Back to simple search | Back to advanced search

    You searched for:

    • IdentifierID: PAS56DFF69B001A22
    • Workflow: Record ready for publication
    • Sort: updated

  • Thumbnail image of HAMP-D995D2

Record ID: HAMP-D995D2
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete asymmetrical Roman plate brooch, dating to the period AD 100-250. It is incomplete insofar as the pin is missing, part of the catchplate has broken and one of the knops has partially broken off. The brooch measures 39.02mm in length and 24.74mm at maximum width. Behind the catchplate is a trefoil protrusion, a small central triangle with an oval area to either side: at the centre of each of this is a stamped ring-and-dot. Beyond are two curving ribs in a triangular fashion, a recessed lozenge shape between, 8.82mm in length and 9.34mm wide. This may have contained enamel…
Created on: Monday 6th March 2017
Last updated: Thursday 7th February 2019
Spatial data recorded. This findspot is known as 'Buriton', grid reference and parish protected.


  • Thumbnail image of WILT-C46FB5

Record ID: WILT-C46FB5
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman nummus, probably of the House of Constantine, probably dating to AD 330-361 (Reece period 17-18). Uncertain reverse type. Mint of Lugdunum.
Created on: Friday 2nd November 2018
Last updated: Tuesday 4th December 2018
Spatial data recorded.


  • Thumbnail image of HAMP-2F7BD6

Record ID: HAMP-2F7BD6
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval silver open thimble of probable 17th century date. The body of the thimble is formed from a strip of sheet metal, 0.74mm thick, wrapped around to form a cylinder. The two ends no longer join and leave a gap which measures 0.48mm at the top and 1.98mm at the base. In shape, the cylinder tapers towards the top. The thimble is now squashed into an irregular sub-oval. It may have originally had a domed top. The inner surface of the cylinder is undecorated except for a maker's mark, a ligated AB. The outer surface is decorated with lines of circular punches with a plain ban…
Created on: Wednesday 9th November 2016
Last updated: Wednesday 28th November 2018
Spatial data recorded. This findspot is known as 'Froxfield', grid reference and parish protected.


  • Thumbnail image of WILT-C41E1F

Record ID: WILT-C41E1F
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper-alloy barbarous radiate dating to the period AD 275-285 (Reece period 14). The reverse appear to be a brockage. Uncertain mint.
Created on: Friday 2nd November 2018
Last updated: Friday 23rd November 2018
Spatial data recorded.


  • Thumbnail image of WILT-C488B7

Record ID: WILT-C488B7
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper-alloy barbarous radiate dating to the period AD 275-285 (Reece period 14). Uncertain reverse type and mint.
Created on: Friday 2nd November 2018
Last updated: Thursday 22nd November 2018
Spatial data recorded.


  • Image not taken

Record ID: WILT-C3DAC2
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper-alloy nummus or radiate of an uncertain ruler, dating to AD 260-402. Uncertain reverse type and mint.
Created on: Friday 2nd November 2018
Last updated: Friday 2nd November 2018
Spatial data recorded.


  • Image not taken

Record ID: WILT-C38853
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper-alloy nummus of the House of Valentinian, dating to AD 364-378 (Reece Period 19). SECVRITAS REIPVBLICAE reverse type, depicting victory advancing left with wreath and palm. Uncertain mint.
Created on: Friday 2nd November 2018
Last updated: Friday 2nd November 2018
Spatial data recorded.


  • Thumbnail image of HAMP-9A3655

Record ID: HAMP-9A3655
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete gilded silver mount, now in two pieces. It is broadly rectangular in shape and hollow to the reverse, filled with a white concretion that is hard and apparently brittle, with traces of a red colour throughout. The back-plate is missing. The front of the mount is decorated with four triangular cells, the central two being isosceles triangles with one inverted, and the outer two being right-angle triangles placed in opposing corners. The cells are inlaid with coloured glass or gemstone, the corner pieces being dark orange-yellow in colour and the central pair being greenis…
Created on: Tuesday 7th February 2017
Last updated: Wednesday 31st October 2018
Spatial data recorded. This findspot is known as 'Martin', grid reference and parish protected.


  • Thumbnail image of HAMP-64339D

Record ID: HAMP-64339D
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete buckle frame of probably late early-medieval to early medieval date (c. 1000-1200). It is triangular in shape consisting of two outside edges and the bar. Extensions of the frame either side of the bar, now terminating in old breaks, suggest these originally extended, perhaps into another loop of similar shape. The frame is oval in cross-section with the addition of a ridge at the centre of the two outside edges. This is moulded into a row of single knops with worn grooves between. The oval-sectioned frame behind has similar moulded and grooved decoration in alignment wit…
Created on: Tuesday 18th October 2016
Last updated: Tuesday 30th October 2018
Spatial data recorded. This findspot is known as 'Shalbourne', grid reference and parish protected.


  • Thumbnail image of WILT-C90BFB

Record ID: WILT-C90BFB
Object type: COIN
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A silver medieval penny of Edward I, dating to the period AD 1280-1289. EDW R ANGL DNS HYB, forward facing bust, CIVITAS LONDON reverse type with solid long cross, three pellets in each quadrant. Classes 3g-4a2 inclusive. There is a small chip at 7 o'clock, this is possibly due to a piercing being torn. The diameter of the piercing before it tore is 1.44mm.
Created on: Tuesday 10th October 2017
Last updated: Friday 19th October 2018
Spatial data recorded.


  • Thumbnail image of WILT-C9A18D

Record ID: WILT-C9A18D
Object type: COIN
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A silver medieval halfpenny of Edward IV, dating to the period AD 1471-1483 (second reign). EDWARD DI GRA REX ANGL Z FRANC DNS HIBERNIE, forward facing bust, CIVITAS LONDON reverse type with solid long cross, three pellets in each quadrant. North 1608, p89. (North, JJ, 1991, English Hammered Coinage, Vol 2, p 89, no 1608). There is a small hole in the coin, on the top left of the crown, but the irregular shape and placement does not indicate this was a purposeful piercing to alter the use of the coin.
Created on: Tuesday 10th October 2017
Last updated: Friday 19th October 2018
Spatial data recorded.


  • Thumbnail image of HAMP-2773FB

Record ID: HAMP-2773FB
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete early early-medieval (Anglo Saxon) copper-alloy pin from Type F penannular brooch, dating to the period 410-700. The pin's loop is in the form of a hollow cylindrical or drum-shaped element, presumably cast as one with the shaft. The loop is circular in cross-section and measures 8.41mm in diameter and 11.07mm in length. It is 1.89mm thick. There are prominent rims at either open end, a wide furrow next to each and at the centre two ridges to either side of a raised area. Where the shaft extends from the loop, this central raised area is widest, the two ridges to either side…
Created on: Thursday 15th December 2016
Last updated: Monday 1st October 2018
Spatial data recorded.


  • Thumbnail image of WILT-6770A5

Record ID: WILT-6770A5
Object type: BUCKLE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A nearly complete cast copper alloy medieval pin, probably from an annular brooch or buckle, c. 14th century AD. The pin is 50.73 mm in length and has an oval cross-section that tapers over its length to a blunt point with concave wear from contact with the frame. The attachment end consists of an incomplete open loop. Adjacent to the loop on the upper face is a raised moulding with no discernable pattern or design. The pin weighs 6.81g and has a olive-green colour and patina. A very similar pin is shown in Egan: Dress Accessories 1150-1450 (2002) p115; No. 547 from a context which is…
Created on: Thursday 7th April 2016
Last updated: Monday 1st October 2018
Spatial data recorded.


  • Thumbnail image of WILT-67A729

Record ID: WILT-67A729
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete annular single looped Medieval buckle dating to the period c. AD 1270-1400. The undecorated buckle has a plain circular frame and an oval section, with no constriction present for the pin to rest in.The pin itself has been cast with an open loop in order to more easily attach it to the frame and shows a transverse ridge just under the loop. The buckle is completely undamaged and measures 41.54mm in diameter and 10.56mm in thick, the pin is 41.47 in length and the entire buckle weights 16.44. Egan illustrates similar buckles (Egan and Pritchard 1991, 58, no. 36) which are d…
Created on: Thursday 7th April 2016
Last updated: Wednesday 22nd August 2018
Spatial data recorded.


  • Thumbnail image of HAMP-206688

Record ID: HAMP-206688
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete medieval copper-alloy buckle with integral plate, dating to the period 1200-1400. From the end opposite to the frame the remains of two hooks extend. The buckle measures 39.46mm in length and 15.29mm at its widest. The thickness of the buckle is 2.17mm, and in total it weighs 3.39g. The buckle is complete except for missing its pin and at least one of the hooks. The presence of iron oxide in a piercing in the plate just behind the frame indicates that the pin was made of iron. The overall patina of the buckle is a light green, and there are traces of gilding. The end opp…
Created on: Tuesday 8th November 2016
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Froxfield', grid reference and parish protected.


  • Thumbnail image of HAMP-CD9F31

Record ID: HAMP-CD9F31
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval/ post-medieval rectangular double-looped buckle frame complete with sheet pin, dating to the period 1200-1700. The frame has been bevelled on the outside, measuring 29.29mm in length and 19.75mm in width. Both loops are angled upwards. The frame is 3.07mm in thickness. The pin is D-shaped in cross-section, pointed at the tip and curling around the bar at the other end. The pin measures 19.11mm in length and 3.39mm in width. In total, the buckle weighs 3.68g. There is a buckle similar to this in Whitehead (1996), p75, no.464. The buckle has a dark green patina.
Created on: Tuesday 11th October 2016
Last updated: Thursday 16th August 2018
Spatial data recorded. This findspot is known as 'Froxfield', grid reference and parish protected.


  • Thumbnail image of HAMP-606744

Record ID: HAMP-606744
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete medieval single loop buckle, dating to the period c. 1250-1450. It is missing its pin. This buckle has an oval frame, measuring 22.12mm in length and 14.04mm in width. The outside edge is 4.02mm thick and is decorated with eight transverse grooves. The bar is thinner, measuring 2.09mm in thickness. Two moulded knops project from either end of this bar, with one transverse incision on the inside of each knop. Traces of a grey substance on both faces of the buckle suggest possible traces of a whilte metal coating. There is no further decoration on either side of the buckle.…
Created on: Tuesday 18th October 2016
Last updated: Thursday 16th August 2018
Spatial data recorded. This findspot is known as 'Whitchurch', grid reference and parish protected.


  • Thumbnail image of HAMP-649E01

Record ID: HAMP-649E01
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A late medieval/ early post-medieval (1400-1700) incomplete D-shaped buckle with ornate outside edges, possibly from a spur and missing its (probably iron) pin. From the curved edge extends a protrusion consisting of an isoceles triangle balanced upon a small rectangle, balanced upon a circle. At the oppisite end is a rectangular edge with four equidistant transverse grooves, flanked at the inside edge by a pair of vertical grooves. At the centre is a bar for the pin; a knop extends to either side of the frame at the ends. The underside of the buckle is undecorated and the bar carries …
Created on: Tuesday 18th October 2016
Last updated: Thursday 16th August 2018
Spatial data recorded. This findspot is known as 'Shalbourne', grid reference and parish protected.


  • Thumbnail image of HAMP-1FB65B

Record ID: HAMP-1FB65B
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete medieval copper-alloy composite buckle with spacer plate, dating to the period AD 1200-1400. The buckle is in two pieces, and is incomplete as it is missing one arm of the integral forked spacer, as well as c. one quarter of the buckle frame. The pin is also missing. The buckle has an oval lipped frame, with the outside edge forming a triangular point at the centre and a notch for the pin. The frame is 1.67mm thick, except at the triangular point where it is 3.39mm thick. What remains of the integral forked spacer plate is 33.19mm in length and 9.99mm wide, tapering down …
Created on: Tuesday 8th November 2016
Last updated: Thursday 16th August 2018
Spatial data recorded. This findspot is known as 'Froxfield', grid reference and parish protected.


  • Thumbnail image of HAMP-B04F77

Record ID: HAMP-B04F77
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete medieval single loop buckle frame and plate, dating to the period 1250-1450. It is a D-shaped frame with offset, narrowed bar, from which the pin and folded sheet plate are attached. The buckle and plate measure together 41.34mm in length and 21.13mm in width. The buckle, without the pin and plate, measures 18.04mm in length and 21.13mm wide. The decoration on the outside edge is five ridges and recesses in between. Where the pin comes to rest a recess has been carved within the central ridge, so that there are five recesses and five ridges. This ridge and recess decoration…
Created on: Wednesday 8th February 2017
Last updated: Thursday 16th August 2018
Spatial data recorded. This findspot is known as 'Owslebury', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 682
Search server index: asgard

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 730
  • Mean quantity: 1.070
  • Maximum: 16

Filter your search

1 - 20 of 682 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.