Back to simple search | Back to advanced search

    You searched for:

    • IdentifierID: 0014AC3448C01765
    • Sort: objectType
    • Institution: LVPL
    • Page: 12

  • Thumbnail image of LVPL-FB88C6

Record ID: LVPL-FB88C6
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy heraldic harness pendant of Medieval dating (14th Century AD). The pendant is of the 'heater' shield shape (a flat top, with sides that curve steeply to a point). The upper edge has an integrally cast suspension loop, which is sub oval in plan and set at right angles (ninety degrees) to the pendant. It is angled forwards, with an circular pierced loop (internal diameter 2.35mm). The pendant is incomplete, missing the original lower right edge. The front of the pendant features moulded heraldic decoration in the form of an Ex (gronny of eight pie…
Created on: Friday 27th May 2011
Last updated: Thursday 2nd June 2011
Spatial data recorded.


  • Thumbnail image of LVPL-0C1E15

Record ID: LVPL-0C1E15
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy harness fitting / suspension mount, of Medieval dating (c.1250 to c. 1450 AD). The harness fitting is sub-rectangular (T-Shaped) in plan and sub rectangular in cross section. The mount consists of a horizontal bar mount, with an integral cast vertical suspension fitting, located centrally. This suspension fitting is split in two parts so the loop of the harness pendant could be suspended between the two. It would have been fixed in place by a small rivet - probably iron in this case as there are traces of iron staining around the base of the suspension …
Created on: Wednesday 14th September 2011
Last updated: Friday 7th July 2017
Spatial data recorded. This findspot is known as 'North Yorkshire', grid reference and parish protected.


  • Thumbnail image of LVPL-A1A070

Record ID: LVPL-A1A070
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy possible heraldic harness hanger, of probable Medieval dating. The possible harness hanger is irregular in both plan and profile. The top of the hanger consists of central bar with a flat lower surface and regularly spaced semi-circular projections. After a right angled bend, the central bar splits into two semi-circular ends, each with the remnants of a iron pin / bar for suspension purposes. It is mid to dark brown in colour, with an even surface patina. It measures 20.21mm in length, 13.70mm wide and 10.41mm thick. It weighs 2.7 grams. It is …
Created on: Thursday 16th June 2011
Last updated: Wednesday 22nd June 2011
Spatial data recorded.


  • Thumbnail image of LVPL-E1C7B4

Record ID: LVPL-E1C7B4
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy heraldic harness mount or hanger, of Medieval dating (14th Century). The mount is irregular in plan and profile. The front of the mount is broadly rectangular in plan, with circular indentations along three sides. The lower side exhibits two rectangular lugs or protrusions, probably the remnants of a suspension hinge. The reverse is plain and undecorated. An integrally cast attachment spike, with a circular section, is located centrally on the rear of the mount. Traces of enamelled decoration are present on the front of the mount, although due to ab…
Created on: Sunday 19th June 2011
Last updated: Tuesday 17th January 2012
Spatial data recorded.


  • Thumbnail image of LVPL-51F8D7

Record ID: LVPL-51F8D7
Object type: HARNESS HOOK
Broad period: MEDIEVAL
County: Hertfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy, swivelling harness hook or fitting, of Medieval dating (13th to 15th Centuries AD). The hook consists of a domed (conical) terminal knop with a rounded top and a flattened base. Beneath the base of the knop is an integral hook, with a D shaped section throughout its length. It is flat on the inner face. The tip is missing. The hook is mid to dark green in colour, with an even surface patina. It measures 56.50mm in length, 12.20mm wide (maximum - diameter of knop), 5.28mm wide (integral hook), 3.30mm thick (hook) and 11.47mm deep. It weighs 11.9…
Created on: Thursday 19th May 2011
Last updated: Tuesday 14th June 2011
Spatial data recorded.


  • Thumbnail image of LVPL-530914

Record ID: LVPL-530914
Object type: HARNESS HOOK
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy, swivelling harness hook or fitting, of Medieval dating (13th to 15th Centuries AD). The hook consists of a domed (conical) terminal knop with a rounded top and a flattened base. Beneath the base of the knop is an integral hook, with a square shaped section throughout its length. It is flat on the inner face. The tip terminated in a blunt point. The hook is mid to dark green in colour, with an even surface patina. It measures 28.31mm in length, 7.48mm wide (maximum - diameter of knop), 3.55mm wide (integral hook), 4.08mm thick (hook) and 18.15mm dee…
Created on: Thursday 19th May 2011
Last updated: Wednesday 22nd June 2011
Spatial data recorded.


  • Thumbnail image of LVPL-94D1A6

Record ID: LVPL-94D1A6
Object type: HARNESS FITTING
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy heraldic harness mount, of Medieval dating (14th Century AD). The harness mount is circular in plan and rectangular in cross section. It consists of a front circular disc, with the front enameled and would originally have had an integrally cast attachment shank, now missing. The enamel decoration on the front consists of a wavy or scalloped border and a red enamelled background. Located centrally on the background is a lion rearing, standing on its rear legs, with a blue diagonal stripe placed across it. This design can be described, using heraldic te…
Created on: Tuesday 10th May 2011
Last updated: Wednesday 25th September 2013
Spatial data recorded.


  • Thumbnail image of LVPL-2F6BC0

Record ID: LVPL-2F6BC0
Object type: HARNESS FITTING
Broad period: IRON AGE
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy plain harness fitting / terret ring of Late Iron Age to Early Roman dating (100 BC to 100 AD). The terret ring is sub oval (D shaped) in plan with an irregular sub-oval (D shaped) cross section. The attachment bar is oval in cross section and flanked by two circular mouldings. Each of these moulding has a central circumferential groove separating the mouldings into two parts. There is no evidence for other cast decorative motifs or enameled or applied decoration. The terret ring measures 36.71mm in length; 41.19mm wide and 11.59mm thick. The intern…
Created on: Wednesday 28th September 2011
Last updated: Thursday 8th March 2012
Spatial data recorded.


  • Thumbnail image of LVPL-DC2465

Record ID: LVPL-DC2465
Object type: HARNESS FITTING
Broad period: ROMAN
County: Cheshire West and Chester
Workflow stage: Published Find published
An incomplete worn cast copper alloy strap-mounted and skirted terret, dated to the early Roman period (43-200 AD). Length: 51.71mm Width: 48.76mm Thickness: 19.60mm Weight: 45.3 grams
Created on: Friday 1st July 2011
Last updated: Wednesday 1st October 2014
Spatial data recorded.


  • Thumbnail image of LVPL-89D1D3

Record ID: LVPL-89D1D3
Object type: HAMMER
Broad period: BRONZE AGE
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy socketed Hammer of Bronze Age dating. The socketed hammer is rectangular in plan and cross section, and cuboid in shape. Each face exhibits a panel of ridged decoration at the top, and U shaped recess at the base. Casting ridges are present down each side, and have been smoothed off. The tip has been bevelled. At the base of the socket, some white residue or possibly clay soil remnants are present. The socketed hammer is in good condition, with an even surface patina. It is a dark green colour. There are a couple of areas of more recent plough damage. The h…
Created on: Friday 3rd June 2011
Last updated: Thursday 12th July 2018
No spatial data available.


  • Thumbnail image of LVPL-308C12

Record ID: LVPL-308C12
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete decorated sheet copper alloy furniture fitting or possible book mount, of Post Medieval dating (16th to 17th Centuries AD). The furniture fitting is approximately 50% complete, with the majority of the left side of it present. The right side and parts of the lower side are missing, presumably lost in antiquity. It would appear that the furniture fitting had been bent in half, as the remnants of the fold is present down the centre of the fitting. The furniture fitting is sub circular in plan, with two convex circular knops present; one at 12 o'clock and one at 9 o'c…
Created on: Wednesday 30th March 2011
Last updated: Wednesday 30th March 2011
Spatial data recorded.


  • Thumbnail image of LVPL-720A75

Record ID: LVPL-720A75
Object type: FOB
Broad period: IRON AGE
County: Oxfordshire
Workflow stage: Published Find published
Rally ID: 400 An incomplete cast copper alloy triskele decorated fob / dangler of Late Iron Age to Early Roman dating (200 BC to 200 AD). The fob is sub oval in plan, and oval in cross section. It consists of a cast openwork mount with recessed decoration. 5 holes are present, four large and one small. 2 partial small holes are present as well, so originally there would have been seven holes. A large hole is located centrally, with the three remaining large holes located regularly (approximately one at each third) around the central. On the front of the fob, it is decorated with…
Created on: Thursday 14th April 2011
Last updated: Saturday 15th April 2017
Spatial data recorded.


  • Thumbnail image of LVPL-DA4598

Record ID: LVPL-DA4598
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy (bronze) flat axe of Early Bronze Age dating (c. 2200 BC to c. 1900 BC). The flat axe is broadly sub rectangular in plan with a splayed crescent shaped blade. In profile it is broadly lentoid, with slight tapering edges. In cross section the axe is D shaped with one edge displaying a distinctive curved (domed edge) whilst the opposite is relatively flat. It is likely that this is caused by the axe being cast in an open stone mould. The butt is relatively thin having a narrow rounded profile; the width at the butt is 13.96mm (thickness: 1.55mm). The side…
Created on: Wednesday 13th July 2011
Last updated: Thursday 25th September 2014
Spatial data recorded. This findspot is known as 'Hollinsclough', grid reference and parish protected.


  • Thumbnail image of LVPL-043D24

Record ID: LVPL-043D24
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy finger ring, probably of Early Post Medieval dating (1500-1700). The hoop is D shaped in cross section, being rounded to the external (outside edge). The shoulders expand slightly into the rectangular flat bezel. The bezel measures 8.55mm in length, 5.60mm wide. Both the bezel and the hoop appear to be undecorated. The finger ring is a dark red / brown colour, with patches of a dark green surface patina present. This patina is likely to be the original surface, the majority of which has been removed due to abrasion occuring as a result of movement with…
Created on: Thursday 21st April 2011
Last updated: Friday 27th May 2011
Spatial data recorded. This findspot is known as 'Vale Royal', grid reference and parish protected.


  • Thumbnail image of LVPL-0473A5

Record ID: LVPL-0473A5
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy finger ring, probably of Early Post Medieval dating (1500-1700). The hoop is rectangular in cross section, being rounded to the external (outside edge). The shoulders expand slightly into a sub hexagonal bezel. The bezel measures 11.43mm in length, 11.68mm wide. Both the bezel and the hoop appear to be undecorated. The ring has broken across the hoop and has been flattened out slightly. The finger ring is a dark green / brownish red colour, with patches of a dark green surface patina present. This patina is likely to be the original surface, the maj…
Created on: Thursday 21st April 2011
Last updated: Thursday 2nd June 2011
Spatial data recorded. This findspot is known as 'Vale Royal', grid reference and parish protected.


  • Thumbnail image of LVPL-7E0334

Record ID: LVPL-7E0334
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete but misshapen silver finger ring, with rectangular bezel engraved with initials 'H J S'. The hoop is plain, and the shoulders expand to the width of the bezel. Two rectangular boxes have been engraved on each shoulder. The finger ring has an external diameter of 20.14mm, internal of 18.47mm. The hoop is 2.81mm wide, and 0.81mm thick. The bezel is 6.27mm wide and 8.6mm long. It weighs 1.3 grams. Comment from Judy Rudoe (Curator, British Museum): The lettering style is Post Medieval, 18th Century in style. The form of the ring is fairly undiagnostic on dating, as it is lo…
Created on: Wednesday 27th April 2011
Last updated: Tuesday 14th June 2011
Spatial data recorded. This findspot is known as 'Easingwold', grid reference and parish protected.


  • Thumbnail image of LVPL-7E42E3

Record ID: LVPL-7E42E3
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete but misshapen gold finger ring, with domed oval red glass / paste inset intaglio. The intaglio was possibly engraved but due to damage caused by movement in the plough soil, any engraving is hard to determine. The finger ring has been decorated by a series of double circles, with annulets in the centre, joined together by a raised bar. The finger ring has an external diameter of 22.95mm, and an internal diameter of 17.53mm. The back of the hoop is 2.64mm wide and 0.83mm thick. The bezel is 13.93mm wide and 18.57mm long. The finger ring weighs 12.0 grams. A casting or …
Created on: Wednesday 27th April 2011
Last updated: Friday 27th May 2011
Spatial data recorded. This findspot is known as 'York', grid reference and parish protected.


  • Thumbnail image of LVPL-27ACA4

Record ID: LVPL-27ACA4
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Wirral
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy finger ring, of probable Early Post Medieval dating (16th to 17th Centuries AD). The finger ring is of the signet ring style, with a shield shaped bezel. The shoulders are plain and expand slightly out from the width of the hoop. The hoop has a flanged cross section (a prominent ridge running around the centre of the hoop). The device on the shield shaped bezel is hard to determine, it may be more pseudoheraldic in nature than actually heraldic, as it does not appear to conform to standard heraldic traits. The device consists of a central open cross or…
Created on: Thursday 5th May 2011
Last updated: Monday 6th June 2011
Spatial data recorded.


  • Thumbnail image of LVPL-2232A6

Record ID: LVPL-2232A6
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Cheshire East
Workflow stage: Published Find published
A gold mourning finger ring. It has traces of black enamelling on the exterior, in a probable floral pattern. An inscription is present on the internal surface, reading "Death is the waye to life". Next to the inscription on the internal surface is a maker's stamp with the initials TS in square cartouche. Description: Post-Medieval gold mourning ring. D-shaped section with inscription on interior of band , which reads: Death is the waye to life. Maker's mark TS within rectangular cartouche. The fine floral scroll on the exterior, retaining much of the black enamel, is consist…
Created on: Thursday 17th March 2011
Last updated: Tuesday 21st July 2015
Spatial data recorded. This findspot is known as 'Middlewich', grid reference and parish protected.


  • Thumbnail image of LVPL-8C1415

Record ID: LVPL-8C1415
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy signet finger ring, of Early Post Medieval dating (15th to 16th Centuries AD). The finger ring consists of an oval bezel, with part of the hoop. The hoop has a circular section and is incomplete. It extends 20.27mm below the bezel at the top part of the design and 17.53mm at the base of the design. The internal diameter of the ring is 20.21mm. The bezel is oval, with smooth tapered shoulders. It measures 20.88mm long by 15.75mm wide. The bezel is 3.91mm thick. The bezel consists of a recessed heraldic seal matrix type device. Two initials are present …
Created on: Friday 3rd June 2011
Last updated: Thursday 11th July 2013
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 447
Search server index: valhalla

You are viewing records: 221 - 240.

Search statistics

  • Total quantity: 529
  • Mean quantity: 1.183
  • Maximum: 29

Filter your search

221 - 240 of 447 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.