• 

  Image not taken

Record ID: NMGW3215
Object type: VESSEL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published
Pot mend of a steeply sided vessel, crudely cast. Unusual metal type - microscopic examination suggests that it is a heavily leaded copper alloy which may have a tinned surface. Most pot mends are made from straight lead alloys and that this example has been made from a leaded copper alloy suggests that it may be a mend for a copper alloy vessel rather than a ceramic pot. Close dating is not possible but a medieval or post-medieval date is most likely. Dimensions 100m x 44mm x 4-8mm.
Created on: Monday 18th June 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3277
Object type: VESSEL
Broad period: MEDIEVAL
Workflow stage: Published
Copper alloy pot leg. Medieval - post-medieval.
Created on: Monday 30th July 2001
Last updated: Tuesday 13th July 2021
No spatial data available.

• 

  Image not taken

Record ID: NMGW3278
Object type: VESSEL
Broad period: MEDIEVAL
Workflow stage: Published
Incomplete copper alloy pot leg. Medieval - post-medieval.
Created on: Monday 30th July 2001
Last updated: Tuesday 13th July 2021
No spatial data available.

• 

  Image not taken

Record ID: NMGW3291
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Published
Cast copper alloy vessel leg, sub-triangular in section, which tapers towards its angled foot. The foot is separated from the main part of the leg by a transverse ridge in the angle. The weight of the vessel leg suggests that the copper alloy was leaded. Possibly the leg of a tripod ewer. Close dating is difficult because the form of the vessel legs remained similar from the late medieval period until the seventeenth century (Read 1995, 95); however, the distinctive transverse ridge in the angle of the foot and leg of this example is closely paralleled by a vessel leg recovered from a …
Created on: Friday 21st September 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3394
Object type: VESSEL
Broad period: MEDIEVAL
County: Blaenau Gwent
Workflow stage: Published
Cast copper alloy vessel, leg, sub-trapezoidal in section. The outer edge and sides are decorated with longitudinal grooves. The leg tapers towards its rounded base. The weight of the vessel leg suggests that the copper alloy was leaded. Probably the leg of either a cauldron, skillet, jug or ewer. Close dating is not possible because the form of vessel legs remained similar from the late medieval period until the seventeenth century (Read 1995, 95). Length 46.5mm, maximum width 31.5mm, maximum thickness 20mm. Thirteenth to seventeenth century.
Created on: Thursday 8th November 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW390
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Published
Cast copper alloy rim fragment from a steep-sided vessel. The large diameter of the vessel suggests that it was used for cooking. Minimum depth of vessel 26mm, thickness 4mm. Probably medieval or post-medieval in date.
Created on: Wednesday 25th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW393
Object type: VESSEL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Wall fragment of a cast copper alloy vessel with horizontal ridge. Unfortunately, the fragment is not large enough to determine the original form of the vessel with certainty but it is possibly from a tripod cauldron or skillet. Dimensions 64mm x 51mm, thickness 2.5mm, weight 34.1 grams. Medieval or Post-medieval in date.
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-097C90
Object type: VESSEL
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
Copper alloy vessel escutcheon and handle, probably of Roman period date. The handle comprises a looped escutcheon attached to the lower part of a handle. The rear or inside of the escutcheon has a rectangular plate (44.54 x 46.6mm) with a trapezoidal knop at the base (14.2mm long and 13.92mm wide). There are three perforations (of 3mm diameter) at the base of the escutcheon, two at the corners and one irregularly placed within the knop. The interior of the escutcheon has a shield-shaped or sub-triangular silvered mark (29.3mm high and 30.5mm wide), presumably as a result of a lost dec…
Created on: Tuesday 8th November 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NMGW-6D3F16
Object type: VESSEL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy cauldron or skillet leg of Medieval date, probably dating from 13th - 16th century. The front of the leg has a prominent central rib and the rear of the leg has two chamfered edges. The fragment widens to an expanded foot. The leg has broken before the body of the vessel. The leg exhibits heavy carbon deposits as a result of repeated burning, as would be expected on the surface of a cooking vessel.
Created on: Monday 23rd June 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-6DF594
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Published
Rim fragment of a cast cooking vessel, probably of Medieval date. The exterior of the fragment is rain decorated, the interior is plain with a slight rounded mouth moulding. There is a crack running from one of the sides to the rim. All breaks are rounded and are of some age.
Created on: Monday 23rd June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-6E3415
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Published
Rim fragment of a cast cooking vessel, probably of Medieval date. The exterior of the fragment is rain decorated, the interior is plain with a slight rounded mouth moulding. There is a crack running from one of the sides to the rim. All breaks are rounded and are of some age.
Created on: Monday 23rd June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-71A711
Object type: VESSEL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published
Cast copper alloy cauldron or skillet leg of Medieval date, probably dating from 13th - 16th century. The front of the leg has a prominent central rib and two side ribs near the top of the leg, where the leg joins the vessel. The rear of the leg has two chamfered edges. The interior of the vessel is present at the apex of the leg, which shows ancient breaks around its edge. One half of the front of the leg has been recently cleaned by the finder, the remainder of the leg exhibits heavy carbon deposits as a result of repeated burning, as would be expected on the surface of a cooking vessel.
Created on: Monday 23rd June 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: NMGW-972BC1
Object type: VESSEL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published
Two rim fragments - one fragment has a rim form that is slightly expanded and rounded internally, the fragment is heavily sooted on the exterior, as is consistent with use as a cooking vessel. The other fragment has a more angular internal rim with less sooting evident on the exterior. Short and stumpy straight ridged leg, with central rib and two less pronounced side ribs. The top of the leg has an area of the vessel body attached. The leg has evidence of sooting, with an addition thick carbon deposit on the interior of the body.
Created on: Wednesday 25th June 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: NMGW-95A6E1
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Published
Cast copper alloy zoomorphic ewer spout shaped in the form of a dog’s head with a short barrel protruding from the animal’s mouth, probably of 15th or 16th century date. The dog is modelled with apparently closed eyes, small but upright ears and a slight crest on the back of its head. The spout illustrates no evidence of an attachment device, suggesting it was welded or soldered to the vessel. The spout is paralleled by examples from the moat at Cardiff Castle (Lewis 1991, 4, fig 8A)and an unprovenanced example (Bailey 1997, 57-58 no 5).
Created on: Monday 7th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-989632
Object type: VESSEL
Broad period: ROMAN
County: Newport
Workflow stage: Published
Possible fragment from a vessel mount, possibly originating from an organic vessel, the contextual placing of the find may suggest a Roman date for the find. The mount has an expanded rim with a series of transverse ridges over the top. The rim has a slight plain inturn, before a low moulding defining a decorative panel consisting of a moulded vertical line, which meets a pair of moulded diagonal lines at the top. There is no obvious means of attachment. The rear of the piece is plain.
Created on: Monday 7th July 2003
Last updated: Tuesday 22nd July 2014
Spatial data recorded.

Record ID: NMGW-996D16
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Published
Foot from a small cooking vessel, possibly a small cauldron or skillet. The foot has a flat back and rounded front with a rounded expanded base. The piece is covered in a black carbon deposit, as would be expected in a cooking vessel.
Created on: Monday 7th July 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: NMGW-AC4736
Object type: VESSEL
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Published
Substantial cast copper alloy leg from a cauldron or skillet. The front of the leg has an expanded foot and a prominent central rib. The rear of the leg is plain with tapered edges. The fragment appears broken at both ends, with the base of the foot absent as well as the body of the vessel. The leg is covered in a black carbon deposit, as wood be expected in a cooking vessel.
Created on: Tuesday 8th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-AC8824
Object type: VESSEL
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Published
Cast copper alloy leg, probably from a skillet or small cauldron of Medieval or Post Medieval date. The leg has a 'D' shaped cross-section. There is a prominent horizontal moulding on the front of the leg. The sides taper gently towards the foot. The leg has an ancient break at the top with no surviving evidence for the body of the vessel. The base of the foot has evidence of wear.
Created on: Tuesday 8th July 2003
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: NMGW-C3C0B6
Object type: VESSEL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast foot, probably from a cauldron, skillet or similar of Late Medieval or Post Medieval date. The foot has an irregular cast underside. The foot is expanded and has three claw-like projections. The leg gradually diverges and has a D-shaped cross section with an additional high prominent rib on the wider face. The top of the leg is broken.
Created on: Wednesday 9th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-4070A6
Object type: VESSEL
Broad period: UNKNOWN
County: Monmouthshire
Workflow stage: Published
Fragment of a cast vessel handle or mount. The mount has two drilled attachment holes either side of a gently curved end. The beginning of the possible handle is defined by a low moulding present only on the upper area of the fragment. The handle has a ‘D’ shaped cross section, which becomes narrower as it approaches the broken end.
Created on: Tuesday 15th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-66AD06
Object type: VESSEL
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy vessel escutcheon or mount in the form of a bird’s head. The escutcheon has a lower flat panel representing the breast of the bird and decorated with incised diagonal lines meeting at a central vertical line, beneath each of the diagonal lines are a row of chevrons to indicate the feathers. At the top of the panel is a circular drilled hole, possibly to hold a handle. The top of the perforation corresponds to the level of a step in the mount, presumably to house the vessel rim. The top of the mount is in the form of a pointed bird’s head with incised oval-shaped e…
Created on: Thursday 17th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-66C5E5
Object type: VESSEL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Rim fragment of a vessel, probably of Late Medieval date. The fragment is relatively thin and is suggestive of a vessel with a comparatively small rim diameter (originally approximately 70mm), possibly suggesting a fragment from a jug or tankard, similar to a mid 14th century tankard found at Caerphilly Castle (Lewis, 1978). The vessel has an incised or turned decorative band on the exterior, at the position of slight shoulder, two narrower incised lines flank the band.
Created on: Thursday 17th July 2003
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NMGW-D53460
Object type: VESSEL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published
Copper-alloy leg from a medieval or post-medieval cooking vessel, perhaps a cauldron or skillet. This is a short rectangular-sectioned leg with a bevelled base resulting in the bottom of the leg forming a narrow edge. The leg has broken at the junction with the body of the vessel, and rises to become expanded, with a concave upper surface. The patina and corrosion of the fragment suggests burning, as would be expected with a cooking vessel.
Created on: Tuesday 22nd July 2003
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NMGW-0EFAA4
Object type: VESSEL
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Published
Copper alloy zoomorphic mount, probably from a vessel handle or lid and of Early Roman date. The mount depicts a sitting quadruped with its front legs extending out in front of the body, and possibly representing a bear or a dog. The animal is naturalistic in style. The hair is depicted by incised lines over the body, except for the top of the back, where a rectangular panel is decorated with two incised diagonal crosses divided by a single incised line. On the rear of the animal there is an integral flat circular perforated lug covered with iron corrosion, and possibly representing a …
Created on: Monday 18th August 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-72FDF0
Object type: VESSEL
Broad period: IRON AGE
County: Wrexham
Workflow stage: Published
Near complete copper alloy escutcheon from a hanging bowl or bucket, probably of Late Iron Age date, C. 50 BC to 100 AD. The escutcheon body is of globular form with an integral large incomplete loop, presumably to secure a handle. The body of the mount appears slightly domed, and is decorated with a motif consisting of two high raised moulded opposed semicircular arcs, with a slight break in-between the two. Beneath the raised motif is a circular attachment hole, placed off centre and surrounded with iron corrosion. It is possible to suggest this means of attachment is a secondary re…
Created on: Tuesday 16th September 2003
Last updated: Tuesday 2nd April 2019
Spatial data recorded.

Record ID: NMGW-746D03
Object type: VESSEL
Broad period: MEDIEVAL
County: Powys
Workflow stage: Published
Cast copper alloy ewer or laver spout of late Medieval date, probably dating from the 15-16th centuries. The spout is shaped in the form of a duck's head. Many ewer spouts are in the form of dog's heads such as the example recovered from Cardiff Castle (Lewis 1991, 4, fig. 8A), although duck head spouts have been recorded. The duck eyes are defined by an incised circular ring, the bill is open with a protruding short barrel emerging from the animal's mouth. The top of the animal's head is decorated with short incised lines at the centre and above the brows.
Created on: Friday 28th November 2003
Last updated: Monday 11th February 2019
No spatial data available.

Record ID: NMGW-A60BD5
Object type: VESSEL
Broad period: BRONZE AGE
County: Wiltshire
Workflow stage: Published
Curved cast bronze fragment, possibly a strap handle from a later prehistoric cauldron or metal vessel. The strap fragment has a little of the attachment plate surviving before two wide and rounded ribs. The strap is curved and would have secured the circular ring handle. Similar fittings can be found on the Llyn Fawr cauldrons and other sheet metal vessels from the Later Prehistoric period.
Created on: Wednesday 11th February 2004
Last updated: Monday 25th March 2019
Spatial data recorded.

Record ID: NMGW-F4A3F6
Object type: VESSEL
Broad period: ROMAN
County: Newport
Workflow stage: Published
Cast copper alloy mount in the form a small figurine of a banqueter of Roman date, probably from the 1st century AD. The figure is eroded with the original surface now missing. The figurine depicts a reclining banqueter resting on the left elbow. The figure appears to be naked above the waist. The lower part of the body and legs are covered with draperies, the folds of which are indicated by cast and recessed lines on the front and rear. The hand is visible against the base of drape. The rear of the figure may have further drapery over the left shoulder. No detail of the face or the re…
Created on: Wednesday 10th March 2004
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-E229B3
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation
Copper alloy cast cauldron or skillet leg fragment, broken at both ends, and probably of late Medieval or Post Medieval date. The leg is of low D-shaped section with a rounded rib on the outside face. The sides converge towards the foot and the leg thickens near the top break. Black deposits over the surface indicate heavy sooting and burning.
Created on: Tuesday 27th April 2004
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NMGW-E23887
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation
Copper alloy cast cauldron or skillet leg fragment, broken at both ends, and probably of late Medieval or Post Medieval date. The leg is of trapezoidal section with a sharp rib on the outside face. The sides are parallel. Black deposits over the surface indicate heavy sooting and burning.
Created on: Tuesday 27th April 2004
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NMGW-8E4D47
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation
Post medieval copper alloy cooking vessel handle fragment from a posnet or skillet of 16th to 17th century date The fragment is the handle terminal from a cooking vessel (with a surviving length of 77.4mm and a weight of 156.5g). The handle is of D-shaped section at the break (with a width of 28.6mm and a thickness of 12.4mm) with straight and near-parallel sides before the terminal. The handle has a rounded step down to the terminal (10.4mm deep and giving an overall depth of 20.3mm), which has a rounded end. The body of the handle has a grooved border each side and a central deco…
Created on: Tuesday 4th November 2014
Last updated: Tuesday 4th November 2014
Spatial data recorded.

Record ID: NMGW-6337A6
Object type: VESSEL
Broad period: ROMAN
County: Carmarthenshire
Workflow stage: Awaiting validation
Copper alloy vessel mount of uncertain date, possibly Roman The mount is of looped form, probably representing the inner part of a hinge (with an overall length of 41.9mm and a weight of 13.6g). The attachment plate is of elongated lozenge form (with a length of 35.3mm, a width of 14.7mm and a thickness of 2.5mm - 3.7mm), which is slightly wedged, thinnest opposite the hinge. The mount was attached to the vessel by a single iron rivet, which is partially preserved (giving a surviving depth of 6.3mm). The opposite face has carefully bevelled edges and the iron rivet does not appear …
Created on: Friday 14th November 2014
Last updated: Friday 14th November 2014
Spatial data recorded.

Record ID: NMGW-1F6A1C
Object type: VESSEL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Late Medieval to early Post-Medieval copper alloy chafing dish handle of 15th to 17th century date. The handle is complete and of bifurcating form, with a stud for attachment to the dish (with an overall length of 62.3mm and weighing 42.7g). The looped handle (49.4mm long, 58.2mm wide at bifurcated end and 24.8mm wide at the attachment end) is of hexagonally faceted section (between 3.9mm and 5.1mm thick and between 4.6mm and 6mm wide). The attachment lug (22.6mm long) is of rectangular section (with a maximum width of 15.6mm and thickness of 9.0mm) with rounded sides, expanding …
Created on: Wednesday 4th February 2015
Last updated: Tuesday 13th October 2015
Spatial data recorded.

Record ID: NMGW-35AEB8
Object type: VESSEL
Broad period: IRON AGE
County: Denbighshire
Workflow stage: Published
Late Iron Age or Roman copper alloy zoomorphic mount, probably from a vessel The mount appears to be complete or near-complete (with an overall length of 58.7mm and a weight of 47.4g) and depicts a beast, probably a dog but possibly a pig cast in the round. The beast's snout is concave and would appear to be too elongated for a pig. The end of the snout appears to have two circular depressions depicting the nostrils. The mouth of the beast is biting on a piece of ferrous plate on one side, possibly the rim of a vessel. The plate does not extend to the opposite side. The eyes are …
Created on: Tuesday 17th February 2015
Last updated: Sunday 12th June 2016
Spatial data recorded.

Record ID: NMGW-5C70E8
Object type: VESSEL
Broad period: ROMAN
County: Powys
Workflow stage: Awaiting validation
Probable Roman copper alloy jug lid of 1st to 4th century AD date The cast lid is fragmentary and with only a very short length of original edge surviving (with a surviving length of 36.7mm, a surviving width of 32.4mm and a weight of 16.0g). The plate lid is thinnest around the edge (with a thickness of 1.3mm) and has a cast raised circular boss (of 22.3mm diameter, where the lid has a thickness of 3.0mm – 3.5mm). At the centre of the circle is an integral circular-sectioned handle lug (10.1mm diameter at its base, 11.9mm high and with an overall depth of 14.9mm). The top face…
Created on: Monday 18th January 2021
Last updated: Monday 18th January 2021
Spatial data recorded.

Record ID: NMGW-5C8955
Object type: VESSEL
Broad period: ROMAN
County: Powys
Workflow stage: Awaiting validation
Roman copper alloy vessel handle from a jug, probably of 1st to 3rd century AD date The handle is fragmentary, missing the handle grip (with a surviving length of 37.0mm and a weight of 18.2g). The handle was originally fitted with a lid, hinged between twin open lugs on the upper part of the handle, now damaged (with a width of 11.1mm, an opening 4mm wide and a height of 7.2mm). Beneath the hinge are two curved arms, now damaged and truncated (with a surviving width of 23.9mm). The arms would have been soldered to the rim of the vessel (suggesting a rim diameter of approximately…
Created on: Monday 18th January 2021
Last updated: Monday 18th January 2021
Spatial data recorded.

Record ID: NMGW-EA5EA7
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation
Medieval copper alloy ewer spout of 14th or 15th century date The cast spout is fragmentary, represented by the zoomorphic end of the spout in the form of the head of a water bird, probably a duck (with a length of 41.8mm and a height of 24.2mm and a weight of 22.0g, including sediment). The neck has broken below the head and is sub-circular sectioned (with an external diameter of 11.1mm – 11.9mm and internal diameter of 7.0mm). The fragmentary spout is widens and deepest at the head (with a width of 14.2mm and a depth of 16.8mm). The bird is depicted with short incised marks c…
Created on: Monday 25th January 2021
Last updated: Monday 25th January 2021
Spatial data recorded.

Record ID: NMGW-AE04A7
Object type: VESSEL
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Post medieval copper alloy cooking vessel handle from a posnet or skillet of 16th to 17th century date The cast handle is from a cooking vessel and is near-complete, eroded at the terminal and includes a fragment of the vessel rim (with an overall length of 183mm and a weight of 240.8g). The handle is of D-shaped section with straight sides converging towards the terminal (with a width of 13mm – 32.0mm and a thickness of 6.1mm - 10.6mm). The top of the handle is decorated with a grooved border and there is the suggestion of applied decoration on the interior but the detail is n…
Created on: Wednesday 3rd February 2021
Last updated: Wednesday 3rd February 2021
Spatial data recorded.

Record ID: NMGW-68BFB7
Object type: VESSEL
Broad period: IRON AGE
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Iron Age copper alloy zoomorphic vessel mount or cup handle of 1st or 2nd century AD date The mount depicts a bird, probably a goose and is incomplete, broken at one end (with a surviving length of 28.5mm, a surviving depth of 23.0mm and a weight of 17.5g). The terminal of the mount is in the form of a bird’s head, with a protruding pointed beak of subtriangular section (3.6mm long). The start of the beak was defined by grooves, now corroded. The head of the goose is globular (with a maximum diameter of 11.5mm) and the eyes are inset with bright blue glass spherical beads (of 1…
Created on: Friday 12th February 2021
Last updated: Friday 12th February 2021
Spatial data recorded.

Record ID: NMGW-3DADB6
Object type: VESSEL
Broad period: ROMAN
County: Monmouthshire
Workflow stage: Awaiting validation
Copper alloy vessel handle, possibly from a jug of Roman date The handle is complete (with a length of 68.3mm, a depth of 19mm and a weight of 35.7g) but no part of the container vessel survives. The handle is of S-shaped form and has flattened attachment points on each end. The upper, oval attachment point (14.5mm long x 9.4m m wide) has an outward angle, whereas the lower, sub-triangular attachment point (12.5mm long x 12.5m m wide) is near-vertical. The handle is of oval section, widening to its furthest point (where it has a width and thickness of 12.5mm and 9.9mm respective…
Created on: Monday 22nd February 2021
Last updated: Monday 22nd February 2021
Spatial data recorded.