Back to simple search | Back to advanced search
You searched for:
Record ID: NMGW-252132
Object type: BUCKLE
Broad period: MEDIEVAL
County: Rhondda Cynon Taf
Workflow stage: Awaiting validation
Medieval copper alloy buckle plate, probably of 13th or 14th century date
The buckle plate is near complete, although the buckle frame and pin are missing. The plate has a length of 21.88mm, a width of 18.04mm and has a weight of 3.8g. The buckle plate is folded with a slot for the pin and a recess for the frame. The rear of the folded plate is narrower than the face, with a width of 14.59mm. The face is decorated with a rocker-arm or zigzag border, outside a square panel defined by incised lines. On the interior of the panel is an incised spiral. The incised square and spiral contain…
Created on: Wednesday 27th June 2007
Last updated: Sunday 20th October 2013
Spatial data recorded.
Record ID: NMGW-D43403
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cardiff
Workflow stage: Published
Medieval copper alloy buckle, dating from the mid-14th to the mid-15th century
The buckle comprises an oval, lipped frame with a folded sheet plate. The buckle is near-complete, missing some of the pate and the end of the pin (with an overall, distorted length of 33.7mm and a weight of 2.7g). The oval frame (with a length of 17.8mm and a width of 19.1mm) is of trapezoidal section on the outside edge (2.9mm thick), becoming sub-rectangular on the sides. The lip has a prominent notch for the pin. The bar is narrowed and offset. The pin is of circular, tapering section (2.1mm maximum dia…
Created on: Tuesday 4th March 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.
Image not taken
Record ID: NMGW3221
Object type: BUCKLE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Published
Part of a cast copper alloy, single loop buckle with a sub-triangular frame and a narrowed offset strap-bar. The strap-bar is now missing. The missing strap-bar would have accommodated the buckle's pin and possibly also a sheet metal buckle plate. A groove on the front of the buckle's frame shows where the pin rested; this feature is probably the result of wear rather than a deliberately cast notch. The buckle is also slightly distorted. Width 55mm, length 21mm, weight 9.5grams (NB dimensions follow those defined by Egan and Pritchard 1991, 56, fig.35). Medieval closer dating of this …
Created on: Tuesday 19th June 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.
Image not taken
Record ID: NMGW3283
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy single loop D-shaped buckle with a frame embellished with an ornate outer edge, and a narrowed and offset strap bar. The outer edge of the frame has a notched lip flanked on either side by a pair of transverse knops. Egan and Pritchard have published a close parallel, recovered from excavations in London, which dates to c.AD1350 to c. AD 1400 (1991, 73, no.297). A broadly comparable date for the St Nicholas buckle is not unreasonable.
Created on: Thursday 13th September 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.
Image not taken
Record ID: NMGW3304
Object type: BUCKLE
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Published
Cast copper alloy buckle pin with sub-rectangular sectioned stem and a raised grip. Length 35mm. Medieval.
Created on: Friday 21st September 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.
Image not taken
Record ID: NMGW3313
Object type: BUCKLE
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Published
Incomplete cast copper alloy buckle with integral, hollow, tapering plate (also known as a box chape) perforated by two rivet holes. The end of the plate is missing as is most of the frame, although traces of the iron pin survive. The front of the plate is incised with longitudinal lines and traces of either tinning or silvering adhere to the surface of the plate. It is not certain whether the incised lines are decorative features or keying for the plating. Surviving length 30mm, maximum width 16.5mm, maximum thickness 6mm. Probably an example of the late fourteenth century to early fi…
Created on: Monday 24th September 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.
Image not taken
Record ID: NMGW399
Object type: BUCKLE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Cast copper alloy double loop annular buckle with plain bevelled edges, slightly recessed strap bar and notch to accommodate the pin. The strap bar is distorted. Diameter 34mm x 38mm, thickness 3mm, weight 10.5 grams. Fourteenth to seventeenth century in date.
Created on: Monday 30th April 2001
Last updated: Thursday 24th February 2011
Spatial data recorded.
Record ID: NMGW-90D576
Object type: BUCKLE
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Published
Cast circular buckle frame, with central bar set back from the frame. The frame has a 'D' shaped cross-section and is decorated on its upper surface with a single incised line forming a chevron motif. The central bar is thin (c. 1.5mm diameter) and is slightly bent. There is an area of iron corrosion near one of the ends of the bar, suggesting the now absent pin was of iron.
Created on: Friday 25th April 2003
Last updated: Tuesday 14th August 2018
Spatial data recorded.
Record ID: NMGW-FEEDE7
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast buckle with an elaborate scallop lip an projections at the bar terminals. The frame has a bevelled outer edge and flat underside. The bar has a circular cross section with the pin still attached. The pin has a D shaped cross-section and tapers along its length to the point. The buckle is slightly concave in profile, possibly because of recent distortion.
Created on: Wednesday 30th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.
Record ID: NMGW-FF3C75
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Decorative frame with the bar offset and narrowed and slight mouldings at the bar terminals. The frame has a D shaped cross section and expands towards the outside edge of the frame. The pin survives and is a simple piece of flat copper alloy tapering to a point with a single transverse ridge near the loop.
Created on: Wednesday 30th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.
Record ID: NMGW-F64783
Object type: BUCKLE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Published
This item could have been utilised as either a buckle or a brooch. It is constructed of an annular frame with a decorative projection on the opposite end of the frame to the pin constriction. The frame has a flattened D-shaped cross-section and is generally wider and thicker at the pin constriction and at the projection. The decorative projection is lozenge-shaped and consists of V-shaped moulding before a centrally faceted terminal, and may represent a crude animal head or possibly a flower, elsewhere the frame is plain. The pin is absent.
Created on: Thursday 5th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.
Record ID: NMGW-499672
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Incomplete cast small buckle with an integral plate, which has broken across a rivet hole. The buckle has a hole to house the missing pin. The sides of the frame are chamfered, while the outside edge is flat and expanded. There are two decorative projections either side of the plate. The surface has corroded.
Created on: Monday 9th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.
Record ID: NMGW-B32807
Object type: BUCKLE
Broad period: MEDIEVAL
County: Carmarthenshire
Workflow stage: Published
Medieval copper alloy buckle, probably of late 13th to 14th century date
The buckle has a trapezoidal frame with integral plate and is near complete with an overall length of 41.27mm. The buckle frame is of sub-square section and is widest at the outside edge with a width of 15.59mm and has a width of 11.47mm on the inside edge. The plate has a damaged hole for the missing pin. The integral plate is rigid and was attached by an integral rivet on the rear of the plate near the frame, and by an iron rivet at the inside edge of the plate, as evidenced by iron corrosion on the terminal. T…
Created on: Tuesday 21st February 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.
Record ID: NMGW-DC86A1
Object type: BUCKLE
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation
Cast copper alloy annular buckle of Medieval date, probably dating from the late 14th century to the 15th century. The frame is circular with an external diameter of 48-49mm. The frame is of oval section (6 x 5mm) and is plain. The cast pin is 51.8mm long and has a transverse ridge beneath the loop. The pin has a faceted rectangular section and a maximum width of 5.1mm with sides that converge slightly to a blunt point. The buckle weighs 33.3g.
Created on: Thursday 24th February 2005
Last updated: Wednesday 17th October 2012
Spatial data recorded.
Record ID: NMGW-1C8EA1
Object type: BUCKLE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle frame, probably of mid 14th to 16th century date.
The buckle is likely to have been of double oval framed type. The frame has broken with only one of the two loops present and has a surviving length of 17.63mm, width of 21.73mm and weighs 1.6g. The outside edge of the frame has a thickness of 2mm with a flat underside and straight inner-edge. The bar is narrowed and has a diameter of 1.16 – 2.50mm. The frame is likely to have broken on the other side of the bar before the other loop, although it is possible that the frame was of single loop type with cu…
Created on: Monday 21st November 2005
Last updated: Tuesday 7th January 2014
Spatial data recorded.
Record ID: NMGW-708CA5
Object type: BUCKLE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Published
Copper alloy decorative mount with a zoomorphic design. The raised design is contained within a rectangular border and depicts a bird with rear facing ribbed wings and head facing upwards. The cells between the design originally carried red enamel, small traces of which survive and can be seen with the aid of a microscope. The mount was originally rectangular in shape with at least two of the corners carrying bronze rivets, one of which survives. The sides have corroded and little of the original surface survives.
Created on: Wednesday 11th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.
Record ID: NMGW-D7DE05
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast oval frame buckle with offset and narrowed bar of Medieval date (c.1200-c.1400). The outer edge of the buckle is expanded and has a sub-triangular cross-section with a flat reverse. The bar is of D-shaped cross-section and the pin is now absent.
Created on: Monday 16th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.
Record ID: NMGW-2C8375
Object type: BUCKLE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Near complete Medieval cast copper alloy buckle with zoomorphic integral plate and ornate subrectangular frame, possibly of 14th century date. The sides of the buckle frame taper towards the outside edge of the frame, which gently curves towards a prominent lip, incorporating a notch for the pin. The pin is triangular and flat in profile, with the suggestion of two transverse markings around the pin. The plate is thick but relatively slender in relation to the frame. The plate depicts a beast, probably a dog biting, on the broken attachment at the terminal. The reverse of the buckle is…
Created on: Friday 20th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.
Record ID: NMGW-2F0AF6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Published
Gilded buckle comprising of a trapezoidal frame with folded sheet plate of Medieval date, possibly 14th century. The outside edge of the frame is ‘V’ shaped and extends slightly beyond the frame sides and is also more substantial than the rest of the frame. There is a low notch for the now missing pin, which was of iron. The folded sheet plate is rectangular with a rounded inside edge of the plate. The plate has a slot for the pin and is recessed for the frame. The single attachment rivet is still present near the inside edge of the plate. Gilding survives on both the frame and plate.
Created on: Friday 20th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.
Record ID: NMGW-30F076
Object type: BUCKLE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Published
Cast copper alloy single loop buckle with a plain circular frame, probably dating from 14th to the early 15th century (Ottaway & Rogers 2002, 2886). There has been confusion in categorising annular brooches and annular buckles, Egan’s (in Egan & Pritchard 1991, 64-5) definition of brooch frames having a constriction or a hole for the pin, would result in this example being categorised as a buckle.
The frame is slightly oval, possibly as a result of distortion and is circular in cross-section. The pin is still attached and has an open loop around the frame. The pin is ‘D’ shaped …
Created on: Friday 20th June 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.
Records per page: 10 20 40 100
Sort your search by:
Which direction?
Total results available: 135
Search server index: asgard
You are viewing records: 1 - 20.