Record ID: NMGW-04CB62
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
Decorated copper alloy rod of uncertain date The rod now forms an open, sub-oval ring but was of uncertain original from (with a length of 48.1mm, a height of 35mm, a straightened length of approximately 106mm and a weight of 5.5g) and is broken on one end. The complete terminal is flattened (with a thickness of 1.6mm and 4.0mm wide) but the loss of the surface has removed any decoration. The rod is of sub-square section (4.0mm wide and 3.5mm thick) and is decorated with closely spaced ribbing. The decoration covered all four sides of the rod but has worn away on the upper face, …
Created on: Tuesday 26th January 2021
Last updated: Tuesday 26th January 2021
Spatial data recorded.

Record ID: NMGW-4103A5
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
Copper alloy terminal fitting, from an uncertain object probably of Roman date The terminal is of spherical form with a basal moulding and has a short fragment from the integral connecting rod at the base (with an overall length of 13.6mm and a weight of 3.5g). The sphere (with a maximum diameter of 9.6mm) has no applied decoration but a slight casting flaw is evident. The waist (with a minimum diameter of 6.2mm) is grooved before the rounded basal lobe. The integral pin is circular-sectioned (2.2mm diameter and with a 1.6mm surviving length). The surface is worn with a mid-green…
Created on: Wednesday 10th February 2021
Last updated: Wednesday 10th February 2021
Spatial data recorded.

Record ID: NMGW-6A1DDC
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Dorset
Workflow stage: Awaiting validation
Copper alloy annular fitting or possibly bead of uncertain date The cast fitting is complete and of annular form (with a diameter of 12.7mm and a weight of 4.4g) with a rectangular section (5.4mm thick). The perforation is positioned off-centre and is circular (with a diameter of 5.3mm). Both faces are decorated with nine punched ring-and-dot devices but with the encircling rings now largely worn. The edge is also decorated with ring-and-dots and has suffered even more wear. The positioning of the ring-and-dot decoration is somewhat irregular. The surface is pitted with a green-g…
Created on: Friday 12th February 2021
Last updated: Friday 12th February 2021
Spatial data recorded.

Record ID: NMGW-A78182
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Copper alloy fitting, possibly a medieval damaged coin balance arm perhaps of 13th or 14th century date The fitting is fragmentary, distorted and heavily-corroded (with a length of 62.6mm and a weight of 10.9g). One end has worn and corroded to a point and is of sub-triangular section gradually widens to a moulding on the mid-section of rounded quadrangular section (6.8mm wide and 9.2mm thick). The moulding had a midrib on the sides and a loop or hinge on the base (8mm wide and 3mm internal) but with only the stubs surviving. On the top surface is a rectangular remnant of a furth…
Created on: Monday 15th February 2021
Last updated: Monday 15th February 2021
Spatial data recorded.

Record ID: NMGW-A79324
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Monmouthshire
Workflow stage: Awaiting validation
Cast copper alloy collar fitting of uncertain date, possibly Iron Age The fitting comprises a comparatively substantial crude casting and appears to be complete but is a composite part, of U-shaped form (with a height of 27.3mm, an external diameter of 34.4mm, an internal diameter of 22.2mm and a weight of 62.5g). Both sides are straight and near parallel (with a width of 32.3mm at one end and 30.0mm at the other). The face has heavy ribbing, with a rib on each side and a midrib (giving a maximum thickness of 7.0mm). The terminals have integral lugs, which are likely to have enga…
Created on: Monday 15th February 2021
Last updated: Monday 15th February 2021
Spatial data recorded.

Record ID: NMGW-3C35C5
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Copper alloy decorative pyramidal terminal of uncertain date The terminal is complete (16.8mm long) but the ferrous attachment bar is fragmentary (giving an overall surviving length of 17.8mm and a weight of 5.3g). The terminal has a near-square base (10.5mm x 9.7mm), with straight flat sides converging towards the apex, enhanced with a spherical knop (5.6mm diameter). Little decoration survives on the terminal but the domed head of an iron pin (4mm diameter and 0.4mm high) is evident on one face, to secure the terminal to the shaft. Beneath the iron pin is the suggestion of line…
Created on: Monday 22nd February 2021
Last updated: Monday 22nd February 2021
Spatial data recorded.

Record ID: NMGW-42C745
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Isle of Anglesey
Workflow stage: Awaiting validation
A cast copper alloy object of unknown function, likely of post medieval date. The object is 45mm diameter disc of copper alloy 5mm thick. The obverse of the disc is decorated in relief moulding, with a circular central cell surrounded by four concentric circular ridges. The central cell is decorated in relief with an pseudoheraldic animal, possibly a dog or lion. The attitude of the pseudoheraldic is passant to sinister (moving to the viewer's right). The reverse is undecorated and covered in a dark patina with patches of corrosion. The object is reminiscent of livery and hu…
Created on: Monday 12th April 2021
Last updated: Tuesday 27th April 2021
Spatial data recorded.

Record ID: NMGW-6F7DE1
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Wiltshire
Workflow stage: Awaiting validation
Copper alloy anthropomorphic cast head of uncertain date The solid cast head is complete but has broken around the neck (with a surviving length of 39.5mm and a weight of 112.6g). The head is crudely but skilfully moulded and was clearly cast from a clay or wax pattern, as evidenced by the soft ‘plastic’ moulding marks. The head is of an older male and is depicted without hair and the ears are evident as curved raised wedges. The raised brows are particularly prominent as is the wide and clearly defined nose. The recessed eyes are outlined with grooves and with a central ind…
Created on: Tuesday 19th January 2021
Last updated: Tuesday 19th January 2021
Spatial data recorded.

Record ID: NMGW-AF1FCC
Object type: UNIDENTIFIED OBJECT
Broad period: BRONZE AGE
County: Monmouthshire
Workflow stage: Published
Copper alloy mount or fitting of uncertain function and date, probably of Late Bronze Age or Iron Age date and possibly a scabbard chape. The possible cast mount is complete (with a length of 23.5mm, a height of 22.9mm and a weight of 18.0g). The mount is of bulbous bi-lobed form (21.5mm wide and 13.1mm thick) with a curving point projecting from each lobe. At the centre is a shallow rounded groove, widest at the base. Both lobes are decorated with prominent ribbing defined by grooves. The lobes terminate in gently curving points of rounded D-shaped section, slightly flattened on t…
Created on: Thursday 3rd May 2018
Last updated: Thursday 21st June 2018
Spatial data recorded.

Record ID: NMGW-3263D2
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Wiltshire
Workflow stage: Awaiting validation
The strip is broken at one end but appears to be complete on the other (with a surviving length of 108.2mm and a weight of 2.6g). The complete end has a straight terminal (6.0mm wide and 0.3mm thick) and the sides are straight and near-parallel for their surviving length. The strip is decorated on one face with a central row of hand-punched dots and the terminal has a border of punched dots. The decoration is interrupted near the centre (55mm from the terminal and 43mm from the broken end) where there is an undecorated but has three ridges across its width. The surface is worn with as…
Created on: Monday 4th January 2021
Last updated: Monday 4th January 2021
Spatial data recorded.

Record ID: NMGW-346C2E
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Pembrokeshire
Workflow stage: Awaiting validation
Copper alloy socketed and looped fitting of uncertain date The cast fitting appears to be near-complete but corroded and worn (with a length of 32.8mm and a weight of 15.4g) and is comparatively crude casting. The socket interior is of trilobed form (13mm both wide and long and 13mm – 17mm deep), open at both ends and with a break at the rear. There are decorative mouldings on the outside of the socket, comprising opposing arcs on the concave edges, with one face deeper than the other. There is an integral loop (12mm long, 4.5mm -6.8mm thick with an internal diameter of 7.6mm) …
Created on: Monday 4th January 2021
Last updated: Wednesday 6th July 2022
Spatial data recorded.

Record ID: NMGW-F3C26A
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Rhondda Cynon Taf
Workflow stage: Awaiting validation
Copper alloy terminal probably of Roman date The cast terminal is of faceted, onion-shaped form (with a length of 24.0mm, a diameter of 10.6mm – 12.4mm and a weight of 6.5g). There is a knop at the apex and a double-collar moulding at the base. Beneath the collar is an integral attachment pin of rectangular section (3.1mm x 4.0mm). There is no surviving applied decoration on the terminal. The surface is corroded and pitted with a pale to mid-green patina. The missing component part that the terminal was attached to makes identification and dating difficult. However, the …
Created on: Wednesday 13th January 2021
Last updated: Wednesday 13th January 2021
Spatial data recorded.

Record ID: NMGW-ADE00E
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation
A fragment of cast copper alloy and enamel object of unknown purpose, but certainly of Roman date (c. 43-410 AD). The object represents only a fragment of an unknown object, ending in breaks at both ends (the sides appear to be damaged original edges). The object is very broadly rectangular in shape, though the longer edges are concave. These edges are 12.3mm wide in the middle, and 20.17mm at the top and 21.2mm wide at the bottom. The object runs in a slight curve, with concave reverse and convex front. The broken top edge of the object projects slightly more than the bottom. The rev…
Created on: Monday 4th April 2022
Last updated: Tuesday 25th October 2022
Spatial data recorded.

Record ID: NMGW-74EB6F
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
A fragment of a copper alloy unidentified artefact, possibly a brooch, and Roman in age. The fragment has a hollow back and iron corrosion which resembles springs, this is at the widest point of the object (10.8mm). The sides then taper to a width of 1.7mm, the narrowest point in the fragment, right above the flared foot (3.8mm). On the front of the object, at the centre of the widest point, there are the remains of a stud where a vertical line coming from the foot and a horizontal line meet. The fragment has a rough green and purple patina, and signs of iron corrosion on the back.
Created on: Tuesday 6th September 2022
Last updated: Wednesday 26th October 2022
Spatial data recorded.

Record ID: NMGW-C87F84
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation
A copper alloy object of uncertain date, use, and completeness. The object consists of a spike, square in cross section and tapering to a point, it is 65.5mm long.  The top of the object measures 8.51mm by 8.54mm, it is broadly flat but somewhat uneven, possibly suggestive of a break.   The object is a mid-brown colour with areas of uneven green corrosion.
Created on: Tuesday 4th April 2023
Last updated: Wednesday 5th April 2023
Spatial data recorded. This findspot is known as 'Gower', grid reference and parish protected.

Record ID: NMGW-1896F6
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
An incomplete cast copper alloy object of uncertain function, likely of Post Medieval date (c.AD 1600-1800). The object is an arch with a flattened top in plan and sub-rectangular in section, with an undulating and irregular surface (max dimensions 80mm long x 38.4mm wide x 21.9mm thick). The object is broken approximately in half, with half of a circular hole measuring 35.8mm internal diameter. It was suggested by Dr Mark Redknap that the object may be associated with metalworking. The metal is a rough dark green patina and weighs 256.10g. XRF results showed the alloy is consistent w…
Created on: Monday 25th September 2023
Last updated: Monday 25th September 2023
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3341
Object type: TUMBREL
Broad period: MEDIEVAL
County: Isle of Anglesey
Workflow stage: Published
Copper alloy tumbrel consisting of two elements, that is a vertical element and a separately cast balance arm, which articulate in such a way that when the balance is not in use it can be folded flat. The hollow-backed vertical element expands from an acorn finial at the top, through a slotted central section to a flattened foot with a damaged and incomplete base. The base of the foot widens to accommodate a vertically slotted socket in which traces of ferrous corrosion survive. The front of the vertical element is decorated with a double moulding and the slotted socket is decorated w…
Created on: Friday 26th October 2001
Last updated: Wednesday 16th November 2016
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW115
Object type: TOY
Broad period: POST MEDIEVAL
Workflow stage: Published
Miniature copper alloy (probably brass) gun, petronel, with hollow bore and touch hole. Externally, the top of the barrel is chamfered to give three faces with defined edges; there is slight chamfering on the underside of the barrel also. The barrel is undecorated. Part of the finger-guard is missing. Closely paralleled by an unprovenanced example (Bailey 1995, 45, no.8). Length 74mm, weight 15.3 grams.
Created on: Wednesday 8th September 1999
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NMGW-4DE241
Object type: TOY
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Near complete, bur corroded copper alloy toy riffle or petronel of Post Medieval date, probably 17th century. The butt is slender and rises to a point with a damaged ‘guard’. The butt gradually thickens towards the barrel and was decorated with ring and dot decoration. The barrel is of faceted-circular section and has a small circular hole on one side to take a charge. The barrel of the gun is blocked from the end, presumably with the ram rod.
Created on: Wednesday 26th November 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-86BFD9
Object type: TOY
Broad period: POST MEDIEVAL
County: Flintshire
Workflow stage: Awaiting validation
Post medieval copper alloy toy cannon probably of 18th century date The gun is near-complete but has some damage around the barrel and appears to have been cast in one-piece (with a length of 43mm and a weight of 9.70g). The gun has a rounded cascabel and a prominent concave vent field (10.2mm diameter) with a comparatively large vent. The barrel is corroded and worn but is mostly plain with a slightly thickened first reinforce. The muzzle is defined by a groove and is very slightly thickened (at 6.2mm). The trunnions are comparatively long and slender (29.3mm wide). The surface …
Created on: Thursday 5th March 2015
Last updated: Thursday 5th March 2015
Spatial data recorded.

Record ID: NMGW-64C76E
Object type: TOY
Broad period: POST MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation
Post medieval copper alloy toy cannon of 17th or 18th century date The gun is near-complete but the barrel is exploded and appears to have been cast in one-piece (with a length of 71.5mm and a weight of 37.0g). The cascable comprises a globular knob on a concave fillet before a prominent base ring (of 14.3mm diameter). The vent is a small circular hole (of 2.4mm diameter) and there is a moulding for the first reinforce (12.9mm diameter). The trunnions are positioned near the mid-point of the gun (with a width of 24.1mm and a diameter of 5.8mm). The ends of the trunnions are narrowed …
Created on: Monday 26th January 2015
Last updated: Monday 26th January 2015
Spatial data recorded.

Record ID: NMGW-9D9BEC
Object type: TOY
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Post medieval copper alloy toy gun of 17th - 18th century date The gun is incomplete missing the butt and trigger guard (with a surviving length of 57.9mm and a weight of 12.8g). The barrel is of sub-oval section, with straight, faceted sides and is widest at the stock (at 6.8mm and 5.3mm x 6.8mm at the end of the barrel). The corrosion has closed barrel, making it difficult to determine the bore. The vent is small and is also closed by corrosion with a rounded wedge beneath the pan, which may have served as a hold for the match (Egan & Forsyth 2005, 89). Possibly Egan and Forsyt…
Created on: Tuesday 10th February 2015
Last updated: Tuesday 10th February 2015
Spatial data recorded.

Record ID: NMGW-EB860B
Object type: TOY
Broad period: POST MEDIEVAL
County: Newport
Workflow stage: Awaiting validation
Post medieval copper alloy toy gun of 17th – 18th century date The gun is incomplete missing the butt, trigger guard and is truncated through corrosion (with a surviving length of 54.3mm and a weight of 8.9g). The barrel is of faceted, sub-oval section, with straight sides and is widest at the stock (at 7.4mm and 5.0mm x 5.mm at the damaged end of the barrel). The bore of the gun is 3.1mm. There are decorative grooves evident along the barrel. The vent is small and is closed by corrosion with a rounded moulding beneath the pan, which may have served to hold the match (Egan & F…
Created on: Monday 25th January 2021
Last updated: Wednesday 6th July 2022
Spatial data recorded. This findspot is known as 'Malthouse Lane', grid reference and parish protected.

Record ID: NMGW-04BB8B
Object type: TOY
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation
Post medieval copper alloy toy cannon probably of 18th century date The gun is complete but has lost the surface to corrosion and was cast in one-piece (with a length of 40.4mm and a weight of 5.1g). The gun has a rounded cascabel and a prominent concave vent field (7.5mm diameter) with a small vent. The barrel is mostly plain with a reinforce ring positioned at the trunnions. The muzzle is of concave, spool (with a maximum diameter of 6.8mm) and with a bore of 4.5mm. The trunnions are comparatively long and slender (25.0mm long with a diameter of 2.6mm). The surface is heavily-c…
Created on: Tuesday 26th January 2021
Last updated: Tuesday 26th January 2021
Spatial data recorded.

Record ID: NMGW-C87B3E
Object type: TOY
Broad period: POST MEDIEVAL
County: Bridgend
Workflow stage: Awaiting validation
Post medieval lead toy watch or clock of mid 17th to 19th century date The toy is fragmentary missing both the upper and lower areas (with a surviving length of 39.1mm, a surviving width of 45.6mm and a weight of 12.0g) and comprises a circular lead disc (of approximately 60mm diameter and 0.9mm thick). The front is decorated with a design in cast relief, with an outer ring of radiating lines, inside of which are decorative arcs and pellets. The ring containing the numerals has the numbers VII, VIII, IX, X and XI. The damaged hands are evident in the central ring (17mm diameter) …
Created on: Wednesday 30th December 2020
Last updated: Wednesday 30th December 2020
Spatial data recorded.

Record ID: NMGW-7FAC90
Object type: TORC
Broad period: IRON AGE
County: the Vale of Glamorgan
Workflow stage: Published
Late Iron Age copper alloy bead from a beaded torc of 1st to early 2nd century AD date The bead is of cruciform or quatrefoil form (with a length of 24.6mm, width of 22.6mm and a weight of 3.4g) and has a central sub-square aperture (9.4mm x 8.4mm) through the central flat-sectioned plate (0.7mm thick) to accommodate the iron rod, on which the beads would have been 'strung'. The four lobes are oval and convex (with a length of 10mm and a width of 8mm) with flanges on both faces to accommodate adjacent beads. Only one of the lobes has decoration, comprising linear incised lines, seemi…
Created on: Friday 26th February 2010
Last updated: Tuesday 23rd May 2017
Spatial data recorded.

Record ID: NMGW-1B5576
Object type: TORC
Broad period: IRON AGE
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Late Iron Age copper alloy bead from a beaded torc of 1st to early 2nd century AD date The bead is near-complete and is of irregular, sub-triangular form but with a concave recess that is flanked by protruding knops at each vertex (with a length of 23.4mm, a width of 26.7mm and a weight of 6.5g). At the centre is a sub-square aperture (8.2mm x 7.7mm) through the flat-sectioned plate (2.2mm thick) to accommodate the missing iron rod, on which the beads would have been 'strung' flanked by spacers. The faces of the flat plate are somewhat irregular and not less finished. The two forward-f…
Created on: Wednesday 31st January 2018
Last updated: Thursday 19th January 2023
Spatial data recorded.

Record ID: NMGW-576054
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation
Henry, farthing, 1663 BW Devon 28, 0.710g, corroded.
Created on: Wednesday 27th February 2008
Last updated: Wednesday 15th January 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3222
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Pembrokeshire
Workflow stage: Published
Copper alloy halfpenny token, 1795. Obverse: A profile bust of the Duke of York in naval uniform, facing right. Beneath is HALFPENNY 1795 in two lines. Legend: FRED. K DUKE OF YORK. Reverse: A first-rate ship-of-the-line sailing to the right. Legend: THE WOODEN WALLS OF ENGLAND. Edge: PAYABLE IN DUBLIN OR LONDON.+.+. Struck anonymously, for general circulation. Probably made in Birmingham. The original surfaces have largely been lost through corrosion.
Created on: Monday 25th June 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW358
Object type: TOKEN
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
'Bristol & South West' penny token 1811. Issuer unknown but substantial numbers were made and circulated widely.
Created on: Wednesday 18th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-E137F1
Object type: TOKEN
Broad period: POST MEDIEVAL
County: South Gloucestershire
Workflow stage: Published
From Tetbury, Gloucestershire; town farthing
Created on: Wednesday 4th June 2003
Last updated: Tuesday 15th March 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-05B083
Object type: TOKEN
Broad period: POST MEDIEVAL
County: South Gloucestershire
Workflow stage: Published
Copper farthing token of Tetbury, Gloucestershire, town issue.
Created on: Friday 6th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-05DB80
Object type: TOKEN
Broad period: POST MEDIEVAL
County: South Gloucestershire
Workflow stage: Published
Copper halfpenny token of John Wilkinson, iron master.
Created on: Friday 6th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-D3C280
Object type: TOKEN
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
City of Bristol Farthing token
Created on: Thursday 10th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-BCD813
Object type: TOKEN
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Copper municipal farthing token of Bristol (1652), 'The Armes Bristol'
Created on: Monday 21st July 2003
Last updated: Friday 13th April 2018
No spatial data available.

• 

  Image not taken

Record ID: NMGW-D0E160
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Published
Farthing token of John Dash in 'Caln' (Calne)1669 Tallowch and Lers' Arms BW Wilts 25
Created on: Tuesday 22nd July 2003
Last updated: Wednesday 11th April 2018
No spatial data available.

• 

  Image not taken

Record ID: NMGW-D17FB2
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Gloucestershire
Workflow stage: Published
Farthing token of George Hoart, 1669
Created on: Tuesday 22nd July 2003
Last updated: Wednesday 11th April 2018
No spatial data available.

• 

  Image not taken

Record ID: NMGW-D19F14
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Published
Farthing token of Matthew Meade 1669
Created on: Tuesday 22nd July 2003
Last updated: Wednesday 11th April 2018
No spatial data available.

• 

  Image not taken

Record ID: NMGW-BAB355
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Gloucestershire
Workflow stage: Published
Nicholas Staight (probably) Apothelay, Tewkesbury, Gloucestershire.
Created on: Thursday 14th August 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-37C8A6
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Gloucestershire
Workflow stage: Published
Licensed farthing token
Created on: Wednesday 20th August 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.