Record ID: WILT-780687
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A complete copper alloy strap distributer, possibly dating to the post medieval period AD 1500- AD 1900. The object consists of a broadly oval loop and a rectangular loop offset at ninety degrees, between the loops is a central circular section consisting of three raised bands. The Broadly oval loop is 25.15mm in length internally and 19.5mm wide. The rectangular loop is 18.7mm wide and 6.75mm in length. Overall, the maximum length is 58.81mm the maximum width is 28.06mm and the weight is 35.97g.
Created on: Tuesday 24th January 2017
Last updated: Monday 20th February 2017
Spatial data recorded.

Record ID: WILT-88168F
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
A complete copper alloy Roman nummus of Crispus dating to AD 321 (Reece period 16). BEATA TRANQVILLITAS, reverse type depicting an altar inscribed VOTIS XX with a globe on top. Trier mint. RIC Vol VII no. 308.
Created on: Wednesday 25th January 2017
Last updated: Tuesday 14th February 2017
Spatial data recorded.

Record ID: WILT-88EBE6
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
A complete copper alloy Roman nummus of Constantine I dating to the period AD 322-323 (Reece period 16). BEATA TRANQVILLITAS, reverse type depicting an altar inscribed VOTIS XX with a globe on top. Trier mint. RIC Vol VII no. 368
Created on: Wednesday 25th January 2017
Last updated: Tuesday 14th February 2017
Spatial data recorded.

• 

  Image not taken

Record ID: WILT-891336
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
A complete copper alloy Roman nummus of the House of Constantine dating to the period AD 330-335 (Reece period 17), CONSTANTINOPOLIS Victory on prow reverse. Uncertain mint.
Created on: Wednesday 25th January 2017
Last updated: Tuesday 14th February 2017
Spatial data recorded.

Record ID: WILT-8972D4
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
A incomplete silver denarius of Faustina I dating to the period AD 138-161 (Reece period 7). AETERNITAS, reverse type depicting Fortuna standing left with globe in left hand, and rudder in right, Mint of Rome.
Created on: Wednesday 25th January 2017
Last updated: Tuesday 14th February 2017
Spatial data recorded.

Record ID: WILT-8C6FC5
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
A complete copper alloy Roman nummus of the House of Valentinian dating to the period AD 364-375 (Reece period 19) SECVRITAS REIPVBLICAE reverse type depicting Victory advancing left. Mint of Lyon or Arles.
Created on: Wednesday 25th January 2017
Last updated: Wednesday 1st March 2017
Spatial data recorded.

Record ID: WILT-8C8A62
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
A complete copper alloy Roman radiate of Carausius, dating to the period AD 286-293, (Reece period 14). Uncertain reverse type depicting a standing figure. Uncertain mint.
Created on: Wednesday 25th January 2017
Last updated: Thursday 2nd March 2017
Spatial data recorded.

Record ID: WILT-8CB553
Object type: COIN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A copper alloy post-medieval halfpenny of William III dating to the period AD 1694 - AD 1702 . London mint. Spink: 3554-3556.
Created on: Wednesday 25th January 2017
Last updated: Wednesday 1st March 2017
Spatial data recorded.

Record ID: WILT-8CE0FA
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
A copper alloy Roman radiate of Victorinus dating to the period AD 269-271 (Reece period 13). INVICTVS, reverse type depicting Sol running left, holding globe and whip. Gallic mint.
Created on: Wednesday 25th January 2017
Last updated: Thursday 2nd March 2017
Spatial data recorded.

Record ID: WILT-A1FAB7
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
A copper alloy Roman radiate of nummus of an uncertain ruler dating to the period AD 260- AD 402. Uncertain reverse type and mint.
Created on: Thursday 26th January 2017
Last updated: Thursday 23rd February 2017
Spatial data recorded.

Record ID: WILT-A24B67
Object type: BUCKLE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy D shaped single loop buckle dating to the period AD c.1250-AD c.1450 The frame of the buckle does not taper, and stays the same width and thickness. The pin does move freely 180 degrees from the buckle and its attachment. The entire buckle remains undecorated, but the frame uniquely dips itself inwards at the back and then protruded outwards to create the pin bar. Only a fragment of the pin survives, but it is evident that in order to stay intact, the material was wrapped around the back bar. Despite this, the pin does freely move across the bar, and…
Created on: Thursday 26th January 2017
Last updated: Thursday 23rd February 2017
Spatial data recorded. This findspot is known as 'Winsley', grid reference and parish protected.

Record ID: WILT-F48826
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Swindon
Workflow stage: Awaiting validation
An incomplete cast copper alloy D shaped double loop buckle dating to the period c. AD 1550 - c.1650. The frames edges remain even are rather fine and do not bevel. The buckle has moulded roundels on the outer edge of each loop, and at either end of the strap bar. On the roundels on the both the outer edges is a flower design. The pin majority of the pin is missing, but the attachment end is visible, but highly corroded. The buckle does not lie flat, neither does it balance on its central strap bar. This is due to the inward bend of both loops. Overall, the buckle is 43.21mm in…
Created on: Monday 30th January 2017
Last updated: Tuesday 7th February 2017
Spatial data recorded.

Record ID: WILT-F55632
Object type: BELL
Broad period: POST MEDIEVAL
County: Swindon
Workflow stage: Awaiting validation
A complete copper alloy post medieval crotal bell dating to the AD 1600 to AD 1700. The bell is spherical in cross section with a rectangular suspension loop at the top. In the top half of the sphere, there are two perforations which have been cast out on either side of the loop. Around the circumference, there is a raised ridge. The lower half of the bell has a long canal opening ending in a perforation at each end, below the circumferential ridge. The decoration appears to be in the form of the sun burst design. This is clearly visible on the lower half of the hemisphere but less…
Created on: Monday 30th January 2017
Last updated: Tuesday 7th February 2017
Spatial data recorded.

Record ID: WILT-07742E
Object type: SPUR
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete copper alloy, cast post medieval rowel spur dating to the AD 1600- AD 1700. The spurs neck is short with a recess to hold the rowel which is missing. Iron corrosion is visible within the recess. There is simple decoration on the neck which consists of two fine grooves, located on the proximal end. The neck is attached to the sides by a circular section. The sides of the spur are wider at its central point, and then tapers and narrows as it reaches the terminals. Decoration is visible on the sides, which is a continuous pattern of fine grooves which create a lozenge sh…
Created on: Tuesday 31st January 2017
Last updated: Monday 13th February 2017
Spatial data recorded. This findspot is known as 'Ogbourne St. George', grid reference and parish protected.

Record ID: WILT-079ED4
Object type: COIN
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An complete medieval silver penny of an uncertain ruler dating to the period AD 1351-1509. Uncertain mint. The coin appears to be double struck.
Created on: Tuesday 31st January 2017
Last updated: Monday 13th February 2017
Spatial data recorded.

Record ID: WILT-07EC32
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Wiltshire
Workflow stage: Awaiting validation
A lead object of uncertain purpose and date. The object is semi cylindrical in shape as it has a flat base and has been purposefully filled with a form of ceramic, possibly clay. Around the central surface of the object are two fine grooves which go all the way around the object. One end is closed off by lead with a broadly D shaped perforation, whilst the other remains open, exposing the ceramic filling. The object is 11.43mm in length, 13.81mm in width, and 10.89 in thickness. It weighs 12.94g.
Created on: Tuesday 31st January 2017
Last updated: Monday 13th February 2017
Spatial data recorded. This findspot is known as 'Ogbourne St George', grid reference and parish protected.

Record ID: WILT-092AE7
Object type: BROOCH
Broad period: IRON AGE
County: Wiltshire
Workflow stage: Awaiting validation
A fragment of an Iron Age La Tene type I brooch dating to the period c.400- c.200 BC. The fragment consist of a part of the head, the bow and part of the foot. The head comprises of the ends point of the bow and is thinner compared to the rest of the bow. The fragment bends as a right angle and immediately increases in thickness at the angle. The bow is smooth, cylindrical in cross section and gradually narrows and tapers to the foot. The foot bends at an obtuse angle and flicks out at its tip. The whole fragment remains undecorated. The fragment weighs 8.67g, is 52.77mm in leng…
Created on: Tuesday 31st January 2017
Last updated: Monday 13th February 2017
Spatial data recorded. This findspot is known as 'Ogbourne St. George', grid reference and parish protected.

Record ID: WILT-09BFA3
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A complete copper-alloy early medieval stirrup terminal, dating to the period AD 1000-1100 The entire terminal slants at angle, following the typical shape of a stirrup and the top end is more bulbous than the rest of the object. To section off this end, there is a very slightly dents inwards and follows downwards with parallel edges. The terminals end follows suit with the top as it bulbs outwards, and slightly dents inwards. The edges gradually narrows inwards and join together at a rounded point. The terminal is decorated in the form of a zoomorphic beast. The nose, snout and ey…
Created on: Tuesday 31st January 2017
Last updated: Friday 20th December 2019
Spatial data recorded. This findspot is known as 'Ogbourne St. George', grid reference and parish protected.

Record ID: WILT-0A5BCF
Object type: RING
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A copper alloy medieval to post-medieval ring dating to the period AD c. 1100-1650. The ring is plain, circular and D shape in cross section. The edges are even, with the exception of an occasional dent. The attachment of the ring is an iron of which is somewhat corroded. The pin is securely attached by being wrapped around the loop. The wrap is not complete and the pin can move freely around the circumference of the loop. The diameter of the hoop is 25.08mm and the approximate length of the lug is 11.56mm. Overall, the handle and lug weigh 3.29g. From similar rings across th…
Created on: Tuesday 31st January 2017
Last updated: Monday 13th February 2017
Spatial data recorded. This findspot is known as 'Ogbourne St. George', grid reference and parish protected.

Record ID: WILT-0B19AA
Object type: TILE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A fragment of a medieval coarse ware tile, dating to the period AD 1250 - AD 1300 The fragments manufactured with an evident grog temperate with very little inclusions. The fragment has oxidised well as the dominant colour is orange, but there is also a visible reduced dark grey core. The design of the tile is inlaid, and it can be suggested that this was most likely achieved when the clay was in a plastic state. The design is the lower part of a breed of bird. The lower part of the birds body is visible, and there are two legs, one of which is higher than the other, mostly like…
Created on: Tuesday 31st January 2017
Last updated: Tuesday 7th February 2017
Spatial data recorded.