Record ID: NMGW-0EE2F4
Object type: WHETSTONE
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Published
Perforated whetstone of rectangular cross-section, made of a fine-grained siltstone. The stone tapers gently to the flat end. The top of the whetstone has been damaged and is irregular. The perforation is regular and has been drilled; it has been positioned slightly off-centre on one face. All four faces illustrate evidence of whetting, but show no obvious sign of being dished through prolonged use.
Created on: Tuesday 13th May 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-40A462
Object type: WHETSTONE
Broad period: EARLY MEDIEVAL
County: Monmouthshire
Workflow stage: Published
Top fragment of a perforated whetstone. The stone has a bevelled end and straight sides. The perforation is oval and has an hour glass profile. Both faces are smooth and dished from use. One face has a facet running along one of the sides.
Created on: Tuesday 15th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-AABB8D
Object type: WEIGHT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
Perforated stone weight of uncertain date possibly medieval The weight is of irregular rectangular form (93.9mm long, 66.6mm wide and weighing 150.5g), of variable thickness (with a maximum thickness of 19.5mm) and is made from a coarse-grained sandstone. The top edge and one of the side edges appear to be moderately rounded and are likely to be unmodified, while the other two edges are irregular and probably trimmed to the desired shape. The perforation is circular (10.6mm diameter) and is wider at one face, but appears to have been drilled rather than pecked. One face (convex) …
Created on: Wednesday 4th August 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded.

Record ID: NMGW-272095
Object type: STYLUS
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation
An incomplete stone rod, possibly a stylus, of Medieval or Post Medieval date (c. AD 1200-1800). The rod is roughly cylindrical in shape with two flatter sides and tapers to a rounded point. One end appears broken and is sub-rectangular in cross-section. The opposite, tapered end appears to have a incised line which likely spanned the circumference, but detail is lost to wear. Stone styli were used from the 12th to early 19th century, often used with wax. The object is 27mm in length, 5.3mm wide and weighs 1.36g. Parallels have been recorded in the PAS database, e.g. KENT-ADC560…
Created on: Monday 18th May 2020
Last updated: Wednesday 6th July 2022
Spatial data recorded.

Record ID: NMGW-5BE81F
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Wrexham
Workflow stage: Published
Stone spindle-whorl of uncertain date, Roman to early Post Medieval, c. 100 - 1700 The spindle-whorl is comparatively regular and circular (of 35.8 - 37.4mm diameter and weighing 27.8g) is made from a fine-grained, micaeous sandstone, now with ground surfaces. The spindle-whorl is of sub-rectangular section (13.9mm thick) with near-flat faces. The perforation is central and is circular (7.4mm diameter) with straight parallel sides. There is no surviving evidence of applied decoration to the surfaces. Margeson (1993, page 184)[1] has suggested that the weight of a spindle who…
Created on: Wednesday 26th November 2014
Last updated: Thursday 4th December 2014
Spatial data recorded.

Record ID: NMGW-D53BCB
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
A complete stone or ceramic spindle whorl, weight, or gaming piece of uncertain date, possibly Roman to Medieval. The object is circular in plan and convex in profile with a diameter of 25.9mm, height of 18mm and weighs 13.99g. The circular central perforation penetrates the object thickest part of the object (18mm) with an internal diameter of 6.7mm. The object is finely made and evenly polished with a smooth even surface. The surface is undecorated and lacks diagnostic features, so it is not possible to securely ascribe a date. A small pebble is wedged inside one side of the perfora…
Created on: Monday 18th October 2021
Last updated: Monday 18th October 2021
Spatial data recorded.

Record ID: NMGW-C74749
Object type: SPINDLE WHORL
Broad period: POST MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation
Stone spindle whorl of uncertain date, Roman to early Post Medieval, c. 100 - 1700 The sub- circular spindle-whorl is made from coarse-grained sandstone and is of near rectangular section with slightly convex faces, with a thickness of 9.5mm. The whorl has a maximum diameter of 28.6mm and weighs 12.6g. The central perforation has a consistent profile and has a diameter of 6.5mm. It has been suggested that the weight of a spindle whorl is demonstrative of the thickness of yarn produced, with lighter spindle whorls (3 - 5 grams) being used for spinning cotton and the heavier …
Created on: Wednesday 30th December 2020
Last updated: Wednesday 30th December 2020
Spatial data recorded.

Record ID: NMGW-E35226
Object type: ROTARY QUERN
Broad period: MEDIEVAL
County: Isle of Anglesey
Workflow stage: Published
Fragment of a quern stone, probably of Medieval date. The stone is a conglomerate with large quartz inclusions. This is likely to be the upper stone of pair of quern stones. The inner area, near the centre of the stone has a raised rounded collar, before the opening to take the grain. The underside of the quern is smooth and has a slight concave profile.
Created on: Monday 4th August 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-5B910B
Object type: QUERN
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Published
Stone rotary quern fragment probably of Roman date The stone is from a rotary quern and is probably a fragmentary upper-stone in coarse-grained sandstone, now of sub-triangular form (with a maximum surviving length of 99.0mm, a maximum surviving width of 91.5mm and a weight of 357.0g). One of the edges is curved and is likely to be the original outer edge of the quern. The stone is of rectangular section and is thickest at the outside edge, which is without a raised lip (with a thickness of 33.1mm compared with a thickness of 30.1mm at the inside). The grinding face has radial gr…
Created on: Tuesday 3rd March 2015
Last updated: Wednesday 23rd September 2015
Spatial data recorded.

Record ID: NMGW-EDADE3
Object type: POLISHED AXEHEAD
Broad period: NEOLITHIC
County: Pembrokeshire
Workflow stage: Awaiting validation
Neolithic polished stone axe The axe is fragmentary, represented by approximately half with the blade-end present (with a surviving length of 108.3mm and a weight of 310.6g). The break occurred in antiquity but a further flake has been detached from the broken end and blade more recently. The axe has an oval body section, with a flat facet on each side (with a width at the break of 65.2mm, a thickness of 30.6mm and a side facet width of 4mm – 6mm). The surviving lengths of the side are near-straight, slightly convex (reaching a surviving maximum width of 66.4mm, 42mm from the b…
Created on: Monday 25th January 2021
Last updated: Monday 25th January 2021
Spatial data recorded.

Record ID: NMGW-A2477F
Object type: PERFORATED OBJECT
Broad period: MESOLITHIC
County: Pembrokeshire
Workflow stage: Published
Perforated stone pebble, possible Prehistoric stone pebble hammer or mace-head of Mesolithic or Neolithic date The mace-head is made on a water-rolled pebble and is complete (with a length of 126.6mm, a maximum width of 85.7mm, a maximum thickness of 33.3mm and a weight of 558.1g). The perforation is off-centre and has a pronounced hour-glass profile (with diameters at the faces of 31mm and 33mm and a minimum diameter of 9.0mm). There is evidence of pecking on the sides of the perforation, which are now well-worn, probably through subsequent water action, rather than rubbing from…
Created on: Tuesday 10th February 2015
Last updated: Friday 30th October 2015
Spatial data recorded.

Record ID: NMGW-70B382
Object type: MACE
Broad period: NEOLITHIC
County: Gwynedd
Workflow stage: Awaiting validation
Neolithic partially polished stone mace head dating to 3rd millennium BC (c. 2800 – 2100BC) The polished mace-head is complete or near-complete (with a length of 98.8mm and a weight of 395.2g) and is of unusual form with a well-defined blade at one end. The butt is rounded and convex (61mm wide, 9mm deep and approximately 20mm thick) but is battered and irregular, possibly resulting from its use as a hammer. Both sides are near-straight, slightly concave across their lengths (83mm and 76mm) and rounded across their widths. The mace head is widest at the blade (with a width of 7…
Created on: Tuesday 21st July 2020
Last updated: Tuesday 21st July 2020
Spatial data recorded.

Record ID: NMGW-791160
Object type: LITHIC IMPLEMENT
Broad period: MESOLITHIC
County: Pembrokeshire
Workflow stage: Published
Late Mesolithic bevelled pebble.
Created on: Wednesday 30th July 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-F09AE4
Object type: LITHIC IMPLEMENT
Broad period: MESOLITHIC
County: Cornwall
Workflow stage: Awaiting validation
A complete bevelled pebble with probable hammer use wear of Mesolithic date. The tool is oval in cross section and tapers slightly from one end to the other. It is bevelled at one end and shows use wear consistent with hammering at the other. Bevelled pebbles are fairly common finds on later Mesolithic sites, particularly along the coast. They are commonly interpreted as being used in the processing of seal skins. This particular tool has been used as a hammer in addition to the bevelled edge, and may have been carried inland for this purpose.
Created on: Thursday 8th April 2021
Last updated: Thursday 8th April 2021
Spatial data recorded.

Record ID: NMGW-799DA3
Object type: LINEN SMOOTHER
Broad period: EARLY MEDIEVAL
County: Isle of Anglesey
Workflow stage: Awaiting validation
Utilised and decorated stone, possibly a slick-stone or linen-smoother of 9th or 10th century date The stone is domed with a flat base and has a maximum diameter of 97.93mm and a height of 51.35mm. The stone is a quartz conglomerate. The top of the stone has been decorated with an oval ring with dimensions: 43.5mm x 37.8mm (internal diameter: 12.3 – 13.9mm). Analysis using a scanning electron microscope indicated that the inlay is composed of calcium carbonate and red ochre. The decoration has been inlaid into a recessed channel in the stone, formed by polishing. The base of the …
Created on: Friday 13th January 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-9A96E6
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Powys
Workflow stage: Published
Silver bezel of a finger ring containing an orangey-red, cornelian, intaglio. The edge of the bezel is decorated by a line of triangles running round its bottom edge and the back by an engraved floral pattern. The intaglio depicts a winged male figure, probably Cupid, a large bunch of grapes and an animal, probably a hare. The intaglio would appear to be Roman, depicting Cupid, a bunch of grapes and a hare. The same combination can be seen on an intaglio from Bath (Henig 1978, 200 no.113) where cupid is holding a bunch of grapes and a hare is jumping up to reach it. On the present int…
Created on: Wednesday 4th February 2009
Last updated: Wednesday 6th July 2011
Spatial data recorded.

Record ID: NMGW-C8902D
Object type: BUTTON
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Stone button of uncertain date The button is sub-circular in plan and pointed oval in section (with a diameter of 14.5mm - 16.0mm, a thickness of 5.5mm and a weight of 2.4g) and appears to be made of a fine-grained black shale. Both faces are convex and have been polished to achieve the form. One face has two small parallel holes (of c. 0.8mm diameter) drilled through, from just above the edges. The line of the channels has been crudely scored into the surface above each channel. No other decoration is evident. The surface is abraded chipped. The 'button' is unusual and is diffi…
Created on: Monday 1st December 2014
Last updated: Wednesday 15th May 2019
Spatial data recorded.

Record ID: NMGW-E32E36
Object type: BOWL
Broad period: EARLY MEDIEVAL
County: Isle of Anglesey
Workflow stage: Published
Incomplete worked sandstone bowl probably of Early Medieval or Medieval date. The exterior of the bowl, including the base, is sub-circular with a varying wall thickness of between 95 and 160mm. The interior and exterior of the bowl have been shaped by pecking. It is possible the bowl may have been a crudely worked font, but is more likely to have been utilised for some domestic or production activity.
Created on: Monday 4th August 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NMGW-EEDC22
Object type: AXEHEAD ROUGHOUT
Broad period: NEOLITHIC
County: Monmouthshire
Workflow stage: Awaiting validation
Neolithic stone axehead roughout The axehead is complete (with a length of 204mm and a weight of 419.4g) but has a little recent damage at both the blade edge and the butt. The butt is straight (with a width of 23mm) and the sides are moderately straight, gently convex and gradually divergent to the blade, reaching a maximum width (of 65.8mm) just above the blade (39mm from the blade edge). The blade edge (with a width of 61mm) has a deep and even curve (26mm deep). Both faces have a different profile, one has a clear convexity across its with and a gentle convexity across its le…
Created on: Monday 25th January 2021
Last updated: Monday 25th January 2021
Spatial data recorded.

Record ID: NMGW-E743EE
Object type: AXEHEAD ROUGHOUT
Broad period: NEOLITHIC
County: Powys
Workflow stage: Awaiting validation
A probable Neolithic stone axehead roughout of Neolithic date, c.4000-2500 BC. The object is in the early stages of shaping, with scars from large removals on both faces and does not appear to be a flake but rather a rock in the process of being shaped. The bifacial object is broadly sub-oval in plan, with an irregular lozenge section. The shaping has not progressed to a point where it is possible to discern a blade or butt end, though one end is more pointed that the other, which has a flat, angled end formed by excess material ending in a hinged fracture on one face. One face of the …
Created on: Tuesday 18th April 2023
Last updated: Thursday 6th July 2023
Spatial data recorded.