Back to simple search | Back to advanced search

    You searched for:

    • IdentifierID: 0014AC3448C01765
    • Thumbnail: Only records with images please
    • Show this many records per page: 100

  • Thumbnail image of WMID-5A5AB7

Record ID: WMID-5A5AB7
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver half groat of Edward III (AD 1327 to 1377), dating to the period AD 1354 to AD 1355. Minted at York as part of the Fourth Coinage, pre-treaty Series E. Annulet Stops. C.f. North vol 2, p 51, no 1166. Diameter: 24.1 mm Thickness: 0.8 mm Weight: 2.3 g
Created on: Monday 22nd July 2019
Last updated: Monday 22nd July 2019
Spatial data recorded.


  • Thumbnail image of WMID-5A0855

Record ID: WMID-5A0855
Object type: CURTAIN FITTING
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy ring or loop which functioned as a curtain fitting, of Post Medieval dating (15th to 17th Centuries AD). It is sub-circular in shape with a rectangular cross section with bevelled edges. In profile the loop is flat. It measures 18.0 mm external diameter, 12.0 mm internal diameter and 2.2 mm thick. The ring is 3.2 mm wide. It weighs 1.3 grams. The curtain fitting is a dark green colour, with an even surface patina. Similar rings are illustrated in Margeson (1993, p. 82, Fig 47, #522-524). Margeson describes them as being suspension rings which were probably m…
Created on: Monday 22nd July 2019
Last updated: Monday 22nd July 2019
Spatial data recorded.


  • Thumbnail image of WMID-59DFF7

Record ID: WMID-59DFF7
Object type: KNIFE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy bolster from a scale tang knife, of Medieval to Post Medieval dating (AD 1200 to AD 1600). The knife bolster is sub triangular in shape, with a rectangular cross section. The top of the end cap has a rectangular slot cut into it, with slightly diagonal lines.The base has a sub rectangular central hole (9.2 mm by 4.6 mm). No decoration is present on any side. This slot would have secured the tang of the knife. It measures 16.8 mm in length, 14.0 mm wide and 5.0 mm thick. It weighs 3.6 g. The bolster is a dark green colour with an even surface patina. Scale ta…
Created on: Monday 22nd July 2019
Last updated: Monday 22nd July 2019
Spatial data recorded.


  • Thumbnail image of WMID-59C5CC

Record ID: WMID-59C5CC
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy single looped oval buckle frame and pin with a debased ornate outside edge style, typically of late 12th to late 14th Centuries AD (c. 1150 to c. 1350 AD) It consists of a oval frame, with an narrow offset bar, with a recess for the leather strap. The pin is present and consists of a piece of rolled copper metal into a cylinder, wrapped around the offset bar. The point is blunt. The front of the buckle has moulded decoration, along the outside edge, the reverse is flat and undecorated. The decoration consists of three horizonal incised slits across the outer ed…
Created on: Monday 22nd July 2019
Last updated: Monday 22nd July 2019
Spatial data recorded.


  • Thumbnail image of WMID-59A279

Record ID: WMID-59A279
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete asymmetrical double looped buckle frame, of Post Medieval dating (AD 1575 - AD 1700). Around 50% of the buckle frame is present, with the rounded loop only being present. The loop is expanded in the centre, and narrows towards the edges. No decoration is visible on the rounded end. The strap bar in the centre has been narrowed. The reverse is undecorated. It measures 24.6 mm in length, 27.5 mm wide and 2.7 mm thick. It weighs 3.1 g. The buckle frame is a dark green colour, with an even surface patina. Several similar buckle frames have been recorded on the PAS databas…
Created on: Monday 22nd July 2019
Last updated: Monday 22nd July 2019
Spatial data recorded.


  • Thumbnail image of WMID-5978E8

Record ID: WMID-5978E8
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy double looped trapezoidal buckle of Post Medieval dating (AD 1620 -AD 1680). Around 50% of the buckle is present, consisting of one outer loop. The outer loop is sub rectangular in shape. The surviving outer loop has a trefoil shaped end and a lobed protrusion at either end of the narrowed strap bar. The buckle measures 22.9 mm in length, 27.9 mm wide and is 2.1 mm thick. It weighs 2.6 g. The buckle is brown in colour, with an even surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in the loss of some of the surface de…
Created on: Monday 22nd July 2019
Last updated: Monday 22nd July 2019
Spatial data recorded.


  • Thumbnail image of WMID-5942E6

Record ID: WMID-5942E6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy single-looped buckle dating to the Medieval period (c. AD 1350-1400). The buckle consists of a single-loop sub-rectangular frame with expanded outer edges. The two vertical bars are offset; the outermost retains a sheet metal roller, whilst the innermost bar is recessed for the strap plate. The pin is now missing. The buckle is undecorated It measures 14.7 mm in length, 15.0 mm wide and 4.3 mm thick. It weighs 2.3 g. The buckle has a mid-green patina. A similar example can be seen in Whitehead no. 140 (1996: 27). A similar buckle has been recorded on the …
Created on: Monday 22nd July 2019
Last updated: Monday 22nd July 2019
Spatial data recorded.


  • Thumbnail image of WMID-5924DB

Record ID: WMID-5924DB
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy single loop buckle frame, of Medieval dating (AD1250 to AD 1500). Only the buckle frame is present, the pin is missing. The buckle has a sub oval frame, with an expanded outside edge. The strap bar is narrowed. The buckle measures 19.8 mm in length, 31.6 mm wide and 2.0 mm thick. It weighs 2.3 g. The buckle is a mid green colour, with an even surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the original surface detail. A similar buckle frame has been recorded on the PAS database as WMID-716911.
Created on: Monday 22nd July 2019
Last updated: Monday 22nd July 2019
Spatial data recorded.


  • Thumbnail image of WMID-582D41

Record ID: WMID-582D41
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy buckle or brooch pin, from an annular buckle or brooch, of Medieval dating (AD 1150 to AD 1400). Around 95% of the buckle or brooch pin is present, with the loop incomplete. The pin is rectangular in shape and cross section. It tapers to a blunt point. One ridge is present at the junction between the loop and the pin shaft. The loop would have originally been circular in shape. The buckle or brooch pin measures 45.1 mm in length, 4.0 mm wide and is 12.0 mm thick. It weighs 4.7 g. The buckle or brooch pin is a dark green colour, with an even surface patina.
Created on: Monday 22nd July 2019
Last updated: Monday 22nd July 2019
Spatial data recorded.


  • Thumbnail image of WMID-484A02

Record ID: WMID-484A02
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Isle of Anglesey
Workflow stage: Awaiting validation Find awaiting validation
A probable incomplete lead alloy artefact of uncertain function, but probably of Post Medieval dating (AD 1700 to AD 1900). It is of a pointed oval shape. Although it looks like it is a two part artefact with one side fitting inside the other, it has been cast in one piece. Foliate decoration around the outside. Circular knops are on either side and the top crosses over and then splits into two separate prongs, with the ends incomplete. It measures 89.1 mm in length, 65.2 mm wide and 7.4 mm thick. It weighs 83.2 g. It is a light to dark grey colour, with an uneven surface patina.
Created on: Tuesday 9th July 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-480A86

Record ID: WMID-480A86
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Isle of Anglesey
Workflow stage: Awaiting validation Find awaiting validation
A complete annular copper alloy artefact, of probable Post medieval dating (AD 1500 to AD 1700). The artefact is circular in shape and flat. The back is undecorated. The front has foliate style decoration. No signs of a pin rest or slot are present. It has a diameter of 34.8 mm and an internal diameter of 21.7 mm. The frame is 6.9 mm wide and 1.1 mm thick. It weighs 3.5 g. The artefact is a dark green colour, with an even surface patina. No direct identification of this artefact was possible at the time of recording. It is possible that it is an annular brooch frame but as there a…
Created on: Tuesday 9th July 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-47CBE0

Record ID: WMID-47CBE0
Object type: VESSEL
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy foot / leg from a copper alloy cooking vessel of Late Medieval to Early Post Medieval dating (AD 1400 - AD 1700). The vessel fragment is sub rectangular in shape and sub rectangular in cross section. It consists of a straight body, with an external central rib. The internal surface is rough. At the top of the leg, an irregular surface is present, this would have adjoined to the base of the cauldron. The base of the foot is slightly abraded. It measures 53.3 mm in length, 37.1 mm wide and 13.3 mm thick. It weighs 105.5 grams. The vessel foot / leg is predom…
Created on: Tuesday 9th July 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-47AB4E

Record ID: WMID-47AB4E
Object type: WEIGHT
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete lead or lead alloy standing / pyramidal weight, of Medieval to Post Medieval dating (AD 1200 to AD 1600). The weight has a concave circular base, which dips in the middle. The sides taper inwards towards the top. It measures 26.3 mm in height, 26.8 mm wide and 23.4 mm thick. It weighs 61.4 g or 2.17 oz. It is a light to mid grey colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the original surface detail. Several similar pyramidal /suspension weights have been recorded on the PAS data…
Created on: Tuesday 9th July 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-479108

Record ID: WMID-479108
Object type: CLOTH SEAL
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A lead or lead alloy rivet from a cloth or bag seal, of Late Medieval to Early Post medieval dating (15th to 17th Centuries AD). One disc of either a two or four part seal is present, consisting of the rivet end. The rivet is conical shaped, but now bent over and not straight. It has a circular base, with a small rectangular strip at one side. This strip would have attached it to the other discs in the cloth or bag seal. The rivet has a base diameter of 12.0 mm and is 8.6 mm tall. It weighs 2.3 g. The rivet is a light grey colour, with an even surface patina. More complete examples…
Created on: Tuesday 9th July 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-4769FE

Record ID: WMID-4769FE
Object type: SHOT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead alloy shot or ball, of Post Medieval dating (17th to 18th Centuries AD). The shot is circular in shape, but both front and back are flattened, preventing it from being fully spherical. The attachment sprue is still present at the top of the shot, and the casting line from the mould is present around the edge of the shot. It has a diameter of 18.9 mm, and is 16.4 mm thick. It weighs 29.5 g. The shot is a dark grey colour, with an even surface patina.
Created on: Tuesday 9th July 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-46E526

Record ID: WMID-46E526
Object type: LEAF ARROWHEAD
Broad period: NEOLITHIC
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete knapped or flaked flint leaf shaped arrowhead, of Neolithic dating (c. 3500 BC to c. 2500 BC). The arrowhead is approximately 95% complete, missing a small fragment from the bottom. The arrowhead is leaf shaped in plan, consisting of a pointed oval shape.. It has been made from a piece of tertiary debitage as no cortex (outer rind) is visible on either the dorsal (upper) and ventral (lower) faces. Both dorsal and ventral face exhibit controlled flaking. The ventral face just has the retouch along the edge, whereas on the dorsal face, it covers the surface. The retouch ca…
Created on: Tuesday 9th July 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-46C7A2

Record ID: WMID-46C7A2
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete flint hollow scraper, of probable Late Neolithic to Early Bronze Age dating (3300 BC to 1000 BC). The scraper is irregular in shape, with a triangular cross section. It consists of a wider end, which then narrows to a thinner square end. A deliberate circular notch has been taken out of one side, with abrupt, short, acute retouch around it and along the edge below it. A small amount of cortex is present at the wide end. It measures 40.7 mm in length, a maximum width of 15.3 mm and 6.1 mm thick. It weighs 3.2 g. The flint is a mid to dark grey colour, with little surfac…
Created on: Tuesday 9th July 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-45EDB7

Record ID: WMID-45EDB7
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cut halfpenny of Alexander II of Scotland (AD 1214 to AD 1249), minted under the name of his father, William the Lion between c. AD 1230 and c. AD 1235. Minted probably at Roxburgh by uncertain moneyer. C.f. Spink, 2015, Coins of Scotland, Ireland and the Islands, p15, no 5034. Diameter: 17.7 mm Width: 9.3 mm Thickness: 0.7 mm Weight: 0.5 g
Created on: Tuesday 9th July 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-45934A

Record ID: WMID-45934A
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver sixpence of Elizabeth I (AD 1558 to AD 1603), dating to the period AD 1575. Minted as part of the second issue of coinage between 1561 and 1582. Mint mark: Eglantine. Minted at the Tower of London. C.f. North vol 2, p134, no 1997. Diameter: 25.6 mm Thickness: 0.6 mm Weight: 2.4 g
Created on: Tuesday 9th July 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-457784

Record ID: WMID-457784
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete but heavily worn, probable groat of Elizabeth I (AD 1558 to AD 1603), probably dating to the period AD 1558 to AD 1561. Probably minted at the Tower of London. Mint mark unclear. Probably c.f. North vol 2, p133, no 1986. Diameter: 22.1 mm Thickness: 0.3 mm Weight: 0.6 g
Created on: Tuesday 9th July 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-45309E

Record ID: WMID-45309E
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver groat of Mary I (AD 1553 to AD 1554), dating to the period AD 1553 to AD 1554. Minted at the Tower of London. Mint mark unclear. Coin slightly bent in a vague S shape. c.f. North vol 2, p 126, no 1960. Diameter: 22.9 mm Thickness: 0.7 mm Weight: 1.0 g
Created on: Tuesday 9th July 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-451457

Record ID: WMID-451457
Object type: MOUNT
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete gilded copper alloy bar mount or binding strip, of Medieval dating (AD 1200 to AD 1500). Between 25 to 50% of the bar mount is present, but both ends are incomplete. The bar mount is sub rectangular in shape. The reverse of the mount is slightly concave with a depression down the length of the mount. The front has been decorated with three raised squares. Each square has decorated with cross hatching. Between each square is a rectangular section with bevelled edges. Traces of gilding survive within the recesses and lower areas. One end of the mount terminates in a broke…
Created on: Tuesday 9th July 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-354816

Record ID: WMID-354816
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy, Wirral variant type bow brooch, of Roman dating (AD 75 to AD 175). Approximately 75% of the brooch is present. The pin and head loop are missing, presumed lost in antiquity. The bow is angular in shape, with a sub rectangular cross section. The top of the bow is decorated with a flat panel, not stepped, with the base of a head loop. Beneath is is a panel of three vertical bicolour enameled cells. The colours are arranged in a chequerboard type pattern. Only orange enamel is present. The other colour is missing. The enamelled panel terminates with a rounde…
Created on: Monday 8th July 2019
Last updated: Monday 8th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-349A3E

Record ID: WMID-349A3E
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy (bronze) flat axe of Early Bronze Age dating (c. 2350 BC to c. 2050 BC). The flat axe is broadly sub rectangular in shape with a splayed crescent shaped blade. In profile it is broadly lentoid, with slight tapering edges. The butt is relatively thin having a narrow rounded profile; the width at the butt is 17.1 mm (thickness: 2.0 mm). The sides of the axe gently expand in width from the butt to the blade; in shape they are gently curved. The axe is thickest at the mid point (8.6 mm), with no traces of a proto stop ridge present. Potential decoration is …
Created on: Monday 8th July 2019
Last updated: Monday 8th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-344407

Record ID: WMID-344407
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver penny of David II of Scotland (AD 1329 to AD 1371, dating to the period AD 1357 to AD 1367, issued as part of the second coinage. Minted in Edinburgh. c.f. Spink, 2015, Coins of Scotland, Ireland and the Islands, p 27, no 5118. Diameter: 17.7 mm Thickness: 0.8 mm Weight: 0.8 g
Created on: Monday 8th July 2019
Last updated: Monday 8th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-340265

Record ID: WMID-340265
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy bi convex decorated spindle whorl, of probable Medieval dating (AD 1100 to AD 1450). The spindle whorl is sub circular in shape, and lentoid in section. The upper face has been decorated with a series of raised diagonal lines creating V shapes, with a raised circular pellet inside. The lower face is undecorated. The central hole is circular in shape and has been cast / set roughly centrally. It has a internal diameter of 8.7mm. The whorl measures 28.1 mm in diameter, and 13.6 mm thick. It weighs 50.0 g (1.76 oz). The whorl is of a light to mid grey colo…
Created on: Monday 8th July 2019
Last updated: Monday 8th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-33E356

Record ID: WMID-33E356
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast lead or lead alloy bi-convex decorated spindle whorl, of Medieval dating (1100 - 1450 AD). The spindle whorl is sub circular in plan, and lentoid in cross section. The upper face has been decorated with eight raised pellets, arranged in an approximate circular pattern. The lower face exhibits several raised diagonal lines, creating a star like design. A small raised rim is present around the edge of the spindle whorl. The central hole is circular in shape and has been cast approximately centrally. The internal diameter of the hole measures 10.3 mm wide. The whorl h…
Created on: Monday 8th July 2019
Last updated: Monday 8th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-32EF74

Record ID: WMID-32EF74
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy biconvex spindle whorl, of probable Medieval dating (AD 1100 to AD 1500). The spindle whorl is sub-circular in plan, with a central, circular perforation extending vertically through the object (internal diameter 9.5 mm). The sides of the spindle whorl are slightly convex and have a repeating pattern of vertical grooves and ridges. There are four lozenge-shaped mouldings attached to the corners of the object; there is a pronounced seam around the girth of the object and is suggestive that it was manufactured by casting. The seam indicating a line between …
Created on: Monday 8th July 2019
Last updated: Monday 8th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-32D45C

Record ID: WMID-32D45C
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy rotary key of probable Medieval dating (AD 1150 to AD 1400). The key is irregular in plan and cross section. The key can be described in several sections: The bow or handle, shank and bit. The bow is sub lozenge in shape, with a circular collar projection located at the central point on the outside edge. The collar projection has a central upright. The shank is attached to the bow at the mid point of the right hand side with a wide collar either side of a swollen section. The shank consists of an hollow rod, rectangular in plan and circular in section. T…
Created on: Monday 8th July 2019
Last updated: Monday 8th July 2019
Spatial data recorded.


  • Thumbnail image of WMID-B6445D

Record ID: WMID-B6445D
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy trade weight of Post Medieval dating (17th to 18th Centuries AD). The weight is circular in plan. The obverse has a raised ring around the edge as a border. One stamp is visible, A Crowned I (from either James I (1603 to 1625) or James II (1685 to 1688). The base of the weight is undecorated. It has a diameter of 29.0 mm and is 3.7 mm thick. It weighs 10.3 g (0.37 oz). Several similar trade weights have been recorded on the PAS database, including: WMID-0EA67A, WMID-12D771 and SUR-82D25D.
Created on: Tuesday 2nd July 2019
Last updated: Tuesday 2nd July 2019
Spatial data recorded.


  • Thumbnail image of WMID-B5FA51

Record ID: WMID-B5FA51
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy unifaced token, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1700). The token is circular, and flat. The obverse design is a long cross with a pellet in each quarter (Powell type 14). No design is present on the reverse. The token has a diameter of 17.6 mm and is 2.2 mm thick. It weighs 2.5 g. The token is an off white, light grey colour, with an even surface patina.
Created on: Tuesday 2nd July 2019
Last updated: Tuesday 2nd July 2019
Spatial data recorded.


  • Thumbnail image of WMID-B5E4EC

Record ID: WMID-B5E4EC
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy unifaced token, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1700). The token is circular, and flat. The obverse design is a long cross with a pellet in each quarter (Powell type 14). No design is present on the reverse. The token has a diameter of 20.0 mm and is 2.9 mm thick. It weighs 5.4 g. The token is an off white, light grey colour, with an even surface patina.
Created on: Tuesday 2nd July 2019
Last updated: Tuesday 2nd July 2019
Spatial data recorded.


  • Thumbnail image of WMID-A0676A

Record ID: WMID-A0676A
Object type: CANDLESTICK
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy candlestick, of Late Medieval to Early Post Medieval dating (AD 1475 to AD 1525). Only the socket is present, with a small amount of stem. The socket is tubular, circular in section, and has straight sides. The exterior of the socket is decorated with fine horizontal grooves; two in the centre, one below the rim and one around the base. Extending and integral to the base of the socket is further moulding and the incomplete stem. The socket measures 44.6 mm in length, 21.4 mm diameter at the base of the socket, 7.2 mm diameter stem. The mouth of the socket is …
Created on: Monday 1st July 2019
Last updated: Monday 1st July 2019
Spatial data recorded.


  • Thumbnail image of WMID-A033F3

Record ID: WMID-A033F3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy double loop oval buckle frame, of late Medieval dating (c. AD 1400 to AD 1600). The pin and strap plate are not present. The front of the buckle has bevelled edges. The central bar is narrowed. The reverse is flat and undecorated. The buckle frame measures 25.9 mm in length, 20.8 mm wide and 2.7 mm thick. It weighs 2.3 grams. The buckle is a mid dark green, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the original surface detail.
Created on: Monday 1st July 2019
Last updated: Monday 1st July 2019
Spatial data recorded.


  • Thumbnail image of WMID-9F1A1E

Record ID: WMID-9F1A1E
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy sub annular buckle frame, of Post Medieval dating (AD 1650 to AD 1720). Only the buckle frame is present. The chape and pin are missing, presumably lost in antiquity. The buckle frame is sub annular in plan with bevelled edges. Iron corrosion products are present around the central bar, indicating that the pin may have been made from iron. The reverse is undecorated. The buckle frame measures 22.6 mm in length, 18.3 mm wide and 2.3 mm thick. It weighs 1.9 grams. The buckle frame is a dark green colour, with an even surface patina. A similar buckle frame has …
Created on: Monday 1st July 2019
Last updated: Monday 1st July 2019
Spatial data recorded.


  • Thumbnail image of WMID-9E4B63

Record ID: WMID-9E4B63
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy trapezoidal buckle frame, of Post Medieval dating (AD 1660 to AD 1720). The buckle frame is trapezoidal in plan, with a drilled frame, for a separate spindle (now missing). The frame exhibits moulded decoration. Five lobed knops are present over each spindle hole. The pin rest moulding consists of five diagonal grooved lines. The pin, chape and spindle are missing, presumed lost in antiquity. The buckle measures 33.5 mm in length, 22.0 mm wide and 2.8 mm thick. It weighs 4.7 g The buckle frame is a dark green to brown colour, with an even surface patina. …
Created on: Monday 1st July 2019
Last updated: Monday 1st July 2019
Spatial data recorded.


  • Thumbnail image of WMID-9DF4EA

Record ID: WMID-9DF4EA
Object type: MOUNT
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete lead star of Medieval to Post Medieval dating (AD 1400 to AD 1550). The star has six curving rays, with a raised rib in the centre. Raised pellets are positioned along the edge of each ray. No attachment points are present on the reverse. It measures 15.7 mm in length, 16.6 mm wide and 3.2 mm thick. It weighs 2.9 g. Two similar lead stars have been recorded from the same field, FAKL-356B49. Stars of this type were attached, as decoration, to the ceilings of buildings (Egan, 2005, 69-71). The lack of attachment points or holes suggests that they were simply stuck onto w…
Created on: Monday 1st July 2019
Last updated: Monday 1st July 2019
Spatial data recorded.


  • Thumbnail image of WMID-20E7F7

Record ID: WMID-20E7F7
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Eagle mount or figurine, of probable Post Medieval or later dating, AD 1700 to AD 1900. Around 50% of the eagle is present, as one wing is missing. The base is incomplete. The eagle is stood, with wings outstretched and head bent over to the right hand side. Legs are positioned together. The surviving wing is almost triangular in shape, the wing tip is missing. The feet are stood on a circular collared base, with a circular attachment scar underneath. The reverse of the eagle is similar to the front. It measures 68.4 mm tall, 44.8 mm wide and 11.4 mm thick…
Created on: Tuesday 25th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-20A2C7

Record ID: WMID-20A2C7
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver groat of Edward III (AD 1327 to AD 1377), dating to the period AD 1352 to AD 1353, issued as part of the Fourth Coinage, during the Pre-treaty period. Series D. Minted in London. c.f. North vol 2, p50, no 1152. Diameter: 26.7 mm Thickness: 1.0 mm Weight: 4.2 g
Created on: Tuesday 25th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-208328

Record ID: WMID-208328
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver half groat of James I (AD 1603 to AD 1625), dating to the period AD 1604 to 1605. Mint mark Lis. Minted at the Tower of London. Pierced at 1 o'clock on the obverse. Internal diameter of the piercing 1.4mm. c.f. North vol 2, p146, no 2104. Diameter: 17.5 mm Thickness: 0.8 mm Weight: 0.7 g
Created on: Tuesday 25th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-2038A3

Record ID: WMID-2038A3
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver penny of either John I of England (1199 to AD 1216) or Henry III (AD 1216 to AD 1272), dating to the period AD 1217 to 1217. Minted in London by moneyer Abel. Obverse doublestruck. Probably Class Vc. Probably North vol 1, p 222, no 976/1. Diameter: 17.5 mm Thickness: 0.7 mm Weight: 1.1 g
Created on: Tuesday 25th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-1FEA0A

Record ID: WMID-1FEA0A
Object type: VESSEL
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy foot / leg from a copper alloy cooking vessel of Late Medieval to Early Post Medieval dating (AD 1400 - AD 1700). The vessel fragment is triangular, with a rectangular cross section. It consists of a triangular body, with the edges tapering down to a blunt point.. The internal surface is smooth. Traces of a black patina are present on all surfaces. It measures 41.8 mm in length, 38.5 mm wide and 15.3 mm thick. It weighs 83.4 grams. The vessel foot / leg is predominantly a mid green colour, with an uneven surface patina. The remains of copper alloy cookin…
Created on: Tuesday 25th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-1F8532

Record ID: WMID-1F8532
Object type: VESSEL
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
Eight incomplete copper alloy rim and body fragments from a minimum of four copper alloy vessels of Late Medieval to Early Post Medieval dating (AD 1400 -AD 1700). Fragment 1 measures 38.3 mm in length, 47.8 mm wide and 2.0 mm thick. It weighs 25.1 g. 25% of the rim is present, with a rim diameter of 6 cm. The rim type is rounded. Fragment 2 measures 24.2 mm in length, 37.5 mm wide and 8.7 mm thick. It weighs 26.0 g. It is either a body or a base fragment. Fragment 3 measures 24.6 mm in length, 35.0 mm wide and 1.8 mm thick. It weighs 3.8 g. Not enough is present to accurately esti…
Created on: Tuesday 25th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-1F3114

Record ID: WMID-1F3114
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy coin weight, for the Portuguese moidore and 'joe' gold coins, issued between 1760 and 1773 AD. Both faces are marked with S D above 13, 6. Indicating a weight equivalent to that of thirteen (13) shillings and six (pence). It has a diameter of 19.6mmm and is 2.3 mm thick. It weighs 4.0 g (0.14 oz). The coin weight is a mid to dark brown colour, with an even surface patina. It has suffered a minor degree of abrasion, resulting in a loss of some of the original surface detail. Reference: Withers, P. and Withers, B. R., (2011) "Lions Ships and Angels", Galata p…
Created on: Tuesday 25th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-1F08F6

Record ID: WMID-1F08F6
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy trade weight of Post Medieval dating (17th Centuries AD). The weight is circular in plan. The obverse has a raised ring around the edge as a border. Two stamps are present. The sword of St Paul (for London) and a Crowned C (from either Charles I (1625 to 1649) or Charles II (1660 to 1685). The base of the weight is undecorated. It has a diameter of 27.6 mm and is 4.0 mm thick. It weighs 12.4 g (0.44 oz). Several similar trade weights have been recorded on the PAS database, including: WMID-0EA67A, WMID-12D771 and SUR-82D25D. A similar crowned C stamp is visibl…
Created on: Tuesday 25th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-1EE348

Record ID: WMID-1EE348
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete hand made iron rotary key, of probable medieval dating (AD 1150 - AD 1400). The key is irregular in plan and cross section. Being made out of iron, it was probably forged. The key can be described in several sections: The bow or handle, shank and bit. The bow consists of a vertical oval, with an oval cross section. It is 49.5 mm tall and 39.1 mm wide. The shank is attached to the bow at the mid point of the right hand side. The shank consists of an rod, rectangular in plan and circular in cross section. It swells in the middle of the shank, with a collar just before the b…
Created on: Tuesday 25th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-1EBBD7

Record ID: WMID-1EBBD7
Object type: CANDLESTICK
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy candlestick of Late Medieval to Post Medieval dating, c.AD 1475-1600. The candlestick survives as the shaft and socket, the separately made and fitted base is missing, there may also have been a bobeche (a dish, similar to the base that is positioned just below the socket) but it is not possible to tell. Both the shaft and socket are circular in cross section, with the stick having a central raised collar at its mid-point and a flaring collar where it fits the base. socket. A short circular-sectioned projection expands from the base and has a central perfor…
Created on: Tuesday 25th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-1E626D

Record ID: WMID-1E626D
Object type: BELL
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy crotal or rumbler bell of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1600). The bell is sub circular in plan and profile, with an integral sub rectangular suspension loop attached to the top. The edges of the rectangular suspension loop have been bevelled. The base of the bell is semi circular, with a rectangular slot across the base, with circular ends. The 'pea' is still present inside the bell. The bell was cast in one piece, using two opposing moulds. This casting method is indicated by the presence of two complete 'sound holes', which are …
Created on: Tuesday 25th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-0D8F8F

Record ID: WMID-0D8F8F
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy strap fitting / belt hanger, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1600). The mount is comprised of a tapering rectangle with an outward facing chevron shape at one end, edges are damaged and a narrowed rectangular forward looping closed hook at the other. The main body has two circular rivet holes on its central axis, with an internal diameter of 1.3 mm. Traces of linear decoration are present on the front. It measures 34.2 mm in length, 13.2 mm maximum width, and 7.5 mm thick. The metal is 1.2 mm thick. It weighs 1.9 g. The strap …
Created on: Monday 24th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-0D4644

Record ID: WMID-0D4644
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy rotary key of probable Medieval dating (AD 1150 to AD 1400). The key is irregular in plan and cross section. The key can be described in several sections: The bow or handle, shank and bit. The bow is sub circular in shape, with a rectangular cross section. The internal diameter of the bow is 7.0 mm. The shank is attached to the bow at the mid point of the right hand side. The shank is made from a cylindrical rod, hollow at the far end for a depth of 7.1 mm. The bit is sub rectangular. The clefts consist of two short horizontal slots facing each other on eith…
Created on: Monday 24th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-0D1EF0

Record ID: WMID-0D1EF0
Object type: COIN
Broad period: POST MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation Find awaiting validation
A complete silver threepence of Elizabeth I (AD 1558 to AD 1603), dating to the period AD 1580. Minted at the Tower of London. Mintmark Long cross. C.f. North vol 2, p 135, no 1998. Diameter: 18.5 mm Thickness: 0.9 mm Weight: 1.4 g
Created on: Monday 24th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-0CFF23

Record ID: WMID-0CFF23
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cut halfpenny of Henry III (AD 1216 to AD 1272), dating to the period AD 1251 to AD 1272. Minted in Canterbury by moneyer Nicole. Class V. C.f. North vol 1, p 226, no 991/1-999. Diameter: 18.0 mm Width: 9.6 mm Thickness: 0.9 mm Weight: 0.5 g.
Created on: Monday 24th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-0CC962

Record ID: WMID-0CC962
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver penny of Edward I (AD 1272 to AD 1307), dating to the period AD 1300 to AD 1305. Minted in Canterbury. Probably class 10cf. C.f. North vol 2, p 32, no 1040-1043/2. Diameter: 17.5 mm Thickness: 0.7 mm Weight: 1.3 g
Created on: Monday 24th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-0C932D

Record ID: WMID-0C932D
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Published Find published
A copper-alloy Roman radiate of Claudius II (AD 268-270), dating to the period c.AD 268-270 (Reece period 13). [FELICI]TAS AVG reverse type depicting Felicitas standing left holding caduceus and cornucopiae. Mint of Rome. As Normanby no. 628. Diameter: 19.3 mm Thickness: 2.2 mm Weight: 2.4 g
Created on: Monday 24th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-0C676C

Record ID: WMID-0C676C
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Published Find published
A copper-alloy Roman radiate of Tetricus I (AD 271-274), dating to the period c.AD 271-274 (Reece period 13). Illegible reverse type. Diameter: 19.1 mm Thickness: 1.6 mm Weight: 1.8 g
Created on: Monday 24th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-0AC2BD

Record ID: WMID-0AC2BD
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Published Find published
A copper-alloy Roman radiate of Victorinus (AD 269-271), dating to the period c.AD 269-271 (Reece period 13). [SALV]S AVG reverse type depicting Salus standing right feeding snake held in arms. Mint II. As Normanby no. 1432. Diameter: 18.6 mm Thickness: 1.7 mm Weight: 2.0 g
Created on: Monday 24th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-0AA7EB

Record ID: WMID-0AA7EB
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Published Find published
A copper-alloy Roman radiate, probably a contemporary copy of Tetricus I (AD 271-274), dating to the period c.AD 275-285 (Reece period 14). [...]VG reverse type depicting Spes walking left holding flower and skirt. Unclear mint. cf. Normanby no. 1968. Diameter: 17.3 mm Thickness: 1.4 mm Weight: 1.2 g
Created on: Monday 24th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-0A8016

Record ID: WMID-0A8016
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Published Find published
A copper-alloy Roman radiate of Victorinus (AD 269-271), dating to the period c.AD 269-271 (Reece period 14). Unclear reverse type depicting a standing female figure left, possibly Aequitas or Providentia. Mint II. Cf. Normanby nos. 1431, 1445A. Diameter: 21.0 mm Thickness: 1.7 mm Weight: 2.3 g
Created on: Monday 24th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-0A636D

Record ID: WMID-0A636D
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Published Find published
A copepr-alloy Roman radiate of unclear Gallic Emperor, possibly Postumus (AD 260-269), dating to the period c.AD 260-275 (Reece period 13). Illegible reverse type. Diameter: 20.0 mm Thickness: 1.6 mm Weight: 1.6 g
Created on: Monday 24th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-0A4E97

Record ID: WMID-0A4E97
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Published Find published
A copper-alloy Roman radiate of Gallienus (AD 253-268), sole reign, dating to the period c.AD 260-268 (Reece period 13). [...] CONS [...], Unclear quadruped (deer?) walking right. Mint of Rome. Possibly an irregular copy. Diameter: 17.4 mm Thickness: 1.7 mm Weight: 1.5 g
Created on: Monday 24th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-099ADA

Record ID: WMID-099ADA
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Published Find published
A copper-alloy Roman radiate of Claudius II (AD 268-270), dating to the period c.AD 268-270 (Reece period 13). [FI]DES MILITVM reverse type depicting Fides standing left holding sceptre and standard. Mint of Rome. As Normanby no. 940. Diameter: 19.4 mm Thickness: 2.0 mm Weight: 2.2 g
Created on: Monday 24th June 2019
Last updated: Tuesday 25th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-8EC7A5

Record ID: WMID-8EC7A5
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A silver Portugese 20 Reis, probably issued by Joseph I between 1706 and 1777. The Portuguese counterpart to the Spanish quarter real. Obverse: Openwork globe with a rouletted border. Reverse: Voided cross potent. P in each quarter. Rouletted border. No inscriptions. Circular hole located just off centre, punched from reverse to obverse. Internal diameter is 2.0 mm. Diameter:13.9 mm Thickness: 1.3 mm Weight: 0.4 g See CORN-A3BEA1.
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8E91AB

Record ID: WMID-8E91AB
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver shilling of James I (AD 1603 to AD 1625), dating to the period AD 1604 to AD 1619, issued as part of the second coinage. Minted at the Tower of London. Mintmark unclear. Probably fifth bust. c.f. North vol 2, p146, no 2101. Diameter: 30.0 mm Thickness: 0.8 mm Weight: 4.9 g
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8E75F3

Record ID: WMID-8E75F3
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
One unifaced lead token complete with casting jet, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1700). The token is circular with a flat cross section. The obverse depicts a grid design (Powell type 7). A triangular casting jet is present at the top of the token. The reverse is undecorated. The token has a diameter of 19.7 mm and is 2.7 mm thick. The whole artefact measures 36.5 mm in length, 19.7 mm wide and 6.2 mm thick. It weighs 10.4 g. The token is an off white, light grey colour, with an even surface patina.
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8E4634

Record ID: WMID-8E4634
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
Two unifaced lead tokens complete with casting jet, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1700). Both tokens are circular with a flat cross section. Both are of the same obverse design, depicting a plain cross with a pellet in each quarter (Powell type 14). They are joined together by a casting jet. The reverse is undecorated. The left hand token has a diameter of 18.6 mm and is 5.1 mm thick. The right hand token has a diameter of 19.0 mm and is 5.9 mm thick. Together they have a length of 23.2 mm and are 39.0 mm wide. It is 6.3 mm thick. It weighs 19.3 g. Th…
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8E2E36

Record ID: WMID-8E2E36
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy unifaced token, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1700). The token is circular, and flat. The obverse design is four intersecting lines creating eight segments (Powell type 3). No design is present on the reverse. The token has a diameter of 20.2 mm and is 2.0 mm thick. It weighs 3.5 g. The token is an off white, light grey colour, with an even surface patina.
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8E1FBA

Record ID: WMID-8E1FBA
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy unifaced token, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1700). The token is circular, and flat. The obverse design is a five petalled flower (Powell type 1). No design is present on the reverse. The token has a diameter of 21.7 mm and is 3.8 mm thick. It weighs 10.3 g. The token is an off white, light grey colour, with an even surface patina.
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8E12BC

Record ID: WMID-8E12BC
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy unifaced token, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1700). The token is circular, and flat. The obverse design is a plain cross (Powell type 14). No design is present on the reverse. The token has a diameter of 20.3 mm and is 2.8 mm thick. It weighs 6.2 g. The token is an off white, light grey colour, with an even surface patina.
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8DEAC7

Record ID: WMID-8DEAC7
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy unifaced token, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1700). The token is sub rectangular, and flat. The obverse design is unclear, possibly a grid (Powell type 7) or possibly a ship (Powell type 6). No design is present on the reverse. The token has a length of 22.8 mm and 18.8 mm wide. It is 3.4 mm thick. It weighs 7.1 g. The token is an off white, light grey colour, with an even surface patina.
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8DDA95

Record ID: WMID-8DDA95
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy unifaced token, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1700). The token is oval, and flat. The obverse design consists of three vertical lines with a pellet at each end (Probably Powell type 7). No design is present on the reverse. The token has a length of 21.4 mm and 15.3 mm wide. It is 3.3 mm thick. It weighs 5.2 g. The token is an off white, light grey colour, with an even surface patina.
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8D21DC

Record ID: WMID-8D21DC
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete lead or lead alloy unifaced token, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1700). The token is circular, and flat. The obverse design consists of three intersecting lines, with a raised pellet in the centre and pellets in each segment. Six segments are present (Powell type 3). No design is present on the reverse. The token has a diameter of 22.2 mm and is 3.6 mm thick. It weighs 4.8 g. The token is an off white, light grey colour, with an even surface patina.
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8D1468

Record ID: WMID-8D1468
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy unifaced token, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1700). The token is circular, and flat. The obverse design consists of four petalled flower (Powell type 11). No design is present on the reverse. The token has a diameter of 24.0 mm and is 2.8 mm thick. It weighs 6.3 g. The token is an off white, light grey colour, with an even surface patina.
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8CFAF3

Record ID: WMID-8CFAF3
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy unifaced token, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1700). The token is circular, and flat. The obverse design consists of two lines creating a cross design (Powell type 14). No design is present on the reverse. The token has a diameter of 16.9 mm and is 3.5 mm thick. It weighs 5.1 g. The token is an off white, light grey colour, with an even surface patina.
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8CE165

Record ID: WMID-8CE165
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy unifaced token, of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1700). The token is circular, and flat, with the remains of the casting sprue present at the top. The obverse design consists of three intersecting lines creating six segments (Powell type 3). No design is present on the reverse. The token has a diameter of 15.8 mm and is 1.8 mm thick. It weighs 2.4 g. The token is an off white, light grey colour, with an even surface patina.
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8C9E98

Record ID: WMID-8C9E98
Object type: VESSEL
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy foot / leg from a copper alloy cooking vessel of Late Medieval to Early Post Medieval dating (AD 1400 - AD 1700). The vessel fragment is triangular, with an oval cross section. It consists of a triangular body, with the edges tapering down to a blunt point, with an external central rib. The internal surface is smooth. At the top of the leg, a curved section of metal is present, this is the remnants of the vessel base. Traces of a black patina are around the top of the leg. The base of the foot is slightly abraded. It measures 59.0 mm in length, 34.8 mm wide…
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8C73B5

Record ID: WMID-8C73B5
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy trade weight of Post Medieval dating (17th to 18th Centuries AD). The weight is circular in plan. The obverse has a raised ring around the edge as a border. A stamped mark is present but is it is unclear what design it is. The base of the weight is undecorated apart from a concave depression in the centre. It has a diameter of 21.7 mm and is 6.5 mm thick. It weighs 12.8 g (0.45 oz). Several similar trade weights have been recorded on the PAS database, including: WMID-0EA67A, WMID-12D771 and SUR-82D25D.
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8B4836

Record ID: WMID-8B4836
Object type: PENDANT
Broad period: MODERN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete white metal coated hockey mask pendant of modern dating (AD 1900 to AD 2000). The pendant consists of an oval shape with raised triangular nose in the centre, representing a face. The left eye is circular and the right eye is heart shaped. There are three circular impressions on each cheek. Teeth are depicted below the nose as two horizontal rows of six circular impressions. The forehead has the letter F in brackets (F) positioned centrally, with two oval impressions below and then a vertical row of three oval impressions to either side. A circular suspension loop is locat…
Created on: Tuesday 18th June 2019
Last updated: Monday 24th June 2019
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of WMID-8AC502

Record ID: WMID-8AC502
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman brooch of Colchester derivative, Polden Hill type of Roman dating AD 80 to AD 120. Around 25% of the brooch is present, consisting of the bow and part of the spring. The rest of the brooch is missing, presumed lost in antiquity. The bow is angular and hump back, resembling a comma. It is broken around 1/3 of its length. The remains of the spring are still present behind the head. The reverse is undecorated. It measures 22.7 mm in length, 11.9 mm wide and 10.1 mm thick. It weighs 2.5 g. The brooch is a dark brown colour, with an even surface patina. …
Created on: Tuesday 18th June 2019
Last updated: Tuesday 18th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-7863AA

Record ID: WMID-7863AA
Object type: BUCKLE
Broad period: MEDIEVAL
County: Telford and Wrekin
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy buckle, dating to the Medieval period, c. AD 1300 - c. AD 1400. Around 45 % of the buckle remains consisting of the outer edge of the loop. The axis bar, pin and rest of the loop are missing, presumed lost in antiquity. The object is broadly D shaped. The outer edge has been decorated with a central triangle consisting of two raised diagonal rectangular strips joining to a point towards the outside of the buckle, forming a decorated pin rest. To either side of the pin rest, diagonal lines form decorative features. The loop narrows towards the pin bar, but i…
Created on: Monday 17th June 2019
Last updated: Monday 17th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-675FAB

Record ID: WMID-675FAB
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete pierced silver probable pence, probably of Elizabeth I (AD 1558 to AD 1603), probably dating to the period AD 1591/2 to 94. Mintmark: possibly Tun. Minted at the Tower of London. Coin probably has been pierced at 7 o'clock on the reverse. Sub square piercing. Internal dimensions are 1.6 mm by 1.1 mm. C.f. North vol 2, p137, no 2017. Diameter: 16.1 mm Thickness: 0.6 mm Weight: 0.4 g
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-672947

Record ID: WMID-672947
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver probable half groat of Elizabeth I (AD 1558 to AD 1603), probably dating to the period AD 1558 to AD 1561. Probably minted at the Tower of London. Probably North vol 2, p 133, no 1987. Diameter: 23.0 mm Thickness: 0.6 mm Weight: 1.2 g
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-67046F

Record ID: WMID-67046F
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete heavily worn silver possible threepence, possibly of Edward VI (AD 1547 to AD 1553), possibly dating to the period AD 1550 to AD 1553. The coin is heavily worn. This identification has been done by comparing flan sizes, a threepence of Edward VI was the closest match. But a halfgroat of Mary I or threepence of Elizabeth I are other possibilities as well. Possibly North vol 2, p 123, no 1940. Diameter: 22.0 mm Thickness: 0.4 mm Weight: 0.9 g
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-66D2F5

Record ID: WMID-66D2F5
Object type: SPOON
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy spoon, of probable Post Medieval to Modern dating (AD 1700 to AD 1900). Around 25% of the spoon is present, consisting of the handle and a small part of the bowl. Not enough survives of the bowl to indicate the shape of the bowl. The handle is rectangular and flat in shape. An incomplete maker's mark has been stamped on the handle. This possibly reads [ ]I ATHAM. It measures 64.3 mm in length, 13.3 mm wide and 6.1 mm thick. It weighs 11.3 g. The spoon handle is a mid to dark green colour, with an even surface patina.
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-65F2E6

Record ID: WMID-65F2E6
Object type: SEAL
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete lead alloy bag or cloth seal, of probable Post medieval dating (AD 1700 to AD 1800). The seal consists of two circular discs, joined by a rectangular strip. The top disc is circular with traces of writing around the edge. The inscription is incomplete but it is possible to read [ ]GOT[ ]. On the back of the top disc is a triangular rivet, which extends through a central hole on the lower disc. Several punch marks are present around the hole on the lower disc. The seal measures 28.2 mm in length, 20.3 mm wide and 7.1 mm thick. It weighs 10.0 g. The seal is a light to mi…
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-65B513

Record ID: WMID-65B513
Object type: COIN
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver penny of Edward I (AD 1272 to AD 1307), probably dating to the period AD 1300 to AD 1305. Minted in London. Probably Class 10ab. c.f. North vol 2, p 31, no 1038/1-1039/4. Diameter:17.8 mm Thickness: 0.9 mm Weight: 1.2 g
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-658C47

Record ID: WMID-658C47
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver sixpence of Elizabeth I (AD 1559 to AD 1603), dating to the period AD 1568. Minted at the Tower of London. Mintmark: Coronet. C.f. North vol 2, p134, no 1997. Diameter: 24.0 mm Thickness: 0.8 mm Weight: 2.1 g
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-656A87

Record ID: WMID-656A87
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver penny of John (AD 1199 to AD 1216), dating to the period AD 1204/5 to c. AD 1209. Minted in Norwich by moneyer Renavd. Class 5c. cf. North vol 1, p221, no 971. Diameter: 19.6 mm Thickness: 0.7 mm Weight: 1.3 g
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-654BA8

Record ID: WMID-654BA8
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete clipped probable threepence of Elizabeth I (AD 1559 to AD 1603), probably dating to the period AD 1561 to AD 1582. Mintmarks illegible. Probably minted at the Tower of London. Probably c.f. North vol 2, p135, no 1998. Diameter: 17.9 mm Thickness: 0.8 mm Weight: 0.8 g
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-6523B2

Record ID: WMID-6523B2
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver half groat of Charles I (AD 1625 to AD 1649), dating to the period AD 1640 to AD 1641. Mintmark: Star. Tower of London Mint. c.f. North vol 2, p 162, no 2258. Diameter: 16.6 mm Thickness: 0.8 mm Weight: 0.8 g
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-64EAB6

Record ID: WMID-64EAB6
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silvered lead alloy, probable button, of uncertain dating but probably Post Medieval (AD 1600 to AD 1800). Approximately 25-50% of the button survives. It is sub oval in shape. The front depicts a long cross with rouletted edges. Traces of silvering survive in the recess. The back bears no design or feature. It measures 21.4 mm in length, 15.6 mm wide and 3.3 mm thick. It weighs 3.4 g. No direct parallel to this fragment was found at the time of recording. The style of the cross is more suggestive that it could be a button but this identification is not definite.
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-648C23

Record ID: WMID-648C23
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver half groat of Elizabeth I (AD 1558 to Ad 1603), dating to the period AD 1591/2 to AD 1594. Minted at the Tower (London). Mint mark: Tun. cf. North vol 2, p 137, no 2016. Diameter: 16.9 mm Thickness: 0.7 mm Weight: 1.1 g
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-6414A4

Record ID: WMID-6414A4
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete leaded copper alloy unifaced token, of Post medieval dating (AD 1550 to AD 1800). The obverse depicts two initials C S within entwined floral decoration. Pellets present above and below initials. Powell type 2 and 13. No design present on reverse. Diameter: 19.8 mm Thickness: 2.0 mm Weight: 4.7 g A similar style token has been recorded on the PAS database as SUSS-8A26D3.
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-63DAD2

Record ID: WMID-63DAD2
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy nummus of Constantine I (AD 307 to AD 337), dating to the period AD 313 to 314 (Reece Period 15). SOLI INVICTO COMITI reverse type depicting Sol standing left, chlamys across left shoulder, raising right hand, globe in left. Probably Mint of London. Probably RIC VII, p 98, no 10. Diameter: 20.2 mm Thickness: 1.7 mm Weight: 3.1 g
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-63847E

Record ID: WMID-63847E
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published Find published
A copper-alloy Roman radiate of Allectus (AD 293-296), dating to the period c.AD 293-296 (Reece period 14). Illegible reverse type. Unclear mint. Diameter: 18.4 mm Thickness: 1.5 mm Weight: 1.9 g
Created on: Tuesday 4th June 2019
Last updated: Tuesday 4th June 2019
Spatial data recorded.


  • Thumbnail image of WMID-528F34

Record ID: WMID-528F34
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Published Find published
A silver Roman denarius, probably of Trajan (AD 98-117), dating to the period c.AD 103-111 (Reece period 5). CO[S V P P S P Q R OPTIMO PRINC] reverse type depicting Aequitas standing left holding scales and cornucopiae. Mint of Rome. cf. RIC II, p. 252, no. 118. Diameter: 17.6 mm Thickness: 2.0 mm Weight: 1.9 g
Created on: Monday 3rd June 2019
Last updated: Monday 3rd June 2019
Spatial data recorded.


  • Thumbnail image of WMID-518298

Record ID: WMID-518298
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver penny of Henry III (AD 1216 to AD 1272), dating to the period AD 1248 to AD 1250. Minted in London by moneyer Nicole. Class IIIb. C.f. North Vol 1, p226, no 987. Diameter: 17.7 mm Thickness: 0.7 mm Weight: 1.4 g
Created on: Monday 3rd June 2019
Last updated: Monday 3rd June 2019
Spatial data recorded.


  • Thumbnail image of WMID-515863

Record ID: WMID-515863
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy pedestal / pendant seal matrix, of medieval dating (AD 1200 to AD 1400). The body of the matrix consists of a pedestal, created from a tapering column. These terminate in an incomplete trefoil knop, with a circular suspension hole in the middle. The suspension loop is complete, and has an internal diameter of 2.7 mm. One horizontal collar separates the suspension loop from the rest of the handle. The handle is flat and is orientated horizontally. The die or seal face is sub circular, with a diameter of 17.1 mm. The die / seal face is incomplete, with a crudely…
Created on: Monday 3rd June 2019
Last updated: Monday 3rd June 2019
Spatial data recorded.


  • Thumbnail image of WMID-4F74F5

Record ID: WMID-4F74F5
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver halfpenny of Henry VIII (AD 1509 to AD 1547), dating to the period AD 1509 to AD 1526. Minted in London. Portcullis mintmark. C.f. North vol 2, p110, no 1779. Diameter: 11.6 mm Thickness: 0.7 mm Weight: 0.3 g
Created on: Monday 3rd June 2019
Last updated: Monday 3rd June 2019
Spatial data recorded.


  • Thumbnail image of WMID-4F2388

Record ID: WMID-4F2388
Object type: JETTON
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy French jetton, I H S type, issued by Louis IX, dating to the period c. 1447 to c. 1497. C.f. Mitchiner, 1988, p 212, no 608-618. Obverse: Letters IHS in gothic script, with upright stroke of the H crossed. Obverse inscription: AVE MAR[ ] Reverse: Narrow armed single stranded cross fleuretty with flowers in the angles. Reverse inscription: AVE M[ ] DEI MATER Diameter: 25.6 mm Thickness: 1.1 mm Weight: 2.1 g
Created on: Monday 3rd June 2019
Last updated: Monday 3rd June 2019
Spatial data recorded.


  • Thumbnail image of WMID-407E25

Record ID: WMID-407E25
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy coin weight, made in Middelburg, by maker Matthijs Molckman between AD 1585 to AD 1610. The coin weight is square with a design on either side. The obverse possibly depicts a rampart lion within a circular pellet border. The reverse depicts the Arms of Zeeburg, with the letter M to either side. It measures 15.2 mm in length, 15.6 mm wide and 4.3 mm thick. It weighs 5.9 g. The coin weight is a dark green colour with an even surface patina. Several similar coin weights have been recorded on the PAS database, as being produced by the same maker, Matthijs Molck…
Created on: Tuesday 21st May 2019
Last updated: Tuesday 21st May 2019
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 5,310
Search server index: asgard

You are viewing records: 1 - 100.

Search statistics

  • Total quantity: 9,796
  • Mean quantity: 1.845
  • Maximum: 324

Filter your search

1 - 100 of 5,310 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.