Record ID: NMGW-0F16BD
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation
A near complete cast copper alloy and enamel Medieval harness pendant dating from 1200 to 1400 AD. The harness pendant is shield-shaped with an integrally cast loop; the front is decorated in relief blue enamel depicting a unicorn rampant.  The suspension loop is 8.5mm long with a loop hole (2.6mm in diameter) which is set 90 degrees from the shield. The suspension loop is positioned at the top center of the shield. The shield has a flat top, and sides which curve steeply to a point, it measures 25.08mm wide across its top and 29.65mm in length. The shield varies in thickness, me…
Created on: Monday 5th February 2024
Last updated: Friday 1st March 2024
Spatial data recorded. This findspot is known as 'Gower', grid reference and parish protected.

Record ID: NMGW-8FE098
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation
A complete pierced Post Medieval copper alloy Taunton farthing trade token, dated 1667. Obverse description: A capital letter T under a tun/cask, two roses flanking the base of the T. Obverse inscription: A • TAVNTON • FARTHING Reverse description: Taunton castle. Reverse inscription: BY • THE • CONSTABLES • 1667 • A hole measuring 2.5mm in diameter is punched through from the reverse (castle side) to the obverse. The token is a shiny brassy colour (caused by the coastal mud) and has a worn and pitted surface.
Created on: Wednesday 13th December 2023
Last updated: Tuesday 23rd January 2024
Spatial data recorded.

Record ID: NMGW-7C273D
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation
A complete Post Medieval cast copper alloy weight, dating from c. 1500 AD to 1800 AD. The coin weight is disk shaped with two flat faces. One face has been stamped X X at the centre. Above this is a stamped letter D. Below the initials is another unclear oval shaped stamp. On the other face X X is again stamped, due to corrosion it is not clear if the other stamps are also repeated. The weight is dark grey-brown in colour with small areas of green corrosion. Some of the original surface is lost to corrosion.
Created on: Wednesday 29th November 2023
Last updated: Tuesday 12th December 2023
Spatial data recorded.

Record ID: NMGW-3A90AA
Object type: DIRK
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Published
Middle Bronze Age bronze dirk, probably of Group III weapons with a damaged butt The dirk is near-complete with some peripheral damage to the butt (with a length of 121.3mm and a weight of 31.0g). The apex and shoulders of the butt are corroded and rounded (with a width of 31.1mm and a thickness at the apex of 0.8mm). There are the remains of a rivet hole on one side (with a diameter of 5.9mm) and probably the corroded remains on another on the opposite side.  It is now unclear whether the butt has significantly eroded around the rivet holes or whether the dirk has a reworked but…
Created on: Tuesday 14th November 2023
Last updated: Wednesday 20th March 2024
Spatial data recorded.

Record ID: NMGW-3A7AD0
Object type: CHISEL
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Awaiting validation
Late Bronze Age socketed chisel The chisel is complete (with an overall length of 103.5mm and a weight of 43.5g). The socket mouth is oval (with external dimensions of 19.6mm x 15.9mm and internally 16.4mm x 12.3mm) and there is no collar or mouldings and there are no attachment holes on the sides of the socket. The sides are near-straight, or slightly concave and the socket faces are straight and convergent to the blade (with a socket depth of 48.2mm). The blade is of rectangular section (15.1mm wide and 5.6mm thick beneath the socket) and the sides are gently convex and divergent to…
Created on: Tuesday 14th November 2023
Last updated: Tuesday 14th November 2023
Spatial data recorded.

Record ID: NMGW-6582F1
Object type: BROOCH
Broad period: ROMAN
County: Swansea
Workflow stage: Awaiting validation
An incomplete Roman copper-alloy umbonate brooch, dating from c. 100 to 250 AD. The brooch is elliptical or oval in plan, and measures 26.70mm long, 19.14mm wide and is 1.65 mm in thickness (excluding the hinge). The front of the brooch is domed and is decorated with inlayed concentric rings of red enamel triangles, which increase in size from the centre to the outer edge of the brooch. The central ring of enamel decoration is made up of nine inwards pointing red triangles around 1mm in height. Surrounding this is a second ring of red inward pointing triangles, many of which are pa…
Created on: Tuesday 5th September 2023
Last updated: Friday 19th January 2024
Spatial data recorded.

Record ID: NMGW-6571D4
Object type: SCISSORS
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation
An incomplete Post Medieval copper alloy fragment, likely from a pair of scissors or possibly a candle snuffer or tongs. Dating from c. 1600 to 1800 AD The object consists of the central joint or hinge, and a small portion of possibly a blade and handle. The central joint comprises of two flat circular plates, 13.7mm in diameter, it is decorated with a central punch surrounded by two incised concentric rings. The plates are now fused together but would have swivelled around a central rivet or pin.  From opposing points of the joint extend the lower parts of the blade and han…
Created on: Tuesday 5th September 2023
Last updated: Friday 19th January 2024
Spatial data recorded.

Record ID: NMGW-C87F84
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation
A copper alloy object of uncertain date, use, and completeness. The object consists of a spike, square in cross section and tapering to a point, it is 65.5mm long.  The top of the object measures 8.51mm by 8.54mm, it is broadly flat but somewhat uneven, possibly suggestive of a break.   The object is a mid-brown colour with areas of uneven green corrosion.
Created on: Tuesday 4th April 2023
Last updated: Wednesday 5th April 2023
Spatial data recorded. This findspot is known as 'Gower', grid reference and parish protected.

Record ID: NMGW-230AA9
Object type: COIN
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation
A complete medieval copper alloy Portuguese ceitil of Alfonso V (1438 -1464) Obverse: features a castle with three turrets, sitting on a three arched bridge with waves beneath, surrounded by a beaded border. The legend reads ALFONQ EDOMINO CEP Reverse: Shield, legend unclear.
Created on: Tuesday 28th March 2023
Last updated: Monday 1st May 2023
Spatial data recorded.

• 

  Image not taken

Record ID: NMGW-D1D308
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Awaiting validation
A complete Middle Bronze Age copper alloy spearhead dating from c. 1275-1150 BC. Dimensions: length 418.0mm; maximum width of blade 50.2mm; length of blade (excluding basal loops) 282.0mm; length of socket (including basal loops) 136.0mm; thickness of mid-rib (across centre) 16.9mm; external mouth diameter 24.0mm (side to side) by 24.9mm (front to back); internal mouth diameter 20.4mm (side to side) by 22.7mm (front-to-back); minimum depth of socket 265.0mm; weight 420.7g This is a complete spearhead of bronze, with projecting basal loops. The base of the blade is slightly angled to …
Created on: Wednesday 15th February 2023
Last updated: Wednesday 14th June 2023
Spatial data recorded. This findspot is known as 'Swansea Bay', grid reference and parish protected.

Record ID: NMGW-B3D9C3
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation
A complete copper alloy post medieval sailmaker's palm guard, or palm iron. The object is circular in plan (33.4mm diameter) with three drilled lugs protruding 5.4mm from the edge. The back of the object is flat, and the front has a flat rim with a central area that is slightly recessed and gently concave. The lugs are roughly equidistant. One of the lugs has a notch along the length of the front. There is a 26.3mm distance between the notched lug and each of the two plain lugs. There is 28.1mm between the two plain lugs. The lugs join to a rim (5.5mm high, and variable in w…
Created on: Sunday 16th October 2022
Last updated: Monday 12th December 2022
Spatial data recorded.

Record ID: NMGW-B37292
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation
An incomplete copper alloy Post Medieval sword belt fitting, dating from around the 16th - 17th century. The object consists of a flat plate with a tri-lobed top and a foliate incised design to the surface. At the bottom of the plate is a hook with a rounded terminal. Hanging from the hook is a suspension loop which has a horizontal break under the hole. The top of the fitting features a tri-lobed design, the side lobes being longer than the central lobe. Under the central lobe is an iron rivet (4.7mm in diameter). Below is a narrowed waist (9.6mm in width) which then expands (t…
Created on: Sunday 16th October 2022
Last updated: Monday 31st October 2022
No spatial data available.

Record ID: NMGW-8A5C25
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Awaiting validation
An Early Bronze Age bronze flat axe, of likely class 2D Halberton type (Needham 2017) dating to 2400BC - 2200BC. The axe is near-complete but with significant surface losses, and some corrosion. It has a surviving length of 96.2mm. The original blade edge has been lost and is now moderately rounded, with a surviving width of 51.28mm. From the blade edge the body of the axe gradually narrows in shape and curves inwards. The axe gradually gets thicker in the centre (with a maximum thickness of 9.94mm) and tapers off towards the butt, creating a broadly lentoid profile with sli…
Created on: Monday 19th September 2022
Last updated: Saturday 3rd June 2023
No spatial data available.

Record ID: NMGW-6B55DA
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation
A cast copper alloy knife end cap/terminal/pommel from a scale tang knife, dating to the late Medieval or early Post-Medieval period (15th to 16th centuries AD). The object is corroded but near complete. The design is irregular- a flattened oval sectioned base (which would have attached to the handle) bifurcated into two near symmetrical knops. Each knop is sub-rectangular in section and tapers slightly to flat ends. The outside edge of each end is upturned and projects outwards. Both ends are also decorated by four circular holes with square sectioned copper alloy rods inserted…
Created on: Tuesday 18th January 2022
Last updated: Friday 21st January 2022
Spatial data recorded.

Record ID: NMGW-EF3B50
Object type: LOCKET
Broad period: MODERN
County: Swansea
Workflow stage: Awaiting validation
An incomplete copper alloy locket of Victorian/modern date (1856-1922). The locket is circular in plan with a diameter of 26mm and a remaining thickness of 5.0mm. The locket is in poor condition comprising a thin copper alloy sheet loosely fitting within the larger, thicker locket base. The thin sheet is badly damaged, missing the original edges, and the surface is covered in corrosion. An engraved love heart enclosing letters W&H above letters CO preserves in the centre on one side. This indicates the locket was manufactured by Wightman & Hough Co. (W & H CO), established in AD 1856 …
Created on: Wednesday 12th January 2022
Last updated: Monday 17th January 2022
Spatial data recorded.

Record ID: NMGW-A5E7E7
Object type: BADGE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation
Lead - tin alloy boss possibly a medieval badge of 14th to 16th century date The boss appears to be complete (with a weight of 10.3g) and comprises a basal circular flange (4.1mm diameter) with a raised border and around a hemispherical centre (17.6mm diameter and 7.9mm deep). The central boss has cast decoration comprising a six-pointed star or flower, with a pellet in each of the lobes, near the top. Any moulding at the apex has been lost. The boss is solid and the rear is semi-finished with a depression around the centre. There is a clear casting seam running along the rear an…
Created on: Monday 15th February 2021
Last updated: Monday 15th February 2021
Spatial data recorded.

Record ID: NMGW-16767F
Object type: MOUNT
Broad period: ROMAN
County: Swansea
Workflow stage: Awaiting validation
Copper alloy anthropomorphic mount of uncertain date, possibly Roman The oval domed mount depicts a human head and appears to be near-complete but is now heavily corroded (with a length of 22.3mm, a width of 17.3mm, an overall depth of 13.2mm and a weight of 7.3g). The corrosion has removed much of the facial features although what remains is finely and carefully worked. The hair remains clear, defined by curvilinear grooved lines above and to the side of the brow. At the base of the brow a delicate groove appears to depict the eye brow and is above oval depressions with a raise…
Created on: Monday 8th February 2021
Last updated: Monday 8th February 2021
Spatial data recorded.

Record ID: NMGW-161C0E
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation
Post medieval copper alloy trade weight The weight is heavily corroded and the marks are now difficult to distinguish. The sword and ewer are discernible but the crowned letter is uncertain, possibly a letter G (George). The weight currently weighs 12.79g, equivalent to 0.451 ounce, probably originally a half-ounce weight, possibly under the Avoirdupois system. The weight is corroded with a dark-green patination.
Created on: Monday 8th February 2021
Last updated: Monday 8th February 2021
No spatial data available.

Record ID: NMGW-C256C0
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Awaiting validation
Early Bronze Age fragmentary bronze flat axe of uncertain type perhaps contemporary with Type Migdale axes as defined by Schmidt & Burgess (1981, p 35-44)[1], of Metalworking Assemblage III, corresponding to Needham’s (1996)[2] Period 2 -3 and probably dating to c. 2,200 – 1,900BC. The axe comprises a worn blade fragment (with a surviving length of 39.7mm and a weight of 63.6g). The break has occurs in antiquity across the thickest surviving part of the axe (where the axe has a width of 27mm and a thickness of 7.3mm). The sides are worn and corroded but appear to have been s…
Created on: Thursday 4th February 2021
Last updated: Thursday 4th February 2021
Spatial data recorded.

Record ID: NMGW-1CD116
Object type: BUCKLE
Broad period: MEDIEVAL
County: Swansea
Workflow stage: Awaiting validation
Medieval copper alloy buckle frame of 13 to 15th century date The cast buckle frame is missing any folded sheet plate it may have had and it’s pin and is of oval from (with a length of 20.7mm, a width of 23.8mm and a weight of 3.1g). The outside edge of the frame is widened with a notch for the pin. The frame is of rounded sub-rectangular section (with a thickness of 2.5mm – 3.1mm and a width of 2.3mm – 4.3mm). The rounded bar is off-set and of sub-rectangular section (2.7mm x 3.8mm). The min pin has left ferrous corrosion staining on the bar and outside edge of the frame. …
Created on: Wednesday 27th January 2021
Last updated: Wednesday 6th July 2022
Spatial data recorded.