Back to simple search | Back to advanced search

    You searched for:

    • IdentifierID:PAS57DA6F0B001AE3
    • Sort:institution
    • County:Hampshire

  • Thumbnail image of WILT-9DF29A

Record ID: WILT-9DF29A
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy square coin weight dating to medieval or post-medieval period (AD 1066- AD 1750 of an uncertain type. The coin weight was originally decorated, but the evidence is rather unclear. On the superior surface is a circle with the unclear initials WDN, on the inferior surface is yet another circle, but further details are worn off and coloured with green patina. The weight is 14.63mm in height, and 15.07mm in width. It is 2.68mm in thickness and weighs in at 4.38g. Similar coin weghts are common on the PAS database (WILT-564819. WILT-619E0B). This is due to t…
Created on: Monday 14th November 2016
Last updated: Tuesday 6th December 2016
Spatial data recorded. This findspot is known as 'Tangley', grid reference and parish protected.


  • Thumbnail image of WILT-E7397B

Record ID: WILT-E7397B
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy harness pendant dating between the period AD 1300- AD 1400. The pendant is shield shaped in plan with an offset perforated loop extending perpendicularly from the top. The posterior surface of the pendant is undecorated, smooth and slightly concave, whereas the anterior surface is decorated with three chevrons decorated with red (gules) enamel. The design is only just visibly and is rather worn. Evidence of gilding remains in place. The harness pendant 46.94mm in length, 29.91mm wide (maximum) and weighs 14.90g. The coat of arms on the shield may…
Created on: Thursday 5th January 2017
Last updated: Tuesday 11th May 2021
Spatial data recorded.


  • Thumbnail image of WILT-E7563A

Record ID: WILT-E7563A
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy Roman nummus of the House of Constantine dating to the period AD 330-335 (Reece period 17). GLORIA EXERCITVS, reverse type depicting two soldiers holding two standards. Uncertain mint.
Created on: Thursday 5th January 2017
Last updated: Thursday 19th January 2017
Spatial data recorded.


  • Thumbnail image of WILT-E77235

Record ID: WILT-E77235
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy Roman nummus of the House of Constantine dating to the period AD 335-341 (Reece period 17). GLORIA EXERCITVS, reverse type depicting two soldiers holding one standard. Uncertain mint.
Created on: Thursday 5th January 2017
Last updated: Thursday 19th January 2017
Spatial data recorded.


  • Thumbnail image of WILT-4CB418

Record ID: WILT-4CB418
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy, double loop trapezoidal buckle dating to between AD c.1620- AD c.1680. The bands of the buckle bevel on the inside edge, and on each of the 8 angles (obtuse of acute), are pointed knops. The pin is securely attached to the central bar of the buckle, and moved freely at 360 degrees. The most prominent of the knops are the two which create a pointed triangle shape at its tips. The inferior surface remains undecorated, and so does the anterior surface, with exception to transverse grooves on the two opposite rounded knops. There is one grove on each knop and…
Created on: Tuesday 10th January 2017
Last updated: Thursday 19th January 2017
Spatial data recorded.


  • Thumbnail image of WILT-4E549A

Record ID: WILT-4E549A
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy, strap fitting, dating to the period AD 1600 to AD 1700. One of the objects end has a circular knop located at its tip. Attached to this is a rounded triangular shape. The edges from this shape narrow slightly and form a rectangular shape. Each shape is a different section to the fitting. From the rectangular section, follows open work of a lozenge shape with a small central circular perforation. The design follows back to the rectangular shape and finishes with the rounded triangle, but without the circular knop on its tip. The posterior of this fittin…
Created on: Tuesday 10th January 2017
Last updated: Wednesday 28th February 2018
Spatial data recorded.


  • Thumbnail image of WILT-4EDB43

Record ID: WILT-4EDB43
Object type: JETTON
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Nuremberg 'rose and orb' jetton of Hanns Kravwickel II dating to AD 1584-1635. Obverse depicts three crowns alternately with three lis around a central 8-petalled rose and with the legend HANNS KRAVWINCKEL. Reverse depicts an imperial orb surmounted by a cross pattee. The reverse legend is GOTES SEGEN MACHT REICH. Michael Mitchiner, M, 1988, Jetons, medalets & tokens: The Medieval Period and Nurember Volume One, BA Seaby Ltd, London, p 443, no 1555 and p 444, no 1568.
Created on: Tuesday 10th January 2017
Last updated: Thursday 19th January 2017
Spatial data recorded.


  • Thumbnail image of WILT-4F42B3

Record ID: WILT-4F42B3
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy fragment of an unidentifiable object of an uncertain date. The object is incomplete and has been deliberately broken. The surviving section has been folded in upon itself with two incomplete adjoinging perforations located at the break and the folded edge. The lower section terminated in a bevelled edge. The upper edge is incomplete with a rough edge, at the fold this section is smooth suggesting a deliberate cut before the remainder of the object was broken off. No decoration is visible on the smooth outer face, internally the object where visble is undecorated a…
Created on: Tuesday 10th January 2017
Last updated: Monday 23rd January 2017
Spatial data recorded.


  • Thumbnail image of WILT-4F6873

Record ID: WILT-4F6873
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy Roman radiate of Claudius II dating to the period AD 270-271 (Reece period 13). CONSECRATIO, reverse type depicting an altar. Uncertain mint.
Created on: Tuesday 10th January 2017
Last updated: Thursday 19th January 2017
Spatial data recorded.


  • Thumbnail image of WILT-4FF15B

Record ID: WILT-4FF15B
Object type: BROOCH
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A Iron Age or Roman copper alloy fragment of a strip bow brooch, (Aucissa derivative) dating to the 1st century AD. The fragment is the wings, a small part of the head and the bow. The head of the bow should roll downwards on a strip bow brooch, with this example the head rolls upwarda although this appears to be damage rather than design. The bow is decorated the two grooves, which are filled with tiny incisions. The grooves start at the widest point of the bow, and finish just before the bow narrows to the foot which has broken off. The bow wider near its wings, and progressively…
Created on: Tuesday 10th January 2017
Last updated: Thursday 19th January 2017
Spatial data recorded.


  • Thumbnail image of WILT-CA7AAA

Record ID: WILT-CA7AAA
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy fragment of a Roman trumpet brooch dating between the 1st and 2nd century AD. The loop, pin, lower bow foot and catchplate are missing. The head of the brooch is semi-circular in shape, and a fixture potentially a loop has broken off. The arched edge of the head has a fine groove boarder, and down the centre there is a vertical ridge, which follows down to the bow. There is only small fragment of the bow left, and it arches from the base of the head until the break just below the button. Just before the break there is a sub rectangular decorative design, which consis…
Created on: Monday 16th January 2017
Last updated: Thursday 19th January 2017
Spatial data recorded.


  • Thumbnail image of WILT-CABB5A

Record ID: WILT-CABB5A
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Published Find published
A copper alloy Roman radiate of Allectus dating to the period AD 293-296(Reece Period 14). (PROVID) AVG reverse type depicting Providentia facing left with baton (globe and cornucopiae). Mint unclear, but possibly London, S (A?)//[ML or MSL]. This coin has been considered for Sam Moorhead's corpus for RIC.
Created on: Monday 16th January 2017
Last updated: Thursday 10th August 2017
Spatial data recorded.


  • Thumbnail image of WILT-CB0548

Record ID: WILT-CB0548
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Published Find published
A copper alloy Roman radiate coin of Carausius, AD 286-93 (Reece Period 14), SALVS AVGGG, Salus standing right feeding snake held in arms. Mint of London, S P // MLXXI. RIC V, pt 2, p. 478, no. 161. This coin is included in Sam Moorhead's corpus for RIC.
Created on: Monday 16th January 2017
Last updated: Tuesday 17th January 2017
Spatial data recorded.


  • Thumbnail image of WILT-CB7041

Record ID: WILT-CB7041
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A silver early medieval continential Sceat, dating to the period AD C.695 to AD c.740 AD. Series E, variety G1. Spink: 790E. Reverse depicting standard with four lines and a central anulet.
Created on: Monday 16th January 2017
Last updated: Monday 23rd January 2017
Spatial data recorded. This findspot is known as 'Breamore', grid reference and parish protected.


  • Thumbnail image of WILT-CBB575

Record ID: WILT-CBB575
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver medieval farthing, possibly Edward I dating to the period AD 1300-AD 1310. London Mint. The farthing is inscribed EDWARDVS REX [...]. It has been suggested that the final letter may be an A or otherwise a star.
Created on: Monday 16th January 2017
Last updated: Monday 23rd January 2017
Spatial data recorded.


  • Thumbnail image of WILT-7FD9B6

Record ID: WILT-7FD9B6
Object type: BRIDLE BIT
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy late early-medieval bridle cheek piece with incised zoomorphic decoration, dating to the period AD 1000-1100. What remains is a flat surface plate, measuring 54.96mm in length, 26.85mm wide and 4mm thick, ending in what may have been a broken, broadly circular hoop on the left hand side from which the bit would have originally fitted. There are four perforations within of varying diameters and are broadly circular in shape, the largest measures 9.81mm in length and 6.55mm in width. To the left of the largest perforation is another, measuring 6.43mm in length…
Created on: Tuesday 14th March 2017
Last updated: Saturday 19th October 2019
Spatial data recorded.


  • Thumbnail image of WILT-80DB16

Record ID: WILT-80DB16
Object type: BRIDLE BIT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper-alloy medieval horse harness fitting, dating to the period AD 1100-1500. The fragment comprises of an intact hoop, 21.18mm in diameter, and a broadly rectangular attachment, measuring 25.84mm in width and 54.15mm wide. In total, the horse harness fitting measures in total 64.16mm in length, 63.54mm wide and 5.72mm thick. It is undecorated on both sides. The flat surface plate is 3.69mm thick, and has three flayed edges at the base with three grooved ridges giving an uneven and undulating texture. The flat surface plate extends further downwards to a bulbous, rid…
Created on: Tuesday 14th March 2017
Last updated: Thursday 20th April 2017
Spatial data recorded.


  • Thumbnail image of WILT-816639

Record ID: WILT-816639
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy, Roman T shape brooch, dating to the period AD 50-150. The fragment is compromised of the wings, head and the very top of the bow. The wings are cylindrical is shape and cross section, with two fine grooves surrounding each terminal. The terminals are closed off. On the posterior side of the wings, there is a central groove which exposes a very stunted pin head. The head of the bow arches upwards at an obtuse angle and is elaborately decorated. The top of the design is a very fine arched groove, and beneath it a series of 8 tiny horizontal triangles (fo…
Created on: Tuesday 14th March 2017
Last updated: Wednesday 12th April 2017
Spatial data recorded.


  • Thumbnail image of WILT-81C82A

Record ID: WILT-81C82A
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy post medieval Spanish coin weight, dating to the period AD 1500-1700. The weight is lozenge in shape, but with a central circular design on its obverse surface. The front face is decorated with a bundle of arrows. The reverse is flat and undecorated. The height of the weight is 18.08mm, the width is 16.99mm, the thickness is 6.05mm and the weight is 12.43g.
Created on: Tuesday 14th March 2017
Last updated: Wednesday 12th April 2017
Spatial data recorded.


  • Thumbnail image of WILT-91B037

Record ID: WILT-91B037
Object type: PIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy buckle pin, dating to the medieval to post medieval period AD 1400- AD 1700. The pin oval in cross section and would have attached itself to a central bar of a buckle by the open ended hooks. There is also a notable ridge (almost like a decorative boarder) on the main body of the pin, just below the attachment hook. The pins end is pointed, but fairly rounded. The entire object remains undecorated. The pin is 39.09mm in length, 3.26mm in diameter and 4.85g in weight.
Created on: Wednesday 15th March 2017
Last updated: Wednesday 12th April 2017
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 56
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 56
  • Mean quantity: 1.000
  • Maximum: 1

Filter your search

Institution

1 - 20 of 56 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.