Back to simple search | Back to advanced search

    You searched for:

    • IdentifierID: 0014AC3448C01765
    • Sort: broadperiod

  • Thumbnail image of WAW-8245C8

Record ID: WAW-8245C8
Object type: SCOOP
Broad period: UNKNOWN
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy scoop or implement of uncertain dating. The implement is sub rectangular in both plan and cross section. The front consists of a rectangular handle, with an oval depression (scoop) in the lower end. An old break is present at the upper point of the handle, where it has split into three thin metal rods. At this end of the handle, it would appear to be the start of openwork decoration, however due to the break, the exact form and style of this decoration is unknown. The back of the implement has a swelling at the back of the scoop, t…
Created on: Monday 8th November 2010
Last updated: Monday 28th November 2016
Spatial data recorded.


  • Thumbnail image of WAW-1671A0

Record ID: WAW-1671A0
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
A sub circular silvered copper alloy object, of possible Roman dating (1 to 410 AD). It is sub circular in plan, and D shaped in section. The top surface is smooth and domed, with a couple of uneven projections. The lower surface is flat. It measures 20.45mm in length, 21.34mm wide and 6.27mm thick. It weighs 13.1grams. The object could be a piece of casting waste, but there are traces of silvering on a couple of areas on both surfaces. The patina is similar to that found on early Roman coins, but this object is too thick to be a coin.
Created on: Tuesday 8th February 2011
Last updated: Tuesday 15th February 2011
Spatial data recorded.


  • Thumbnail image of WMID-69F813

Record ID: WMID-69F813
Object type: WHETSTONE
Broad period: UNKNOWN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete whetstone or hone, of uncertain dating, but probably Roman to Post Medieval (AD 43 to AD 1800). The whetstone is sub rectangular in plan, and triangular in section. It has been made from a fine grained sedimentary sandstone or siltstone. An old diagonal break along the length is present on the reverse, giving the whetstone fragment the triangular shape. A figure of eight shaped perforation is present at the top, indicating that it had been created by the use of a drill on either side. The top of the whetstone has been bevelled on either side, to create a blunt top. The…
Created on: Wednesday 17th July 2013
Last updated: Wednesday 17th July 2013
Spatial data recorded. This findspot is known as 'North Warwickshire', grid reference and parish protected.


  • Thumbnail image of LVPL-DEA6C0

Record ID: LVPL-DEA6C0
Object type: CASTING WASTE
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of cast copper alloy, probable casting waste, of uncertain dating (2150 BC to 1700 AD). However, due to the lack of context and continuation of casting styles, this fragment could be dated from the Bronze Age through to the Post Medieval Period (c.2150 BC - 1700 AD). The fragment is irregular in plan and cross section. It has an irregular, rough surface. It is a mid to dark green colour. An even patina covers the surface. It measures 49.21mm in length, 40.37mm wide and 6.65mm thick. It weighs 16.1 grams. In appearance, the fragment does display some similar…
Created on: Monday 12th September 2011
Last updated: Thursday 28th March 2013
Spatial data recorded. This findspot is known as 'Selby area', grid reference and parish protected.


  • Thumbnail image of LVPL-1F3DD4

Record ID: LVPL-1F3DD4
Object type: BOX
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy, probable corner brace or staple, probably from a box, of probable Medieval dating (13th to 17th Centuries AD). The brace is L shaped in plan. The long edge has a rectangular section and has a blunt, rounded terminal. The short edge has a circular section, and has a sharp point. The brace is a mid to dark green colour, with an even surface patina. It measures 25.59mm in length, 19.65mm wide and 4.65mm thick. It weighs 2.7 grams. This artefact is probably a structural fitting of some form, the form is suggestive of a corner brace or a staple, howeve…
Created on: Thursday 15th September 2011
Last updated: Thursday 28th March 2013
Spatial data recorded. This findspot is known as 'North Yorkshire', grid reference and parish protected.


  • Thumbnail image of LVPL-4FCEE2

Record ID: LVPL-4FCEE2
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy artefact of uncertain dating and function. The artefact consists of a circular sectioned handle, with incomplete tip. The base of the handle has been decorated with a raised collar, and then an oval swelling. The top of the artefact is incomplete and has the remains of four curved arms. It is a dark green colour, with a slightly abraded uneven patina. It measures 43.81mm in length, 23.61mm wide and 7.00mm thick. It weighs 6.6 grams. The original function and hence dating of this artefact is uncertain, it demonstrates similar characteristics to a h…
Created on: Wednesday 24th August 2011
Last updated: Thursday 28th March 2013
Spatial data recorded. This findspot is known as 'Selby area', grid reference and parish protected.


  • Image not taken

Record ID: WAW-FFEA67
Object type: MAMMAL REMAINS
Broad period: UNKNOWN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
One fragment of cow bone. The fragment consists of a section of a right rib belonging to a cow sized animal. Muscle attachments are pronounced. Butchery marks along with modern post mortem breaks are present. It demonstrates signs of abrasion. Not photographed.
Created on: Tuesday 4th May 2010
Last updated: Wednesday 4th August 2010
Spatial data recorded.


  • Thumbnail image of WMID-7CF056

Record ID: WMID-7CF056
Object type: WEIGHT
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy weight, of probable Late Medieval to Post Medieval dating (AD 1300 to AD 1800). The weight is cylindrial in plan, and sub circular in cross section. One end has been squashed together. The central hole has an internal diameter of 8.1 mm. Corrosion products and soil are still present inside the central perforation. It is a light to mid grey colour, with an even surface patina. Abrasion, probably caused by movement in the plough soil, has resulted in the loss of a significant proportion of the original surface. It measures 42.6 mm long, has a diame…
Created on: Wednesday 23rd October 2013
Last updated: Thursday 7th November 2013
Spatial data recorded.


  • Image not taken

Record ID: WAW-7DC898
Object type: MAMMAL REMAINS
Broad period: UNKNOWN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
One fragment of cow bone. The fragment consists of the distal (lower) end of a left tibia belonging to a cow sized animal. Muscle attachments are pronounced. Modern post mortem breaks are present. It demonstrates signs of abrasion. Not photographed.
Created on: Monday 10th May 2010
Last updated: Wednesday 4th August 2010
Spatial data recorded.


  • Image not taken

Record ID: WAW-96BF74
Object type: MAMMAL REMAINS
Broad period: UNKNOWN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
One fragment of sheep bone. The fragment consists of the proximal (upper) end of a metatarsel/metapodium belonging to a sheep sized animal. Modern post mortem breaks are present. It demonstrates signs of abrasion. Not photographed.
Created on: Tuesday 11th May 2010
Last updated: Wednesday 4th August 2010
Spatial data recorded.


  • Thumbnail image of WMID-1E0966

Record ID: WMID-1E0966
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy fitting of uncertain form, function and dating. The object is semi circular in plan, and sub rectangular in cross section. File marks are present on the exterior curved surface. The remnants of a vertical perforation are present at either end. A horizontal casting flash is present on the interior curved surface. It measures 63.09mm in length, 14.73mm wide and 10.46mm thick. It weighs 48.6 grams. No direct parallel has yet been found for this artefact. Suggestions have included part of a circular fixed seating for something else (ie bottom bit, thi…
Created on: Thursday 13th September 2012
Last updated: Tuesday 9th October 2012
Spatial data recorded.


  • Thumbnail image of WMID-24AB05

Record ID: WMID-24AB05
Object type: FINGER RING
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Published Find published
Description: A complete cast silver coiled or spiral, probable finger ring, of uncertain dating (100 BC to 800 AD). The probable finger ring consists of a D-section length of silver metal twisted into a spiral. One end of the piece of silver tapers to a point, the other is square ended, probably incomplete. No makers' marks are present on the interior or exterior. Some vertical scratch marks are present on the interior. The probable finger ring is shiny light grey colour, with an even surface patina. Dimensions: It has an exterior diameter of 23.78 mm, an interior diameter of 18.…
Created on: Tuesday 14th May 2013
Last updated: Wednesday 17th May 2017
Spatial data recorded. This findspot is known as 'Tamworth', grid reference and parish protected.


  • Thumbnail image of WMID-668006

Record ID: WMID-668006
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy unidentified object, of unknown dating (0 to AD 1900). The object is irregular in shape. It consists of a rectangular sectioned bar with a curved hook at the end. The otherr end exhibits an elaborate moulding, possibly similar to that of a Phrygian hat. An sub oval collar sits beneath the elaborate moulding and the rectangular sectioned bar. The bar has a rectangular notch removed from one side. It measures 34.5 mm in length, 13.0 mm wide and 8.8 mm thick. It weighs 7.2 g. The object is a dark brown colour, with an even surface patina. No direct …
Created on: Tuesday 22nd October 2013
Last updated: Tuesday 22nd October 2013
Spatial data recorded.


  • Thumbnail image of WMID-B5A7E7

Record ID: WMID-B5A7E7
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy horse's leg, of uncertain function and dating, but probably Post Medieval (AD 1700 to AD 1900). The artefact consists of a moulded horse's leg, with circular cross section in the middle and D shaped to the top and bottom. The ankle and knee joints are represented along with the edge of the hoof and the frog in the centre of the foot. It measures 58.63 mm in length, 8.91 mm wide and 6.14 mm thick. It weighs 8.9 g. The artefact is a light green to mid brown colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough …
Created on: Tuesday 21st May 2013
Last updated: Tuesday 21st May 2013
Spatial data recorded.


  • Thumbnail image of WMID-FD5525

Record ID: WMID-FD5525
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Isle of Anglesey
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy artefact, of uncertain function and dating, possibly Medieval to Post Medieval (AD 1000 to AD 2000). The artefact is irregular in plan. It broadly resembles a flat two pronged fork. The 'handle' has a square section and both prongs also have a square section. The shoulders are straight. No decoration is present on the front or reverse of the artefact. Neither the 'handle' or the 'prongs' are complete, both exhibit evidence of pre depositional breaks. It measures 45.78 mm in length, 19.13 mm wide and 5.41 mm thick. It weighs 15.3 g. It is a light t…
Created on: Monday 4th February 2013
Last updated: Monday 4th February 2013
Spatial data recorded.


  • Thumbnail image of WMID-FEF5A1

Record ID: WMID-FEF5A1
Object type: WASTE
Broad period: UNKNOWN
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
A complete roll of sheet lead alloy, of uncertain date and function (AD 43 to AD 1800). The artefact consists of a rectangular strip of lead sheet, tightly rolled up into a cylinder. It measures 17.81 mm in length, 11.56 mm wide and 10.64 mm thick. It weighs 13.0 g. The roll of lead is a light to mid grey colour, with an even surface patina. The Romans did have curse tablets which consisted of writing a curse on a small piece of lead sheet and then rolling it up before offering it to the gods, many have been found in the spring at Bath. As stray finds, out of context (and stil…
Created on: Thursday 18th April 2013
Last updated: Thursday 18th April 2013
Spatial data recorded.


  • Thumbnail image of WMID-1108A2

Record ID: WMID-1108A2
Object type: AWL
Broad period: UNKNOWN
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy, probable awl, of unknown dating, but probably Roman to Post Medieval (AD 43 to AD 1800). Both ends of the awl are complete, and taper to a sharp point. One half of the artefact is conical in shape, whereas the other half is square sectioned. The square sectioned end exhibits a 90 degree bend. The square sectioned end forms the tang and would have been for insertion into a wooden handle. It measures 52.27 mm in length, 6.16 mm wide and 11.33 mm thick. It weighs 6.4 g, The awl is a mid brown to mid green colour, with an uneven surface patina. Abrasion…
Created on: Friday 19th April 2013
Last updated: Friday 19th April 2013
Spatial data recorded.


  • Thumbnail image of WMID-2E1881

Record ID: WMID-2E1881
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy object of uncertain function and dating. The artefact is semi circular in plan, and rectangular in section. An old, predepositional break is present along the straight end, and the artefact decreases in thickness from the straight edge, down to the rounded edge. No decoration is present. It measures 30.40 mm in length, 15.37 mm wide and has a maximum thickness of 7.00 mm. It weighs 11.7 g. The object is a mid to dark green colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some o…
Created on: Thursday 20th June 2013
Last updated: Thursday 20th June 2013
Spatial data recorded.


  • Thumbnail image of WMID-2E9C23

Record ID: WMID-2E9C23
Object type: COIN
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver possible coin, of possible Roman dating (AD 43 to AD 410). The possible coin is misshapen, possibly due to having been subjected to a heat source. Both the obverse and reverse are unclear. It is possible to make out the remains of probable letters along one edge, reading [ ]IVS[ ]. Diameter: 13.70 mm Thickness: 1.93 mm Weight: 1.3 g. The identification of this artefact as a coin is only a possibility, due to the shape and thickness. It is possibly a piece of undiagnostic casting waste.
Created on: Thursday 20th June 2013
Last updated: Thursday 20th June 2013
Spatial data recorded.


  • Thumbnail image of WMID-0AA5B2

Record ID: WMID-0AA5B2
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete probable casting jet from copper casting, of uncertain dating (2350 BC to AD 1800). The casting jet is conical in shape. The top surface is sub oval in shape, with a rounded edge, and a concaved surface. Below this, the jet narrows to a point, with slightly facetted sides. It measures 14.2 mm in length, 26.7 mm wide and 21.0 mm thick. It weighs 28.5 g. The casting jet is a mid to dark green colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the original surface.
Created on: Friday 28th February 2014
Last updated: Wednesday 23rd November 2016
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 5,668
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 10,207
  • Mean quantity: 1.801
  • Maximum: 324

Filter your search

1 - 20 of 5,668 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.