Back to simple search | Back to advanced search

    You searched for:

    • IdentifierID: PAS4DD3D3E8001137
    • Page: 6

  • Thumbnail image of PUBLIC-0E6A93

Record ID: PUBLIC-0E6A93
Object type: TILE
Broad period: MEDIEVAL
County: Neath Port Talbot
Workflow stage: Awaiting validation Find awaiting validation
Medieval floor tile fragment probably of 14th century date The fragment is a corner from a square tile with straight sides (with a surviving length of 97.5mm, a surviving width of 75.6mm, a thickness of 23.8mm and a weight of 227.8g). The corner of the tile has two-colour decoration, with the white clay slip applied with a 'slip-on-impression' technique (approximately 1mm deep). The surviving decoration forms a white cross with expanded terminals, probably forming a grid with cusped quatrefoil openings set squarely against a black background. A white swirl in the corner of the t…
Created on: Tuesday 9th August 2011
Last updated: Wednesday 10th August 2011
Spatial data recorded.


  • Image not taken

Record ID: PUBLIC-A6AFD6
Object type: COIN
Broad period: ROMAN
County: Essex
Workflow stage: Published Find published
Roman Republican silver denarius of unclear moneyer, dating to the 2nd-1st centuries, probably c. 140-100 BC. Mint of Rome. Helmeted head of Roma right / Quadriga. 2.58g, corroded or possibly burnt
Created on: Thursday 4th August 2011
Last updated: Tuesday 14th March 2017
Spatial data recorded.


  • Image not taken

Record ID: PUBLIC-A66B17
Object type: COIN
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a medieval silver penny, worn and clipped. Probably dating from the late 13th - 15th century AD.
Created on: Thursday 4th August 2011
Last updated: Wednesday 21st November 2012
Spatial data recorded.


  • Image not taken

Record ID: PUBLIC-A64F58
Object type: COIN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval copper alloy token 'Royal' farthing token Charles I (1625-49), 'Richmond' type, 1625-34 0.38g
Created on: Thursday 4th August 2011
Last updated: Tuesday 2nd August 2016
Spatial data recorded.


  • Image not taken

Record ID: PUBLIC-A64526
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval copper alloy token Probably a 'Royal' farthing token from the time of Charles I (1625-49), perhaps a contemporary counterfeit 0.33g
Created on: Thursday 4th August 2011
Last updated: Thursday 27th June 2013
Spatial data recorded.


  • Image not taken

Record ID: PUBLIC-A61061
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval copper alloy farthing trade token issue by John Seymor of Wantage (then Berkshire) dating to the period AD 1648-1672. Williamson (Berkshire) no. 158.
Created on: Thursday 4th August 2011
Last updated: Monday 7th December 2015
Spatial data recorded.


  • Image not taken

Record ID: PUBLIC-A5B2F2
Object type: COIN
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Edward IV, 1st reign (1461-70) light coinage, 1464/5-70; Groat, Norwich North 1582 3.03g
Created on: Thursday 4th August 2011
Last updated: Sunday 6th October 2013
Spatial data recorded.


  • Thumbnail image of PUBLIC-A568D8

Record ID: PUBLIC-A568D8
Object type: MOUNT
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy belt or strap mount, probably of 16th or 17th century date The mount is fragmentary (with a surviving length of 30.5mm a width of 25.6mm, a thickness of 3.0mm and a weight of 4.9g) and depicts a floral motif. One remnant stub for attachment survives on the rear. The surface has been lost and is now pale to mid brown with remnant traces of pale green patina.
Created on: Thursday 4th August 2011
Last updated: Wednesday 10th August 2011
Spatial data recorded.


  • Thumbnail image of PUBLIC-A55047

Record ID: PUBLIC-A55047
Object type: PURSE
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Late medieval copper alloy purse frame, probably of 15th to 16th century date The purse frame is fragmentary and both of the terminals have been lost from the bar (with a surviving length of 54.4mm and a weight of 17.7g). The bars are downward turned and of D-shaped section at the break (7.4mm x 4.5mm). Either side of the central block are beasts' heads, simply formed by moulded faceting. The beasts are biting on the emerging bars. The central block is sub-rectangular (9.9mm high, 12.8mm wide and 7.5mm thick) and no decoration survives on either face. The perforation through the block…
Created on: Thursday 4th August 2011
Last updated: Wednesday 8th August 2018
Spatial data recorded.


  • Thumbnail image of PUBLIC-A53256

Record ID: PUBLIC-A53256
Object type: BROOCH
Broad period: ROMAN
County: the Vale of Glamorgan
Workflow stage: Published Find published
Roman copper alloy bow brooch of Colchester derivative, Polden Hill (Mackreth 2011, Part 3, Transitional Type 2/3, Group 2.b2, flat wing ends, Plate 45)and of 1st century AD date. The brooch is fragmentary, represented by the head only (with a surviving length of 11.2mm and a weight of 4.4g). The brooch employed a spring mechanism, now lost, which was secured between perforated lugs at the ends of the semi-cylindrical wings (with a width of 36.4mm and a thickness of 3.7mm), in a Polden Hill type arrangement. At the top of the head is a stub, possibly from a hook to secure the chord…
Created on: Thursday 4th August 2011
Last updated: Monday 4th September 2017
Spatial data recorded.


  • Thumbnail image of PUBLIC-A4F8C8

Record ID: PUBLIC-A4F8C8
Object type: BROOCH
Broad period: ROMAN
County: Monmouthshire
Workflow stage: Published Find published
Roman copper alloy bow brooch of Colchester derivative, Polden Hill (Mackreth 2011, Part 3, Group 1.d). The brooch is fragmentary and is represented by the head and upper bow only (with a surviving length of 23.4mm, a surviving depth of 17.8mm and a weight of 11.0g). The spring remains in place and is made of iron and wound around an iron axis bar. The spring is secured by lateral lugs, one of which has been lost (giving the wings a surviving width of 31.9mm). No decoration survives on the fronts of the wings. The upper bow is of oval section (with a width at the head of 9mm and a …
Created on: Thursday 4th August 2011
Last updated: Wednesday 13th September 2017
Spatial data recorded.


  • Thumbnail image of PUBLIC-A4E201

Record ID: PUBLIC-A4E201
Object type: FINGER RING
Broad period: MODERN
County: Monmouthshire
Workflow stage: Awaiting validation Find awaiting validation
Modern gold finger-ring of 18th century date The finger-ring is of seal type and is complete (with an overall length of 23.4mm, a maximum width of 21.2mm and a weight of 10.7g). The hoop is of D-shaped section, with straight parallel sides (with a width of 3.3mm and a thickness of 1.5mm) and appears elongated, producing an oval internal profile (20.1mm x 18.5mm). The underside of the bezel has rounded facets either side of the centre, one of which is stamped with a trefoil maker's mark. The bezel is oval (17.7mm x 15.1mm) and has a recessed punched rope motif. At the centre of the …
Created on: Thursday 4th August 2011
Last updated: Wednesday 10th August 2011
Spatial data recorded.


  • Thumbnail image of PUBLIC-A48044

Record ID: PUBLIC-A48044
Object type: KEY (LOCKING)
Broad period: ROMAN
County: Newport
Workflow stage: Awaiting validation Find awaiting validation
Roman Copper alloy Key Copper alloy tumbler lock slide key with six square teeth. A simple, almost crude, flat rectangular handle expands slightly to form a crude suspension loop. The handle and shaft is decorated only on the front face. Bands of vertical incised lines are defined by horizontal grooves. Just below the loop there are tree such bands: two very narrow ones, with a wider one between them. At the other end of the handle there is only one narrow band, along the bottom edge, with a wide band above. The shaft is decorated by three transverse ridges at the handle end and two…
Created on: Thursday 4th August 2011
Last updated: Wednesday 14th September 2011
Spatial data recorded.


  • Thumbnail image of PUBLIC-9291E8

Record ID: PUBLIC-9291E8
Object type: FINGER RING
Broad period: ROMAN
County: Carmarthenshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy finger-ring, possibly of Roman date, c. 3rd century The finger ring is fragmentary and is represented by the bezel and adjacent hoop only (with a surviving length of 14.8mm, a surviving depth of 6.1mm and a weight of 1.8g). The hoop is of sub-rectangular section and is comparatively narrow and thin (2.7mm wide and 1.9mm thick). The integral circular bezel (9.8mm diameter and 3.3mm thick) is differentiated from the hoop by a slight stepped moulding around the side. The bezel is decorated with an impressed design, now worn and corroded, comprising a cross formed by shallo…
Created on: Wednesday 3rd August 2011
Last updated: Wednesday 10th August 2011
No spatial data available.


  • Thumbnail image of PUBLIC-924E02

Record ID: PUBLIC-924E02
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Swansea
Workflow stage: Awaiting validation Find awaiting validation
Decorative copper alloy terminal or handle of uncertain date, possibly post medieval The item is part of a composite object (with a length of 35.9mm and a weight of 8.4g). The object is hollow and contains remnants of a shaft, probably of wood. The mouth is now distorted and closed (with a length of 14.2mm and a compressed thickness of 4.2mm). The object then narrows before flaring out at the rounded and thickened end (with a maximum thickness of 10.6mm). The object has a corroded perforation on one side and one face has a decorative incised border, now worn. The surface is dark grey…
Created on: Wednesday 3rd August 2011
Last updated: Wednesday 10th August 2011
No spatial data available.


  • Thumbnail image of PUBLIC-918A27

Record ID: PUBLIC-918A27
Object type: BROOCH
Broad period: ROMAN
County: Monmouthshire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy bow brooch of Dolphin type and of 1st century AD date The brooch is near-complete, missing the end of the pin (with a length of 78.3mm, a depth of 23mm and a weight of 23.8g). The pin is hinged within tubular wings (with a width of 33.3mm) of oval to circular section (6.4mm - 7.3mm diameter). The axis bar is of copper alloy and secures the sub-triangular pin head (10mm wide and 2.2mm thick). The circular-sectioned pin gradually thins to the break (with a maximum diameter of 3.3mm and minimum diameter of 2.2mm). The fronts of the wings are decorated near the termina…
Created on: Wednesday 3rd August 2011
Last updated: Wednesday 10th August 2011
Spatial data recorded.


  • Thumbnail image of PUBLIC-7BE2B7

Record ID: PUBLIC-7BE2B7
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval copper alloy pin terminal from a brooch, probably of penannular or pseudo-penannular type and of 8th or 9th century date The pin is fragmentary and is represented by the head only (with a surviving length of 20.0mm, a maximum surviving width of 17.2mm, and a weight of 3.3g). The head is of sub-triangular form although the periphery is corroded and some of the detail has been lost. There appears to have been three lentoid lobes or crescentic cups, two of which survive. The central panel is circular (11.3mm diameter) and is recessed. Within the circular panel is a simpl…
Created on: Tuesday 2nd August 2011
Last updated: Tuesday 13th September 2011
No spatial data available.


  • Thumbnail image of PUBLIC-68D578

Record ID: PUBLIC-68D578
Object type: BELL
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy bell, probably of post medieval date, c. 18th century The bell is near complete, missing the clapper with some damage around the top (with a length of 58mm and a weight of 80.9g). The integral rectangular loop is irregular (13mm tall, 14.4mm wide and 6.5m thick); enclosing an oval perforation (8.3mm long and 5.6mm wide). The apex of the loop on one side is heavily worn with a concave facet. The top of the bell has two circular perforations (3.6mm and 3.9mm diameter) surrounded by iron corrosion, presumably where a wire was attached to the missing clanger. The other side…
Created on: Monday 1st August 2011
Last updated: Tuesday 2nd August 2011
Spatial data recorded.


  • Thumbnail image of PUBLIC-2A8A01

Record ID: PUBLIC-2A8A01
Object type: BROOCH
Broad period: ROMAN
County: Newport
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy bow brooch of Trumpet type and of 1st or 2nd century AD date The brooch is fragmentary and represented by the upper bow and top of the leg only (with a surviving length of 36.3mm, a depth of 15.4mm and a weight of 10.8g). The missing spring was secured around a central perforated lug, the stubs of which are still present. The trumpet head is corroded and worn but appears to have been of sub-oval to sub-triangular form (with a width of 12.9mm and a depth of 13.2mm). Little of the original surface survives but a punched-dot border is evident on one side. The side…
Created on: Friday 29th July 2011
Last updated: Wednesday 10th August 2011
No spatial data available.


  • Thumbnail image of PUBLIC-2983D4

Record ID: PUBLIC-2983D4
Object type: AMPULLA
Broad period: MEDIEVAL
County: Pembrokeshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval lead pilgrim's ampulla of 14th to 16th century date The ampulla is near complete, (with a length of 56.8mm and a weight of 80.7mm) but with some peripheral damage around the mouth edge. The mouth is expanded, (with a width of 23.3mm) and is open. The sides of the neck are straight and converge to the lower chamber (with a width of 35.4mm). On one side there is a formed suspension loop, on the opposite side the loop is visible but with no perforation and is slightly higher than the other loop, suggesting a mis-casting. There is a split along the casing seam on the same side a…
Created on: Friday 29th July 2011
Last updated: Tuesday 2nd August 2011
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 659
Search server index: asgard

You are viewing records: 101 - 120.

Search statistics

  • Total quantity: 659
  • Mean quantity: 1.000
  • Maximum: 1

Filter your search

Institution

101 - 120 of 659 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.