Back to simple search | Back to advanced search

    You searched for:

    • IdentifierID: PAS56DFF69B001A22
    • Object type: BROOCH

  • Thumbnail image of WILT-C38071

Record ID: WILT-C38071
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman Crossbow brooch, dating to the period c. AD 290-400. It is incomplete insofar as only approximately half of the upper body and the lower body extending to (but not including) the foot survives. All that remains measures 55.19mm in length, 26.36mm in width, 6.52mm thick for the upper body and 7.92mm for the lower body, tapering to a point after 37.13mm. There is a distinctive split in this tubular lower body, in which the now missing pin would have been contained. At the very bottom of the brooch, there is one ring-and-dot, broadly central, indicating perhaps that…
Created on: Wednesday 15th November 2017
Last updated: Friday 24th November 2017
Spatial data recorded.


  • Thumbnail image of WILT-896D1E

Record ID: WILT-896D1E
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy tinned Roman Hod Hill brooch, dating to the period AD 43-75. It is incomplete insofar as one wing, the spring mechanism and the pin are all missing. The brooch measures 34.08mm in length and 8.61mm in width, though the missing wing would have made the original width much wider than it is now. The wings taper inwards to the top of the body, where there is a ridge, and measures 4.89mm in width. After this the body tapers slightly outwards, but then tapers inwards gradually until a horizontal ridge, which connects the body to the foot and catchplate. There is a…
Created on: Tuesday 31st October 2017
Last updated: Thursday 2nd November 2017
Spatial data recorded.


  • Thumbnail image of WILT-8BD35C

Record ID: WILT-8BD35C
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An almost complete copper-alloy Roman trumpet brooch, dating to the period AD 75-175. It is complete except for the lower half of the pin which is missing. The brooch measures 73.91mm in length, 20.65mm at maximum width and weighed 23.45g. There is a small headloop at the top of the brooch, with a piercing measuring 2.54mm in diameter. From here the headloop extends into a rimmed edge, which extends downwards to form a semi-circle. Behind this is the hinged pin. The top half of the body of the brooch measures 22.85mm, extending from the semi-circular rim down to the ridged middle. A…
Created on: Wednesday 26th July 2017
Last updated: Monday 21st August 2017
Spatial data recorded.


  • Thumbnail image of WILT-92220C

Record ID: WILT-92220C
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy Roman Penannular brooch, dating to the period AD 43 - 410. It is circular, measuring 52.02mm in diameter and has a thickness of 5.25mm. The frame is tapers slightly inwards in width until the terminals, which fold back on themselves and expand to large, rounded knops, one either side, at the end of the terminals. Decoration on the frame itself is two lines of circular punches, running parallel to one another up until the terminals, where there is no further discernible decoration. The two lines of parallel circular punches is present on the back of the brooch a…
Created on: Thursday 8th June 2017
Last updated: Tuesday 13th June 2017
Spatial data recorded. This findspot is known as 'Bromham', grid reference and parish protected.


  • Thumbnail image of WILT-6A8A07

Record ID: WILT-6A8A07
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Published Find published
An incomplete copper-alloy zoomorphic Roman plate-brooch, dating to the period AD 100-200. It depicts a bird, possibly a peacock, measuring 35.04mm in length and 33.63mm wide. It is incomplete insofar as the pin is missing. The beak is short, measuring 4.19mm in length and 2.81mm in width, extending to a raised brow or eyesocket, though any decoration that once may have been there has since gone. A forked plume extends from this raised ridge, measuring 4.44mm in length and 3.29mm in width, before widening to 4.34mm. From the head and plume the brooch tapers to a fine neck with a slight…
Created on: Tuesday 6th June 2017
Last updated: Tuesday 12th February 2019
Spatial data recorded. This findspot is known as 'Bromham', grid reference and parish protected.


  • Thumbnail image of WILT-695751

Record ID: WILT-695751
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Published Find published
An incomplete copper-alloy zoomorphic Roman plate-brooch, dating to the period AD 100-200. It depicts a water bird, possibly a duck, with a long beak, body and head projecting from a flat base which concealed the pin and catchplate. It is incomplete insofar as the pin is missing. The head of the bird has a long, tubular beak, measuring 2.93mm in width and 13.21mm in length, and as with the rest of the brooch appears to be undecorated. However, the patina of the brooch is quite shiny, possibly indicating tinning. The neck curves back into the narrow body, measuring 8.52mm wide. The broo…
Created on: Tuesday 6th June 2017
Last updated: Tuesday 12th February 2019
Spatial data recorded. This findspot is known as 'Cherhill', grid reference and parish protected.


  • Thumbnail image of HAMP-D995D2

Record ID: HAMP-D995D2
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete asymmetrical Roman plate brooch, dating to the period AD 100-250. It is incomplete insofar as the pin is missing, part of the catchplate has broken and one of the knops has partially broken off. The brooch measures 39.02mm in length and 24.74mm at maximum width. Behind the catchplate is a trefoil protrusion, a small central triangle with an oval area to either side: at the centre of each of this is a stamped ring-and-dot. Beyond are two curving ribs in a triangular fashion, a recessed lozenge shape between, 8.82mm in length and 9.34mm wide. This may have contained enamel…
Created on: Monday 6th March 2017
Last updated: Thursday 7th February 2019
Spatial data recorded. This findspot is known as 'Buriton', grid reference and parish protected.


  • Thumbnail image of HAMP-A03771

Record ID: HAMP-A03771
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Published Find published
An incomplete copper-alloy Late Iron Age to early Roman brooch of the Langton Down (Nertomarus) type, dating to the period AD 25-60. It is incomplete so far as the lower half of the bow, catchplate and pin are missing. It has also been squashed. It measures 33.03mm in length and 25.74mm in width. The wings are semi-cylindrical in form and would have had held in place a separately cast copper-alloy spring with six coils. Their front face is decorated with a central oval perforated with three holes. The design is similar to that of Hattatt no.270, 'hooks and eyes' type, with scroll moul…
Created on: Tuesday 7th February 2017
Last updated: Wednesday 22nd March 2017
Spatial data recorded. This findspot is known as 'Droxford', grid reference and parish protected.


  • Thumbnail image of HAMP-9FAE86

Record ID: HAMP-9FAE86
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Published Find published
An incomplete Roman Hod Hill brooch, dating to the period AD 43-70. It is incomplete insofar as it is missing its pin and mechanism. The bow is triangular in shape, measuring 56.05mm in length and 21.98mm at maximum width. What remains of the head is starting to curve round, but the pin and accompanying mechanism have since broken. The head measures 6.69mm in length, and tapers outwards to the side lugs, which are the widest part of the brooch. These side lugs are broadly triangular in shape, and have two raised transverse ridges on each. The body of the bow measures 8.76mm in width, …
Created on: Tuesday 7th February 2017
Last updated: Thursday 2nd March 2017
Spatial data recorded. This findspot is known as 'Droxford', grid reference and parish protected.


  • Thumbnail image of HAMP-9E7153

Record ID: HAMP-9E7153
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman plate brooch, dating to the period AD 150-250. It is incomplete insofar as it is missing its pin. It is broadly circular in shape with considerable edge damage. The mechanism for the pin jutts out from one side, measuring 4.69mm in length and 4.89mm in width. The total length of the brooch is 22.57mm and is 20.09mm wide. Approximately at the centre of the brooch is a circular knop, its rivetted end visible to the reverse. The knop measures 2.11mm in height and 3.95mm in diameter. It is set with what is now red enamel at the centre. There appears to be traces of sun…
Created on: Tuesday 7th February 2017
Last updated: Thursday 16th February 2017
Spatial data recorded. This findspot is known as 'Droxford', grid reference and parish protected.


  • Thumbnail image of HAMP-9CC26B

Record ID: HAMP-9CC26B
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy Roman disc brooch, dating to the period AD 80-250. It is incomplete insofar as it is missing its pin, although the edge is somewhat damaged. It is broadly circular in shape, measuring 25.38mm in length and 30.02mm in width. From the catchplate, the brooch measures 6.33mm thick. At the two widest points the broadly circular shape has pointed knops. The brooch is framed by two concentric ridges, approximately 3.22mm apart. Within the smaller of the two concentric ridges, there is a ring of teardrop shaped enamel decoration. These are now light green in colour,…
Created on: Tuesday 7th February 2017
Last updated: Thursday 16th February 2017
Spatial data recorded. This findspot is known as 'Droxford', grid reference and parish protected.


  • Thumbnail image of HAMP-863394

Record ID: HAMP-863394
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Published Find published
A complete copper-alloy Roman Wroxeter type brooch, dating to the period AD 75-200. The brooch measures 65.16mm in length and at maximum width is 15.36mm. Starting from the headloop, which is complete and 5.15mm in diameter, there are two ridges which curve down from the headloop and curl upwards towards the headloop. They are 13.23mm wide. From this the headloop tapers inwards again to the D-shaped plate, which contains the spring mechanism to the reverse. This plate is D-shaped arranged on its side, with the straight edge underneath the headloop. It is along the straight edge that th…
Created on: Monday 6th February 2017
Last updated: Friday 27th April 2018
Spatial data recorded. This findspot is known as 'Owslebury', grid reference and parish protected.


  • Thumbnail image of HAMP-1C5091

Record ID: HAMP-1C5091
Object type: BROOCH
Broad period: IRON AGE
County: Hampshire
Workflow stage: Published Find published
An incomplete cast copper-alloy late Iron Age to Early Roman (AD 20-70) Colchester one-piece brooch. The brooch measures 61.62mm in length and at the wingspan, 14.35mm in width. It is incomplete insofar as the spring, pin and catchplate are missing. At the top of the bow are two protrusions, originally extending into the spring (lower) and forward-facing hook (upper). The top protrusion measures 5.08mm in length and 4.31mm in width, though it tapers slightly in width to 2.16mm. It measures 1.77mm in thickness. The lower protrusion measures 4.82mm in length, curling at the end up towar…
Created on: Wednesday 1st February 2017
Last updated: Thursday 2nd March 2017
Spatial data recorded. This findspot is known as 'Droxford', grid reference and parish protected.


  • Thumbnail image of HAMP-77F713

Record ID: HAMP-77F713
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Published Find published
An incomplete Roman copper-alloy gilded disc plate brooch, dating to the period AD 200-350. It measures 40.13mm in diameter, and 13.11mm at its thickest. The brooch is incomplete insofar as the pin is missing and the very edge is damaged in places. There is a small circular knop in the centre, measuring 5.84mm in diameter. There is a small hollowed recess at the centre of the knop, but it is unclear if anything was set within this recess. The small knop is surrounded by a slight circular recess, measuring 12.33mm in diameter. Outside of this recess but contained within a concentric ri…
Created on: Tuesday 24th January 2017
Last updated: Saturday 6th May 2017
Spatial data recorded. This findspot is known as 'Froxfield', grid reference and parish protected.


  • Thumbnail image of HAMP-F651F4

Record ID: HAMP-F651F4
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Published Find published
An incomplete Roman Hod Hill brooch, dating to the period AD 43-70. It measures 49.74mm in length and at the side lugs measures 16.89mm in width, though as one of the side lugs is missing the actual width of the brooch would have been approximately 6.4mm wider. The brooch is incomplete insofar as one side lug is missing, along with the shank of the pin. The wings measure 13.26mm in width and 3.47mm in height. They curl forwards to hold the axis bar. The presence of iron corrosion within the wings indicates that the axis bar was made of iron. From the wings extend the bow, measuring…
Created on: Wednesday 18th January 2017
Last updated: Thursday 2nd March 2017
Spatial data recorded. This findspot is known as 'Tichborne', grid reference and parish protected.


  • Thumbnail image of HAMP-4BD1D8

Record ID: HAMP-4BD1D8
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Published Find published
An incomplete copper-alloy brooch of Colchester derivative Polden Hill (Mackreth Group 5, Western Group, flat wing ends), Mackreth 2011, 5.b4.Plate 50, dating to the period AD 50-150. It is incomplete insofar as the pin has broken after 22.88mm length. The brooch measures 39.83mm in length and 16.72mm at maximum wingspan. The coil at the reverse of the brooch has a break in it, which may be sign of repair and reuse. The pin which extends from the coil has been broken. The wings are D-shaped in cross section and have pierced lugs. They are 5.59mm in thickness. At the top of the bow the…
Created on: Tuesday 10th January 2017
Last updated: Thursday 2nd March 2017
Spatial data recorded. This findspot is known as 'Amesbury', grid reference and parish protected.


  • Thumbnail image of HAMP-3B568E

Record ID: HAMP-3B568E
Object type: BROOCH
Broad period: IRON AGE
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Iron Age La Tène I type brooch, dating to the period 400-200 BC. The pin and half of the spring are missing; only two coils remain to one side. The brooch measures 53.36mm in length and 7.68mm maximum width. As the coil meets the bow, there are three transverse incisions spanning the width of the bow, which at this point measures 3.36mm in width. The bow broadens in width to 7.68mm before tapering to a base where three further transverse linear incisions have been made. The length of the bow has at least three longitudinal linear incisions. After the latter…
Created on: Monday 9th January 2017
Last updated: Wednesday 11th January 2017
Spatial data recorded. This findspot is known as 'Wylye', grid reference and parish protected.


  • Thumbnail image of HAMP-93EE09

Record ID: HAMP-93EE09
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Published Find published
An incomplete copper-alloy Roman zoomorphic plate brooch, dating to the period AD 100-250. It depicts the front portion of a hare or possibly a dog advancing right. The measurements are 27.43mm in length, 18.79mm in width and 10.68mm in thickness. It weighs 1.85g in total. The hind legs and rump are missing, and the ear and snout have signs of damage. There are traces of enamel, off white and dark blue, in the cells within the body. All breaks are old. Closely comparable with Hattatt (2000), fig.221, no. 1189-1190.
Created on: Tuesday 20th December 2016
Last updated: Thursday 14th February 2019
Spatial data recorded. This findspot is known as 'East Challow', grid reference and parish protected.


  • Thumbnail image of HAMP-2773FB

Record ID: HAMP-2773FB
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete early early-medieval (Anglo Saxon) copper-alloy pin from Type F penannular brooch, dating to the period 410-700. The pin's loop is in the form of a hollow cylindrical or drum-shaped element, presumably cast as one with the shaft. The loop is circular in cross-section and measures 8.41mm in diameter and 11.07mm in length. It is 1.89mm thick. There are prominent rims at either open end, a wide furrow next to each and at the centre two ridges to either side of a raised area. Where the shaft extends from the loop, this central raised area is widest, the two ridges to either side…
Created on: Thursday 15th December 2016
Last updated: Monday 1st October 2018
Spatial data recorded.


  • Thumbnail image of HAMP-6E2D7C

Record ID: HAMP-6E2D7C
Object type: BROOCH
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper-alloy Iron Age brooch probably of La Tenè I type, dating to the period 400-200 BC. All that remains of the brooch is the pin, which has a dark brown patina. There is a small notch at the top of the pin, measuring 2.45mm in length and 2.83mm in width. It reveals a lighter brown recess. Opposite to this there is an incised line, which extends 24.6mm the length of the pin. In total the pin measures 45.48mm in length, 2.83mm in width and tapering down to a point. It weighs 1.48g.
Created on: Tuesday 6th December 2016
Last updated: Friday 6th July 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 42
Search server index: asgard

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 42
  • Mean quantity: 1.000
  • Maximum: 1

Filter your search

1 - 20 of 42 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.