Record ID: SWYOR-C9C9C4
Object type: STRAP FITTING
Broad period: ROMAN
County: Leeds
Workflow stage: Awaiting validation
A solid copper alloy strap fitting, probably a strap slide or toggle of Roman date, AD 43 - 410. It is circular with a convex or domed front surrounded by a groove and then a raised rim. There is a narrow groove around the side, towards the back. The back is flat with an integral sub-rectangular tab projecting, perforated by an oval hole. The measurements are; diameter 14.9mm, thickness 13.3mm, and weight 6.27g. Compare SWYOR-F35009
Created on: Monday 26th February 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Leeds', grid reference and parish protected.

Record ID: SWYOR-C99B74
Object type: BROOCH
Broad period: ROMAN
County: Leeds
Workflow stage: Awaiting validation
An incomplete, copper alloy Roman brooch of the Colchester one-piece type, dating from AD 25 - 60.  It has a plain, curved, undecorated bow of oval cross-section, tapering to a point at the foot. The wings are flat and rectangular. Some of the spring survives, with three turns remaining on one side, and one on the other, and there is an external chord held under a forward hook. There is an iron axis bar. The pin is missing, as is the catch plate. The patina is dark green. The measurements are; length 46.6mm, width 15.9mm, thickness 21.2mm, and weight …
Created on: Monday 26th February 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Leeds', grid reference and parish protected.

Record ID: SWYOR-C9ABFB
Object type: BROOCH
Broad period: ROMAN
County: Leeds
Workflow stage: Awaiting validation
An incomplete, copper alloy Roman brooch of the Colchester one-piece type, dating from AD 25 - 60. It has a plain, undecorated bow of oval cross-section. The bow is strongly curved (through post depositional damage?) and there are two narrow, rectangular wings. There is a complete forward hook, but the spring and pin are missing, as is the catchplate. The measurements are; length 35.7mm, width 9.2mm, thickness 25.4mm, and weight 3.16g. Similar brooches are illustrated in Hattat, 1989 Ancient Brooches and Other Artefacts, page 296. See also&…
Created on: Monday 26th February 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Leeds', grid reference and parish protected.

Record ID: SWYOR-0B7D43
Object type: COIN
Broad period: ROMAN
County: Wakefield
Workflow stage: Awaiting validation
A copper alloy Roman coin; an illegible as or dupondius of an unidentified emperor, dating from 23 BC to AD 260. It is 26.7mm in diameter and 3.2mm thick. It weighs 11.75g.
Created on: Monday 5th February 2024
Last updated: Monday 8th April 2024
Spatial data recorded.

Record ID: SWYOR-0FEE56
Object type: BRACELET
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
A fragment of a copper alloy artefact, possibly the hooked terminal of a Roman bracelet dating from AD 250 - 400, but it is too fragmentary to be sure. It is a rectangular strip of copper alloy which is 1.9mm thick. One end is broken and the other end tapers to a sharp point. the tapering end is also bent into an S shape. There is no decoration. It is 20.8mm long, 8.9mm wide and 5.5mm thick. it weighs 2.3g. Compare bracelets with hooked terminals in Crummy (1983), page 42.
Created on: Monday 6th February 2023
Last updated: Monday 8th April 2024
Spatial data recorded.

Record ID: SWYOR-657EC7
Object type: COIN
Broad period: ROMAN
County: Doncaster
Workflow stage: Awaiting validation
A copper alloy Roman coin; a contemporary copy (barbarous radiate) of a radiate dating from AD 275 - 285 (Reece Period 14), possibly imitating a radiate of Tetricus I dating from AD 271 - 274, Mint 1, VIRTVS AVG reverse type depicting Virtus standing left holding shield and spear. The coin is 9.9mm in diameter, 1.2mm thick and weighs 0.57g.
Created on: Monday 24th April 2023
Last updated: Friday 22nd March 2024
Spatial data recorded.

Record ID: SWYOR-677F48
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
An illegible copper alloy Roman coin; a nummus or radiate dating from AD 260 - 410. The coin is 15.5mm in diameter, 1.4mm thick and weighs 1.16g.
Created on: Monday 24th April 2023
Last updated: Friday 22nd March 2024
Spatial data recorded.

Record ID: SWYOR-A640CA
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
A copper alloy Roman coin; an illegible radiate or nummus dating from AD 260 - 402. The object is 12.6mm in diameter, 1.1mm thick and weighs 0.72g.
Created on: Thursday 27th April 2023
Last updated: Friday 22nd March 2024
Spatial data recorded.

Record ID: SWYOR-4153EE
Object type: COIN HOARD
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Published
A disturbed hoard of 5 late roman silver coins; five siliquae found within 2.5m square, about 8-12 inches deep, dating between AD 355 to 402 and probably deposited between AD 395 and AD 430.   A further two coins were discovered in Dec 2022 - Feb 2023 and declared in 2023 as addenda (2023 T133). They fit into the same date range. Coin 1 (Image 4). A clipped silver Roman siliqua of Constantius II (AD 337-361), dating from about AD 359-361 (Reece period 18). VOTIS/XXX/MVLTIS/XXXX reverse type depicting the legend ove…
Created on: Tuesday 5th July 2022
Last updated: Wednesday 20th March 2024
Spatial data recorded. This findspot is known as 'Husthwaite', grid reference and parish protected.

Record ID: SWYOR-C66974
Object type: BROOCH
Broad period: ROMAN
County: Doncaster
Workflow stage: Awaiting validation
An almost complete copper Roman fantail brooch, a type of hinged Trumpet brooch dating from AD 75 - 175. It fits into Mackreth Trumpet 4.1bx group. The integrally cast headloop is incomplete. The wings are rectangular and hide a tubular housing for the copper alloy axis bar. Only the top of he hinged pin survives. The upper bow is plain and D shaped in cross-section. There is no central moulding or plate of any kind. The lower bow flares into a fantail foot. It is decorated with three triangular cells filled withtraces of blue enamel. The catchplate is incomplete, but cu…
Created on: Monday 26th February 2024
Last updated: Monday 11th March 2024
Spatial data recorded.

Record ID: SWYOR-C7BE59
Object type: VESSEL
Broad period: ROMAN
County: Rotherham
Workflow stage: Awaiting validation
A rim sherd of a ceramic vessel, probably Black Burnished ware of Roman date, AD 43 - 410. It is a rim sherd from a bowl with a dropped flange. The fabric is relatively fine grained, hard and dark grey throughout. It has a very dark grey slip on the exterior surface although the interior has been left plain and coarse. There are sub-rounded to sub-angular translucent quartz inclusions. The flange is dropped below the pointed rim. Measurements are; length 48.6mm, height 31.4mm, thickness 20.1mm and weight 18.20g. The internal rim diameter is about 160mm, estimated from less than 10% o…
Created on: Monday 26th February 2024
Last updated: Monday 11th March 2024
Spatial data recorded.

Record ID: SWYOR-C88BBC
Object type: GAMING PIECE
Broad period: ROMAN
County: Doncaster
Workflow stage: Awaiting validation
A stone possible gaming piece of possible Roman date, AD 43 - 410. The object is formed from a very smooth circular pebble, identified by the finder as Cornish greenstone. The pebble has two shallowly convex faces and rounded sides. It would have functioned well as a counter or gaming piece. It may have been naturally formed but collected for use as a playing piece. Measurements are; diameter 24.3mm, thickness 7.5mm and weight 6.74g. The stone is dark brown, fine grained and smooth, but with a slightly pitted surface under magnification. There appears to be a high quartz content.…
Created on: Monday 26th February 2024
Last updated: Monday 11th March 2024
Spatial data recorded.

Record ID: SWYOR-C8D4AA
Object type: VESSEL
Broad period: ROMAN
County: Doncaster
Workflow stage: Awaiting validation
A lead pot mend and a fragment of the ceramic vessel, of probable Roman date, AD 43 - 410. The mend is two discs of lead, one large and oval and one smaller and nearly square. They are joined by a short stem (making the mend H shaped in cross-section) through a hole in the ceramic vessel. Some of the ceramic fabric survives. It appears to be a greyware with frequent quartz inclusions, suggesting a Roman date. Measurements are; length 28.3mm, width 24.2mm, thickness 9.9mm and weight 22.87g.
Created on: Monday 26th February 2024
Last updated: Monday 11th March 2024
Spatial data recorded.

Record ID: SWYOR-C72AE0
Object type: COIN
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Awaiting validation
A copper alloy Roman coin; an illegible nummus dating from AD 330 - 402. Bust right obverse and standing figure reverse. Measurements are; diameter 11.8mm, thickness 1.1mm and weight 0.52g.
Created on: Monday 26th February 2024
Last updated: Saturday 9th March 2024
Spatial data recorded.

Record ID: SWYOR-C78A31
Object type: VESSEL
Broad period: ROMAN
County: Rotherham
Workflow stage: Awaiting validation
Seven sherds of Roman ceramic; greyware, all found in the same field within 20 metres, dating from AD 43 - 410. 1. length 53.1mm, width 37.8mm, thickness 9.1mm and weight 17.03g. Wall sherd. Fine texture, fairly hard, black rounded and quartz inclusions. 2. height 30.7mm, width 52mm, thickness 31.5mm and weight 58.57g. Rim sherd. Abraded, fine texture, fairly hard. Frequent quartz and tiny black inclusions. Thick beaded rim. Rim diameter about 300mm or more, estimated from about 5% of the perimeter. 3. height 48.2mm, width 57.4mm, thickness 22.8mm and weight 50.15g. L…
Created on: Monday 26th February 2024
Last updated: Friday 8th March 2024
Spatial data recorded.

Record ID: SWYOR-C68C69
Object type: BROOCH
Broad period: ROMAN
County: Doncaster
Workflow stage: Awaiting validation
An incomplete copper alloy Roman brooch, a type of hinged Trumpet brooch dating from AD 75 - 175. The integrally cast headloop is missing. The wings are worn but rectangular and hide an incomplete tubular housing for the missing axis bar. The hinged pin does not survive but there is a slot for its head to fit into. The upper bow is plain and D shaped in cross-section. The central knop is replaced by a flat lozenge shaped plate, with a recessed ring containing traces of enamel. The lower bow is missing. It could be a fantail type. The brooch is very worn. Compar…
Created on: Monday 26th February 2024
Last updated: Thursday 7th March 2024
Spatial data recorded.

Record ID: SWYOR-C8BF99
Object type: BROOCH
Broad period: ROMAN
County: Doncaster
Workflow stage: Awaiting validation
An incomplete cast copper alloy Roman brooch, a hinged heastud type, dating from around AD 100 - 225. It is of Mackreth Headstud group 8b.  The brooch consists of a small tubular case on the back of the wings for a copper alloy axis bar and hinged copper alloy pin which is missing apart from the top. The mechanism is masked by short wings with enamelled lattice in red and white on their front. There is a crest or pseudo forward hook on the top of the bow.  There is a circular recess that would have housed the missing headstud at the top …
Created on: Monday 26th February 2024
Last updated: Thursday 7th March 2024
Spatial data recorded.

Record ID: SWYOR-C879E4
Object type: COIN
Broad period: ROMAN
County: Rotherham
Workflow stage: Awaiting validation
An incomplete small copper alloy illegible Roman coin, probably a radiate or nummus dating from AD 260 - 402. Both faces are illegible. Length: 15.09mm Width: 12.6mm Thickness: 1.96mm Weight: 1.36g
Created on: Monday 26th February 2024
Last updated: Thursday 7th March 2024
Spatial data recorded.

Record ID: SWYOR-360C1D
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation
A copper-alloy Roman coin; a nummus of the House of Constantine (AD 307-361), of Constantius II, dating from AD 355 - 361 (Reece period 18). [FEL TEMP REPARATIO] reverse type depicting a soldier spearing a fallen horseman. Mint of Lugdunum: CPLG. Part of the edge of the coin is missing. Measurements are; diameter 17.8mm, thickness 1.5mm and weight 1.42g.
Created on: Monday 19th February 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded.

Record ID: SWYOR-3615B4
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation
A copper-alloy Roman coin; a nummus of the House of Constantine (AD 307-361), probably Constantius II, dating from AD 355 - 361 (Reece period 18). [FEL TEMP REPARATIO] reverse type depicting a soldier spearing a fallen horseman. Unclear mint.  Measurements are; diameter 18.8mm, thickness 1.6mm and weight 1.71g.
Created on: Monday 19th February 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded.