Record ID: LEIC-ECF5B6
Object type: BROOCH
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A complete medieval copper alloy annular brooch, dating to c. AD 1200-1400. The frame is circular in plan and oval in section, there is no constriction for the pin. The pin remain and is bent around the frame. The brooch is undecorated. Diameter: 22.6 mm Thickness: 1.9 mm Weight: 2.2 g Reference: Egan and Pritchard (1991: 249) no. 1307.
Created on: Thursday 7th April 2022
Last updated: Thursday 5th May 2022
Spatial data recorded.

Record ID: LEIC-ECA974
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
An incomplete Early-Medieval copper-alloy pin, dating to c.AD 700 - 900. The globular pin head has a flattened top, the pin head is undecorated. Below the pin head sits a raised collar. Part of the shaft remains, it is circular in section and terminates in a worn break. Length: 31.2 mm Width: 7.1 mm Thickness (shaft): 1.8 mm Weight: 2.1 g
Created on: Thursday 7th April 2022
Last updated: Thursday 5th May 2022
Spatial data recorded.

Record ID: LEIC-EC822E
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
An incomplete Early Medieval copper-alloy small long brooch, dating to c.AD 450-550. Most of the head, one side knop and the upper bow remain. The pin side knops and lower bow are missing. The rectangular head plate is almost complete, fragments of its top edge are missing, a complete flat circular knop projects from it right side, a fragment of this remains on its left, it is uncertain whether the top edge had any decoration. The outer edge of the headplate is defined by incised lines. To the rear of the headplate is a small complete lug which would have secured the pin, Iron corrosi…
Created on: Thursday 7th April 2022
Last updated: Monday 6th June 2022
Spatial data recorded.

Record ID: LEIC-15B5EC
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
A Roman copper-alloy T-shaped brooch, dating to AD 50 - 150. Part of the pin and lower bow are missing. The wings are thin and cylindrical, they house the spring pin which has nine springs, four on one side, five on the other. The ends of the wings are decorated on the front face with a short incised vertical line. The bow is tapering with a pointed oval cross section. The head of the bow is raised, it tapers then widens again towards the catchplate The bow is decorated with a moulded central, longitudinal ridge. Part of the lower bow and catchplate are retained, but some is missing …
Created on: Tuesday 3rd November 2020
Last updated: Tuesday 10th November 2020
Spatial data recorded.

Record ID: LEIC-121D5E
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A Post-Medieval lead token, Powell Type 2, dating to AD 1500 - 1750. The token is circular in plan. The decorated face has a raised N and S, the S is reversed. The underside of the token is decorated with a crude lis, either side are a D and B. Diameter: 21.58 mm Weight: 5.3 g
Created on: Tuesday 3rd November 2020
Last updated: Thursday 18th March 2021
Spatial data recorded.

Record ID: LEIC-59C7F1
Object type: COIN
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A Medieval silver penny of Henry I (1000 - 1135), dating to AD 1125 - 1135. Quadrilateral on cross fleury type. Moneyer Kipping of Winchester. North (1994) Volume 1, p 198 no 871 BMC XV Diameter: 19 mm Weight: 1.35 g
Created on: Tuesday 13th October 2020
Last updated: Tuesday 13th October 2020
Spatial data recorded.

Record ID: LEIC-DCF08C
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Published
An incomplete Roman copper-alloy Colchester derivative, Polden Hill brooch, dating to AD 75 -150. The wings and most of the bow remain, the spring pin, lower bow and catchplate are missing. The cylindrical wings are hollow and the flat circular ends each have a small perforation which would have secured the sprung pin. The front of the wings are decorated with a deep diagonal moulded line located close to the bow. The top of the bow has a central projecting circular hook, which terminated in a point, the hook projects downwards towards the base of the bow. Surrounding the hook ar…
Created on: Wednesday 8th April 2020
Last updated: Thursday 16th April 2020
Spatial data recorded.

Record ID: LEIC-211063
Object type: BOOK FITTING
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
Post Medieval silver hinged fitting, 23mm long, 9mm wide and 2mm thick with a weight of 1.81g. The object is sub rectangular in form and rectangular in cross section. It consists of a circular cross sectioned hinge, complete with a bar. Below this is a rectangular 'collar' with two transverse linear depressions. Below this the object is recessed slightly then widens outwards gradually. It then turns sharply inwards and this point is it damaged. The upper surface has a bevelled edge and the reverse houses the remains of a rectangular cross sectioned fixing prong, positioned jus…
Created on: Wednesday 20th March 2019
Last updated: Wednesday 19th July 2023
Spatial data recorded.

Record ID: LEIC-0DAE33
Object type: FINGER RING
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
Roman ? silver gilt ring fragment, 11mm long, 8mm wide and 3mm thick with a weight of 1.24g. The object comprises about half the bezel of a signet type ring. It is triangular in form and D shaped in cross section. Its wide broken end has a curved recess to take an intaglio and the upper surface is decorated on each edge with a wide concave band which is gilded and inside this is a narrow incised line. These converge as the object narrows to its loop. This is probably matches by a similar one around the edge of the bezel. The object is very worn.
Created on: Tuesday 19th March 2019
Last updated: Wednesday 24th July 2019
Spatial data recorded.

Record ID: LEIC-933F6C
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
Medieval copper alloy strap fitting, 17mm long, 15mm wide and 3mm thick with a weight of 2.40g. The object is rectangular in form and cross section and has a cruciform central hole and cut away corners. Between the edge of the cruciform hole the outer edge there are rectangular recesses on one surface of three sides which would have accommodated small strap fittings, see NCL-CCD0F4.
Created on: Wednesday 13th March 2019
Last updated: Wednesday 13th March 2019
Spatial data recorded. This findspot is known as 'Bicester', grid reference and parish protected.

Record ID: LEIC-25218B
Object type: COIN
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
Medieval silver halfpenny of Richard II, London mint, 1377-99.
Created on: Friday 8th March 2019
Last updated: Friday 8th March 2019
Spatial data recorded. This findspot is known as 'Merton', grid reference and parish protected.

Record ID: LEIC-FC4AA6
Object type: COIN
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
Medieval silver voided short cross penny, moneyer Nichole at London, dating to 1236-47 (class 7c-8).
Created on: Wednesday 6th March 2019
Last updated: Wednesday 6th March 2019
Spatial data recorded. This findspot is known as 'Bletchingdon', grid reference and parish protected.

Record ID: LEIC-933E7E
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
Early medieval copper alloy strap end, 50mm long, 8mm wide and 3mm thick with a weight of 5.26g. The object is rectangular in form and cross section. Its upper half has a spilt end to house the strap and this is damaged. Below that the object has slightly rounded sides and it then tapers in width and becomes thicker, terminating in a possible animal head terminal? this is now extremely worn. The object is probably a Thomas class B1 or B2.
Created on: Thursday 7th June 2018
Last updated: Friday 8th June 2018
Spatial data recorded.

Record ID: LEIC-6762E7
Object type: COIN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
Post medieval silver half groat? of Charles I (AD 1625-1649).
Created on: Tuesday 5th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.

Record ID: LEIC-66C217
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
Post medieval lead cloth seal. 14mm in length, 12mm wide and 3mm thick with a weight of 1.91grams. The seal is circular and formed of two discs now incomplete which would have been joined by a short rectangular strip. Obverse inscription reads I?-/160-/ C N. This could be a match for the seal of Thomas Lane (TL) 1603 or Joshua Culey (IC) , 1606 Mayors of Norwich. Reverse image may be of a lion or a portculis? Egan, G. Provenanced Leaden cloth seals UCL Thesis 1987 p.177-8.
Created on: Tuesday 5th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded. This findspot is known as 'Oxfordshire', grid reference and parish protected.

Record ID: LEIC-669E3D
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
Group of four worn and incomplete Roman copper alloy radiates and/or Nummi dating to the period AD 215-410.
Created on: Tuesday 5th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.

Record ID: LEIC-668313
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
Roman copper alloy nummus of the House of Constantine dating to the period AD 330-335 (Reece period 17). Reverse type VRBSROMA wolf and twins.
Created on: Tuesday 5th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.

Record ID: LEIC-665E2A
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
Roman copper alloy nummus of Helena dating to the period AD 337-341 (Reece period 17). Reverse type PAX PVBLICA Pax with transverse sceptre and branch
Created on: Tuesday 5th June 2018
Last updated: Tuesday 28th August 2018
Spatial data recorded.

Record ID: LEIC-6632C7
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
Roman copper alloy nummus dating to the period AD 364-378 (Reece period 19). Reverse type GLORIAROMANORVM Emperor with standard dragging captive.
Created on: Tuesday 5th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.

Record ID: LEIC-65F7E0
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
Roman copper alloy nummus of the House of Constantine dating to the period AD 335-341 (Reece period 17). Reverse type GLORIA EXERCITIVS two soldiers standing either side of one standard.
Created on: Tuesday 5th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.