Back to simple search | Back to advanced search

    You searched for:

    • IdentifierID: PAS555359BA001AEB

  • Thumbnail image of SOM-621616

Record ID: SOM-621616
Object type: SCRAPER (TOOL)
Broad period: BRONZE AGE
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A flint scraper and retouched incomplete flint flake of probable later Prehistoric date. 1. A large, sub-rectangular tertiary flake of beige-brown flint mottled with areas of sandy, cortex-like inclusions. The dorsal face exhibits a number of irregularly sized removals, all probably from the same platform as the overall removal, some abrasion along the dorsal end of the striking platform would suggest the use of platform preparation.The bulb of percussion is relatively diffuse, allthough this is likely down to the nature of the raw material, and is unscarred. The left and distal edges…
Created on: Wednesday 11th July 2018
Last updated: Wednesday 11th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-61B2CC

Record ID: SOM-61B2CC
Object type: CLOTH SEAL
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Medieval or Post Medieval lead cloth seal, probably dating to c. AD 1400-1714. Disc 1 of a 2- or 4-part seal. The surviving fragment comprises of a flat disc of lead with an integral rivet projecting from the reverse. The front of the disc is stamped with a crowned F flanked by fleur-de-lis, all in low relief. Dimensions: diameter 17.3mm; thickness 7.2mm; weight 2.48g. With so little of the design surviving any specific identification must be slightly tentative, however very similar seals for faulty cloths are published by Egan (1987: nos. 110-111), suggested to date to…
Created on: Wednesday 11th July 2018
Last updated: Thursday 12th July 2018
Spatial data recorded.


  • Image not taken

Record ID: SOM-611D44
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy contemporary copy of a nummus of the House of Constantine, probably dating to c. AD 353-361 (Reece period 18). Imitating the FEL TEMP REPARATIO reverse type, depicting a soldier spearing a fallen horseman.
Created on: Wednesday 11th July 2018
Last updated: Wednesday 11th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-60D1F9

Record ID: SOM-60D1F9
Object type: COIN
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver farthing of Edward II (AD 1277-1327), dating to AD 1310-1314. North class 10-11, Withers type 30. London mint. North (1991: 38) no. 1070/1-2.
Created on: Wednesday 11th July 2018
Last updated: Thursday 12th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-609E06

Record ID: SOM-609E06
Object type: COIN
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A worn medieval Silver penny of Henry V (AD 1413-1422). Probably class F or G. York mint. North (1991: 71) no. 1403-1404.
Created on: Wednesday 11th July 2018
Last updated: Wednesday 11th July 2018
Spatial data recorded.


  • Image not taken

Record ID: SOM-5E7638
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy contemporary copy of a nummus of the House of Constantine, probably dating to c. AD 353-361. Imitating the FEL TEMP REPARATIO reverse type, depicting a soldier spearing a fallen horseman.
Created on: Wednesday 11th July 2018
Last updated: Wednesday 11th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-5E30B7

Record ID: SOM-5E30B7
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy Sestertius of uncertain ruler, probably of the Julio-Claudian dynasty, probaby dating to c. 27 BC - AD 68. Uncertain reverse type, Rome mint.
Created on: Wednesday 11th July 2018
Last updated: Wednesday 11th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-5DF579

Record ID: SOM-5DF579
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy dupondius of uncertain ruler, probably of the Nerva-Antonine dynasty, probaby dating to c. AD 97-168. Uncertain reverse type, Rome mint.
Created on: Wednesday 11th July 2018
Last updated: Wednesday 11th July 2018
Spatial data recorded.


  • Image not taken

Record ID: SOM-5D87D5
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper alloy nummus of the house of Constantine, dating to AD 318-324 (Reece period 16). VIRTVS EXERCIT reverse type, depicting two captives flanking a central standard or trophy. Probably Trier mint.
Created on: Wednesday 11th July 2018
Last updated: Wednesday 11th July 2018
Spatial data recorded.


  • Image not taken

Record ID: SOM-5D3D76
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper alloy radiate of Tetricus I (AD 271-274, Reece period 13). Uncertain reverse type, depicting a female figurine standing left. Uncertain mint.
Created on: Wednesday 11th July 2018
Last updated: Wednesday 11th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-5D1A89

Record ID: SOM-5D1A89
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy radiate of Gallienus (AD 253-268), probably dating to AD 260-268 (Reece Period 13) Uncertain reverse type and mint.
Created on: Wednesday 11th July 2018
Last updated: Wednesday 11th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-4CB80C

Record ID: SOM-4CB80C
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A Post-Medieval lead alloy button, probably dating to c. AD 1600-1800. The button is discoidal, and plano-convex in cross section. An integral, undrilled shank projecting from the reverse, now flattened against the reverse of the button. The face of the button is decorated in low relief with an unclear cruciform or foliate motif. Dimensions: diameter 17.2mm; thickness 6.1mm; weight 4.21g. cf. similar buttons published by Read (2005: 56-60, nos. 207-231).
Created on: Tuesday 10th July 2018
Last updated: Tuesday 10th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-4A4DA2

Record ID: SOM-4A4DA2
Object type: DEBITAGE
Broad period: BRONZE AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Sevon incomplete flakes prehistoric flint debitage. The flakes represent a number of flint sources, and are a mix of tertiary and secondary flakes, although where it survives the area still covered by cortex is invariably small. The proximal end survives on three flakes, these all have relatively diffuse bulbs of percussion, only one exhibiting a bulbar scar and with one exhibtiign a slight 'lip' at the platform, suggesting the use of a soft hammer. One flake exhibits platform preparation, and clear evidence of multiple striking platforms. The flakes exhibit a mixture of sub-parallel a…
Created on: Tuesday 10th July 2018
Last updated: Tuesday 10th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-D14AD9

Record ID: SOM-D14AD9
Object type: SCRAPER (TOOL)
Broad period: BRONZE AGE
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Four Late Neolithic to Early Bronze Age flint scrapers, probably dating to c. 3,300-1,600BC. 1. A thumbnail scraper worked from a reused primary or secondary flake of grey-brown flint; cortex covers those areas of the dorsal face which do not exhibit retouch, c. 60%. The flake has no clear point or bulb of percussion, with one facet of the dorsal face at the proximal end and the ventral face much more heavily patinated, suggesting the reuse of an older tool. The dorsal face exhibits long, scalar retouch, abrupt along the left edge, becoming semi-abrupt at the distal end and right edg…
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of SOM-CEDE8F

Record ID: SOM-CEDE8F
Object type: COIN
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver penny of Henry V (AD 1413-1422). Class C, D, or F. Minted in York. North (1991: 71) no. 1400-1401, 1403.
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of SOM-CE76A1

Record ID: SOM-CE76A1
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy Colchester derivative initial T-shaped brooch, probably dating to c. AD 50-100. The brooch survives largely complete, missing only its pin and with the catchplate incomplete due to abrasion. At the head of the brooch the wings survive to a width of 24.6mm, these are cylindrical; retaining a copper alloy axis bar in situ, and with a sub-rectangular slot cut into the reverse to accomodate a hinged pin. The wings are c. 4.1mm in diameter, with the reverse of the left wing partially lost. The bow projects from the head with a width of 6.7mm, and is broadly plano-conv…
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of SOM-BCA3E2

Record ID: SOM-BCA3E2
Object type: SCRAPER (TOOL)
Broad period: BRONZE AGE
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
An Early Bronze Age flint 'thumbnail' scraper, probably dating to c. 2400-1600 BC. Worked from a sub-oval promary flake of translucent brown flint now heavily patinated a milky white, with white cortex covering the entirety of the dorsal face, except for those areas exhibting retouch. A relatively diffuse bulb of percussion is present at the proximal end of the ventral face, with no bulbar scar. The perimeter of the dorsal face exhibits short, semi-abrupt scalar retouch, except for at the proximal end. Dimensions: length 23.8mm; width 26.9mm; thickness 7.2mm; weight 5.72g.
Created on: Thursday 21st June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of SOM-BB7D43

Record ID: SOM-BB7D43
Object type: BUCKLE
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Medieval gilded copper alloy buckle pin from a 'Disc-on-pin' Buckle of Redmayne's type D4, probably dating to c. AD 1300-1500. The pin consists of a central circular copper alloy sheet plate with large central circular aperature. This is flanked by four perforations, one on each axis, and with each retaining a separate copper alloy rivet with a large bulbous head; the least abraded of these decorated with concentric circles of punched pits. The point of the pin projects from one edge of the plate, with the vestigial remains of a lost loop from the opposing edge, on the sa…
Created on: Thursday 21st June 2018
Last updated: Monday 2nd July 2018
Spatial data recorded.


  • Thumbnail image of SOM-BB12A4

Record ID: SOM-BB12A4
Object type: BUCKLE
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A Medieval copper alloy buckle with integral forked spacer, probably dating to c. AD 1300-1450. The buckle frame has a single oval loop, with a D-shaped cross section. The outer edge of the loop is expanded into a small point, with two prongs expanding from the opposite edge. Both appear to be incomplete. The bar narrows between the two prongs, where a partial wire pin surives in situ. Dimensions: length 30.8mm; width 24.3mm; thickness 2.9mm; weight 3.81g. cf. Egan & Pritchard (2002: 78-80) nos. 322-330, excavated in phases dating to AD 1330-1450. Ottoway & Rogers (2002: 28…
Created on: Thursday 21st June 2018
Last updated: Thursday 21st June 2018
Spatial data recorded.


  • Thumbnail image of SOM-BAD7A1

Record ID: SOM-BAD7A1
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper alloy Colchester polden hill brooch, probably dating to c. AD 80-120. The brooxch is missing its right wing, pin mechanism and the terminal of its foot. The head of the brooch survives to a width of 18.9mm, but with the right wing lost to an old break. The wings are semi-cylindrical, with an open reverse and with the surviving wing terminating in an incomplete perforated wing cap. The front of the wing is moulded into a longitudinal ridge at both the wing tip and mid-point. The pin mechanism is lost. The bow projects from the head with a width of 7.9mm and a…
Created on: Thursday 21st June 2018
Last updated: Thursday 21st June 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 1,120
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 1,369
  • Mean quantity: 1.222
  • Maximum: 30

Filter your search

1 - 20 of 1,120 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.