Back to simple search | Back to advanced search

    You searched for:

    • Institution: NMGW
    • Direction: desc
    • Sort: objectType
    • Primary material: Copper alloy
    • Show this many records per page: 40

  • Thumbnail image of NMGW-E7E1C2

Record ID: NMGW-E7E1C2
Object type: WINGED AXEHEAD
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Published Find published
Late Bronze Age bronze end-winged axe, belonging to the Carp's Tongue complex of Ewart Park metalworking, corresponding to Needham's (1996) Period 7 and dated to c. 950-750BC. The winged axe is incomplete, missing both wings on the unlooped side (the axe has an overall length of 1360.9mm and a weight of 282.8g). The butt protrudes beyond the return of the wings (by 14mm) and expands to the end (with a width of 22.4mm and a thickness of 6.1mm). The end of the butt has two 'horns' each side of a central rectangular break, which would have been attached to the casting jet before remov…
Created on: Tuesday 8th December 2009
Last updated: Wednesday 13th September 2017
Spatial data recorded.


  • Image not taken

Record ID: NMGW3342
Object type: WEIGHT
Broad period: MEDIEVAL
County: Bridgend
Workflow stage: Published Find published
Copper alloy trade weight. Mark: crowned h = Henry VII or VIII 1485-1509 (-1547). Reverse has been machined. Originally a one-ounce weight? Weight 24.70 grams.
Created on: Friday 26th October 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW3296
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Published Find published
James I weight for double crown of 2nd coinage, revalued from 1612 at 11s cf. Withers 506. Weight 3.642 grams.
Created on: Friday 21st September 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW3312
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Monmouthshire
Workflow stage: Published Find published
Cast copper alloy flat circular trade weight (1/8oz) marked by two or three indistinct marks. Either sixteenth or seventeenth century.
Created on: Monday 24th September 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW336
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Newport
Workflow stage: Published Find published
Cast copper alloy square weight. Both sides stamped with the same design: two Maltese-like crosses, one in the top left and the other in the top right corner, and a central, Roman capital, letter 'C'. Dimensions 19mmx19mmx11mm, weight 27.85 grams. The weight does not closely resemble any of the known British coin weights and was probably used for a purpose other than checking coins. Its current weight is just under an ounce. It is probably post-medieval in date.
Created on: Tuesday 10th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW356
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Monmouthshire
Workflow stage: Published Find published
Copper alloy (probably brass) cylindrical weight with a copper alloy (probably brass) suspension loop. The base of the weight is apparently filled with a lead, or lead alloy, plug. The top of the weight and the suspension loop are encrusted with concreted estuarine deposits. Possibly for use with a steelyard. Twentieth century. Height 41mm.
Created on: Wednesday 18th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW-9B50A8
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published Find published
Trade weight - 1 ounce, Avoir dupois, actual current weight - 26.19g; from the time of James II, 1685-89
Created on: Wednesday 25th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW-FD2716
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Rhondda Cynon Taf
Workflow stage: Published Find published
Trade weight, Originally weighing 1 ounce. Punched marks of a crowned I, a sword and an ewer, indicating the time of James I.
Created on: Wednesday 29th October 2003
Last updated: Thursday 24th February 2011
No spatial data available.


  • Image not taken

Record ID: NMGW-F1E9A6
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Cardiff
Workflow stage: Published Find published
Probably originally half-ounce, with marks: crowned EL (Elizabeth I) Sword and ewer (London)
Created on: Thursday 5th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NMGW-4B2431

Record ID: NMGW-4B2431
Object type: WEIGHT
Broad period: MEDIEVAL
County: Hertfordshire
Workflow stage: Published Find published
Copper alloy zoomorphic figurine, probably a weight in the form of a horse, now damaged and incomplete, represented by the front of the animal (with a surviving length of 32.5mm, a maximum surviving height of 22.1mm and a weight of 20.4g). The legs of the horse survive as short stubs and are projecting forward, suggesting the horse may have been depicted running. The figurine has a maximum width across the shoulders of 10.0mm. The mane is evident along the neck of the horse and the recessed eyes are discernible but all other surface detail has been lost. The find can be closely para…
Created on: Tuesday 15th April 2008
Last updated: Wednesday 7th September 2011
No spatial data available.


  • Thumbnail image of NMGW-7B8868

Record ID: NMGW-7B8868
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy trade weight Half-ounce weight, probably with a crowned G (George I-II) English, 18th century Now 11.39g
Created on: Thursday 15th January 2015
Last updated: Thursday 15th January 2015
Spatial data recorded.


  • Thumbnail image of NMGW-34BD83

Record ID: NMGW-34BD83
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy trade weight With a crowned 'C' for Charles I (1625-49) or II (1660-85); sword for London Probably originally a 2-ounce weight 46.42g, corroded
Created on: Monday 24th November 2014
Last updated: Monday 24th November 2014
Spatial data recorded.


  • Thumbnail image of NMGW-48EC34

Record ID: NMGW-48EC34
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy trade weight Charles I / II (1625-49 / 1660-85), indicated by a crowned-C, Sword and ewer for the London marks, possibly a worn 'A' at the centre for 'avoirdupois' 6.0g approximately equal to quarter-ounce weight avoirdupois (correct weight, pre-corrosion = 7.1g)
Created on: Tuesday 25th November 2014
Last updated: Tuesday 25th November 2014
Spatial data recorded.


  • Thumbnail image of NMGW-217893

Record ID: NMGW-217893
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy trade weight of 17th century date. The quarter ounce trade weight is complete, with a few damaged edges, measuring 19.5mm in diameter, 3.4mm in thickness and weighing 6.05g. The raised edge around the stamped inner area is 2mm wide and 0.6mm high. The weight is stamped with a sword (the City of London Guildhall mark) a ewer (the London Founder's Company mark) and a crowned 'C' which would indicate it was issued during either the reign of Charles I (1625-1649) or Charles II (1660-1685).
Created on: Wednesday 4th February 2015
Last updated: Wednesday 4th February 2015
Spatial data recorded.


  • Thumbnail image of NMGW-063EB0

Record ID: NMGW-063EB0
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Pembrokeshire
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy trade weight, probably of late 17th century date The weight is stamped with a crowned W, probably over the letter M, probably for William III and Mary II (1689 -1694), a sword and ewer indicating London. The weight now weighs 25.3g, equivalent to 0.8924 ounces and would originally have been a one-ounce weight. The surface is worn and has a mid to dark green patina.
Created on: Friday 27th February 2015
Last updated: Friday 27th February 2015
Spatial data recorded.


  • Thumbnail image of NMGW-4965C9

Record ID: NMGW-4965C9
Object type: WEIGHT
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy pan-weight of uncertain date The weight is circular and is rectangular sectioned (with a diameter of 15.5mm and a thickness of 3.3mm). The face is decorated a concentric ring and inner depression, possibly turned. The reverse is flat and has three punched indentations, possibly in a triangular arrangement. The surface has a mid-green patina with file marks evident on the underside. The weight now weighs 2.92g, equivalent to 0.103 ounce and it is possible that the weight was a one-eighth ounce weight under the Mercantile, Avoirdupois or Tower systems (equivalent to 3…
Created on: Monday 2nd March 2015
Last updated: Monday 2nd March 2015
Spatial data recorded.


  • Thumbnail image of NMGW-F321C8

Record ID: NMGW-F321C8
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy trade weight of mid-17th to early 18th century date The weight is stamped with a crowned W, probably for William III, a sword and ewer for London. The weight now weighs 12.0g, equivalent to 0.4232 ounces and would originally have been a half-ounce weight. There is comparatively large void within the weight from a casting flaw. The surface has a mid to dark green patina.
Created on: Thursday 26th February 2015
Last updated: Thursday 26th February 2015
Spatial data recorded.


  • Image not taken

Record ID: NMGW-482F6E
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval English copper alloy trade weight London, Elizabeth I (1590-1603), probably originally a quarter-ounce weight 5.22g
Created on: Wednesday 18th February 2015
Last updated: Wednesday 18th February 2015
Spatial data recorded.


  • Thumbnail image of NMGW-09EBFB

Record ID: NMGW-09EBFB
Object type: WATCH
Broad period: POST MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy toy watch face of later 18th or 19th century date The toy watch is fragmentary, represented by the circular face only (with a diameter of 40.5mm, a thickness of 0.5mm and a weight of 7.6g). There is a stub from the integral loop at the apex. The edge has a pressed border (1.4mm deep) decorated with stamped scrolls. The face has pellets around the edge to represent minutes or seconds. The numbers are Roman Numerals within circular borders. The stamped hands are depicted as two interweaving strands and read just gone twenty-five past ten, or 10:27. The centra…
Created on: Tuesday 3rd February 2015
Last updated: Tuesday 3rd February 2015
Spatial data recorded.


  • Image not taken

Record ID: NMGW138
Object type: VESSEL
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Published Find published
Fragment of crude vessel foot made from cast leaded copper alloy, plano-convex section. Maximum width 41mm, surviving height 31mm.
Created on: Friday 10th September 1999
Last updated: Wednesday 17th June 2015
Spatial data recorded. This findspot is known as 'Near Chippenham, Wiltshire', grid reference and parish protected.


  • Image not taken

Record ID: NMGW3215
Object type: VESSEL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published Find published
Pot mend of a steeply sided vessel, crudely cast. Unusual metal type - microscopic examination suggests that it is a heavily leaded copper alloy which may have a tinned surface. Most pot mends are made from straight lead alloys and that this example has been made from a leaded copper alloy suggests that it may be a mend for a copper alloy vessel rather than a ceramic pot. Close dating is not possible but a medieval or post-medieval date is most likely. Dimensions 100m x 44mm x 4-8mm.
Created on: Monday 18th June 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW3166
Object type: VESSEL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published Find published
Cast copper alloy vessel foot. The foot has a rib on its external surface and tapers to a rounded point. The upper part of the casting is missing. Vessel feet are not uncommon detector finds (Bailey 1997, 36). Although examples which terminate in turned-out bases or paws are the most common type, examples with rounded tips are not unknown. Surviving length 79mm, max width (surviving) 35mm, max surviving thickness 16mm. Fifteenth to seventeenth century probably [i.e. Late Medieval - Early Post-Medieval]. Parallels: Lewis 1978, 36, no.45 (skillet); and Lewis 1978, 32, no.38 (Cauldron)
Created on: Tuesday 29th May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW3100
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published Find published
Crudely cast, slightly waisted, copper alloy vessel leg. Length 41mm, width 28-33mm, thickness 18mm, weight 77.4 grams. Identifying the vessel type that this leg is from is not possible. Presumably it was either a cauldron, skillet, jug or ewer. Close dating is equally difficult as the form of the legs like this did not change from the medieval period until the seventeenth century (Read 1995, 95).
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW3101
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published Find published
Several cast copper alloy vessel fragments including the basal end of two vessel legs form different vessels but both plano-convex in section and with decorative outer longitudinal ribs; cast copper alloy rim fragments from four different wide and steep sided vessels (probably cauldrons); and a cast copper alloy rim fragment from a wide and steep sided vessel which includes an integrally cast suspension loop, the upper part of which contains a pronounced wear facet.
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW3105
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published Find published
Complete cast copper alloy vessel leg. Part of the apparently integrally cast body of the vessel remains attached to the leg. Length 78mm, width 16-17 mm, weight 115.2 grams. Medieval to post-medieval. The surface of the leg is preferentially blackened in comparison to the inside of the vessel body; this "sooting" is a common phenomena and is due to oxidisation of the outer surface of the vessel through exposure to the cooking fire.
Created on: Tuesday 1st May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW3108
Object type: VESSEL
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published Find published
Cast copper alloy rim fragment from a wide and steep sided vessel (probably a cauldron). Surviving vessel depth 37mm, thickness 3.5-4.5mm, weight 42.1 grams. Medieval or post-medieval in date. Medieval cast copper alloy vessels are discussed by Egan (1998, 161-169); several post-medieval examples are noted by Margeson (1993, 90-94).
Created on: Tuesday 1st May 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW3291
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Published Find published
Cast copper alloy vessel leg, sub-triangular in section, which tapers towards its angled foot. The foot is separated from the main part of the leg by a transverse ridge in the angle. The weight of the vessel leg suggests that the copper alloy was leaded. Possibly the leg of a tripod ewer. Close dating is difficult because the form of the vessel legs remained similar from the late medieval period until the seventeenth century (Read 1995, 95); however, the distinctive transverse ridge in the angle of the foot and leg of this example is closely paralleled by a vessel leg recovered from a …
Created on: Friday 21st September 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW3394
Object type: VESSEL
Broad period: MEDIEVAL
County: Blaenau Gwent
Workflow stage: Published Find published
Cast copper alloy vessel, leg, sub-trapezoidal in section. The outer edge and sides are decorated with longitudinal grooves. The leg tapers towards its rounded base. The weight of the vessel leg suggests that the copper alloy was leaded. Probably the leg of either a cauldron, skillet, jug or ewer. Close dating is not possible because the form of vessel legs remained similar from the late medieval period until the seventeenth century (Read 1995, 95). Length 46.5mm, maximum width 31.5mm, maximum thickness 20mm. Thirteenth to seventeenth century.
Created on: Thursday 8th November 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW390
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Published Find published
Cast copper alloy rim fragment from a steep-sided vessel. The large diameter of the vessel suggests that it was used for cooking. Minimum depth of vessel 26mm, thickness 4mm. Probably medieval or post-medieval in date.
Created on: Wednesday 25th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: NMGW393
Object type: VESSEL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published Find published
Wall fragment of a cast copper alloy vessel with horizontal ridge. Unfortunately, the fragment is not large enough to determine the original form of the vessel with certainty but it is possibly from a tripod cauldron or skillet. Dimensions 64mm x 51mm, thickness 2.5mm, weight 34.1 grams. Medieval or Post-medieval in date.
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NMGW-097C90

Record ID: NMGW-097C90
Object type: VESSEL
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy vessel escutcheon and handle, probably of Roman period date. The handle comprises a looped escutcheon attached to the lower part of a handle. The rear or inside of the escutcheon has a rectangular plate (44.54 x 46.6mm) with a trapezoidal knop at the base (14.2mm long and 13.92mm wide). There are three perforations (of 3mm diameter) at the base of the escutcheon, two at the corners and one irregularly placed within the knop. The interior of the escutcheon has a shield-shaped or sub-triangular silvered mark (29.3mm high and 30.5mm wide), presumably as a result of a lost dec…
Created on: Tuesday 8th November 2005
Last updated: Thursday 24th February 2011
No spatial data available.


  • Thumbnail image of NMGW-F4A3F6

Record ID: NMGW-F4A3F6
Object type: VESSEL
Broad period: ROMAN
County: Newport
Workflow stage: Published Find published
Cast copper alloy mount in the form a small figurine of a banqueter of Roman date, probably from the 1st century AD. The figure is eroded with the original surface now missing. The figurine depicts a reclining banqueter resting on the left elbow. The figure appears to be naked above the waist. The lower part of the body and legs are covered with draperies, the folds of which are indicated by cast and recessed lines on the front and rear. The hand is visible against the base of drape. The rear of the figure may have further drapery over the left shoulder. No detail of the face or the re…
Created on: Wednesday 10th March 2004
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NMGW-E229B3

Record ID: NMGW-E229B3
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy cast cauldron or skillet leg fragment, broken at both ends, and probably of late Medieval or Post Medieval date. The leg is of low D-shaped section with a rounded rib on the outside face. The sides converge towards the foot and the leg thickens near the top break. Black deposits over the surface indicate heavy sooting and burning.
Created on: Tuesday 27th April 2004
Last updated: Thursday 24th February 2011
No spatial data available.


  • Thumbnail image of NMGW-E23887

Record ID: NMGW-E23887
Object type: VESSEL
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy cast cauldron or skillet leg fragment, broken at both ends, and probably of late Medieval or Post Medieval date. The leg is of trapezoidal section with a sharp rib on the outside face. The sides are parallel. Black deposits over the surface indicate heavy sooting and burning.
Created on: Tuesday 27th April 2004
Last updated: Thursday 24th February 2011
No spatial data available.


  • Thumbnail image of NMGW-0EFAA4

Record ID: NMGW-0EFAA4
Object type: VESSEL
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Published Find published
Copper alloy zoomorphic mount, probably from a vessel handle or lid and of Early Roman date. The mount depicts a sitting quadruped with its front legs extending out in front of the body, and possibly representing a bear or a dog. The animal is naturalistic in style. The hair is depicted by incised lines over the body, except for the top of the back, where a rectangular panel is decorated with two incised diagonal crosses divided by a single incised line. On the rear of the animal there is an integral flat circular perforated lug covered with iron corrosion, and possibly representing a …
Created on: Monday 18th August 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NMGW-C46CB4

Record ID: NMGW-C46CB4
Object type: VESSEL
Broad period: ROMAN
County: Wiltshire
Workflow stage: Published Find published
Roman copper alloy vessel handle The handle is incomplete and is broken at one end, with a surviving length of 76.2mm and has a weight of 77.0g. The handle is deeply curved and is of lozenge section, with a thickness at the break of 9.1mm and a width of 7.4mm. At the top of the handle are zoomorphic figures, comprising a bird and horse. The seated bird, probably a duck, has a length of 37.0mm, a maximum width of 13.4mm and a height of 21.9mm. The feathers of the bird are depicted with transverse lines, forming chevrons at the rear. The horse is depicted on its back and is only represe…
Created on: Thursday 15th November 2007
Last updated: Tuesday 13th October 2015
Spatial data recorded.


  • Thumbnail image of NMGW-C1B167

Record ID: NMGW-C1B167
Object type: VESSEL
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy vessel or furniture leg The leg is complete and has a length of 64.3mm and a weight of 15.7g. The top of the leg has an L-shaped bracket (with a length of 11.2mm and a width of 5.3mm) to support a vessel above. Remnants of a white adhesive or solder are discernible on the surfaces of the bracket. The leg is of sub-lozenge section and has an undulating curve to the foot. The front of the leg is enhanced with moulded projections near the top and incised grooves around the mid-section. At the rear of the mid-section is an incomplete loop (7.8mm diameter), the interior …
Created on: Thursday 15th November 2007
Last updated: Monday 27th June 2011
Spatial data recorded.


  • Thumbnail image of NMGW-C4CF26

Record ID: NMGW-C4CF26
Object type: VESSEL
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy inscribed plate, probably of Roman period date The plate is fragmentary and has a surviving length of 27.5mm surviving height of 20.9mm and a weight of 6.9g. The plate has a thickness of 2.5-2.8mm. The base of the fragment has an original edge, while the other edges are broken. The plate is curved across both its length and height. On the front of the plate is deeply incised lettering and decoration. The letter R is discernible after a ring-and –dot motif. Both appear to be within a double curved border outside of which is a hatched design. The plate has broken along th…
Created on: Thursday 15th November 2007
Last updated: Friday 17th January 2014
Spatial data recorded.


  • Image not taken

Record ID: NMGW-6DF594
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Published Find published
Rim fragment of a cast cooking vessel, probably of Medieval date. The exterior of the fragment is rain decorated, the interior is plain with a slight rounded mouth moulding. There is a crack running from one of the sides to the rim. All breaks are rounded and are of some age.
Created on: Monday 23rd June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NMGW-6E3415

Record ID: NMGW-6E3415
Object type: VESSEL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Published Find published
Rim fragment of a cast cooking vessel, probably of Medieval date. The exterior of the fragment is rain decorated, the interior is plain with a slight rounded mouth moulding. There is a crack running from one of the sides to the rim. All breaks are rounded and are of some age.
Created on: Monday 23rd June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 2,075
Search server index: valhalla

You are viewing records: 1 - 40.

Search statistics

  • Total quantity: 8,194
  • Mean quantity: 3.949
  • Maximum: 3,547

Filter your search

1 - 40 of 2,075 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.