Record ID: HAMP-68FC53
Object type: COIN
Broad period: ROMAN
County: East Sussex
Workflow stage: Published
A copper-alloy Roman sestertius of Diva Faustina II struck under Marcus Aurelius (AD 161-180), dating to AD 175-180 (Reece period 8). Reverse: CONSECRATIO, Faustina II holding sceptre, seated on peacock flying right. Mint of Rome. RIC III, p. 349, no. 1702.
Created on: Thursday 8th October 2015
Last updated: Monday 26th October 2015
Spatial data recorded.

Record ID: HAMP-673232
Object type: COIN
Broad period: ROMAN
County: East Sussex
Workflow stage: Awaiting validation
A copper-alloy Roman nummus of the House of Constantine, dating from AD 307-364. VRBS ROMA type, depicting the helmeted bust of Roma on the obverse; the reverse is illegible, but is likely to be of the Wolf and Twins, probably dating from AD 330-340 (Reece Period 17). Mint unknown.
Created on: Thursday 8th October 2015
Last updated: Thursday 28th January 2016
Spatial data recorded.

Record ID: HAMP-6580B4
Object type: COIN
Broad period: ROMAN
County: East Sussex
Workflow stage: Awaiting validation
A copper alloy Roman radiate of Divus Claudius dating from AD 270-271 (Reece period 13). AEQVITAS reverse type depicting Aequitas standing left, holding scales in right hand and cornucopiae in left. Mint unknown.
Created on: Thursday 8th October 2015
Last updated: Thursday 28th January 2016
Spatial data recorded.

Record ID: HAMP-593565
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An apparently late early-medieval copper alloy stirrup terminal dating to the 11th century, with old damage to one side. The terminal is zoomorphic in form and depicts an animal's head with bulging elongated pointed-oval eyes to either side at the centre and a prominent snout with pronounced lip to the front at the open end beneath. Above this (and below the eyes) is a triangular moulding. To either side of the snout a pair of grooves flanks the line of the base of the snout (also the base of the object). Too one side there is a very worn probable break between the eyes and the base o…
Created on: Tuesday 1st September 2015
Last updated: Tuesday 14th June 2016
Spatial data recorded. This findspot is known as 'Chitterne', grid reference and parish protected.

Record ID: HAMP-5870C7
Object type: SPUR
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A fragment of post-medieval copper alloy spur, consisting of the terminal (16th-17th century in date). The terminal consists of three conjoined circular lobes with pierced rounded perforations. The diameter of the two outer perforations is 4.0mm, the central one is 2.9mm. Between two of the lobes there is a small ridge extending out 2.1mm. Diagonally opposite this is an incised line and an old break where the main arm of the spur would have extended. The object is D-shaped in cross section with rounded corners, and a flat face. The reverse is flat and undecorated. The fragment measure…
Created on: Tuesday 1st September 2015
Last updated: Tuesday 1st September 2015
Spatial data recorded. This findspot is known as 'Chitterne', grid reference and parish protected.

Record ID: HAMP-576797
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A copper alloy medieval strap loop. The strap loop is trapezoidal in shape and has a central integral external rivet (2.2mm in length) on the narrower side, which measures 10.1mm. The loop is flat on both faces, and has no decoration. The strap loop measures 11.4mm in width (top edge) and 9.9mm in length . The internal measurements are 7.7mm- 8.9mm. The thickness is 1.5mm. The weight is 0.56g. The loop is a dark green grey colour.
Created on: Tuesday 1st September 2015
Last updated: Tuesday 1st September 2015
Spatial data recorded. This findspot is known as 'Chitterne', grid reference and parish protected.

Record ID: HAMP-76A3F1
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A medieval (c.1230-1400) copper alloy trapezoidal strap loop with internal projections, measuring 19.54x13.81mm (internal 16.21x10.37mm). It weighs 0.82g . The loop has rounded corners and the edges are D shaped in cross section.
Created on: Tuesday 28th July 2015
Last updated: Wednesday 19th August 2015
Spatial data recorded.

Record ID: HAMP-7675AD
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An early post-medieval (1500-1700) copper alloy dress hook with pendent loop, measuring 33.3x13.6x1.4mm and weighing 2.93g. The body of the object is broadly trapezoidal with the hook protruding from the smallest edge of the body. The hook curls back on itself to hold the pendent loop, which measures 9.9mm in diameter (internal 5.8mm). The wider end of the object is in-curved with a V-shaped groove. Arranged vertically are two rivet holes (1.5mm diameter) both missing their rivets.
Created on: Tuesday 28th July 2015
Last updated: Wednesday 19th August 2015
Spatial data recorded.

Record ID: HAMP-762F7E
Object type: MOUNT
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A medieval (1250 - 1500) copper alloy domed sexfoil belt mount. The mount is formed from a sheet of metal stamped into a six-lobed dome, well defined with faceted sides and trimmed to the shape of the lobes. The rivet is still in place but sits off centre, a seperate rove sits underneath to hold the rivet in place. The metal on the outside has an even dark green patina, inside it is white from corrosion. The mount has a diameter ranging from 13.72 to 13.98mm, stands at 5.82mm tall and weighs 0.82g.
Created on: Tuesday 28th July 2015
Last updated: Wednesday 19th August 2015
Spatial data recorded.

Record ID: HAMP-75DCAF
Object type: BRACELET
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation
A fragment of a copper alloy Roman (AD 43-410) bracelet or armlet. It is D-shaped in cross-section with old breaks at either end and very slightly curved in profile. The inside surface is flat while the outside is decorated with alternating bands of transverse ridges and grooves and raised lozenges (three of the former and two of the latter). The raised diamonds have been formed by cutting triangular facets at each corner of a rectangular section. The fragment measures 40.1mm by 4.0mm by 1.3mm, and weighs 1.24g. It is similar to Crummy (1983) 40-41, 1659.
Created on: Tuesday 28th July 2015
Last updated: Wednesday 19th August 2015
Spatial data recorded.

Record ID: HAMP-7544A1
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Published
A copper alloy coil, consisting of five coils, and perhaps from a Roman sprung brooch. The coils are flat, c.3mm wide and 0.9mm thick. Each end coil tapers to c.1.4mm wide. The patina is smooth, shiny and a bright bluey-green in colour; patches are missing. It measures 14.9mm in length, 6.6mm wide, 1.6mm thick and weighs 1.04g.
Created on: Tuesday 28th July 2015
Last updated: Monday 19th October 2015
Spatial data recorded.

Record ID: HAMP-7529FC
Object type: VESSEL
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation
A body sherd of Roman oxidised greyware (AD 43-410). The fabric is sandy with micaceous inclusions and rouletted decoration to the external surface. There are traces of a dark colour wash to both surfaces. It measures 34.3x22.7x6.4mm and weighs 5.2g.
Created on: Tuesday 28th July 2015
Last updated: Wednesday 19th August 2015
Spatial data recorded.

Record ID: HAMP-751A1A
Object type: VESSEL
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation
A rim sherd from a Roman oxidised greyware vessel (AD 43-410). The edge of the rim itself is lost through damage. The fabric is sandy with micaceous inclusions. A large piece of grog is visible to the interior surface of the vessel fragment. It measures 53.3x31.2x8.1mm and weighs 20.18g.
Created on: Tuesday 28th July 2015
Last updated: Wednesday 19th August 2015
Spatial data recorded.

Record ID: HAMP-74F4AD
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete post-medieval (1500-1700) copper alloy double-loop trapezoidal buckle frame, missing one loop (old damage) but complete with pin. The outer edge of the frame is slightly triangular at the centre. The strap bar has a pointed knop at either end, beyond the frame. The pin is D-shaped in cross-section and narrows from 2.6mm wide to a rounded point. It bends slightly to one side. 'Shine' evident on the surface on the buckle suggesting that it may have been originally tinned, although almost all of the original patina is now missing. The incomplete buckle measures 16.3x20.6x1…
Created on: Tuesday 28th July 2015
Last updated: Wednesday 19th August 2015
Spatial data recorded.

Record ID: HAMP-74AC49
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A copper-alloy medieval (1250-1400) bar-mount with pendent loop. The bar-mount is sheet copper alloy and 3.7mm wide, narrowing to 1.9mm wide and curving back on itself when it extends into a rectangular plate fixed to the front of the bar with a rivet c.1mm in diameter - this holds the pendent loop. The pendent loop (11.7mm diameter, internal 4.9mm)) is very worn at its point of attachment. There are tooling marks to the reverse. The object measures 18.7mm in length, 11.7mm in max.width, 2.6mm in depth and weighs 0.74g.
Created on: Tuesday 28th July 2015
Last updated: Thursday 3rd May 2018
Spatial data recorded.

Record ID: HAMP-747B7B
Object type: MOUNT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A medieval (c.1250-1450) copper alloy simple bar-mount. It is rectangular in shape and D-shaped in cross-section. Either end is pierced for a (missing) rivet, countersunk from the reverse and 1.6mm in diameter. The bar mount measures 17.0mm in length, 4.4mm in width, 1.3mm in thickness and weighs 0.53g.
Created on: Tuesday 28th July 2015
Last updated: Thursday 7th January 2016
Spatial data recorded.

Record ID: HAMP-11A5EE
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A medieval (1350-1400) copper alloy rectangular strap loop with a seperate rivet, which is missing. The loop measures 12.5mm by 11.7mm, is 2.0mm thick and weighs 0.64g. Its internal minimum width is 10.0mm. The strap loop is similar to Egan (1991) 232, no. 1247, which was found in a context dated 1350-1400.
Created on: Thursday 23rd July 2015
Last updated: Wednesday 27th January 2021
Spatial data recorded.

Record ID: HAMP-117D23
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete Medieval (1250-1450) copper alloy single loop oval buckle frame with ornate outside edge. The buckle is bent and missing the strap bar. The outer edge has a central section between two transverse ribs, themselves flanked at either end by an angled knop and a central groove for the pin. The metal has a dark green patina. The buckle measures 29.9mm by 5.3mm, is 2.7mm thick and weighs 4.84g.
Created on: Thursday 23rd July 2015
Last updated: Wednesday 22nd August 2018
Spatial data recorded.

Record ID: HAMP-114A3D
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete post-medieval (1500-1700) copper alloy dress hook with a scallop-shaped plate. The attachment loop on the top of the dress hook is incomplete. The hook has been flattened out and is slightly bent to one side. The dress hook is flat to the underside with moulded and grooved decoration to the upper face, with three diagonal ribs either side of where the pin extends and just above a transverse collar. The dress hook measures 26.5mm in length, 12.4mm in max.width, 1.2mm in thickness and weighs 0.89g.
Created on: Thursday 23rd July 2015
Last updated: Wednesday 19th August 2015
Spatial data recorded.

Record ID: HAMP-0EE0C1
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Published
A fragment of a Roman (AD 50-150) T-shaped (initial) brooch. It consists of the upper bow, wings, part of the head loop and roughly half of the pin only. The head has tubular wings (17.2mm wide) with a transverse incised line at either end. To the reverse is a notch for the pin, which is hinged on the still present copper alloy axis bar. The head of the pin is triangular in shape and the shank circular in cross-section (1.4mm diameter). The bow is 8.4mm wide and projects forwards at an angle before dropping vertically into the bow. This is decorated with diagonal grooves either side …
Created on: Thursday 23rd July 2015
Last updated: Monday 19th October 2015
Spatial data recorded. This findspot is known as 'Kimpton', grid reference and parish protected.