Record ID: NMGW-A3B6C7
Object type: BUCKLE
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Published
Roman copper alloy buckle probably of 2nd to 3rd century date The buckle frame is complete but the pin is missing (with a length of 32.8mm and a weight of 5.7g). The strap was attached around a rectangular slot (16.4m long and 8.2mm wide, 11.0mm x 3.2mm internal) at the rear of the buckle of rectangular section (2.0mm thick). The buckle has a minimum width (of 11.5mm) before expanding to the curved outside edge (with a maximum width of 26.5mm). The frame is of sub-triangular section (3.0m thick) and has a decorative C-scroll in the interior, flanking either side of the bar. The bar…
Created on: Friday 11th March 2011
Last updated: Friday 18th May 2012
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW3283
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy single loop D-shaped buckle with a frame embellished with an ornate outer edge, and a narrowed and offset strap bar. The outer edge of the frame has a notched lip flanked on either side by a pair of transverse knops. Egan and Pritchard have published a close parallel, recovered from excavations in London, which dates to c.AD1350 to c. AD 1400 (1991, 73, no.297). A broadly comparable date for the St Nicholas buckle is not unreasonable.
Created on: Thursday 13th September 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-FEEDE7
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast buckle with an elaborate scallop lip an projections at the bar terminals. The frame has a bevelled outer edge and flat underside. The bar has a circular cross section with the pin still attached. The pin has a D shaped cross-section and tapers along its length to the point. The buckle is slightly concave in profile, possibly because of recent distortion.
Created on: Wednesday 30th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-FF3C75
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Decorative frame with the bar offset and narrowed and slight mouldings at the bar terminals. The frame has a D shaped cross section and expands towards the outside edge of the frame. The pin survives and is a simple piece of flat copper alloy tapering to a point with a single transverse ridge near the loop.
Created on: Wednesday 30th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-499672
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Incomplete cast small buckle with an integral plate, which has broken across a rivet hole. The buckle has a hole to house the missing pin. The sides of the frame are chamfered, while the outside edge is flat and expanded. There are two decorative projections either side of the plate. The surface has corroded.
Created on: Monday 9th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-D7DE05
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast oval frame buckle with offset and narrowed bar of Medieval date (c.1200-c.1400). The outer edge of the buckle is expanded and has a sub-triangular cross-section with a flat reverse. The bar is of D-shaped cross-section and the pin is now absent.
Created on: Monday 16th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-30F076
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy single loop buckle with a plain circular frame, probably dating from 14th to the early 15th century (Ottaway & Rogers 2002, 2886). There has been confusion in categorising annular brooches and annular buckles, Egan’s (in Egan & Pritchard 1991, 64-5) definition of brooch frames having a constriction or a hole for the pin, would result in this example being categorised as a buckle. The frame is slightly oval, possibly as a result of distortion and is circular in cross-section. The pin is still attached and has an open loop around the frame. The pin is ‘D’ shaped …
Created on: Friday 20th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-ACB861
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy buckle with a simple D-shaped frame and probably dating to between 1350 and 1500. Both faces of the buckle are flat with rounded edges. The outside of the edge expands to a slight point at the pin notch. The bar is narrowed and the pin is missing.
Created on: Tuesday 8th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-ADB978
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy oval frame buckle, with a composite rigid plate, probably dating between 1350 and 1450. The plates and pin are missing. The buckle has a prominent lip with a low notch. The frame has a D shaped profile and the bar is narrowed. The forked spacer is damaged and is missing the terminals. There is a low step on the front and rear faces of the spacer, marking the position of the beginning of the plate.
Created on: Tuesday 8th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-ADCBD3
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy buckle with a circular and simple frame and central bar probably dating between 1450-1650. This buckle may be a large example of a shoe buckle. The frame is plain with a rounded profile and steep internal sides. The bar has a triangular cross section. The buckle has suffered some distortion but was likely to have had an angled frame. The pin is absent. The brooch has a patchy black coating or patina.
Created on: Tuesday 8th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-ADDE67
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast ornate copper alloy buckle with a double oval frame, probably dating to the from the 17th or 18th century. The frame has scrolled mouldings at the missing iron bar, and further decorative mouldings forming the pin notch. The frame has a rounded upper face with a flat back. The buckle was originally gilded.
Created on: Tuesday 8th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-ADFAE8
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy buckle with an asymmetrical double loop frame, probably dating to the from the 16th to 18th century. The buckle incorporates an oval frame on one side with a rectangular frame the other. The oval side has a D shaped cross section with knops on the outside edge of the frame, and is otherwise plain. The rectangular side, including the bar has a rectangular or trapezoidal cross section and a series of decorative chevron moulding on the outside edge of the frame. The buckle was originally tinned or silvered.
Created on: Tuesday 8th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-AE2B32
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy oval buckle with a simple frame and central bar of iron, now missing, probably of 17th or 18th cetury date. The buckle has a flat back with bevelled sides and has a rounded front face with vertical inner sides. The frame is plain.
Created on: Tuesday 8th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-AE4124
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy sub-rectangular buckle frame of 15th to 17th century date. The frame has a wide pronounced lip with angled sides. The bar is thinned with a central expanded area indicating the position of the missing pin. This area would suggest the buckle had a folded sheet plate, which is now lost. The sides are concave and the outside edge of the frame is rounded.
Created on: Tuesday 8th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-AE6C71
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy single loop buckle frame, probably of Medieval or early Post Medieval date c. 1270 – 1600. The frame is plain apart from the pin notch on one face. The bar is slightly thinned and the outside edge of the frame is slightly expanded. The frame is relatively flat on both faces with rounded sides. There is some iron corrosion on the bar, suggesting the missing pin was made of iron.
Created on: Tuesday 8th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-D22254
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy buckle frame with central bar of Late Medieval date. Buckle consisting of rectangular inside loop, with larger oval outside loop. The moulded bar has a recess to house the now missing pin. The pin notch is evident on the frame. A buckle of the same form has been found in London (Egan & Pritchard 1991) which still retains its leather strap and illustrated the method of attachment via two rivets secured by a bar-mount through a leather strap around the rectangular part of the frame (ibid. p102). The date may be verified from a buckle found on a Late Medieval burial at …
Created on: Tuesday 22nd July 2003
Last updated: Thursday 3rd January 2019
No spatial data available.

Record ID: NMGW-E736C1
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Annular ring of copper alloy. This is likely to be a simple annular or oval buckle frame of Medieval date, probably 13th –15th century. The ring is plain with a simple notch on one face to house the pin. The frame is expanded at the point of the notch. The profile of the frame is generally ‘D’ shaped. It is often difficult to distinguish buckles of this type from simple brooches, and there remains a possibility this item is a plain annular brooch.
Created on: Wednesday 23rd July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-DECF55
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Medieval cast annular buckle or open frame brooch of Medieval date, and probably dating from the late 13th to the mid 15th century. The frame is slightly oval and is relatively substantial for a brooch, but has both a restriction and notch for the pin on either side of the frame. The frame is of sub-triangular section, with a rounded outside edge and near-perpendicular (to the underside) inside edge. The frame has a discernible casting flaw on the inside edge and does not carry any decoration.
Created on: Tuesday 9th March 2004
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-6AC6D2
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Medieval copper alloy buckle, probably of mid 14th to early 15th century date The buckle is of oval framed type with composite rigid plates and is near complete but has lost the two sheet plates and the end of one fork, the pin is also unlikely to be original. The buckle has an overall length of 41.31mm and a maximum width across the frame of 22.59mm. The frame is of quadrangular faceted section with a thickness of 2.87mm. The outside edge of the frame has a pointed lip. The bar is continuous with the inside edge of the frame (not off-set). The position where the plates met the frame…
Created on: Monday 19th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-057904
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Late medieval to Post medieval copper alloy buckle of 14th to 16th century date The buckle frame is of trapezoidal form with a concave outer edge (with a length of 24.7mm, a width at the outside edge of 22.7mm, a width at the bar of 16.1mm and a weight of 4.4g). The frame is of sub-square section (3mm square). The corners of the outside edge are decorated with diagonal grooves. The frame is damaged at the centre of the outside edge, removing any decoration of notch for the pin. The sides of the frame are gently concave and convergent to the sub-circular sectioned bar. The pin is …
Created on: Friday 27th February 2015
Last updated: Friday 27th February 2015
Spatial data recorded.

Record ID: NMGW-38A7D3
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Medieval copper alloy buckle frame of mid 12th to 14th century date The buckle frame is oval with ornate outside edge and is missing the pin (with a length of 16.4mm and a weight of 1.9g). The outside edge is of D-shaped section (3.5mm wide and 2.8mm thick) and decorated with transverse grooves but is without a notch for the pin. The sides are convex (giving the buckle a width of 23.8mm and thickness of 1.9mm) and of faceted section. The bar is narrowed and offset (with a diameter of 1.7mm - 2.0mm). The surface has a dark-green patina.
Created on: Wednesday 12th November 2014
Last updated: Wednesday 12th November 2014
Spatial data recorded.

Record ID: NMGW-6781C5
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Medieval copper alloy buckle of 13th to 15th century date The buckle comprises the oval frame only (with a length of 25.5mm, a width of 30.7mm and a weight of 5.7g). The buckle is of simple form with a consistent rectangular section (2.8mm thick). The outside edge is expanded (to 7.0mm wide) and has a notch for the pin. There is no applied decoration on the frame. The surface has a dark-green patina.
Created on: Wednesday 14th January 2015
Last updated: Wednesday 14th January 2015
Spatial data recorded.

Record ID: NMGW-F8D9A6
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Medieval copper alloy buckle frame of mid 12th to 14th century date The buckle frame is oval with ornate outside edge and is missing the pin (with a length of 15.7mm and a weight of 1.7g). The outside edge is expanded and of sub-rectangular section (4.8mm long, 4.5mm wide and 3.9mm thick) and decorated on the front and rear with fine ribs and grooves. A pair of ribs near the centre and likely to have acted as a notch for the pin. The sides are convex (giving the buckle a width of 16.7mm) and of rectangular section (0.7mm thick and 2.7mm wide). The square-sectioned bar (1.6mm squa…
Created on: Wednesday 21st January 2015
Last updated: Wednesday 21st January 2015
Spatial data recorded.

Record ID: NMGW-F9BEA5
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Medieval copper alloy buckle of mid-14th to mid-15th century date The buckle frame is of D-shaped form and is complete but is missing the pin (with a length of 27.8mm, a width of 26.8mm and a weight of 4.1g). The outside edge has a lip and a notch for the missing pin (with a width of 5.0mm). The frame has a continuous curve to the offset and narrowed bar. The sides are of rounded sub-square section (3mm square) and no applied decoration is evident on the frame. The surface is corroded and pitted with a dark-green patina.
Created on: Wednesday 21st January 2015
Last updated: Wednesday 21st January 2015
Spatial data recorded.

Record ID: NMGW-8A6431
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Medieval copper alloy buckle of oval frame with composite rigid plates, now missing and of mid-14th or 15th century date The buckle is missing the sheet plates, the pin and is distorted (with a distorted length of 37.2mm and a weight of 6.7g). The frame is oval (with a width of 29.2mm) and has a lip with a notch on the outside edge. The frame is of triangular section (with a thickness of 2.6mm) and narrows at the bar, which has broken because of the distortion. Behind the frame, the spacer has rounded ribs on both faces (with a thickness of 4.1mm), which would have abutted the mi…
Created on: Monday 9th February 2015
Last updated: Monday 9th February 2015
Spatial data recorded.

Record ID: NMGW-9F4BEE
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Medieval copper alloy buckle with a rectangular frame and folded plate, probably of 13th or 14th century date The buckle is near-complete, missing the pin (with an overall length of 35.2mm and a weight of 8.8g). The rectangular frame (15.3mm long and 24.2mm wide) has a prominent lip with notch to accommodate the missing pin. The frame is rectangular-sectioned but is deep (with a height of 5.5mm and a thickness of 1.6mm). The folded sheet plate (24.2mm long, 23.5mm wide, 6.2mm deep and 2.0mm thick) has a slot for the pin and is recessed to accommodate the corners of the frame. The…
Created on: Tuesday 10th February 2015
Last updated: Wednesday 19th July 2017
Spatial data recorded.

Record ID: NMGW-F0CDB3
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Medieval copper alloy buckle plate of 14th or 15th century date The buckle is fragmentary, represented by the incomplete folded sheet metal plate only (with a surviving length of 29.0mm and a weight of 2.8g). The plate is corroded with some peripheral loss but was rectangular and had a slot for the pin. The corners were recessed to accommodate the missing frame. The folded strips flanking the slot are now broken and incomplete. The plate was attached to the belt by two attachment rivets (of 1.6mm diameter), both positioned near the attachment end. The strap between the plates re…
Created on: Thursday 26th February 2015
Last updated: Thursday 26th February 2015
Spatial data recorded.

Record ID: NMGW-6030C2
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Medieval copper alloy buckle of oval frame and integral rigid plate type, of mid-13th or 14th century date The buckle is probably near-complete, perhaps missing the attachment end (with a length of 41.4mm and a weight of 4.0g). The outside edge is embellished with an integral bilobed openwork device, probably a crown. The frame is oval (giving the buckle a maximum width of 13.2mm) and is of sub-rectangular section (with a width of 1.7mm - 2.7mm and a thickness of 2.2mm). There is a circular perforation behind the frame to accommodate the copper alloy pin (with a length of 13.5mm). Th…
Created on: Monday 22nd January 2018
Last updated: Monday 22nd January 2018
Spatial data recorded.

Record ID: NMGW-046423
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Medieval copper alloy buckle plate or strap-end of 13th to 15th century date The sheet plate is of single sheet, folded widthways type (with a length of 32.3mm and a weight of 2.7g). The sides of the plate are straight and parallel (with a width of 14.3mm). Near the attachment end are two dome-headed attachment rivets (with a length of 4.2mm). The front of the plate is decorated along the sides and attachment end with a double linear border of rocker-arm decoration which respects the attachment rivets. The space between the double border is infilled with diagonal lines, which are…
Created on: Tuesday 26th January 2021
Last updated: Tuesday 26th January 2021
Spatial data recorded.

Record ID: NMGW-D89D4D
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Medieval copper alloy buckle of 14th to 16th century date The buckle has an oval frame with ornate outside edge and a solid, integral plate and is missing the pin (with a slightly distorted length of 46.3mm and a weight of 16.5g). The outside edge is expanded and of sub-circular section with protruding rounded ends (giving a length of 26.3mm, a diameter of 6.6mm - 7.4mm). At the centre of the outside edge is a notch for the missing pin. The sides of the frame are convex and of slender rectangular section (with a maximum width to the frame of 28.3mm and with a section of 2.2mm wide a…
Created on: Wednesday 21st February 2018
Last updated: Wednesday 6th July 2022
Spatial data recorded.

Record ID: NMGW-7BB227
Object type: BUCKLE
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Copper alloy buckle of uncertain date, possibly late Roman or medieval The buckle is of oval form with ornate outside edge and is incomplete, missing the bar and pin (with a length of 29.9mm, a width of 44.9mm and a weight of 8.5g). The outside edge of the frame is of rectangular section (14.6mm wide and 2.8mm thick) and has elaborate decoration, comprising three open C-shaped arcs, the central 'C' faces outwards and is flanked on either side by the remaining two arcs. Each of the 'C' shaped openings is bordered by a groove, defining a ribbed border. At the centre, is a notch to ac…
Created on: Wednesday 22nd October 2014
Last updated: Wednesday 22nd October 2014
Spatial data recorded.

Record ID: NMGW-1D8A07
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
An incomplete copper alloy and enamel object of likely Early Medieval date. The object appears to be largely complete apart from patches of surface loss, minor edge damage and the loss of the outer parts of the reverse perforated lugs. The object consists of a plate with uneven thickness and a slightly curved profile. In plan it is rectangular with one end rounded the other end rectilinear, the rounded end terminating with a projecting circular knop. The obverse of the object is decorated with geometric motifs executed in champlevé enamel. The design is executed in two mai…
Created on: Tuesday 21st June 2022
Last updated: Wednesday 22nd June 2022
Spatial data recorded.

Record ID: NMGW-1F8607
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
A complete Medieval copper alloy buckle, dating from c. AD 1250 to 1400. The buckle frame is circular in plan and measures 41.69mm in diameter. In cross section, the frame is oval and has no constriction for the pin, it measures 4.78mm wide and 4.22mm deep. The pin is oval in cross section and has an open loop attaching it to the frame. It is 46.31mm long and 4.75mm wide, narrowing to 3.71mm, and ending in a blunt point. The buckle has a grey patina with areas of blackening and pale copper-green corrosion.
Created on: Friday 3rd March 2023
Last updated: Sunday 30th April 2023
Spatial data recorded.