Back to simple search | Back to advanced search

    You searched for:

    • IdentifierID: PAS4BA750C30010F2

  • Thumbnail image of SWYOR-B7CBBA

Record ID: SWYOR-B7CBBA
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A lead perforated weight of probably Post Medieval to Modern date, about AD 1500 - 1900. It is flat and rectangular in section, and an elongated octagon in plan. There is a keyhole shaped hole through the weight at one end (rounded at one end and narrower and rectangonal at the other); it is not clear whether it was always intended to be this shape, or whether it has been worn by suspension on a loop or rope. The edges and corners of the weight are worn and rounded. This may be from water damage, since the weight was found near a river. This has led to speculation that the weight may h…
Created on: Thursday 21st June 2018
Last updated: Thursday 21st June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-B6E981

Record ID: SWYOR-B6E981
Object type: ARMLET
Broad period: BRONZE AGE
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy armlet or bracelet probably dating from the Later Bronze Age, about 1000 BC - 800 BC. It is a penannular loop with flared, expanding terminals. These are close together, leaving a gap of only about 4-6mm between them. Each terminal is circular and the ends are concave or hollow. The inner face of one terminal is rough and corroded and has gravel adhering to the concretion. The outer sides of the terminals are straight, flaring from the armlet hoop to the widest point of the terminals at the very end. The hoop is mainly D shaped in cross section and varies in diameter. It…
Created on: Thursday 21st June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-E8926F

Record ID: SWYOR-E8926F
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Published Find published
A copper-alloy Roman barbarous radiate, copying a coin of uncertain Gallic Emperor, possibly Victorinus (AD 269-271) or Tetricus I (AD 271-274), dating to the period AD 275-285 (Reece period 14). Reverse type depicting Uncertain standing figure left holding globe(?) and vertical sceptre, possibly a PRINC IVVENT or similar type. Uncertain mint. The coin is rectangular in form and measures 11.6mm in length, 11.1mm in width, 1.5mm in thickness, and 1.01g in weight.
Created on: Monday 11th June 2018
Last updated: Monday 18th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-E78C8E

Record ID: SWYOR-E78C8E
Object type: COIN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A silver Medieval coin; a voided long cross penny of Henry III (AD 1216 - 1272), Class Vg dating from about AD 1258 - 1265. It was minted at London by Renaud. The coin is 18mm diameter, 0.6mm thick and 1.27g. See North Volume 1 page 227, number 997.
Created on: Monday 11th June 2018
Last updated: Monday 11th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-D39B44

Record ID: SWYOR-D39B44
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment from a copper alloy Early Medieval harness mount or brooch, dating from about AD 560 - 700. Only about an eighth of the disc survives, assuming it was circular. The fragment has one original curved edge which is stepped with a narrow, thin outer border, then a wide plain border, slightly proud of the central design and outer band. The main design is formed of triple stranded zoomorphic interlace in relief; the central strand appears beaded from the use of transverse punches. Parts of the design have just one or two strands, some plain, and some beaded. The object is too frag…
Created on: Tuesday 29th May 2018
Last updated: Tuesday 19th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-D0ECF4

Record ID: SWYOR-D0ECF4
Object type: BARBED AND TANGED ARROWHEAD
Broad period: BRONZE AGE
County: Calderdale
Workflow stage: Awaiting validation Find awaiting validation
A flint barbed and tanged arrowhead dating from the Beaker Period to the Middle Bronze Age, about 2400 BC - 1000 BC. It is formed on opaque light grey flint with some speckles of partial patination. It is ogival with two rounded notches worked in the base. The barbs have rounded or curved sides. It has covering, scaled, low-angle retouch on both faces. It is 27.4mm long, 22.1mm wide 3.8mm thick and 1.74g. The shape and style matches that of SWYOR-012B37.
Created on: Tuesday 29th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-D0D41C

Record ID: SWYOR-D0D41C
Object type: BARBED AND TANGED ARROWHEAD
Broad period: BRONZE AGE
County: Calderdale
Workflow stage: Awaiting validation Find awaiting validation
An incomplete flint barbed and tanged arrowhead dating from the Beaker Period to the Middle Bronze Age, about 2400 BC - 1000 BC. It is formed on opaque light grey flint with some speckles of partial patination. It is triangular with two triangular notches worked in the base. The point and one barb are missing and the breaks are also partially patinated. It has covering, scaled, low-angle retouch on both faces. It is 20.9mm long, 18.9mm wide and 3.4mm thick. 0.95g. It has been labelled as a Sutton type.
Created on: Tuesday 29th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-D0B745

Record ID: SWYOR-D0B745
Object type: BARBED AND TANGED ARROWHEAD
Broad period: BRONZE AGE
County: Calderdale
Workflow stage: Awaiting validation Find awaiting validation
A flint barbed and tanged arrowhead dating from the Beaker Period to the Middle Bronze Age, about 2400 BC - 1000 BC. It is formed on semi-translucent buff to pink coloured flint with some speckles of partial patination. It is triangular with two rounded notches worked in the base and is complete. It has covering, scaled, low-angle retouch on both faces. It is 32.9mm long, 26.5mm wide and 4.3mm thick. 2.43g. It has been labelled as a Green Low Type.
Created on: Tuesday 29th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-D02D1A

Record ID: SWYOR-D02D1A
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman headstud brooch dating from AD 75 - 200. Only the head of the brooch survives. It has the remains of an integral cast headloop, rectangular wings that hide a tubular housing for a copper alloy axis bar, and the remains of an iron pin. The front of the wings are decorated with two vertical ridges on each wing. There is an integral cast headstud which is oval with a ring shaped cell for enamel, the colour of which is indistinct. The upper bow has a rectangular recess along the centre filled with squares of alternately coloured enamel. Only two squares sur…
Created on: Tuesday 29th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-9C2E89

Record ID: SWYOR-9C2E89
Object type: CANNON BALL
Broad period: POST MEDIEVAL
County: Rotherham
Workflow stage: Awaiting validation Find awaiting validation
A complete cast iron probable shot or cannon ball dating from the post-medieval period, about AD 1500-1700. It is a sphere of iron, with a slightly pited and corroded surface, dark brown in colour. It is 39.5mm diameter (1,5 inches) and has a mass of 235g (eight and a quarter ounces). It may have been itended for use in a Serpentine cannon which had a nominal bore size of 1.5 inch diameter, firing shot weighing 0.75 lb, or a Rabinet cannon which fired shot weighing 8oz. Corrosion may have altered the size and weight of this example. Compare SOM-A0A8A2 which cites Blackmore (1990) Arms…
Created on: Saturday 26th May 2018
Last updated: Wednesday 30th May 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-86EB1D

Record ID: SWYOR-86EB1D
Object type: MICROLITH
Broad period: MESOLITHIC
County: Calderdale
Workflow stage: Awaiting validation Find awaiting validation
A mesolithic flint microlith dating from 8000 BC - 4000 BC. It is a damaged Group B geometric microlith of trapezoid shape. It is formed on mottled opaque white and grey flint and is water worn. There is short, sub-parallel, abrupt retouch on the long side, and some similar visible on the opposite edge, but damaged by pieces of the flint missing. It is 14.3mm long, 6.1mm wide and 3,3mm thick. 0.2g.
Created on: Friday 25th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-86CD4C

Record ID: SWYOR-86CD4C
Object type: DEBITAGE
Broad period: UNKNOWN
County: Calderdale
Workflow stage: Awaiting validation Find awaiting validation
Eight flint debitage flakes of Mesolithic or Neolithic date, about 9000 BC - 2200 BC. They are formed on a tertiary or secondary flakes of light grey flint, some with partial patination. One is crazed and whitened, perhaps from heat, and half the ventral face has a battered rough texture.
Created on: Friday 25th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-869F3D

Record ID: SWYOR-869F3D
Object type: DEBITAGE
Broad period: UNKNOWN
County: Calderdale
Workflow stage: Awaiting validation Find awaiting validation
A flint debitage flake of Mesolithic or Neolithic date, about 9000 BC - 2200 BC. It is formed on a tertiary flake of opaque speckled grey flint. It is sub-rerctangular in plan and triangular in cross section. The flake is 28.2mm long, 14.8mm wide and 4.2mm thick. 1.6g.
Created on: Friday 25th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-868D36

Record ID: SWYOR-868D36
Object type: DEBITAGE
Broad period: UNKNOWN
County: Calderdale
Workflow stage: Awaiting validation Find awaiting validation
A flint debitage flake of Mesolithic or Neolithic date, about 9000 BC - 2200 BC. It is formed on a tertiary flake of mid grey flint. It is sub-rerctangular in plana nd D shaped in cross section. There are previous removal scars on the dorsal face, particularly at the distal left side. There is also some platform dressing. The flake is 27.6mm long, 12.8mm wide and 6.9mm thick. 2.37g.
Created on: Friday 25th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-866360

Record ID: SWYOR-866360
Object type: RETOUCHED FLAKE
Broad period: UNKNOWN
County: Calderdale
Workflow stage: Awaiting validation Find awaiting validation
A flint retouched chunk of Mesolithic or Neolithic date, about 9000 BC - 2200 BC. The chunk does not have an obvious striking platform or bulb of percussion, but does appear to have previous removal scars and since flint is not naturally occuring in the Pennines, it does appear to be a worked flint. It is formed on yellow grey flint. There is a patch of cortex at one end. On the other side of the same end is a stretch of either edge damage or fine retouch which is short, sub-parallel and low angle. This could also be interpreted as abrasion, backing or platform dressing. The retouched…
Created on: Friday 25th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-863564

Record ID: SWYOR-863564
Object type: CORE
Broad period: MESOLITHIC
County: Bradford
Workflow stage: Awaiting validation Find awaiting validation
A chert core of Mesolithic date, about 9000 BC - 4000 BC. It is conical, with (probably) a single striking platform producing narrow blades. It is formed on dark grey chert. It is 18.2mm long, 12.9mm wide and 8.7mm thick.1.66g.
Created on: Friday 25th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-862395

Record ID: SWYOR-862395
Object type: CORE
Broad period: MESOLITHIC
County: Bradford
Workflow stage: Awaiting validation Find awaiting validation
A flint core of Mesolithic date, about 9000 BC - 4000 BC. It is cylindrical, with two opposed striking platforms (bi-polar) producing narrow blades. It is formed on grey flint with a small patch of cortex surviving. It is 17.3mm long, 8.1mm wide and 7mm thick. 1.03g.
Created on: Friday 25th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-860BFC

Record ID: SWYOR-860BFC
Object type: CORE
Broad period: MESOLITHIC
County: Bradford
Workflow stage: Awaiting validation Find awaiting validation
A flint core of Mesolithic date, about 9000 BC - 4000 BC. It is sub-cylindrical, with two, more-or-less opposed striking platforms (bi-polar) producing narrow blades. It is formed on grey flint with a small strip of cortex surviving. It is 21.3mm long, 17.3mm wide and 13,2mm thick. 4.97g.
Created on: Friday 25th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-85EE36

Record ID: SWYOR-85EE36
Object type: RETOUCHED FLAKE
Broad period: UNKNOWN
County: Bradford
Workflow stage: Awaiting validation Find awaiting validation
A flint, retouched flake of Mesolithic or Neolithic date, about 9000 BC - 2200 BC. It is sub-rectangular in plan, and triangular in cross-section. It is formed on a tertiary flake of light grey coloured flint. There is short, sub-parallel, low angle retouch on the ventral face at the distal end. There are also previous removal scars on the dorsal face and left side, so the piece could eb a core rejuvenation flake. The flint is 10.5mm long, 16.3mm wide and 5.6mm thick. 0.79g.
Created on: Friday 25th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-85C9BD

Record ID: SWYOR-85C9BD
Object type: MICROLITH
Broad period: MESOLITHIC
County: Bradford
Workflow stage: Awaiting validation Find awaiting validation
A flint, late Mesolithic probable Group B geometric microlith, dating from 8000 BC - 4000 BC. It is a scalene triangle in plan, but unusual that the long edge is also the striking platform. It is formed on a tertiary flake of translucent light yellow grey coloured flint which was partially patinated before being worked. There is short, scaled, semi-abrupt retouch on the dorsal face at the proximal end. The microlith is 3.8mm long, 9mm wide and 2.5mm thick. 0.06g. The unusual arrangement of retouch on the proximal end could suggest that it is, in fact, platform preparation on a debitage flake.
Created on: Friday 25th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 10,873
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 14,733
  • Mean quantity: 1.355
  • Maximum: 595

Filter your search

1 - 20 of 10,873 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.