Record ID: WMID-AF5D54
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete enamelled heraldic horse harness pendant of Medieval dating (12th to 14th Centuries AD). The harness pendant is of the 'heater' shield shape, with a flat top and two inward curving sides to a point beneath. A suspension loop is set at right angles at the centre point along the flat top. The suspension loop has an internal diameter of 1.8 mm. The front of the harness pendant has been decorated with enamel. There are six vertical lines, alternating three silver and three blue.The reverse is undecorated. It measures 48.9 mm in length, 30.5 mm wide and 8.9 mm thick. It…
Created on: Friday 8th March 2024
Last updated: Friday 15th March 2024
Spatial data recorded.

Record ID: WMID-AEDC7B
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete silver republican denarius, issued by moneyer P F Clodius, M F Turrinus, dating to c. 42 BC. Reece Period 1. Mint of Rome. Reverse type depicting a Crescent moon with five stars around. As Crawford 494/21, Syndenham 1115. Diameter: 18.7 mm Thickness: 1.9 mm Weight: 3.1 g
Created on: Friday 8th March 2024
Last updated: Friday 8th March 2024
Spatial data recorded.

Record ID: WMID-9CE2B3
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete clipped silver half groat of James I (AD 1603 to AD 1625), dating to the period AD 1604 to AD 1619. Mintmark uncertain. Minted at the Tower of London. C.f. North vol 2, p146, no 2104-2105 Diameter: 12.6 mm Thickness: 0.6 mm Weight: 0.3 g
Created on: Thursday 7th March 2024
Last updated: Thursday 7th March 2024
Spatial data recorded.

Record ID: WMID-9A1091
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete heraldic horse harness pendant of Medieval dating (AD 1270 to AD 1400). Around 50% of the heraldic horse harness pendant is present.  The pendant is lozenge shaped, with the remains of a suspension loop extending from the upper corner. The obverse depicts a quartered design. Quarters 1 & 3 are vertical lines of red enamel. Quarters 2 and 4 are unclear. A large loss of enamel has hindered the identification of the heraldry. The reverse is undecorated. It measures 31.0 mm in length, 21.4 mm wide and 2.8 mm thick. It weighs 3.7 …
Created on: Thursday 7th March 2024
Last updated: Thursday 7th March 2024
Spatial data recorded.

Record ID: WMID-99B58B
Object type: SCABBARD
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy sword scabbard chape of Late Medieval to Early Post Medieval dating (Late 15th to 16th Century AD). The chape is incomplete, with only the front plate surviving. This plate is also slightly damaged. The chape is sub-oval in plan with a rounded front and a dished reverse for the blade. The chape terminates in a knop and is crenellated at the top, at the attachment end. It has an openwork trefoil in the centre. A series of moulded ribs extend from the openwork trefoil to the edges of the chape, flaring gradually.  It measures 34.2 mm in length, 22.7 mm w…
Created on: Thursday 7th March 2024
Last updated: Thursday 7th March 2024
Spatial data recorded.

Record ID: WMID-1DD124
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lock escutcheon from a piece of furniture, of Post Medieval dating (AD 1700 to AD 1800). The lock escutcheon is irregular in shape, but with a flat cross section. Iron corrosion products do obscure the surface. The lock escutcheon has a pelta shape above with a sunburst stamp on a it. The lock escutcheon is irregular in shape, with a semi-circular top with a squared lys terminal at the base. It measures 46.4 mm in length, 49. 8 mm wide and 10.3 mm thick. It weighs 31.9 g.
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WMID-1D7864
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete silver groat of Edward III (AD 1327 to AD 1377), dating to the period AD 1352 to AD 1353, issued as part of the Fourth Coinage, Pre-treaty period (AD 1351 to AD 1361), Series D. Minted at the Tower of London. C.f. North, vol 2, p50, no 1152. Diameter: 27.0 mm Thickness: 1.2 mm Weight: 4.2 g
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WMID-1C1991
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy dupondius of uncertain Emperor, but of first to third century AD. Reverse type uncertain. Mint probably Rome.  Diameter: 26.7 mm Thickness: 4.0 mm Weight: 9.7 g
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WMID-1BAFA7
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete lead alloy unifaced token of Medieval to Post Medieval dating (AD 1400 to AD 1800). The token is circular in shape. The obverse has an unclear design. The reverse is undecorated. It has a diameter of 23.3 mm and is 3.5 mm thick. It weighs 7.7 g.
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WMID-1B9306
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete lead alloy unifaced token of Medieval to Post Medieval dating (AD 1400 to AD 1800). The token is circular in shape. The obverse has several radiating lines from a central point (Powell type 3). The reverse is undecorated. It has a diameter of 18.9 mm and is 4.8 mm thick. It weighs 7.0 g.
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WMID-1B702C
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete lead alloy unifaced token of Medieval to Post Medieval dating (AD 1400 to AD 1800). The token is sub circular in shape. The obverse is unclear but probably has a central strand which splits and curves away. Two curves are on either side (Powell type 31). The reverse is undecorated. It has a diameter of 19.9 mm and is 3.1 mm thick. It weighs 6.5 g.
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WMID-1B1ED7
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete lead alloy unifaced token of Medieval to Post Medieval dating (AD 1400 to AD 1800). The token is sub circular in shape. The obverse has a single stranded cross (Powell type 14). The reverse is undecorated. It has a diameter of 18.4 mm and is 3.7 mm thick. It weighs 3.9 g.
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WMID-1B09B8
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete lead alloy unifaced token of Medieval to Post Medieval dating (AD 1400 to AD 1800). The token is sub circular in shape. The obverse of the token has an uncertain design. It has a double stranded cross design (Powell type 14). The reverse is undecorated. It has a diameter of 20.6 mm and is 1.9 mm thick. It weighs 3.8 g.
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WMID-1AD4C4
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lead or lead alloy convex spindle whorl, of Roman to Post Medieval dating (AD 43 - AD 1650). The spindle whorl is sub circular in shape, and domed in cross section. The central hole is sub circular in shape and has been cast slightly off central. The internal diameter of the hole measures 6.4 mm wide. Both upper and lower faces bear no trace of decoration. The whorl has a diameter of 18.9 mm and is 8.2 mm thick. It weighs 14.2 g (0.50 oz). The whorl is of a light to mid grey colour, with an even surface patina. Abr…
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WMID-1A88D9
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lead or lead alloy flat spindle whorl, of Roman to Post Medieval dating (AD 43 - AD 1650). The spindle whorl is sub circular in shape, and rectangular in cross section. The central hole is sub circular in shape and has been cast slightly off central. The internal diameter of the hole measures 10.1 mm wide. Both upper and lower faces bear no trace of decoration. The whorl has a diameter of 29.7 mm and is 9.9 mm thick. It weighs 44.8 g (1.58 oz). The whorl is of a light to mid grey colour, with an even surface patina. Abrasion, caused b…
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WMID-19F573
Object type: WEIGHT
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
A conical lead alloy weight of probable Roman dating (AD 43 to AD 410). The weight is conical in form. The sides of the weight flare to the flat circular base.The upper edge has a flattened top. The base is flat. An incomplete iron suspension loop was secured through the weight. The weight is undecorated. It has a height of 32.4 mm. The base diameter is 41.30 mm and the top diameter is 24.0 mm. It weighs 314.5 g (11.09 oz). It is equivalent to one Roman Libra. The weight is an off white colour, with an even surface patina.  Weights can be hard to …
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WMID-19A977
Object type: BELL
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy crotal or rumbler bell of probable Post Medieval dating (16th to 17th Centuries AD). The bell is sub circular in plan and profile, with an integrally cast sub rectangular suspension loop attached to the top. The edges of the rectangular suspension loop have been bevelled. The base of the bell is semi circular, with a rectangular slot across the base, with circular ends. The Iron 'pea' is still present inside the bell. Minimal decoration appears visible on the lower hemispheres of the bell. The bell was cast in one piece, using two opposing moulds.…
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.

Record ID: WMID-F45534
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy rotary key of probable Medieval dating (AD 1150 to AD 1400). The key is irregular in plan and cross section. The key can be described in several sections: The bow or handle, shank and bit. The bow is incomplete, and probably was originally sub circular in shape. It has a rectangular cross section. The shank is attached to the bow at the mid point of the right hand side. The shank consists of an hollow rod, rectangular in plan and circular in section. Small diagonal grooves, in a zig zag pattern are present on the top and sides of t…
Created on: Wednesday 28th February 2024
Last updated: Wednesday 28th February 2024
Spatial data recorded.

Record ID: WMID-F3CBE7
Object type: PIPE TAMPER
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy pipe tamper (stopper) of Post Medieval dating (AD 1700 to AD 1900). Over 75% of the pip tamper is present, with the stopper part missing. It is sub-rectangular in plan, with a moulded scene at the top forming a handle, and the remains of a stopper projecting from the base, with a patinated break. Both sides of the handle are moulded. One face shows an erotic or bawdy scene of a man and woman copulating under the canopy of a tree. Both figures are standing and the woman has her left leg raised to the horizontal, supported by the man's…
Created on: Wednesday 28th February 2024
Last updated: Wednesday 28th February 2024
Spatial data recorded.

Record ID: WMID-865188
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete silver shilling of James I (AD 1603 to AD 1625), dating to the period AD 1603 to AD 1604. Minted at the Tower of London. Mintmark: Thistle. C.f. North vol 2, p144, no 2073. Diameter: 30.7 mm Thickness: 1.6 mm Weight: 5.6 g
Created on: Friday 23rd February 2024
Last updated: Friday 23rd February 2024
Spatial data recorded. This findspot is known as 'South Staffordshire', grid reference and parish protected.

Record ID: WMID-75B394
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy As of Vespasian (Ad 69 to AD 79), dating to the period AD 77 to AD 78. IVDAEA CAPTA S C reverse type depicting Judaea seated right under palm-tree, in attitude of mourning; behind palm-tree, round and oblong shields and vexillum. Minted at Lugdunum (Lyon). C.f. RIC II, Part 1 (Second edition), Vespasian 1268. Diameter: 28.4 mm Thickness: 1.3 mm Weight: 3.5 g
Created on: Thursday 22nd February 2024
Last updated: Thursday 22nd February 2024
Spatial data recorded. This findspot is known as 'South Staffordshire', grid reference and parish protected.

Record ID: WMID-757A66
Object type: COIN WEIGHT
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy uniface coin weight, of Medieval dating (AD 1464 to AD 1500). The weight is sub circular in plan. The obverse face bears a moulded design consisting of a king with sword and square topped shield standing in a ship with rectangular bow . The reverse face is plain and undecorated. Filemarks are visible on the reverse. The coin weight has a diameter of 13.9 mm and is 3.3 mm thick. It weighs 3.1 g (47 grains). The coin weight is a dark green colour, with an even surface patina. Withers & Withers (1995, 18) suggest that the …
Created on: Thursday 22nd February 2024
Last updated: Thursday 22nd February 2024
Spatial data recorded. This findspot is known as 'South Staffordshire', grid reference and parish protected.

Record ID: WMID-73BB32
Object type: WEIGHT
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A conical lead alloy weight of probable Medieval to Post Medieval dating (AD 1500 to AD 1900). The weight is conical in form. The sides of the weight flare to the flat circular base.The upper edge has a flattened top. The base is flat. An incomplete iron suspension loop was secured through the weight. The weight is undecorated. It has a height of 44.9 mm. The base diameter is 39.9 mm and the top diameter is 25.2 mm. It weighs 370.0 g (13.05 oz). The weight is an off white colour, with an even surface patina.  Weights can be hard to date due to being a funct…
Created on: Thursday 22nd February 2024
Last updated: Thursday 22nd February 2024
Spatial data recorded. This findspot is known as 'South Staffordshire', grid reference and parish protected.

Record ID: WMID-72B659
Object type: WEIGHT
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
A conical lead alloy weight of probable Roman to Post-Medieval date, circa AD 43 - 1700. The weight is conical in form. The sides of the weight flare to the flat circular base.The upper edge has a flattened top. The base is flat. A central circular perforation or suspension hole is present in the base, with a depth of 10.9 mm, with a diameter of 5.6 mm. The weight is undecorated. It has a height of 35.6 mm. The base diameter is 30.3 mm and the top diameter is 14.9 mm. It weighs 137.2 g (4.84 oz). The weight is an off white colour, with an even surface p…
Created on: Thursday 22nd February 2024
Last updated: Thursday 22nd February 2024
Spatial data recorded. This findspot is known as 'South Staffordshire', grid reference and parish protected.

Record ID: WMID-5FDC6B
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete clipped silver half groat of Charles I (AD 1625 to AD 1649), dating to the period AD 1644 to AD 1645. Minted at the Tower of London. Mintmark: (R). Group D.  C.f. North vol 2, p 162, no 2258. Diameter: 16.5 mm Thickness: 1.0 mm Weight: 0.7 g
Created on: Friday 9th February 2024
Last updated: Friday 9th February 2024
Spatial data recorded.

Record ID: WMID-5FA2E5
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete silver half groat of Henry VIII (AD 1509 to AD 1547), minted in York by Archbishop Thomas Wolsley between AD 1514 and AD 1526. Mintmark: Escallop. The obverse has been double struck. C.f. North vol 2, p 110, no 1771. Diameter: 19.2 mm Thickness: 0.8 mm Weight: 1.1 g
Created on: Friday 9th February 2024
Last updated: Friday 9th February 2024
Spatial data recorded.

Record ID: WMID-907ED7
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete white metal or lead-alloy probable furniture fitting of Post Medieval dating (AD 1600 to AD 1800).  Less than 25% of the artefact is present. It consists of a hollow tube, with a break at the bottom, extending upwards into a terminal of two (originally three) plumed feathers, with a collar or ribbon at the base.  It measures 45.0 mm in length, 16.0 mm wide and 6.8 mm thick. It weighs 11.34 g. The artefact is a mid grey colour, with an even surface patina. A similar object, WMID-85D0FD, was recovered from the same field. Neither objects join but are probably …
Created on: Tuesday 30th January 2024
Last updated: Tuesday 30th January 2024
Spatial data recorded.

Record ID: WMID-3BC0B4
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy double looped buckle, of Post Medieval dating (c. AD 1550 to c. AD 1650). 50% of the buckle frame is present, with only one loop, pin and the central bar surviving. The strap plate are missing, presumed lost in antiquity. The frame is sub oval in plan, and rectangular in cross section. The outer loops are both expanded, with one oblique groove present as pin rest. The remains of sub triangular knops are present at either end of the central strap bar. The back is flat and no decoration present. Traces of a black coating are pres…
Created on: Friday 26th January 2024
Last updated: Friday 26th January 2024
Spatial data recorded.

Record ID: WMID-3B6B48
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete lead or lead alloy bi convex decorated spindle whorl, of probably the Medieval period, dating from c. AD 1100 to AD 1450. The spindle whorl is sub circular in shape, and lentoid in section. The obverse and reverse have different designs. The obverse has lots of closely placed diagonal rays which terminate with a pellet. The reverse has plain diagonal rays, spaced further apart with a pellet between them. The central hole is circular in shape and has been cast / set roughly centrally. It has a internal diameter of 9.0 mm. The whorl measures 28.4 mm&…
Created on: Friday 26th January 2024
Last updated: Friday 26th January 2024
Spatial data recorded.

Record ID: WMID-3B3A3E
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy zoomorphic strap fitting or belt hook, of Post Medieval dating dating (1500 to 1600 AD). It is S shaped with an oval cross section. A zoomorphic or animal head terminal is present at both ends, with a rounded nose, and circular eye. At the centre of the S is a 'waisted' area comprising a central flower design, with leaves pointing away on both sides. Iron corrosion products are present at the centre, and indicate that the pin may have been made from iron. The strap fitting measures 31.4 mm in length, 16.4 mm wide and 7.1 mm thi…
Created on: Friday 26th January 2024
Last updated: Friday 26th January 2024
Spatial data recorded.

Record ID: WMID-001ED3
Object type: PENDANT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete white metal circular religious pendant of probable Post Medieval dating (AD 1950 to AD 2000). The pendant is circular in shape. There is a semi-circular break at the top of the pendant, this is likely to be where the suspension loop was situated, it is now missing. One side depicts a male bishop, standing facing, holding a child in his arms on his right. The child is facing forwards. To either side are hanging incense burners. The other side depicts a crucification scene, with Christ positioned centrally on a long cross with trilobate terminals. Diagonal rays extend…
Created on: Thursday 11th January 2024
Last updated: Monday 11th March 2024
Spatial data recorded.

Record ID: WMID-2F6CA6
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete vesica or pointed oval lead or lead alloy seal matrix, of Medieval dating (AD 1300 to AD 1400). The reverse has a incomplete tab handle. The central device is a multiple branched tree or hatching. A partially legible inscription is present around the edge, reading [ ]EO[ ] It measures 31.1 mm in length, is 21.1 mm wide and 5.0 mm thick. The matrix is 3.2 mm thick. It weighs 10.9 g. The matrix is a mid grey colour, with an even surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted …
Created on: Wednesday 20th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-2F40CD
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy probable furniture fitting of Post Medieval dating (AD 1700 to AD 1800).  The probable furniture fitting consists of a disc with twelve points, though with one larger and more angular than the rest. One side bears a moulded radial pattern, with each ray bordered like a petal. The larger petal forms part of an attachment/suspension fitting, with a longitudinal ridge on the reverse. The reverse of the disc has the remains of a central attachment spike in the centre.  It measures 31.9 mm in length, 22.5 mm wide and it is 4.9 mm thick. The metal is 2.…
Created on: Wednesday 20th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-2EEC05
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy trumpet brooch of Roman date (circa AD 75 to 175). The brooch consists of the head and the upper part of the bow. The foot and catch plate, spring and pin are missing. The brooch is 'C' shape in profile. The bow tapers from an incomplete flared head to a moulded arcanthus waist, with a collar above and below. It then terminates in an old break that is well patinated. The head of the brooch is sub-oval in plan, and tapers into the bow. The remains of the vertical catch plate are present towards the foot (now missing) on t…
Created on: Wednesday 20th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-2EAF62
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete cut half penny of Henry III (AD 1249 to AD 1272), dating to the period 1253-6. Minted by moneyer Willelm at Canterbury Mint. Class 5b2 or class 5c2. Diameter: 18.2 mm Width: 9.3 mm Thickness: 0.9 mm Weight: 0.6 g
Created on: Wednesday 20th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-1C1DA8
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy trapezoidal buckle and spindle, of Post Medieval dating (AD 1660 to AD 1720). The buckle frame is trapezoidal in plan, with a drilled frame, for a separate spindle. The frame exhibits moulded decoration. Scrolled knops are present on either side of the spindle holes and a moulded pin rest is present on both of the outer loops. Annulet decoration is present on the outer loops. The pin rest moulding consists of engraved opposing oblique lines, imitating either a scallop shell or a leaf.  The buckle measures 27.3 mm in length, 17.5 mm&nbs…
Created on: Tuesday 19th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-1BF257
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy trade weight of Post Medieval dating (17th to 18th Centuries AD). The weight is circular in plan. The obverse has a raised ring around the edge as a border. Three stamps are present. A Staffordshire Knot, a capital letter V and a capital letter H. The base of the weight is undecorated. Filemarks are present on the base. It has a diameter of 18.8 mm and is 4.4 mm thick. It weighs 5.7 g (0.20 oz). Several similar trade weights have been recorded on the PAS database, including: WMID-0EA67A, WMID-12D771 and SUR-82D25D. A cr…
Created on: Tuesday 19th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-1BDADE
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lead or lead alloy convex spindle whorl, of Roman to Post Medieval dating (AD 43 - AD 1650). The spindle whorl is sub circular in shape, and domed in cross section. The central hole is sub circular in shape and has been cast slightly off central. The internal diameter of the hole measures 8.2 mm wide. Both upper and lower faces bear no trace of decoration. The whorl has a diameter of 33.1 mm and is12.3 mm thick. It weighs 52.9 g (1.87 oz). The whorl is of a light to mid grey colour, with an even surface patina. Abrasion, caused by mov…
Created on: Tuesday 19th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-1BAE0B
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
A complete lead or lead alloy flat spindle whorl, of Roman to Post Medieval dating (AD 43 - AD 1650). The spindle whorl is sub-circular in shape, and rectangular in cross section. Both upper and lower surfaces are flat. There is a hole of internal diameter 9.6 mm which is cast off-centre. The surface appears undecorated but this may be due to abrasion in the soil. The whorl has a diameter of 30.6 mm and is 7.0 mm thick. It weighs 40.6 g (1.43 oz). The whorl is light grey in colour, and has an even surface patina. Abrasion, caused by movem…
Created on: Tuesday 19th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-1B820E
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
A complete lead or lead alloy flat spindle whorl, of Roman to Post Medieval dating (AD 43 - AD 1650). The spindle whorl is sub-circular in shape, and rectangular in cross section. Both upper and lower surfaces are flat. There is a hole of internal diameter 9.3 mm which is cast off-centre. The surface appears undecorated but this may be due to abrasion in the soil. The whorl has a diameter of 28.4 mm and is 10.1 mm thick. It weighs 44.0 g (1.55 oz). The whorl is light grey in colour, and has an even surface patina. Abrasion, caused by movement …
Created on: Tuesday 19th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-1B5957
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lead or lead alloy convex spindle whorl, of Roman to Post Medieval dating (AD 43 - AD 1650). The spindle whorl is sub circular in shape, and domed in cross section. The central hole is sub circular in shape and has been cast slightly off central. The internal diameter of the hole measures 7.6 mm wide. Both upper and lower faces bear no trace of decoration. The whorl has a diameter of 22.7 mm and is 6.0 mm thick. It weighs 12.3 g (0.43 oz). The whorl is of a light to mid grey colour, with an even surface patina. Abr…
Created on: Tuesday 19th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-1B4851
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lead or lead alloy convex spindle whorl, of Roman to Post Medieval dating (AD 43 - AD 1650). The spindle whorl is sub circular in shape, and domed in cross section. The central hole is sub circular in shape and has been cast slightly off central. The internal diameter of the hole measures 7.7 mm wide. Both upper and lower faces bear no trace of decoration. The whorl has a diameter of 20.1 mm and is 9.4 mm thick. It weighs 18.4 g (0.65 oz). The whorl is of a light to mid grey colour, with an even surface patina. Abrasion, caused b…
Created on: Tuesday 19th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-1B2C78
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lead or lead alloy convex spindle whorl, of Roman to Post Medieval dating (AD 43 - AD 1650). The spindle whorl is sub circular in shape, and domed in cross section. The central hole is sub circular in shape and has been cast slightly off central. The internal diameter of the hole measures 8.5 mm wide. Both upper and lower faces bear no trace of decoration. The whorl has a diameter of 22.8 mm and is 5.3 mm thick. It weighs 11.8 g (0.42 oz). The whorl is of a light to mid grey colour, with an even surface patina. Abrasion, cau…
Created on: Tuesday 19th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-1AE131
Object type: WEIGHT
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete lead alloy pyramidal standing weight of possibly Medieval or Post Medieval date (AD 1066 - 1800). It has a circular, flat base and flat sides, tapering to a blunt point at the apex.No hole is present in the narrowed lug, which projects from the top of the weight. This lug bends forward slightly. The surface of the object is quite rough. The base is rough with a slight concavity in the centre.  It measures 44.2 mm in height, a base diameter of 26.3 mm and 23.2 mm wide at the lug. It is 7.4 mm thick at the lug. It weighs 159.7 g (…
Created on: Tuesday 19th December 2023
Last updated: Thursday 22nd February 2024
Spatial data recorded.

Record ID: WMID-1982A7
Object type: WEIGHT
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lead or lead alloy ovoid weight, of probable Medieval (AD 1100 to AD 1500) dating. The weight is ovoid (egg) in shape with a circular cross section and a flat base. Remains of an iron suspension loop are present at the apex (top) of the weight. The weight is 36.0 mm tall, has a maximum diameter of 28.6 mm. It weighs 160.1 g (5.65 oz). The weight is a mid to dark grey colour, with an even surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the original surface detail. Weights can be…
Created on: Tuesday 19th December 2023
Last updated: Wednesday 20th December 2023
Spatial data recorded.

Record ID: WMID-5C6C02
Object type: VESSEL
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
A minimum of three lead or lead alloy, possible vat or tanks, of uncertain dating but possibly Early Medieval (AD 750 to AD 1000). The three vats were originally found together, but are now fragmentary. All three vats have oval bases, and originally upright walls, however they have all been flattened, with the sides pressed inwards. All three vats have similar folded seams at two sides of the vat, where the sides join together. Vat 1 is the larger of the three vats and exhibits different decoration to the other two. Vat 1 has raised twisted rope style in a chevron or a zig z…
Created on: Tuesday 28th November 2023
Last updated: Monday 4th December 2023
Spatial data recorded.

Record ID: WMID-4A092D
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Published
An incomplete cast copper alloy (bronze) flat axe of Early Bronze Age dating (c. 2350 BC to c. 2050 BC). The flat axe is broadly sub rectangular in shape with a splayed crescent shaped blade. In profile it is broadly lentoid, with slight tapering edges. The butt is relatively thin having a narrow rounded profile; the width at the butt is 16.5 mm (thickness: 4.2 mm). The sides of the axe gently expand in width from the butt to the blade; in shape they are relatively curved. The axe is thickest at the mid point (10.4 mm), with traces of a proto stop ridge p…
Created on: Monday 27th November 2023
Last updated: Thursday 4th January 2024
Spatial data recorded.

Record ID: WMID-4835F3
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy coin weight for 21 shillings, of Post Medieval dating (AD 1760 to AD 1773). The coin weight is circular, with the same design on both faces: Italic S above 21, 5 D 9 G below. A beaded border is present around the outside. It has a diameter of 18.7 mm and is 4.3 mm thick. It weighs 7.6 g (116.7 gn). The coin weight is a mid brown colour, with an even surface patina. This would have been part of a set of 11 weights for Guinea, Moidore and Johannes coins; The Guinea series (21s, 10s 6d, 5s 3d) the moidore series (27s,13s 6d, 6s 9d) and the Johannes series (&pou…
Created on: Monday 27th November 2023
Last updated: Monday 11th December 2023
Spatial data recorded.

Record ID: WMID-47D199
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete clipped silver groat of Edward IV (AD 1461 to AD 1470), dating to the period AD 1464/5 to AD 1470. Minted in London. C.f. North vol 2, p1566-7. Diameter: 25.9 mm Thickness: 0.9 mm Weight: 28.7 g
Created on: Monday 27th November 2023
Last updated: Monday 11th December 2023
Spatial data recorded.

Record ID: WMID-478A2A
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete silver denarius of Augustus (31 BC to AD 14), dating to the period 2 BC to AD 4 (Reece Period 1). Minted at Lugdunum (Lyon). C L CAESARES AVGVSTI F COS DESIG PRINC IVVENT reverse type depicting Gaius and Lucius Caesar standing, each, togate, resting hand on shield and spear, simpulum, left, and lituus, right, flanking, right and left respectively. C.f. RIC I (2nd Ed), 210-212 Diameter: 18.5 mm Thickness: 2.1 mm Weight: 3.1 g
Created on: Monday 27th November 2023
Last updated: Monday 11th December 2023
Spatial data recorded.

Record ID: WMID-474EBA
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A copper alloy chafing dish handle of Medieval to Post Medieval date (AD 1400-1600). The handle is roughly trapezoidal in shape, being wider at the bottom with rounded corners and a slightly inward curving lower edge whilst the upper edge short and straight. The bottom right corner has been bent slightly upwards. The handle has a square cross section throughout. There is an incomplete attachment lug. The lug has a more drop-shaped, sub-oval body in profile that is rectangular in cross section. There is a rectangular collar at the narrow end of the body of the lug and wh…
Created on: Monday 27th November 2023
Last updated: Monday 11th December 2023
Spatial data recorded.

Record ID: WMID-46BC5F
Object type: HARNESS FITTING
Broad period: ROMAN
County: Staffordshire
Workflow stage: Published
A complete, cast, copper-alloy, strap-mounted terret of Roman date, around AD 43 - 250, of Lewis type xix. The terret comprises a main ovate ring with an integral rectangular loop projecting from the base. The main ring is bottom-heavy displaying wear one one face. The ring has a tapering ovate section and the loop is sub-rectangular in section. The terret is undecorated. The metal has a mid-green patina and is worn. The terret is 40.5 mm long, 30.9 mm wide, 12.3 mm thick and weighs 35.7 g. Compare YORYM-83701C and see Lewis (2015). Terret rings were used as rein guid…
Created on: Monday 27th November 2023
Last updated: Wednesday 24th January 2024
Spatial data recorded.

Record ID: WMID-74FFE1
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lead or lead alloy unifaced token of Medieval to Post Medieval dating (AD 1400 to AD 1800). The token was originally circular in shape, less than 50% of it now survives. The reverse is plain and undecorated. The obverse has a couple of raised lines but it is hard to determine the original design. Powell type uncertain. Diameter: 19.6 mm Thickness: 2.3 mm Weight: 1.3 g
Created on: Friday 17th November 2023
Last updated: Wednesday 22nd November 2023
Spatial data recorded.

Record ID: WMID-7324D0
Object type: INGOT
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy probable ingot of possible Bronze Age or later dating (2300 BC to 1500 AD). The probable ingot is a pointed oval shape, with a flat lower side and a convex (domed) upper side. No faceting appears to be present around the edges. Multiple air bubbles or casting flaws are present.  It measures 88.0 mm in length, 34.3 mm wide and 9.1 mm thick. It weighs 127.1 g (4.48 oz). The ingot is a dark green colour, with an even surface patina. There are areas of bright green copper corrosion present, these areas should be monitored and the ingot stored in a sealed air…
Created on: Friday 17th November 2023
Last updated: Friday 17th November 2023
Spatial data recorded.

Record ID: WMID-629B96
Object type: PURSE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy purse bar of Late Medieval to Post Medieval dating (AD 1450 to AD 1550). Around 50% of the purse bar is present, with one arm and the central block present. The rest is missing, presumed lost in antiquity. The arm are oval, near circular in cross-section. Beginning at the block, the arm has a stylised animal head with open jaws. Now quite worn and difficult to see, these take the form of a short length of the bar that is thickened and widened, with a V-shaped notch on the top of each, separating and defining a brow and muzzle. The rest of the…
Created on: Thursday 16th November 2023
Last updated: Thursday 16th November 2023
Spatial data recorded.

Record ID: WMID-C22CCA
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy Roman brooch of Colchester derivative, Polden Hill of Roman dating AD 80 to AD120. Around 25% of the brooch is present, consisting of the bow. The wings, spring, pin, foot and catch plate are missing, presumed lost in antiquity. The bow is angular and hump back, resembling a comma. It is broken around 1/3 of its length. The wings are incomplete and consist of small stubs. A cylindrical recess is present behind the wings, this would originally have retained the spring. The bow has been decorated with a vertical row of pellets around centr…
Created on: Thursday 21st September 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-C1EF2C
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy brooch of Colchester derivative Polden Hill (Mackreth Group 4, flat wing ends), Mackreth 2011, 4.a. Plate 46, of Roman date (AD 80 to AD 120). Approximately 50% of the brooch is present, with the pin, catch-plate and foot missing. In plan, the brooch is almost T-shaped, and D-shaped in cross section. The bow head is hump-like, and angular (comma shaped) in profile, with cylindrical wings projecting from either side at the top. Each wing has a semi circular pierced wing cap. Ridges are present at the shoulders of the brooch. The back of t…
Created on: Thursday 21st September 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-C1BFD6
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy rotary key of probable Medieval dating (AD 1150 to AD 1400). Around 50% of the key is present. It is irregular in shape and cross section. The bow is incomplete. The bow was probably original sub circular or lozenge in shape. The shank is attached to the bow at the mid point of the right hand side. The shank consists of a solid rod, rectangular in plan and sub rectangular in cross section. The bit is sub rectangular in plan and cross section. No clefts are visible. The key measures 31.8 mm in length, 9.9 mm wide and is 3.…
Created on: Thursday 21st September 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-C1AA16
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy dress hook (single sharp hooked eye), of Early Post Medieval dating (AD 1500 to AD 1600). Around 50% of the dress hook is present, with the hook and part of the trefoil openwork design incomplete. The hooked eye is irregular in plan, and rectangular in section. It is of an openwork design, with a large sub rectangular eye section. The openwork plate consists of a hatched Hungerford knot in a trefoil shape, with two undecorated pellets at the junction between the eye and the plate. The outer loops are incomplete. The reverse is undecorated. Th…
Created on: Thursday 21st September 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-C18BFC
Object type: BUCKLE
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete, copper alloy, single-looped buckle dating to the period AD 1250-AD 1400.  Less than 25% of the buckle is present, consisting only of the expanded outer edge. The sheet roller is missing.  The buckle measures 29.1 mm in length, 10.3 mm in width and 5.9 mm in thickness, and weighs 4.4 g. The buckle is a dark green colour, with an even surface patina. Abrasion, caused by movement while within the plough soil, has resulted in a loss of some of the surface detail. A parallel to this buckle is illustrated in Whitehead …
Created on: Thursday 21st September 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-C15A36
Object type: TOY
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lead or lead alloy toy male figurine or doll, of Mid 17th Century dating (AD 1625 to AD 1675). Around 50% of the figurine is present, with the head, arms and lower legs missing. The torso and upper legs are present. It is a three dimensional solid cast figure with decorational details on both sides. The figurine is depicted wearing a breast plate over a short apron-fronted buff coat and is wearing baggy breeches which stop just above the knee.  He measures 30.9 mm in height, 14.0 mm wide and 4.3 mm thick. It weighs 7.1 g. The figurine is a mid grey colour, with an…
Created on: Thursday 21st September 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-C10047
Object type: SPUR
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy star rowel from a rowel spur, of Medieval dating (AD 1200 to AD 1500). Less than 25% of the star rowel is present, with the centre and the base of five points surviving. Originally it would have had eight points.Each surviving point is sub-lozenge shaped, with one end, broadly rectangular/square in section, being joined to the centre of the rowel and the other end, circular in section, tapering to an incomplete blunt point. In the centre of the rowel is a hole (internal diameter 4.5 mm) through which a rivet would have passed, s…
Created on: Thursday 21st September 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-C0E4A1
Object type: VESSEL
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy foot / leg from a copper alloy cooking vessel of Late Medieval to Early Post Medieval dating (AD 1400 - AD 1700). The vessel fragment is sub rectangular in shape and sub circular in cross section. It consists of a straight piece with a rounded base. The internal surface is rough. At the top of the leg, an irregular surface is present, this would have adjoined to the base of the cauldron. The base of the foot is slightly abraded.  It measures 44.7 mm in length, 39.3 mm wide and 13.7 mm thick. It weighs 94.7 g…
Created on: Thursday 21st September 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-C0D5AB
Object type: VESSEL
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy foot / leg from a copper alloy cooking vessel of Late Medieval to Early Post Medieval dating (AD 1400 - AD 1700). The vessel fragment is sub rectangular in shape and sub circular in cross section. It consists of a straight piece. The internal surface is rough. At the top of the leg, an irregular surface is present, this would have adjoined to the base of the cauldron. The base of the foot is slightly abraded. A black patina is present in patches. It measures 39.5 mm in length, 36.7 mm wide and 11.1 mm thick.…
Created on: Thursday 21st September 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-994029
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy Wroxeter type brooch of Roman dating (AD 80 to AD 200). The remains of the brooch consist of the head and bow. The spring, pin, foot and catchplate are missing.  The head has semi-circular wings projecting on either side, with semi-circular wing caps. No spring is present in the recess.  The upper section of the bows is decorated with a double vertical row of rectangular cells. No trace of surviving enamel is visible. Below the cells the bow has a moulded ‘V’ shaped knop. Below this the bow then gradually tapers to a da…
Created on: Tuesday 19th September 2023
Last updated: Monday 20th November 2023
Spatial data recorded.

Record ID: WMID-F0E86E
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy possible African coin of probable Post Medieval dating (AD 1700 to AD 1900. Edges of the probable coin exhibit layers. Obverse: Probable negro head facing left, hoop earring, hair tied back to the right. Reverse: unclear. Diameter: 18.2 mm Thickness: 3.6 mm Weight: 4.0 g.
Created on: Monday 11th September 2023
Last updated: Monday 20th November 2023
Spatial data recorded.

Record ID: WMID-B74EEA
Object type: PIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy pin of probable Roman dating (AD 43 to AD 410). Less than 50% of the pin is present, consisting of the head and part of the shank. The shank has a rectangular cross section. The head is conical, with a flattened circular top. The base of the head has facetted sides which continue into the shank. No collar is present at the base of the head. The shank is not straight but exhibits a curve towards the end. The break is patinated. It measures 30.0 mm in length. The head has a diameter of 9.0 mm and is 11.4 mm long. The shank is 2.6 mm wide by 2.1 mm thick.…
Created on: Tuesday 15th August 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-A326E0
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy Colchester derivative (Polden Hill) brooch of Roman date (AD 80-120).  Around 50% of the brooch is present. The pin, spring, foot and catch-plate are missing.  The head has the base of the rearward facing hook still in place and the wings have perforated end caps. Semi-circular mouldings are at the sides of the head. The head and bow have two central vertical incised lines which is decorated with a repeating pattern of notches located along the centre of the bow. The lower bow and foot are undecorated. On the reverse of the hea…
Created on: Monday 14th August 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-A2D74A
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy Colchester derivative Polden Hill brooch of Roman date (AD 80-120). Only the head, two wings and bow remain. The right hand wing is partially remaining with the spring, pin, foot and catch plate missing. A semi-circular pierced end cap is present at the end of the wings. The bow head is slightly angular (comma shaped). Located at the reverse of the head is a broadly oval concave recess where the spring would have been held in place. The bow tapers from the head to a pointed damaged and incomplete foot. A vertical ridge runs the length of the b…
Created on: Monday 14th August 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-39F32B
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy brooch of Colchester derivative Polden Hill (Mackreth Group 4, flat wing ends), Mackreth 2011, 4.a. Plate 46, of Roman date (AD 80 to AD 120). Approximately 50% of the brooch is present, with the pin, catch-plate and foot missing. In plan, the brooch is almost T-shaped, and D-shaped in cross section. The bow head is hump-like, and angular (comma shaped) in profile, with cylindrical wings projecting from either side at the top. The remains of a rearward facing hook Each wing has a semi circular pierced wing cap. Ridges are present at the …
Created on: Wednesday 9th August 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-39D76E
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy brooch of Colchester derivative Polden Hill (Mackreth Group 4, flat wing ends), Mackreth 2011, 4.a. Plate 46, of Roman date (AD 80 to AD 120). Approximately 50% of the brooch is present, with the pin, catch-plate and foot missing. In plan, the brooch is almost T-shaped, and D-shaped in cross section. The bow head is hump-like, and angular (comma shaped) in profile, with cylindrical wings projecting from either side at the top. Each wing has a semi circular pierced wing cap. Ridges are present at the shoulders of the brooch. The back of t…
Created on: Wednesday 9th August 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-910730
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy brooch of Colchester derivative Polden Hill (Mackreth Group 4, flat wing ends), Mackreth 2011, 4.a. Plate 46, of Roman date (AD 80 to AD 120). Approximately 50% of the brooch is present, with the pin, catch-plate and foot missing. In plan, the brooch is almost T-shaped, and D-shaped in cross section. The bow head is hump-like, and angular (comma shaped) in profile, with cylindrical wings projecting from either side at the top. The centre of the bow has been decorated with a central vertical ridge. Ridges are present at the shoulders of t…
Created on: Tuesday 1st August 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-8FF983
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy catch plate from a Brooch of Roman dating (AD 43 to 300). Less than 25% of the brooch is present, consisting of the catch plate only. The rest of the brooch is missing, presumed lost in antiquity. The catch plate is triangular in shape, and has the lower part of the bow present. The folded rim is missing. It measures 21.6 mm in length, 3.6 mm wide and 8.5 mm thick. It weighs 0.8 g. The catch plate is a mid green colour with an even surface patina. Triangular catch plates are common to many different styles of brooch, mostly likely Roman in date.
Created on: Tuesday 1st August 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-8F899C
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete silver penny of Henry III (AD 1216 to AD 1272), dating to the period AD 1248 to AD 1250. Class III. Minted by moneyer Willelm, in either Canterbury or Carlisle mint. C.f. North, vol 1, p 226, no 986-988. Diameter: 17.8 mm Thickness: 0.9 mm Weight: 1.0 g.
Created on: Tuesday 1st August 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-8E2B3D
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy dupondius or As of uncertain Emperor, but of first to third century AD dating. Reverse type uncertain. Mint probably Rome.  Diameter: 30.1 mm Thickness: 3.5 mm Weight: 10.8 g
Created on: Tuesday 1st August 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-8DEBFD
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
A complete copper alloy radiate of Claudius II (AD 268-270) dating to circa AD 268-270 (Reece Period 14). LIBERT AVG reverse type depicting Libertas standing left holding pileus and vertical sceptre. Uncertain mint.  Diameter: 20.1 mm Thickness: 1.5 mm Weight: 2.6 g
Created on: Tuesday 1st August 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-8C5E8B
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy half penny trade token, issued by Richard Whitmore of Stone in 1667. C.f. Williamson, Staffordshire, 72. p 1057. Diameter: 16.6 mm Thickness: 0.8 mm Weight: 0.8 g
Created on: Tuesday 1st August 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-8C2667
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete silver penny of Edward I (AD 1272 to AD 1307), probably dating to the period AD 1300 to AD 1305. Class 10cf. Minted at Canterbury. Coin has been doublestruck on the obverse. Diameter: 18.5 mm Thickness: 1.0 mm Weight: 1.0 g.
Created on: Tuesday 1st August 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-29D014
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy brooch of Colchester derivative Polden Hill (Mackreth Group 4, flat wing ends), Mackreth 2011, 4.a. Plate 46, of Roman date (AD 80 to AD 120). Approximately 50% of the brooch is present, with the pin, catch-plate and foot missing. In plan, the brooch is almost T-shaped, and D-shaped in cross section. The bow head is hump-like, and angular (comma shaped) in profile, with cylindrical wings projecting from either side at the top. Each wing has a semi circular pierced wing cap. Ridges are present at the shoulders of the brooch. A central ver…
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-27FD4B
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy brooch of Colchester derivative Polden Hill (Mackreth Group 4, flat wing ends), Mackreth 2011, 4.a. Plate 46, of Roman date (AD 80 to AD 120). Approximately 50% of the brooch is present, with the pin, catch-plate and foot missing. In plan, the brooch is almost T-shaped, and D-shaped in cross section. The bow head is hump-like, and angular (comma shaped) in profile, with cylindrical wings projecting from either side at the top. Each wing has a semi circular pierced wing cap. Ridges are present at the shoulders of the brooch. The back of t…
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-27878E
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy trumpet-style brooch, of the Roman period (AD 100-200). The head and upper part of the bow are intact. The loop, pin, spring, foot and catchplate are all missing.  The head is circular in shape, with a single spring loop on the back. The head continues downwards into the bow. A swelling is present at the mid point with a horizontal groove above and below. Beneath the swelling, the remains of the bow have a triangular cross section, with each side bevelled. The brooch measures 39.5 mm in length, 11.7 mm in width across the head…
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-274B9B
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy Polden Hill style brooch, of Roman dating (AD 60 to AD 120).  Around 50% of the brooch is present, consisting of a partial bow, one complete wing and one incomplete. The rest is missing, presumed lost in antiquity. The wings are cylindrical with a slot for the pin (now missing). No wing caps are present. The wings have been decorated with a double vertical groove. The bow is humped, and tapers to a blunt point. The bow has been decorated with a central vertical groove.  It measures 14.9 mm in length, 24.9 mm wide (across the wings) and 6.1 mm thi…
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-24C70A
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy probable Polden Hill brooch, of Roman dating (AD 80 to AD 120). Less than 25% of the probable Polden Hill brooch is present, consisting of part of the head and one wing. The wing is semi-cylindrical, with a semi circular wing cap on the end. The reverse of the head and the wing are empty.  It measures 13.6 mm in length, 18.4 mm wide and 12.1 mm thick. It weighs 2.7 g. The brooch is a mid to dark green colour, with an even surface patina. Abrasion, caused by movement while within the plough soil, has resulted in a loss of some of the original surface d…
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-2467A5
Object type: WEIGHT
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lead or lead alloy bi-conical weight, of Medieval to Post Medieval dating (AD 1200 to AD 1600). The weight has a rounded base. The sides taper inwards towards the top. The remains of an iron suspension loop are present in the top of the weight. It measures 34.0 mm in height and a maximum diameter of 18.8 mm. It weighs 35.9 g or 1.27 oz. It is a light to mid grey colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the original surface detail.
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-23F776
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete probable casting jet from copper casting, of uncertain dating (2350 BC to AD 1800). The casting jet is conical in shape. The top surface is sub oval in shape, with a rounded edge, and a concaved surface. Below this, the jet narrows to a point, with slightly facetted sides. It measures 13.9 mm in length, 20.7 mm wide and 20.7 mm thick. It weighs 14.2 g. The casting jet is a mid to dark green colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the original …
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-23DBAA
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete probable casting jet from copper casting, of uncertain dating (2350 BC to AD 1800). The casting jet is conical in shape. The top surface is sub oval in shape, with a rounded edge, and a concaved surface. Below this, the jet narrows to a point, with slightly facetted sides. It measures 14.8 mm in length, 17.8 mm wide and 13.3 mm thick. It weighs 6.2 g. The casting jet is a mid to dark green colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the origi…
Created on: Thursday 27th July 2023
Last updated: Thursday 25th January 2024
Spatial data recorded.

Record ID: WMID-23A785
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lead alloy uncertain artefact of uncertain function and form, probably of Post Medieval dating (AD 1600 to AD 1800). The artefact is cylindrical in shape. The ends are incomplete. Along the length of the body, are longituditual ridges, with possible zig zag decoration between them. It has a length of 19.5 mm, is 11.3 mm wide and 8.6 mm thick. It weighs 11.7 g. The artefact is a mid grey colour, with an even surface patina. Abrasion, caused by movement while within the plough soil, has resulted in the loss of some of the original surface detail.
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-2357D2
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy domed button of Early Post Medieval dating (AD 1500 to AD 1600). Around 50% of the button is present, consisting of the domed head. The shank is missing. The domed head is undecorated apart from a concentric circle around the base of the head. The back is flat. A scar is present where the shank should have been. It has a diameter of 17.9 mm and is 11.2 mm thick. It weighs 11.1 g. The button is a dark green colour with an even surface patina. Some iron corrosion products are present on the surface.
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-232FA7
Object type: TOY
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lead alloy eight spoked wheel, probably from a toy of Post Medieval dating (AD 1600 to AD 1800). Less than 25% of the wheel is present, consisting of the central hub and the remains of four spokes. There are scars around the midpoint of the hub indicating that there was originally eight spokes. The front of the hub is a raised conical area with a flattened top. Concentric circles decorate it at the top and the bottom. The reverse of the hub is flattened with concentric circles decorating it. Iron corrosion products in the centre indicate that the axle may have been …
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-22C0D8
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy uncertain artefact of uncertain function and dating, but probably Roman to Post Medieval (AD 43 to AD 1650). The object is flat, and irregular in shape. It is probably the left hand corner of an object, possibly a buckle frame. It has an openwork centre, consisting of a circle and an teardrop shape, now joined but originally separated by a bar. The outer edges of each shape are bevelled. The right hand edge is incomplete and is the broken edge of a circle. The outer edges are bevelled. The reverse is flat. It measures 21.7 mm in length, 24.6 mm wide and 3.1…
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-A62F33
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete uncertain copper alloy artefact, possibly a spoon handle, of uncertain dating,possibly Roman (AD 43 to AD 410). Less than 25% of the possible spoon is present, consisting of part of the handle and potentially part of the 'dog-leg' junction between handle and spoon. The 'dog-leg' consists of two curved sections, with three points of potential contact to the bowl. The handle is rectangular and tapers to a blunt point. It measures 50.9 mm in length, 18.4 mm wide and 4.0 mm thick. It weighs 5.5 g. The artefact is a dark grey colour, with an even surface pat…
Created on: Friday 21st July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-7A9E3B
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy artefact of uncertain function and dating, but probably Post Medieval in dating (AD 1600 to AD 1800). The artefact is rectangular in shape, with a circular cross section. It has a circular terminal with a square central hole (internal diameter 6.3 mm by 5.8 mm), with a rectangular slot coming off one side. This end is hollow to a depth of 13.9 mm. The middle part is cylindrical, and then it curves down and flattens out. This terminal exhibits a patinated break. Lots of scars or V shaped removals are present all over the surface. It measures 35.4 mm in lengt…
Created on: Wednesday 19th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-7A6063
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy object of uncertain function and dating, possibly Roman to Post Medieval (AD 43 to AD 1800). The object is irregularly shaped, with a bulbous end and a narrow end. Patinated post-depositional damage has affected most surfaces. It measures 20.7 mm in length, 7.3 mm maximum width, and 2.2 mm thick. It weighs 1.5 g. The object is a mid green colour, with an even surface patina. Abrasion, caused by movement while within the plough soil, has resulted in the loss of the majority of the original surface. This object may be part of a Roman hair pin or brooch but …
Created on: Wednesday 19th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-7A2413
Object type: PENDANT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete lead alloy probable pendant of probable Post Medieval dating (AD 1600 to AD 1800). The probable pendant is sub square in shape and flat. It has a circular suspension hole towards the top of the probable pendant, orienting the square as a lozenge. This has an internal diameter of 4.8 mm. Both faces bear inscribed decoration either as diagonal 'rays' or as a grid design. No rim is present around the edge. It has a length of 26.2 mm and is 25.7 mm wide. It is 2.4 mm thick. It weighs 8.3 g. The pendant is an off white to light grey colour with an even surface pat…
Created on: Wednesday 19th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-79D230
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete curved copper alloy fragment of uncertain dating but probably Post Medieval (AD 1500 to AD 1800). The fragment is sub rectangular in shape, and is convex. Both long edges are complete, the other edges incomplete with post-depositional patinated breaks. A rim is present along both long edges. Both upper and lower surfaces are smooth. The curvature is consistent with a 1 cm rim diameter and 50% of the rim is present. It measure 11.3 mm in length, 16.1 mm wide and 4.6 mm thick. It weighs 3.9 g. The fragment is a dark green colour, with an even sur…
Created on: Wednesday 19th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-791387
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete curved copper alloy fragment of probable Post Medieval dating (AD 1500 to AD 1800). The fragment is sub rectangular in shape, and is convex. The lower edge is complete, the other edges incomplete with post-depositional patinated breaks. A rim is present along the lower edge. The outer surface is smooth, the inner rough and unpolished. The curvature is consistent with a 3 cm rim diameter and 20% of the rim is present. It measure 13.5 mm in length, 19.2 mm wide and 2.9 mm thick. It weighs 2.9 g. The fragment is a dark green colour, with an even surface patina.  The…
Created on: Wednesday 19th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

• 

  Image not taken

Record ID: WMID-6813F6
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete post-Medieval copper-alloy hooked strap-fitting for a sword-belt (c. 1600-c. 1700). The main body of the fitting is sub-circular in plan, convex at the front and concave at the rear. The front of the main body has three vertical facets. Curvilinear decoration is visible on the front. At one end a rounded knop is pierced, with an internal diameter of 2.6 mm. Between the knop and main body there is a single transverse ridge. The rearwards projecting hook is 'D'-shaped in cross-section and incomplete. Between the hook and main body is a pair of transverse ridge…
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-67DBA1
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy socketed spear of Middle to Late Bronze Age dating (c. 1500 to 800 BC). The fragment is sub rectangular in shape, with a slight lentoid cross section. A central rib runs vertically on both faces. Not much survives of the wings, or of the tip. Old, post-depositional breaks are present along each edge.  The fragment measures 17.9 mm in length, 12.1 mm wide and 2.8 mm thick. It weighs 1.8 g. The fragment is a dark green colour with an even surface patina. Abrasion, caused by movement while within the plough soil, has resulted in the loss of the original …
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-66DE32
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy (bronze) socketed axehead fragment, of Late Bronze Age dating (c. 950 BC to c. 750 BC) Less than 25% of the axehead is present, consisting only of part of the body, blade and the remnants of the socket. It is missing the top part of the axehead and the loop. It is sub rectangular in plan, with an straight but abraded cutting edge. The socket is sub rectangular in section. The depth of the socket from the edge of the break to the base of socket is 21.8 mm. The two long sides of the axe expand slightly along the length of the socket and te…
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-6690EE
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy (bronze) flat axe of Early Bronze Age dating (c. 2350 BC to c. 2050 BC). Less than 25% of the flat axehead is present, consisting of the butt of the axe head. The flat axe fragment is broadly sub rectangular in shape with a rounded butt. In profile it is broadly lentoid, with slight tapering edges. The butt is relatively thin having a narrow rounded profile; the width at the butt is 26.8 mm (thickness: 2.7 mm). The sides of the axe gently expand in width from the butt to the midpoint; in shape they are relatively straight. …
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.