Record ID: NMGW-272095
Object type: STYLUS
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation
An incomplete stone rod, possibly a stylus, of Medieval or Post Medieval date (c. AD 1200-1800). The rod is roughly cylindrical in shape with two flatter sides and tapers to a rounded point. One end appears broken and is sub-rectangular in cross-section. The opposite, tapered end appears to have a incised line which likely spanned the circumference, but detail is lost to wear. Stone styli were used from the 12th to early 19th century, often used with wax. The object is 27mm in length, 5.3mm wide and weighs 1.36g. Parallels have been recorded in the PAS database, e.g. KENT-ADC560…
Created on: Monday 18th May 2020
Last updated: Wednesday 6th July 2022
Spatial data recorded.

Record ID: NMGW-5B910B
Object type: QUERN
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Published
Stone rotary quern fragment probably of Roman date The stone is from a rotary quern and is probably a fragmentary upper-stone in coarse-grained sandstone, now of sub-triangular form (with a maximum surviving length of 99.0mm, a maximum surviving width of 91.5mm and a weight of 357.0g). One of the edges is curved and is likely to be the original outer edge of the quern. The stone is of rectangular section and is thickest at the outside edge, which is without a raised lip (with a thickness of 33.1mm compared with a thickness of 30.1mm at the inside). The grinding face has radial gr…
Created on: Tuesday 3rd March 2015
Last updated: Wednesday 23rd September 2015
Spatial data recorded.

Record ID: NMGW-A2477F
Object type: PERFORATED OBJECT
Broad period: MESOLITHIC
County: Pembrokeshire
Workflow stage: Published
Perforated stone pebble, possible Prehistoric stone pebble hammer or mace-head of Mesolithic or Neolithic date The mace-head is made on a water-rolled pebble and is complete (with a length of 126.6mm, a maximum width of 85.7mm, a maximum thickness of 33.3mm and a weight of 558.1g). The perforation is off-centre and has a pronounced hour-glass profile (with diameters at the faces of 31mm and 33mm and a minimum diameter of 9.0mm). There is evidence of pecking on the sides of the perforation, which are now well-worn, probably through subsequent water action, rather than rubbing from…
Created on: Tuesday 10th February 2015
Last updated: Friday 30th October 2015
Spatial data recorded.

Record ID: NMGW-A2177B
Object type: AXEHEAD
Broad period: NEOLITHIC
County: Powys
Workflow stage: Published
Neolithic polished stone axehead dating from c. 3,500 to 2,200 BC date. The axehead is complete and is comparatively small (with a length of 109.0mm and a weight of 146.2g). The butt is comparatively wide (at 35mm), giving the axe a trapezoidal form and has a very gentle curve. The sides are straight and gradually divergent, reaching a maximum width (of 45.5mm) at the blade. Both faces are deeply convex giving the axe a pointed-oval body section. The axe reaches its maximum thickness (of 23.2mm) near the blade edge (27mm from the edge). The axe was flaked and then partially polis…
Created on: Tuesday 10th February 2015
Last updated: Thursday 19th February 2015
Spatial data recorded.

Record ID: NMGW-C8902D
Object type: BUTTON
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Stone button of uncertain date The button is sub-circular in plan and pointed oval in section (with a diameter of 14.5mm - 16.0mm, a thickness of 5.5mm and a weight of 2.4g) and appears to be made of a fine-grained black shale. Both faces are convex and have been polished to achieve the form. One face has two small parallel holes (of c. 0.8mm diameter) drilled through, from just above the edges. The line of the channels has been crudely scored into the surface above each channel. No other decoration is evident. The surface is abraded chipped. The 'button' is unusual and is diffi…
Created on: Monday 1st December 2014
Last updated: Wednesday 15th May 2019
Spatial data recorded.

Record ID: NMGW-5BE81F
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Wrexham
Workflow stage: Published
Stone spindle-whorl of uncertain date, Roman to early Post Medieval, c. 100 - 1700 The spindle-whorl is comparatively regular and circular (of 35.8 - 37.4mm diameter and weighing 27.8g) is made from a fine-grained, micaeous sandstone, now with ground surfaces. The spindle-whorl is of sub-rectangular section (13.9mm thick) with near-flat faces. The perforation is central and is circular (7.4mm diameter) with straight parallel sides. There is no surviving evidence of applied decoration to the surfaces. Margeson (1993, page 184)[1] has suggested that the weight of a spindle who…
Created on: Wednesday 26th November 2014
Last updated: Thursday 4th December 2014
Spatial data recorded.

Record ID: NMGW-4B403A
Object type: AXEHEAD
Broad period: NEOLITHIC
County: Conwy
Workflow stage: Published
Neolithic stone axehead, complete (with a length of 142.8mm and a weight of 536.3g) and has a consistent polish which has removed all the shaping, presumably through pecking. The butt is blunt and has an even curve (45mm wide). Both sides are straight and gradually divergent to the blade. The axe has a pointed elliptical body section and reaches a maximum thickness (of 35.3mm) approximately one third of the length from the blade (53mm from the blade). The blade is moderately rounded (and has a width of 80.4mm). The blade retains its edge and has a number of small nicks. Geological …
Created on: Tuesday 25th November 2014
Last updated: Thursday 4th December 2014
Spatial data recorded.

Record ID: NMGW-335F61
Object type: AXEHEAD
Broad period: NEOLITHIC
County: Cumbria
Workflow stage: Awaiting validation
Neolithic worked stone possibly an axehead rough-out or crude scraper, probably dating between c. 3500 - 2100BC The worked stone is complete (with a length of 136.8mm, a maximum width of 111.3mm, a maximum thickness of 50mm and a weight of 999.8g). The stone is a fine-grained greenstone from the 'Langdale axe factory' (Group VI) and has been partially shaped by flaking, mostly around the edges. The stone is sub-rounded, consistent with water rolling.
Created on: Wednesday 12th November 2014
Last updated: Wednesday 12th November 2014
Spatial data recorded.

Record ID: NMGW-333716
Object type: AXEHEAD
Broad period: NEOLITHIC
County: Worcestershire
Workflow stage: Published
Neolithic polished stone axehead, probably dating between c. 3500 - 2100BC The axehead is comparatively small (with a length of 78.0mm and a weight of 120.8g). The butt (with a width of 31.0mm) is convex and may have been reworked. The sides are straight and gradually divergent to the blade edge (with a width of 58.7mm). There is some polishing on the sides, which are slender. The faces are convex, producing a pointed oval body section, with a maximum thickness (of 20.3mm) near the middle (35mm from the blade edge). The blade edge is moderately straight and displays evidence of con…
Created on: Wednesday 12th November 2014
Last updated: Thursday 4th December 2014
Spatial data recorded.

Record ID: NMGW-906A4F
Object type: AXEHEAD
Broad period: NEOLITHIC
County: Swansea
Workflow stage: Published
Neolithic flaked and polished stone axe, c. 3500 - 2100BC The axe is near-complete (with a length of 164mm and a weight of 381.9g) with a few recent flaking scars and some rounding through water-rolling. The butt is narrow and moderately straight (with a width of 24mm). Both sides are convex, reaching their widest position (of 58.7mm) close the blade edge (46mm from the edge). The widest point is also close to the point of maximum thickness of the axe (at 31.0mm, 54mm from the blade edge). Both faces are convex across both their lengths and widths, with remnants of partially ground…
Created on: Thursday 23rd October 2014
Last updated: Tuesday 27th September 2016
Spatial data recorded.