Back to simple search | Back to advanced search

    You searched for:

    • Institution: BUC

  • Thumbnail image of BUC-FF6074

Record ID: BUC-FF6074
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy early medieval plate brooch, dating from c. 5th to 6th century AD. The brooch is a discoidal in shape. There is a punched ring and dot motif running round the edge of the disc, with a central circular indentation. The reverse is not decorated. There is the remains of the sub circular pin hinge on one edge, with orange coloured iron staining surrounding this suggesting the pin was iron. On the opposite edge is the catch bar which is trapezoidal in shape, and has been folded over so the end touches the plate. The reverse has a dark green patina. The front of th…
Created on: Thursday 31st May 2018
Last updated: Thursday 31st May 2018
Spatial data recorded.


  • Thumbnail image of BUC-FF1233

Record ID: BUC-FF1233
Object type: BUCKLE
Broad period: MEDIEVAL
County: West Berkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy medieval annular buckle or brooch, dating from c. AD 1230-1400. The brooch is a circular loop in shape, with incised lettering running around the frame circumference. This is contained within a linear incised border on the outside and inside of the frame. There is a worn notch on one edge of the frame. On the reverse there is a circular copper alloy loop or attachment on opposite sides, with iron staining inside. This is the remains of the pin bar or pin. There is no decoration on the reverse. The buckle has a dark green patina, and measures 39.5mm in diamete…
Created on: Thursday 31st May 2018
Last updated: Thursday 31st May 2018
Spatial data recorded.


  • Thumbnail image of BUC-FE855D

Record ID: BUC-FE855D
Object type: FINGER RING
Broad period: ROMAN
County: West Berkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy Roman finger ring dating to AD 43-200. The bezel is oval in shape with two circular voids on either side. The bezel measures 11.4mm by 14.9mm. One of the voids contains blue glass or stone, in the other only the white green adhesive remains. Inbetween the voids is a diagonal incised line, and surrounding them following the edge of the bezel is an oval incised line. The shoulders curve away and inwards from the bezel, and narrow into the hoop. The hoop is circular in cross section. The ring has a light bronze gold colour, with patches of grey, it has been cleane…
Created on: Thursday 31st May 2018
Last updated: Thursday 31st May 2018
Spatial data recorded.


  • Thumbnail image of BUC-FCA32E

Record ID: BUC-FCA32E
Object type: JETTON
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy post medieval Nurenberg jetton, dating from 16th-17th centuries AD, of rose and orb type. The jetton is very worn.
Created on: Thursday 31st May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-FC83C6

Record ID: BUC-FC83C6
Object type: COIN
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman radiate or nummus dating to the period c. AD 260 - 402. Uncertain reverse type. Uncertain mint. The coin is worn and illegible, and the edges are irregular.
Created on: Thursday 31st May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-FC7762

Record ID: BUC-FC7762
Object type: COIN
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A worn copper-alloy Roman radiate of an uncertain emperor, dating approximately to AD 260-296. Uncertain reverse type possibly depicting a figure standing. Uncertain mint.
Created on: Thursday 31st May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-FBF6F4

Record ID: BUC-FBF6F4
Object type: COIN
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A silver medieval farthing of Edward II dating to c.1310-14, mint of London.
Created on: Thursday 31st May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-FBEB4C

Record ID: BUC-FBEB4C
Object type: COIN
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A silver medieval long cross half penny of Edward III of the third 'florin' coinage dating to 1344/5-51. Mint of London.
Created on: Thursday 31st May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-FBB623

Record ID: BUC-FBB623
Object type: BROOCH
Broad period: IRON AGE
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a late Iron Age copper alloy brooch, probably dating from c.200 BC- to AD 50. The fragment is part of a bow brooch, which is circular in cross section. The bow has a ninety degree bend, below this it is widens out slightly, and has three raised collars. After the bend the brooch curls into a circular loop, this is the remains of the spring. At the opposite end the bow narrows and flattens, curving slightly before ending in a worn break. The brooch has a light brown surface colour, with patches of light green showing through from underneath. It measures 36.5mm in length, 1…
Created on: Thursday 31st May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-FB733D

Record ID: BUC-FB733D
Object type: BROOCH
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a Roman copper alloy Colchester or Polden Hill type brooch dating to c. 1st century AD. The fragment consists of the head of the brooch, with the wings still in situ, these were C shaped in cross section. The bow of the brooch curves downwards from the head of the brooch, it is T shaped in cross section with a central ridge. The ridge becomes higher at the head of the brooch, with a ridge in the centre to hold the spring. There is a notch in the ridge before this. On the reverse the spring is held inside the wings, and is coiled in a circular shape. The coil is very degra…
Created on: Thursday 31st May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-FB463D

Record ID: BUC-FB463D
Object type: BROOCH
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman brooch of Hod Hill type, dating from 50-100 AD. The brooch has been folded over so the head is next to the catch plate of the brooch. On the head of the brooch is the remains of a hinge, inside is iron staining from the original hinge pin. Attached to this in the centre is the loop of the copper alloy pin, the rest of the pin is missing. There is a raised ridge below the hinge, the brooch then narrows before widening into a sub triangular section on the bow of the brooch. This has a raised border at the top, and a collared knop at the two outer points o…
Created on: Thursday 31st May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-FAEB02

Record ID: BUC-FAEB02
Object type: STUD
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A complete medieval copper alloy stud or mount dating from c. AD 1350-1400. The mount is domed in the centre, with six flattened petals projecting out around the edge. In the centre of the stud is a circular rivet hole with a seperate rivet contained within. The reverse is concave and hollow. The mount has a dark green patina and measures 14.2mm in diameter, 5.6mm in thickness, and weighs 0.79g. C.f. Read 2001, page 15, number 107.
Created on: Thursday 31st May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-D65614

Record ID: BUC-D65614
Object type: BUCKLE
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy medieval buckle and plate dating to c. AD 1350-1400. The buckle frame is D shaped, with two knops on the outer frame. In between these is a central constriction for the crudely grooved sheet roller. The frame is triangular in cross section, and bevelled on the inside edge. The pin bar is recessed and squared at either end, the pin is missing. The buckle plate is rectangular in shape, and smaller on the reverse. In the centre of the plate beside the pin bar is a circular hole for the pin. Just below this on either side are two more circular holes. This is repe…
Created on: Tuesday 29th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-D639E2

Record ID: BUC-D639E2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An almost complete copper alloy medieval buckle and plate, dating from c. AD 1350 - 1400.The buckle frame is D shaped with a triangular projection on the outer frame, this has a notch in the centre for the pin to sit. The frame is sub circular in cross section. The buckle plate is a sheet of copper alloy that loops round the pin bar, it is the same length on both sides, and is rectangular in shape. The plate narrows into two rectangular shaped loops around the pin bar, and has a rectangular recess in the centre for the pin, which is now missing. At the opposite attachment end is a circ…
Created on: Tuesday 29th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-D3AFBA

Record ID: BUC-D3AFBA
Object type: BUCKLE
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete medieval to post medieval copper alloy double loop buckle, dating from. The buckle is rectangular in shape, with one of the loops missing. The breaks are worn. On the outer frame of the complete loop the frame widens in a triangular shape in the centre. The inside of the frame is bevelled, and it is sub circular in cross section. The pin bar is trapezoidal in cross section, the pin is missing. The buckle has a light green patina. It measures 28.9mm by 28.7mm, and weighs 3.98g.
Created on: Tuesday 29th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-D3773C

Record ID: BUC-D3773C
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A strip of copper alloy from an unknown object, possibly part of a medieval buckle plate. The copper alloy sheet is rectangular in shape, at one end it terminates in three triangular projections. At the opposite end there is a small circular hole, possibly part of the pin notch. The strip is no longer flat and has been distorted. There is decoration in the form of incised lines, however the object is very worn and it is difficult to see what this originally depicted. The copper alloy has a dark green patina, and the object measures 32.2mm in length, 13.6mm in width, 1.4mm in thickness …
Created on: Tuesday 29th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-D2E99A

Record ID: BUC-D2E99A
Object type: COIN
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A silver medieval Venetian soldino of Antonio Venier, dating from AD 1382-1400. Doge and Lion of St Mark type 4, minted in Venice. The soldino was about the size of English halfpennies and was popular because of a contemporary lack of small change; soldini in fact occur as English finds more often than proper halfpennies of the period.
Created on: Tuesday 29th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-D2B2DB

Record ID: BUC-D2B2DB
Object type: BUCKLE
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy medieval double loop buckle, dating from c. AD 1270-1350. The buckle frame is rectangular in shape, with two retangular loops. On the outer frames of the loops there are incised diagonal lines. One of the bars of the outer frame is distorted. The frame is semi circular in cross section. The pin bar is slightly recessed, with the frame slightly curving inside to meet the bar.The pin bar is also semi circular in cross section. The pin is now missing. There is no decoration on the reverse which is flat. The buckle has a mid green patina, and measures 27.5mm in l…
Created on: Tuesday 29th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-D285BB

Record ID: BUC-D285BB
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead alloy bi-convex decorated spindle whorl (or weight) of uncertain date, but likely dating from the medieval to post medieval period, 1100-1800. The object is sub-circular in shape, and trapezoidal in cross-section. Both sides are decorated but very worn, there are possibly raised lines radiating out from the central hole. It measures 29.9mm in diameter and stands 17.3mm in height, and weighs 64.07g. The object has a central circular pierced hole measuring 8.3mm in diameter.
Created on: Tuesday 29th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of BUC-804795

Record ID: BUC-804795
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A complete medieval copper alloy strap fitting or loop, dating to c. AD 1330-80. The loop was originally trapezoidal in shape but has been distorted, there are two small internal triangular projections nearer the shorter bar. The bar of the loop is rectangular in cross section and is flat. It has a light grey patina, and measures 19.8mm in length, 18.0mm in width, and 2.2mm at maximum thickness. It weighs 1.40g. c.f. Read 2001, page 25, number 199.
Created on: Friday 25th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 7,880
Search server index: objects

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 16,016
  • Mean quantity: 2.032
  • Maximum: 5,248

Filter your search

1 - 20 of 7,880 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.