence of sooting, with an addition thick carbon deposit on the interior of the body.
Created on: Wednesday 25th June 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.


  • Thumbnail image of NMGW-AC8824

Record ID: NMGW-AC8824
Object type: VESSEL
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Published Find published
Cast copper alloy leg, probably from a skillet or small cauldron of Medieval or Post Medieval date. The leg has a 'D' shaped cross-section. There is a prominent horizontal moulding on the front of the leg. The sides taper gently towards the foot. The leg has an ancient break at the top with no surviving evidence for the body of the vessel. The base of the foot has evidence of wear.
Created on: Tuesday 8th July 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.


  • Thumbnail image of NMGW-996D16

Record ID: NMGW-996D16
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Published Find published
Foot from a small cooking vessel, possibly a small cauldron or skillet. The foot has a flat back and rounded front with a rounded expanded base. The piece is covered in a black carbon deposit, as would be expected in a cooking vessel.
Created on: Monday 7th July 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.


  • Thumbnail image of NMGW-71A711

Record ID: NMGW-71A711
Object type: VESSEL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published Find published
Cast copper alloy cauldron or skillet leg of Medieval date, probably dating from 13th - 16th century. The front of the leg has a prominent central rib and two side ribs near the top of the leg, where the leg joins the vessel. The rear of the leg has two chamfered edges. The interior of the vessel is present at the apex of the leg, which shows ancient breaks around its edge. One half of the front of the leg has been recently cleaned by the finder, the remainder of the leg exhibits heavy carbon deposits as a result of repeated burning, as would be expected on the surface of a cooking vessel.
Created on: Monday 23rd June 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.


  • Thumbnail image of NMGW-6D3F16

Record ID: NMGW-6D3F16
Object type: VESSEL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published Find published
Cast copper alloy cauldron or skillet leg of Medieval date, probably dating from 13th - 16th century. The front of the leg has a prominent central rib and the rear of the leg has two chamfered edges. The fragment widens to an expanded foot. The leg has broken before the body of the vessel. The leg exhibits heavy carbon deposits as a result of repeated burning, as would be expected on the surface of a cooking vessel.
Created on: Monday 23rd June 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.


  • Image not taken

Record ID: NMGW3261
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Powys
Workflow stage: Published Find published
Cast copper alloy cylindrical fitting. There is a small recess surrounded by a slight concentric moulding in the centre of the base. Three concentric mouldings at the other end give way to part of a narrower sub-rectangular sectioned projection, the end of which is missing. Surviving length 26mm, diameter 19mm. The date and function of the fitting are uncertain; however, its patination is consistent with a Roman date and the possibility that it is contemporary with the slide-key can not be dismissed.
Created on: Tuesday 3rd July 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW3274
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Cardiff
Workflow stage: Published Find published
Cast copper alloy hooked fitting. The main body of the fitting consists of an oval plate bordered by transverse bars at either end. One end of the fitting terminates in a tapering strip which is folded over to form an elongated hook, while the other contains the broken remains of a loop. The end of the hook is missing. The transverse bars are both decorated with two incised grooves. Traces of possible tinning are visible on parts of the fitting. Much corroded. Minimum length 52.5mm, maximum width 19.5mm. The fitting is closely paralleled by an unprovenanced example published by Bailey …
Created on: Thursday 5th July 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW337
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Neath Port Talbot
Workflow stage: Published Find published
Iron artefact of uncertain function consisting of an incomplete tapering 'blade' with rounded shoulders connected to a thick, rectangular-sectioned tang or handle. The end of the blade is missing. Total length 267mm, maximum width of 'blade' 48mm, surviving length of 'blade' 145mm, length of tang 122mm. Heavily corroded.
Created on: Tuesday 10th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW329
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
Workflow stage: Published Find published
Possible ornamental plant holder or piece of garden furniture made from some form of copper alloy (probably either brass or bronze). It consists of a three-finned spike which tapers to a point at one end, while at the other is connected, through a narrowing shoulder, into a decorative terminal. The terminal takes the form of the head of a fabulous beast with a short elephant-like trunk and a simple interlace collar around its neck; the spike protruding from its open mouth. The animal head terminal is incomplete being broken across the neck of the beast. Study of this break shows eviden…
Created on: Thursday 15th March 2001
Last updated: Thursday 24th February 2011
No spatial data available.


  • Image not taken

Record ID: NMGW3391
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Published Find published
Cruciform cast copper alloy fitting decorated on one side with an incised fleur-de-lis design against a hatched background and on the other side with an incised central checkerboard design made up of nine squares with a simple border against a hatched background. The fitting forms an equal-sided Maltese type cross, remnants of a flash line suggest that it was cast in a two-part mould. A central perforation runs through the longitudinal (as defined by the fleur-de-lis motif) axis of the fitting. The perforation is slightly worn at the base of the fitting. Although no close parallels ca…
Created on: Thursday 8th November 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW387
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Pembrokeshire
Workflow stage: Published Find published
Curved tapering cast copper alloy rod which is broken at its thickest end and terminates in a near spherical boss at the other. At its widest point the rod is sub-rectangular in section but it becomes circular in section towards the terminal. Length 86mm, diameter of terminal c.18mm, weight 53.5 grams. The piece is probably the cross-hilt, inner guard or quillon of a dagger, rapier or sword, however not enough of the casting survives to be certain or suggest exactly what type of hilt this may have been part of. Suggested finder send object to the Royal Armouries Museum, Leeds.
Created on: Thursday 19th April 2001
Last updated: Thursday 12th September 2013
Spatial data recorded.


  • Image not taken

Record ID: NMGW357
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Monmouthshire
Workflow stage: Published Find published
Stone ball. Diameter 33mm. The function of the ball is uncertain; however, it is possibly a baking ball used to hold down empty pastry cases to stop them rising in the oven. Dating is problematic but if it is a baking ball then it may be relatively recent in date.
Created on: Wednesday 18th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW397
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Published Find published
Crude copper alloy sub-conical casting with a flat basal end and sub-circular section. Dimensions 26mm x 20mm x 18mm, weight 23.4 grams. Identification is difficult; superficially the casting resembles the lower part of a vessel foot but it may also be an oddly shaped casting jet. Date uncertain.
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NMGW-E6F8E6

Record ID: NMGW-E6F8E6
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Newport
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy looped swivel of uncertain date, possibly Roman The fitting comprises two parts (with an overall length of 42.0mm and a weight of 20.2g), a looped peg inside a double-hooked frame with socket. The loop is circular (with a diameter of 19.2mm and an internal diameter of 12.4mm) and is of eroded sub-square section. Beneath the loop is a tapering plug, seemingly cast within a circular socket and is held by two strips, which engage with grooves in the plug. Each side of the socket has an integral hook (with a width of 39.3mm and a depth of 21.1mm). There is a decorative groove…
Created on: Wednesday 5th March 2008
Last updated: Tuesday 11th March 2014
Spatial data recorded.


  • Thumbnail image of NMGW-414723

Record ID: NMGW-414723
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Monmouthshire
Workflow stage: Published Find published
Sheet copper alloy strip, broken or cut along three of its sides, with one of the ends being bent prior to breaking. The outer complete edge exhibits a slight curvature and suggests the strip may have been curved. The piece is crudely decorated with a series of linear chisel marks forming two lines running along the strip. There is a further more continuous linear depression running along the broken or cut side.
Created on: Tuesday 15th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NMGW-FCE6A5

Record ID: NMGW-FCE6A5
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy anthropomorphic terminal of uncertain date The terminal is in the form of a human head and has broken across the neck (with a surviving length of 18.6mm, a maximum width of 8.6mm, a maximum thickness of 10.4mm and a weight of 7.5g). The terminal is heavily-corroded and the corrosion has removed much of the detail, there are depressions depicting the eyes and a central ridge is evident indicating the position of the nose. Another depression surviving on one side only is likely to depict a ear. The surviving form and style would indicate a comparatively naturalistic de…
Created on: Wednesday 21st January 2015
Last updated: Wednesday 21st January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-7384A9

Record ID: NMGW-7384A9
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy object, possibly a surgical implement of Roman date The object is fragmentary, broken or cut on one end and is slightly distorted (with a distorted length of 118.6mm and a weight of 2.4g). Approximately half of the abject is circular-sectioned (1.6mm diameter) and the other half is flattened with a subtle midrib on one face and flat on the opposite face (with a width of 2.7mm and a thickness of 1.2mm). The midrib ends before the break, where the object is slightly thicker (at 1.9mm) possibly because of cutting with a pliers or similar tool. The surface has been strip…
Created on: Friday 20th February 2015
Last updated: Friday 20th February 2015
Spatial data recorded.


  • Thumbnail image of NMGW-1C90DE

Record ID: NMGW-1C90DE
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Monmouthshire
Workflow stage: Awaiting validation Find awaiting validation
Uncertain copper alloy hinged fragment, possibly an unusual form of Roman T-shaped brooch of 1st or 2nd century AD date The possible brooch is fragmentary, represented by the head only (with a surviving length of 14.5mm, a surviving depth of 7.9mm and a weight of 9.8g). The object had a hinged pin or similar between tubular wings with an iron copper alloy axis bar, evident at both ends and the centre. The wings are truncated (with a surviving width of 32.5mm and a diameter of 5.3mm) and are decorated with diagonal mouldings near the bow. There is a prominent cut between the wings…
Created on: Monday 16th February 2015
Last updated: Monday 16th February 2015
No spatial data available.


  • Image not taken

Record ID: NMGW-573091
Object type: UNIDENTIFIED OBJECT
Broad period: BRONZE AGE
County: Monmouthshire
Workflow stage: Published Find published
Probable Bronze Age gold strip fragment. This is a semi-worked thickened strip fragment of gold of broadly rectangular shape. The strip has been worked and there are hammer facets visible on the flat surfaces and side margins. One edge has been hammered up and has a projecting margin on one face edge. The strip was broken at one end with a double-grip tool without sharp edges. As a result, there is widening, lateral distortion with thinning at one end, near the break. On one face, the break has created a near flat angled facet, while on the reverse there is a distinct concave curva…
Created on: Thursday 17th August 2017
Last updated: Thursday 17th August 2017
Spatial data recorded.


  • Thumbnail image of NMGW-738029

Record ID: NMGW-738029
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy decorative terminal, possibly from a pin of Roman date The object is fragmentary, represented by the damaged terminal; a shaft fragment (with a surviving length of 33.4mm and a weight of 3.4g). The top of the terminal was conical (with a basal diameter of 7.0mm) and is heavily corroded, with a differential corrosion, beneath which the terminal is of faceted-globular form before a moulding above the top of the shaft. The shaft is circular sectioned and gradually widens (from a diameter of 2.8mm to 5.0mm) before narrowing slightly towards the break. The surface has a d…
Created on: Wednesday 4th March 2015
Last updated: Wednesday 4th March 2015
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 4,287
Search server index: asgard

You are viewing records: 181 - 200.

Search statistics

  • Total quantity: 14,396
  • Mean quantity: 3.358
  • Maximum: 3,547

Filter your search

181 - 200 of 4,287 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.