Back to simple search | Back to advanced search

    You searched for:

    • Institution: NMGW
    • Direction: desc
    • Sort: objectType
    • Broad period: MEDIEVAL
    • Page: 6

  • Thumbnail image of NMGW-510C31

Record ID: NMGW-510C31
Object type: STRAP END
Broad period: MEDIEVAL
County: Bridgend
Workflow stage: Awaiting validation Find awaiting validation
Late medieval copper alloy strap-end of 15th century date The strap-end is of 'Crescentic', two-piece type and is incomplete, missing the sheet copper alloy back-plate, the attachment end and part of the terminal (with a surviving length of 40.0mm and a weight of 15.3g). The strap-end was attached using two iron rivets, which remain in place near the attachment end. The ends of the crescent have been lost and the enclosed area has a cast openwork design of irregular lines radiating from a central point. The curved body of the strap-end is circular (with a diameter of 33.8mm). The d…
Created on: Wednesday 8th October 2014
Last updated: Wednesday 8th October 2014
Spatial data recorded.


  • Thumbnail image of NMGW-4B09F6

Record ID: NMGW-4B09F6
Object type: STRAP END
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy strap-end of 13th to 15th century date The strap-end is of riveted, double sheet-metal type, without a spacer and is fragmentary, missing the attachment end and the break appears to have occurred relatively recently (with a surviving length of 21.4mm, a thickness of 1.7mm and a weight of 1.5g). At the break (with a width of 9.2mm), the sheet plate (with a thickness of 0.5mm) has distorted. The sides of the surviving part are straight and slightly convergent towards the terminal. The terminal is of trefoil form (with a length of 7.8mm). The two plates are sec…
Created on: Tuesday 25th November 2014
Last updated: Tuesday 25th November 2014
Spatial data recorded.


  • Thumbnail image of NMGW-5E7FD2

Record ID: NMGW-5E7FD2
Object type: STRAP END
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy strap-end of 14th to 15th century date The strap-end is heavily corroded but appears to be of composite form with a forked spacer and is likely to be near-complete (with a length of 19.4mm, a thickness of 3.1mm and a weight of 2.2g). The top edge is straight (with a width of 13.2mm) and the sides are straight and near-parallel to the rounded end. There was a terminal knop at the centre of the base. The re is no surviving decoration on either of the plates.
Created on: Friday 14th November 2014
Last updated: Friday 14th November 2014
Spatial data recorded.


  • Thumbnail image of NMGW-A2B832

Record ID: NMGW-A2B832
Object type: STRAP END
Broad period: MEDIEVAL
County: Rhondda Cynon Taf
Workflow stage: Awaiting validation Find awaiting validation
Late medieval copper alloy strap-end of 15th century date The strap-end is of Crescentic type and is incomplete, missing the end of the terminal and the back-plate (with a surviving length 42.0mm, a thickness of 2.8mm and a weight of 8.1g). The missing back-plate was secured with four separate rivets, which remain in place. The rear of the crescent is recessed to accommodate the strap. The strap-end has a sub-oval aperture (17.1mm wide), open at the top. The crescentic area (with a maximum width of 31.0mm) has geometric incised decoration, probably letters for a brief inscription i…
Created on: Tuesday 10th February 2015
Last updated: Tuesday 10th February 2015
Spatial data recorded.


  • Thumbnail image of NMGW-1FD924

Record ID: NMGW-1FD924
Object type: STRAP END
Broad period: MEDIEVAL
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy strap-end of single sheet type, folded widthways and of late 13th to late 15th century date The strap-end is complete and of rectangular form (with a length of 20.9mm, a width of 12.2mm and a weight of 4.0g) made of folded sheet copper alloy. The strap was secured by a single separate rivet near the attachment end, which remains in place and appears more neatly finished on the front face. The attachment end remains open (with a gap of 2.6mm and a depth of 4.9mm). The sheet plate is both longer and thicker on the front plate (with a thickness of 1.2mm at the …
Created on: Monday 16th February 2015
Last updated: Monday 16th February 2015
No spatial data available.


  • Thumbnail image of NMGW-A2EEDE

Record ID: NMGW-A2EEDE
Object type: STRAP END
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy openwork probable strap-end, of late medieval date. The mount is incomplete, broken at one end and possibly also broken at the other (with a surviving length of 32.2mm and a weight of 10.7g). The wider end is straight and is the thickest surviving part of the mount (with a width of 25.1mm and a thickness of 4.2mm) and appears to be near-complete but is corroded. The end is decorated on both faces with diagonal incised marks; on the front face, the marks are cut through a rounded rib, while on the rear fewer marks are cut through the edge. The sides are convex (reaching a…
Created on: Tuesday 10th February 2015
Last updated: Wednesday 2nd January 2019
Spatial data recorded.


  • Thumbnail image of NMGW-C9F386

Record ID: NMGW-C9F386
Object type: STIRRUP
Broad period: MEDIEVAL
County: Caerphilly
Workflow stage: Published Find published
Cast copper alloy stirrup of Late Medieval date, probably dating from the late 14th to the 16th century. The stirrup is incomplete, missing the footrest and approximately half of one of the side arms. The side arms are of sub-triangular section at the suspension loop and widen towards the footrest. The more complete arm has moulded decoration on the outside face, consisting of a raised rectangular panel, containing a raised chevron. The side arm, beneath the decoration, is of oval section. The more complete arm is unlikely to be distorted or bent outwards, since as Ward Perkins (1940, …
Created on: Tuesday 2nd December 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NMGW-719889

Record ID: NMGW-719889
Object type: STIRRUP
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy stirrup of mid-14th to 15th century date The cast stirrup is fragmentary, represented by the upper part only, comprising the integral cover-plate, suspension bar and fragmentary sides (with a surviving length of 44.7mm and a weight of 50.0g). The cover-plate is trapezoidal with a castellated top edge (36.5mm wide and 3.7mm thick) and moulded rib decoration beneath the top and above the basal edges (at 45.8mm wide). Between the ribbed borders, the cover-plate is decorated with punched marks defining repeating ovals of double-lines within punched linear border…
Created on: Wednesday 4th March 2015
Last updated: Wednesday 4th March 2015
Spatial data recorded.


  • Thumbnail image of NMGW-F16A12

Record ID: NMGW-F16A12
Object type: STEELYARD WEIGHT
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy steelyard weight fragment, probably of late 13th or early 14th century date The weight is represented by a fragment of the copper alloy outer casing only and has a surviving height of 54.8mm, a surviving width of 57.3mm and has a weight of 47.3g.The casing has a thickness of 2.7mm. The casing has an embossed heraldic shield device (35.3mm long by 27.8mm wide) comprising three chevrons, the upper chevron abuts the top of the shield. Each chevron is enhanced with a central incised line. The cells surrounding the chevrons are unlikely to have held enamel. The copper…
Created on: Thursday 19th July 2007
Last updated: Friday 28th February 2014
Spatial data recorded.


  • Thumbnail image of NMGW-53D636

Record ID: NMGW-53D636
Object type: SPUR
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Published Find published
One side fragment, which would have flanked the wearer’s foot, of a cast spur, probably of rowel type. The fragment widens across its length as it approaches the rear or neck of the spur and has a gentle curve. The spur fragment is simply decorated with a prominent border at each side, enclosing a gently rounded mid section.
Created on: Wednesday 16th July 2003
Last updated: Thursday 24th February 2011
No spatial data available.


  • Thumbnail image of NMGW-D98884

Record ID: NMGW-D98884
Object type: SPOON
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published Find published
Medieval silver spoon, now in two parts, comprising a bent handle junction with bowl, and the remaining bowl, folded twice. The stem is hexagonal at the base, becoming circular in cross-section mid-way along the shaft up to the simple devolved 'diamond-point' terminal. The underside of the bowl at the junction with the handle bears what appears to be a wriggle work cross-crosslet, now only partially visible, on the base of the bowl at the junction with the handle. The overall length is 81.55mm; maximum thickness of stem 3.3.x 3mm; bowl width about 32mm; bowl thickness 1mm; weight 1…
Created on: Friday 11th August 2017
Last updated: Thursday 24th August 2017
Spatial data recorded.


  • Thumbnail image of NMGW-05E56D

Record ID: NMGW-05E56D
Object type: SPOON
Broad period: MEDIEVAL
County: Bridgend
Workflow stage: Published Find published
Medieval copper alloy spoon of 15th or 16th century date The spoon is near-complete but is without the organic parts of the handle and the end of the bowl is damaged (with a length of 113.1mm and a weight of 48.4g). The bowl is of fig-shaped form (51.8mm long, 44.2mm wide, 12mm deep and 1.3mm - 3.0mm thick) with a rounded end and the top edge has a slight concavity. The stem is comparatively short (at 61mm) and is of rounded, sub-rectangular section with expansions (8.8mm thick and 7.4mm wide) flanking the bowl, at the apex and midway between the two. The mouldings are enhanced with …
Created on: Friday 27th February 2015
Last updated: Friday 18th May 2018
Spatial data recorded. This findspot is known as 'Coity Castle', grid reference and parish protected.


  • Image not taken

Record ID: NMGW3219
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
Workflow stage: Published Find published
Lead, or lead alloy, perforated biconvex spindle whorl. Diameter of perforation 7-10mm, external diameter 19-21mm, height 11mm, weight 16.4g. Medieval to post-medieval.
Created on: Tuesday 19th June 2001
Last updated: Thursday 24th February 2011
No spatial data available.


  • Image not taken

Record ID: NMGW3236
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published Find published
Discoidal spindle whorl - stone (sandstone - dark red brown colour). Diameter 34-35mm; diameter of perforation 9mm; thickness (minimum) 10mm; weight 12.9 grams. One face of the spindel whorl is split, possibly by plough damage, and the surviving face is marked by the plough, although this may be a knife mark. Probably either medieval or later in date.
Created on: Tuesday 26th June 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NMGW-23A510

Record ID: NMGW-23A510
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Published Find published
Recorded at the Hidden Treasure Finds Day at National Museums & Galleries of Wales. Cast lead spindle-whorl, probably of Medieval or Post Medieval date. The spindle-whorl is of bi-conical form with a heavy rounded shoulder. Both faces are decorated with repeating raised chevrons, forming a star design around the central aperture.
Created on: Monday 24th November 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NMGW-23B831

Record ID: NMGW-23B831
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Published Find published
Recorded at the Hidden Treasure Finds Day at National Museums & Galleries of Wales. Cast lead spindle-whorl, probably of Medieval or Post Medieval date. The spindle-whorl is of sharp bi-conical form. Both faces are decorated with straight lines forming rectangular cells, and containing one or two pellets.
Created on: Monday 24th November 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NMGW-23BEC2

Record ID: NMGW-23BEC2
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Published Find published
Recorded at the Hidden Treasure Finds Day at National Museums & Galleries of Wales. Cast lead spindle-whorl, probably of Medieval or Post Medieval date. The spindle-whorl is of rounded bi-conical form. The surface of the spindle-whorl is eroded and no decoration is now evident. The whorl has a comparatively large central aperture.
Created on: Monday 24th November 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NMGW-39A733

Record ID: NMGW-39A733
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Powys
Workflow stage: Published Find published
Decorated lead spindle whorl of uncertain date, but probably Medieval or Post Medieval. The spindle whorl is of flattened bi-conical form. Both faces are decorated with raised outer, inner and central mouldings, defining three concentric circles. The concentric circles are interrupted by four right-angled (or near right-angled) radiating lines.
Created on: Wednesday 20th August 2003
Last updated: Thursday 24th February 2011
No spatial data available.


  • Image not taken

Record ID: NMGW-F27313
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Torfaen
Workflow stage: Published Find published
Lead spindlewhorl of uncertain date, possibly medieval. The spindlewhorl is undecorated and of biconical form with a relatively large central perforation.
Created on: Friday 29th August 2003
Last updated: Thursday 24th February 2011
No spatial data available.


  • Thumbnail image of NMGW-E98935

Record ID: NMGW-E98935
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Newport
Workflow stage: Awaiting validation Find awaiting validation
Cast lead spindle whorl of bi-conical form, and probably dating to the Medieval or Post Medieval period. Both faces are decorated with raised moulded irregular lines.
Created on: Wednesday 21st January 2004
Last updated: Thursday 24th February 2011
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 1,046
Search server index: objects

You are viewing records: 101 - 120.

Search statistics

  • Total quantity: 1,126
  • Mean quantity: 1.076
  • Maximum: 17

Filter your search

101 - 120 of 1,046 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.