Record ID: WAW-675DE4
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Worcestershire
Workflow stage: Awaiting validation
An unidentified wrought iron object of uncertain dating. It is triangular in plan, and circular in cross section. It consists of a hollow cone shape, made from a sheet of iron wrapped together and then fixed. It measures 62.77mm in length, 13.23mm diameter wide at the top, and 3.77mm diameter wide at the bottom. It weighs 20.5 grams. It is a mid to dark brown colour, with an even surface patina. The iron oxide corrosion layer is flaking off in a couple of areas, revealing the dark brown of the underlying metal. These areas should be monitored carefully to prevent fu…
Created on: Friday 19th November 2010
Last updated: Tuesday 8th February 2011
Spatial data recorded.

Record ID: WMID-9A5F36
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A complete circular, probably wrought iron disk, of uncertain dating, but probably Post Medieval to Modern (AD 1700 to AD 1900). The iron disk is circular in plan, and rectangular in section. No decoration is present on either surface. It has a diameter of 21.10 mm and is 4.26 mm thick. It weighs 3.4 g. Both surfaces of the disk are covered with a layer of a corrosion product (iron oxide commonly known as rust). Due to the corrosion product, it is hard to determine what the original function of this artefact was. It was possibly a coin or token but other identifications and func…
Created on: Thursday 13th December 2012
Last updated: Monday 7th January 2013
Spatial data recorded.

Record ID: WMID-841124
Object type: UNIDENTIFIED OBJECT
Broad period: MODERN
County: Milton Keynes
Workflow stage: Awaiting validation
An incomplete wrought iron object, of probable Late Post Medieval to Modern dating (1700 - 1900 AD), of uncertain use and function. The object consists of a rectangular sectioned tang, with an incomplete sheet of iron (now triangular in shape) riveted to the end with two circular rivets. It measures 108.08mm in length. 36.82mm wide and 9.20mm thick. It weighs 33.2 grams.
Created on: Monday 25th June 2012
Last updated: Wednesday 27th June 2012
Spatial data recorded.

Record ID: WMID-09CB46
Object type: SPUR
Broad period: POST MEDIEVAL
County: Solihull
Workflow stage: Awaiting validation
An incomplete iron rowel spur of Post Medieval to Early Modern dating (18th to 19th Centuries). Around 75% of the spur is present. Neither arm is complete. The neck and rowel box are complete.  The arms have a lenticular cross section and are missing both terminals. The neck and rowel box are 29.8 mm in length with cylindrical cross section. It measures 53.1 mm in length, 62.9 mm wide and 11.0 mm thick. It weighs 19.1 g. The spur is a dark brown colour, with an uneven patina. The spur would benefit from being kept in a dry box.  A similar iron spur has bee…
Created on: Wednesday 8th December 2021
Last updated: Monday 13th December 2021
Spatial data recorded.

Record ID: WMID-BBD907
Object type: SPEAR
Broad period: POST MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation
An incomplete wrought iron flat leaf shaped blade, of uncertain dating but probably Post Medieval to Modern (AD 1700 to AD 1900). The artefact has a flat leaf shaped blade, with integral square sectioned tang. A ridge is present on side of the blade, near to the junction with the tang. No central ridge is present on either side of the blade. The top exhibits a rounded, blunt point, not a sharp one. The tang is incomplete with an old, pre-depositional break at the bottom. It measures 113.84 mm in length, 35.14 mm wide and 8.20 mm thick. It weighs 50.2 g. The artefact is a light t…
Created on: Monday 15th April 2013
Last updated: Monday 15th April 2013
Spatial data recorded.

• 

  Image not taken

Record ID: WAW-7FCC37
Object type: SLAG
Broad period: IRON AGE
County: Warwickshire
Workflow stage: Awaiting validation
A fragment of Iron bloomery slag. The fragment measures 34.03mm long by 29.37m wide and 12.87mm thick. It weighs 16.5 grams. The process of smelting iron ore to produce iron has not changed much from the Iron Age to the Medieval period, so this piece of bloomery slag could date from any time between the Iron Age (800 BC) to the Medieval Period (1500 AD).
Created on: Thursday 22nd July 2010
Last updated: Saturday 26th February 2011
Spatial data recorded.

Record ID: WMID-A7CD98
Object type: SLAG
Broad period: IRON AGE
County: Warwickshire
Workflow stage: Awaiting validation
A fragment of Iron bloomery slag. The fragment measures 35.12mm long by 29.00mm wide by 17.21mm thick. It weighs 26.5g. The Iron rich slag exhibits a large number of air bubbles and is relatively heavy in relation to its size. The process of smelting iron ore to produce iron has not changed much from the Iron Age to the Medieval period.
Created on: Tuesday 16th February 2010
Last updated: Wednesday 1st August 2012
Spatial data recorded. This findspot is known as 'Brailes', grid reference and parish protected.

Record ID: WMID-A7FD46
Object type: SLAG
Broad period: IRON AGE
County: Warwickshire
Workflow stage: Awaiting validation
A fragment of Iron bloomery slag. The fragment measures 47.21mm long by 28.40mm wide by 21.84mm thick. It weighs 45.8g. The Iron rich slag exhibits a large number of air bubbles and is relatively heavy for its size. The process of smelting iron ore to produce iron has not changed much from the Iron Age to the Medieval period.
Created on: Tuesday 16th February 2010
Last updated: Wednesday 1st August 2012
Spatial data recorded. This findspot is known as 'Brailes', grid reference and parish protected.

Record ID: WMID-99F6B4
Object type: SLAG
Broad period: IRON AGE
County: Warwickshire
Workflow stage: Awaiting validation
Three irregular fragments of iron bloomery waste (slag) or fuel ash, of Iron Age to Late Medieval dating (800 BC to AD 1600). All three fragments are light for their size, which would suggest that minimal iron metal is present within the matrix. All have a honeycomb structure, formed of solidified air bubbles. The measurements are as follows: 1: Length: 24.53 mm. Width: 23.04 mm. Thickness: 15.25 mm. Weight: 3.8 g. 2: Length: 50.57 mm. Width; 31.64 mm. Thickness: 21.75 mm. Weight: 10.1 g. 3: Length: 31.00 mm. Width: 25.66 mm. Thickness: 19.56 mm. Weight: 11.7 g. All together t…
Created on: Thursday 13th December 2012
Last updated: Friday 22nd March 2013
Spatial data recorded.

Record ID: WMID-6C4958
Object type: KNIFE
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete knife blade and tang, of possible Roman to Post Medieval dating (AD 43 to AD 1700). The blade is triangular in shape and extends to a rectangular-sectioned tang. The upper edge of the blade is almost flush with the upper edge of the tang. The lower edge of the blade, which tapers to a blunt and corroded edge is slightly curved. The tang tapers in width and depth to a blunt point. It measures 113.2 mm in length, 27.1 mm wide and 11.5 mm thick. It weighs 40.3 g. The knife blade is a mid to dark orangey brown colour and is covered with iron corrosion products. The knife b…
Created on: Thursday 6th July 2023
Last updated: Wednesday 3rd April 2024
Spatial data recorded.

Record ID: WAW-F9B4A7
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A hand made iron rotary key of probable medieval date (1150 - 1400 AD). The key is irregular in plan and cross section. Being made out of iron, it was probably forged. The key can be described in several sections: The bow or handle, shank and bit. The bow consists of a vertical oval, with a circular cross section. It is 46.22mm tall and 34.04mm wide. The shank is attached to the bow at the mid point of the right hand side. Opposite that on the left hand side, there is a slight swelling on the inside surface. The shank consists of an rod, rectangular in…
Created on: Tuesday 14th September 2010
Last updated: Wednesday 22nd September 2010
Spatial data recorded.

Record ID: WAW-083E03
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A hand made iron rotary key of probable medieval date (AD 1150 - AD 1400). The key is irregular in plan and cross section. Being made out of iron, it was probably forged. The key can be described in several sections: The bow or handle, shank and bit. The bow consists of a vertical oval, with a circular cross section. It is 51.26 mm tall and 40.97 mm wide. The shank is attached to the bow at the mid point of the right hand side. On the inside edge of the loop, next to where the shank attached, a V-shaped protrusion is present, pointing inwards. The shank consists of an rod, recta…
Created on: Wednesday 15th September 2010
Last updated: Tuesday 12th February 2013
Spatial data recorded.

Record ID: WMID-18F2D3
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A complete hand made iron rotary key, of probable medieval dating (AD 1150 - AD 1400). The key is irregular in plan and cross section. Being made out of iron, it was probably forged. The key can be described in several sections: The bow or handle, shank and bit. The bow consists of a vertical oval, with an oval cross section. It is 52.8 mm tall and 34.7 mm wide. The shank is attached to the bow at the mid point of the right hand side. The shank consists of an rod, rectangular in plan and circular in cross section. It swells in the middle of the shank. It is 120.2 mm long and …
Created on: Wednesday 18th December 2013
Last updated: Wednesday 18th December 2013
Spatial data recorded.

Record ID: WMID-A334C5
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
A complete hand made iron rotary key, of probable medieval dating (AD 1150 - AD 1400). The key is irregular in plan and cross section. Being made out of iron, it was probably forged. The key can be described in several sections: The bow or handle, shank and bit. The bow consists of a vertical oval, with a circular cross section. It is 49.38 mm tall and 33.88 mm wide. The shank is attached to the bow at the mid point of the right hand side. The shank consists of an rod, rectangular in plan and circular in cross section. It is 104.97 mm long and has a diameter of 12.41 mm. The …
Created on: Tuesday 12th February 2013
Last updated: Friday 6th December 2013
Spatial data recorded.

Record ID: WMID-869AD7
Object type: KEY (LOCKING)
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete small iron key from a rotary lock, of Late Roman dating (AD 200 to AD 400). The key consists of a D-sectioned circular bow with a rectangular stem projecting from one side. The bit of the key is also rectangular but is set at an angle of 90° to that of the stem, which is a Roman characteristic. The bit has two horizontal clefts cut into it, one on each side, creating an S shape. No decoration is present on the key. The key measures 48.7 mm in length, 28.1 mm wide and is 28.6 mm thick. It weighs 23.3 g. The bow has an external diameter of 28.1 mm and an internal on…
Created on: Thursday 4th September 2014
Last updated: Monday 12th August 2019
Spatial data recorded.

Record ID: WMID-1EE348
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete hand made iron rotary key, of probable medieval dating (AD 1150 - AD 1400). The key is irregular in plan and cross section. Being made out of iron, it was probably forged. The key can be described in several sections: The bow or handle, shank and bit. The bow consists of a vertical oval, with an oval cross section. It is 49.5 mm tall and 39.1 mm wide. The shank is attached to the bow at the mid point of the right hand side. The shank consists of an rod, rectangular in plan and circular in cross section. It swells in the middle of the shank, with a collar just befor…
Created on: Tuesday 25th June 2019
Last updated: Monday 12th August 2019
Spatial data recorded.

Record ID: WMID-6F7279
Object type: HOB NAIL
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Three incomplete iron hob nails, of probable Roman dating (AD 43 to AD 410). Each hob nail has a domed head, and an incomplete circular sectioned shank. The largest one measures: 12.1 mm in length, 9.2 mm diameter head and 3.4 mm diameter shank. It weighs 0.8 g. The middle one measures 11.0 mm in length, 7.2 mm diameter head and 2.8 mm diameter shank. It weighs 0.5 g. The smallest one measures 7.2 mm in length, 7.3 mm diameter head and 2.3 mm diameter shank. It weighs 0.4 g. Together they all weigh 1.8 g. The hob nails are all a dark brown colour. Several sim…
Created on: Tuesday 21st July 2020
Last updated: Tuesday 21st July 2020
Spatial data recorded.

Record ID: WMID-831F77
Object type: HOB NAIL
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete iron hob nail, of probable Roman dating (AD 43 to AD 410). The hob nail has a domed head, and an incomplete circular sectioned shank. It measures 10.3 mm in length, a head diameter of 10.0 mm and a shank diameter of 4.3 mm. It weighs 0.9 g. The hob nail is a dark brown colour. Several similar hob nails have been recorded on the PAS database, including: WMID-DB0B49, SUR-C41F79 and WAW-2AC6C9.
Created on: Tuesday 29th October 2019
Last updated: Tuesday 29th October 2019
Spatial data recorded.

Record ID: WMID-FE3BFE
Object type: HOB NAIL
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
A complete iron hobnail of probable Roman dating (AD 43 to AD 410). The hobnail has a domed head, and curved shank. The shank tapers to a blunt point. It measures 14.4 mm in length and the head has a diameter of 10.1 mm. It weighs 1.3 g. The hobnail is a mid brown colour, with an even surface patina. The nails compare to other examples on the database including WAW-A15B19 discovered in Warwickshire. Here the record states that "Hob nails were used in Roman footwear (caligulae). Similar hobnails and the pattern which were created with them are illustrated in Manning (1995)…
Created on: Tuesday 25th January 2022
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-1DD124
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lock escutcheon from a piece of furniture, of Post Medieval dating (AD 1700 to AD 1800). The lock escutcheon is irregular in shape, but with a flat cross section. Iron corrosion products do obscure the surface. The lock escutcheon has a pelta shape above with a sunburst stamp on a it. The lock escutcheon is irregular in shape, with a semi-circular top with a squared lys terminal at the base. It measures 46.4 mm in length, 49. 8 mm wide and 10.3 mm thick. It weighs 31.9 g.
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.