Record ID: WILT-0BD053
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy double loop buckle dating to the period c. AD 1550 - c.1650. The frames edges remain even are rather fine and do not bevel. The buckle has moulded roundels on the outer edge of each loop, and at either end of the strap bar. On the roundels on the both the outer edges is a flower design. The pin is missing. Overall, the buckle is 48.05mm in length, 27.7mm in width (maximum) and weighs 4.42 grams. A parallel to this buckle can be found in Whitehead (2003) "Buckles" page 51, No. 410.
Created on: Wednesday 26th April 2017
Last updated: Wednesday 26th April 2017
Spatial data recorded.

Record ID: WILT-6A9E07
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A medieval copper alloy single loop rectangular buckle frame with plate dating to AD 1200-1400. The buckle is broadly rectangular, the outer edge of the loop is orval in cross section and slightly narrowed in contrast to the edges of the frame. The edges of the frame curve outwards slightly and are rectangular in cross section. The pin bar is narrowed and the pin survives. The plate is formed from a single rectangular copper-alloy sheet which has been folded over the pin bar. There is a central recess for the pin. At the tip of the plate are two incomplete circular perforations…
Created on: Wednesday 31st August 2016
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Breamore', grid reference and parish protected.

Record ID: WILT-B45696
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete copper alloy gilded medieval single loop D-shaped buckle missing its pin dating to c AD 1250-1450. The buckle frame is broadly D shaped with three expansions, it is D shaped in cross section. A rivet with a rounded top is located within a perforation in each of these expansions. The pin bar is narrowed and recessed. The reverse of the buckle is flat. The buckle is 23.4mm in length, 25.45mm wide, 4.6mm maximum thickness and weighs 3.43 grams.
Created on: Wednesday 10th August 2016
Last updated: Thursday 9th August 2018
Spatial data recorded.

Record ID: WILT-B439B7
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete copper alloy medieval single loop D-shaped buckle with lipped frame dating to c AD 1250-1450, the pin is missing. The buckle frame is D-shaped with a slightly lipped frame decorated with a circumferential groove. The frame narrows and is connected by a circular profile pin bar. The buckle is 12.7mm in length, 18.55mm wide and weighs 1.38 grams.
Created on: Wednesday 10th August 2016
Last updated: Friday 31st August 2018
Spatial data recorded.

Record ID: WILT-CD4619
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete copper alloy medieval to post-medieval double loop annular buckle dating to c AD 1350-1650. The buckle is circular and undecorated. The sides are bevelled so that the profile is D shaped. There is an integral bar across the centre of the circular band which also has bevelled sides. The pin is missing. Cf Whitehead, 2003, Buckles 1250-1800, Greenlight Publishing, Witham p 44 no 251.
Created on: Wednesday 6th July 2016
Last updated: Wednesday 6th July 2016
Spatial data recorded.

Record ID: WILT-CD0A21
Object type: BUCKLE
Broad period: ROMAN
County: Wiltshire
Workflow stage: Published
An incomplete copper-alloy Roman to early-medieval buckle 'crescent' single loop buckle. The buckle is incomplete and would have been D shaped, the pin bar is missing. The loop is curved and thickens towards the tips to form a circular perforated projection which would have held the pin bar. Before the projections are zoomorphic depictions, possibly Dolphins. The upper face of the buckle is decorated with concentric punches along its length, the internal edge of the buckle is bevelled. The centre of the loop is decorated with two projections with a groove running along their length. …
Created on: Wednesday 6th July 2016
Last updated: Tuesday 27th June 2017
Spatial data recorded.

Record ID: WILT-CC3A1F
Object type: BUCKLE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete copper alloy double looped spectacle buckle of medieval to post medieval date (c. AD 1350 - 1650). The pin is missing. The buckle measures 23.65mm in length, 19.45mm in width, is 3.05mm thick and weighs 3.28g. The frame consists of two D-shaped loops positioned back to back and divided by the central pin bar. The outer edge of the frame is bevelled. The reverse is flat.
Created on: Wednesday 6th July 2016
Last updated: Wednesday 6th July 2016
Spatial data recorded.

Record ID: WILT-4D0C27
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete copper alloy double looped spectacle buckle of medieval to post medieval date (c. AD 1400 - 1650). The pin is missing. The buckle measures 26.85mm in length, 29.8mm in widths, is 3.1mm thick and weighs 6.73g. The frame consists of two D-shaped loops positioned back to back and divided by the central pin bar. The outer edge of the frame is bevelled.
Created on: Monday 18th April 2016
Last updated: Wednesday 22nd August 2018
Spatial data recorded.

Record ID: WILT-387028
Object type: BUCKLE
Broad period: MEDIEVAL
County: Swindon
Workflow stage: Awaiting validation
A copper alloy medieval buckle dating to the period c. AD 1250 - 1400. The pin survives but is damaged. The frame of the buckle is broadly ovular in shape with a small projecting knop at each end of the pin bar. The outer edge of the buckle features two moulded projecting knops and two transverse grooves which would have flanked the pin rest. The pin tapers to the point and measures 23mm in length and 2.05mm wide. The buckle measures 23.5mm in length, 33.4mm wide and weighs 7.78 grams.
Created on: Tuesday 5th April 2016
Last updated: Tuesday 3rd May 2016
Spatial data recorded.

Record ID: WILT-B5555C
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A incomplete copper-alloy post-medieval oval buckle frame with zoomorphic projections. The pin and majority of the pin bar are missing. The buckle frame is broadly triangular in cross section with a bevelled outer edge, the incomplete pin bar is triangular in cross section. The zoomorphic projections consist of a birds head and seven transverse grooves. The other projection is in the form of a tail expanding towards the tip and is decorated with four chevrons pointing towards the buckle frame. Cf. Whitehead (2003), nos.275 and 388, who gives the date range c.1550-1650. Probably 16t…
Created on: Wednesday 10th February 2016
Last updated: Wednesday 10th February 2016
Spatial data recorded.