Record ID: NMGW-D28B2C
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
A hammered gold sheet of uncertain date. The sheet has a maximum length of 51.4mm, width of 39.3mm, 0.7mm thick and weighs 14.76g. The sheet is lacking any diagnostic features so the use and date cannot be determined. Small percussion marks on the surface indicate the sheet was intentionally flattened before being deposited, discarded, or lost. Due to the uncertainty of the date, the object is not considered Treasure under the Treasure Act 1996.
Created on: Friday 2nd February 2024
Last updated: Friday 2nd February 2024
Spatial data recorded.

Record ID: NMGW-49AB5D
Object type: BUCKLE
Broad period: UNKNOWN
County: Monmouthshire
Workflow stage: Awaiting validation
A fragment of an unidentified cast copper alloy object, likely a buckle of uncertain date. The object is plano-convex in section, with a flat reverse and convex obverse. The object terminates in a break at both ends, one across what is likely the 10.4mm wide centre of the buckle frame, the object curves from this point to the other break at the side of the frame. The obverse face is decorated with an incised groove running parallel to the outer edge. The object has a smooth dark green patina covered with speckled brown and green pitting and concretions. The object is relatively undia…
Created on: Tuesday 22nd August 2023
Last updated: Tuesday 29th August 2023
Spatial data recorded. This findspot is known as 'Gobion fawr community', grid reference and parish protected.

Record ID: NMGW-2504E9
Object type: RING
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
A fragmentary cast copper alloy object, probably a fitting, of uncertain date. The object is half of a curved or circular fitting and is sub-triangular in section with a surviving overall length of 43.9mm. The surviving terminal is rounded and decorated with a small circular moulding (max thickness 5.0mm) and a small integrally cast knop/spike projecting outwards from the side. The object has an old break at the apex of the curve. The surviving original surface suggests the shallow central ridge was decorated with small notches. The reverse is flat and undecorated. XRF results show t…
Created on: Tuesday 8th August 2023
Last updated: Friday 2nd February 2024
Spatial data recorded.

Record ID: NMGW-24FBF9
Object type: RING
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
A fragmentary cast copper alloy ring, possibly from a harness, of uncertain date. The ring is missing over half of the hoop in old damage with surviving measurements 25.5mm long x 7.2mm max diameter. The ring is roughly D-shaped/sub-triangular in section with a shallow central ridge along the outer surface and small angular wear facets visible at the breaks. There is no visible evidence for surface decoration. It is difficult to determine function with so little remaining, but it may be a fragment of a harness ring. The metal has a smooth dark green mottled patina and weighs 6.51g. XR…
Created on: Tuesday 8th August 2023
Last updated: Friday 2nd February 2024
Spatial data recorded.

Record ID: NMGW-845F52
Object type: RING
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
A cast copper alloy object, probably a ring handle of indeterminate age. The ring is solid cast, oval in plan (68.9mm x 62.0mm) and teardrop-shaped in section with a rounder interna edge and a more pronounced external edge (ring width c.7.7mm wide x 4.2mm thick). The ring lacks any diagnostic features to estimate precise function or relative date. The metal has a brownish-green smooth patina with large areas of rough mid- to light-green corrosion and weighs 28.39g.  
Created on: Tuesday 13th June 2023
Last updated: Monday 19th June 2023
Spatial data recorded.

Record ID: NMGW-C87F84
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation
A copper alloy object of uncertain date, use, and completeness. The object consists of a spike, square in cross section and tapering to a point, it is 65.5mm long.  The top of the object measures 8.51mm by 8.54mm, it is broadly flat but somewhat uneven, possibly suggestive of a break.   The object is a mid-brown colour with areas of uneven green corrosion.
Created on: Tuesday 4th April 2023
Last updated: Wednesday 5th April 2023
Spatial data recorded. This findspot is known as 'Gower', grid reference and parish protected.

Record ID: NMGW-BECBD3
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Monmouthshire
Workflow stage: Awaiting validation
A rolled and folded lead sheet of uncertain dating, probably Roman to Modern (AD 43-1950). The object is roughly tubular in form but appears to have been an irregular shape prior to folding. The object is filled by lead carbonates and soil, and one corner has been folded over a segment of 0.5mm diameter copper alloy wire, with unidentified fibres present in some of the lead carbonate and soil fill. The outer surface of the object has tool marks- parallel lines likely representing the jaws of some pliers or tongs as well as some impressions that appear to be from twisted wire. The obj…
Created on: Tuesday 4th April 2023
Last updated: Tuesday 4th April 2023
Spatial data recorded.

Record ID: NMGW-9A852B
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Neath Port Talbot
Workflow stage: Awaiting validation
A cast lead disc of unknown function and date. The object is circular in plan measuring 18.1mm in diameter and weighs 879.1g. The object is 3.4mm thick in the centre and unevenly dished along the circumference reaching a maximum height of 22.3mm A similar object is recorded on the PAS database (NMGW-36A04D) although the present object does not have obvious hammer reticulation marks on the surface and was recovered as a single isolated find, rather than with a ‘lid’ as seen in NMGW-36A04D. Lead objects are difficult to date due to their lack of diagnostic features. A lead…
Created on: Monday 27th June 2022
Last updated: Wednesday 14th September 2022
Spatial data recorded.

Record ID: NMGW-E2C2AB
Object type: BEAD
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
A near-complete cast tin alloy bead of unknown date. The bead is roughly circular in plan and sub-oval in section with external diameter of 13.6 and 8.5mm thick. The central perforation is warped but the side with less warpage has an internal diameter of 5.8mm x 3.9mm. The bead lacks diagnostic characteristics so a definite date cannot be obtained, however two tin beads are recorded from Medieval (15th century) contexts and examples are described by Egan and Pritchard (2002: 315-316 no. 1584, 1585). The metal is a medium grey and shiny in places with a weight of 4.17g. References…
Created on: Monday 6th June 2022
Last updated: Thursday 16th June 2022
Spatial data recorded.

Record ID: NMGW-576028
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Neath Port Talbot
Workflow stage: Awaiting validation
An incomplete ?copper alloy object likely of Post Medieval to Victorian date (c. AD 1700-1900). The object is fractured on both ends, leaving a globular bead-shape decoration (13.8mm long, 11.8mm diameter). The object is possibly a furniture handle with traces of white metal coating on the outside. The metal is a mid grey patina and weighs 5.86g.
Created on: Monday 17th January 2022
Last updated: Saturday 12th February 2022
Spatial data recorded.

Record ID: NMGW-5754D1
Object type: FIGURINE
Broad period: UNKNOWN
County: Bridgend
Workflow stage: Awaiting validation
A fragmentary cast lead figurine probably neoclassical and post-medieval date (c.AD1750-1850). The figurine is represented by a bent leg broken above the knee and at the ankle with a surviving max length of 58.5mm, 18.6mm wide and max depth 26.6mm (from knee to break). The leg is hollow with a casting flash line on the back of the calf suggesting this figurine is Post-Medieval to Modern in date. A small lead plate c.24.2mm long x 11.3mm wide runs on the front of the leg from the middle of the shin to the break at the ankle and likely represents an attachment surface with the figurine …
Created on: Monday 17th January 2022
Last updated: Saturday 12th February 2022
Spatial data recorded.

Record ID: NMGW-55FF0E
Object type: VESSEL
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Two fragments of Pewter or copper alloy- one possible vessel rim. Little diagnostic but maybe a medieval or post medieval vessel. A fragment 46.4mm long, 19.8mmwide and a maximum of 1.5mm thick, weighs 5.07g. The fragment has a channel beaten in lengthways with flanking ridges. One long edge is thinner that the other- 0.9mm vs 1.3mm. Possible vessel rim, but every edge is a break, and no other diagnostic features. Form of the sheet gives little indication as to shape due to distortion. A fragment 33mm long, 19.1mm wide, maximum 2.7mm thick, weighs 6.42g. Every edge is a b…
Created on: Monday 17th January 2022
Last updated: Wednesday 6th July 2022
Spatial data recorded.

Record ID: NMGW-D53BCB
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
A complete stone or ceramic spindle whorl, weight, or gaming piece of uncertain date, possibly Roman to Medieval. The object is circular in plan and convex in profile with a diameter of 25.9mm, height of 18mm and weighs 13.99g. The circular central perforation penetrates the object thickest part of the object (18mm) with an internal diameter of 6.7mm. The object is finely made and evenly polished with a smooth even surface. The surface is undecorated and lacks diagnostic features, so it is not possible to securely ascribe a date. A small pebble is wedged inside one side of the perfora…
Created on: Monday 18th October 2021
Last updated: Monday 18th October 2021
Spatial data recorded.

Record ID: NMGW-AABB8D
Object type: WEIGHT
Broad period: UNKNOWN
County: County of Herefordshire
Workflow stage: Awaiting validation
Perforated stone weight of uncertain date possibly medieval The weight is of irregular rectangular form (93.9mm long, 66.6mm wide and weighing 150.5g), of variable thickness (with a maximum thickness of 19.5mm) and is made from a coarse-grained sandstone. The top edge and one of the side edges appear to be moderately rounded and are likely to be unmodified, while the other two edges are irregular and probably trimmed to the desired shape. The perforation is circular (10.6mm diameter) and is wider at one face, but appears to have been drilled rather than pecked. One face (convex) …
Created on: Wednesday 4th August 2021
Last updated: Wednesday 4th August 2021
Spatial data recorded.

Record ID: NMGW-57D6D3
Object type: INGOT
Broad period: UNKNOWN
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
A near-complete cast copper alloy ingot of possible Early Medieval date. The ingot is sub-oval in plan and section with straight sides and curved ends measuring 51.7mm in length and 12mm in width. Soft hammer marks are visible as irregularities in the thickness of the ingot. The thickest point of the ingot measures 5.8mm and tapers gradually towards the ends which measure 3.7mm and 4.1mm thick. The surface is plain and undecorated. The metal is a dark green patina with some spots of lighter green surface corrosion and weighs 20.32g. Similar objects are recorded on the PAS d…
Created on: Monday 19th July 2021
Last updated: Tuesday 7th September 2021
Spatial data recorded.

Record ID: NMGW-9D99C5
Object type: STYLUS
Broad period: UNKNOWN
County: Monmouthshire
Workflow stage: Awaiting validation
An incomplete probable copper alloy stylus of Roman or Medieval Date. The stylus is 86.5mm long and is bent, so the original would have been of greater length. The thickest part is c. 3mm square in section, with the top 31.5mm of the object expanding and flattening towards the broken upper end, which is 6.1mm wide and 1.3mm thick. This flattened part would be used to erase writing on a wax tablet. The lower broken end of the stylus is 2mm by 2.2mm thick, tapering from the thickest section. The stylus is broken at both ends badly corroded, with a rough, pitted dark green surface, showi…
Created on: Monday 28th June 2021
Last updated: Tuesday 29th June 2021
Spatial data recorded.

Record ID: NMGW-1F083A
Object type: STUD
Broad period: UNKNOWN
County: Monmouthshire
Workflow stage: Awaiting validation
A small copper alloy discoid plano-convex stud of unknown date. The top of the stud is slightly domed, and was once circular in plan. The underside of the stud is flat, with a single central tapering shank that ends in a break. The top of the stud is stamp decorated with a central octofoil floral motif surrounded by four ring and dot motifs that alternate with four subdivided sub-rectangular bars. The stamped decoration is executed unevenly. The object is covered by a dark green patina and part of the edge of the head of the stud is missing, as is the remainder of the shank. The stud …
Created on: Tuesday 22nd June 2021
Last updated: Tuesday 22nd June 2021
Spatial data recorded.

Record ID: NMGW-466775
Object type: KNIFE
Broad period: UNKNOWN
County: Powys
Workflow stage: Awaiting validation
A complete flint implement, probably a knife/scraper but may also be a flake with miscellaneous retouch. The object has a white speckled patination and invasive retouch on the lateral side with post depositional damage. Max length 72.1mm, width 22.3mm, 8.5mm thick, 9.3mm max depth and weighs 14.57g.
Created on: Wednesday 31st March 2021
Last updated: Wednesday 19th May 2021
Spatial data recorded.

Record ID: NMGW-DDA8DB
Object type: FLAKE
Broad period: UNKNOWN
County: Powys
Workflow stage: Awaiting validation
A flint flake, likely debitage, of unknown date. No sign of retouch is visible on the edges. The flake is 21.8mm long, max width of 13.4mm, 4mm thick and weighs 1.01g.
Created on: Friday 26th March 2021
Last updated: Wednesday 19th May 2021
Spatial data recorded.

Record ID: NMGW-3DBB53
Object type: VESSEL
Broad period: UNKNOWN
County: Monmouthshire
Workflow stage: Awaiting validation
Copper alloy vessel rim and handle fragment of uncertain date, possibly medieval The cast vessel is fragmentary, represented by a rim fragment (40.5mm long) and the upper part of the handle (40.5mm deep and weighing 49.2g), soldered together. The vessel rim has little curvature across its width, suggesting a vessel of sizeable diameter. The outside of the vessel is straight along its length (23.1mm surviving length) and has no decoration. The interior of the rim is rounded (with a vessel thickness of 4.7mm). The vessel handle is positioned level with the top of the rim and is per…
Created on: Monday 22nd February 2021
Last updated: Monday 22nd February 2021
Spatial data recorded.