Record ID: LEIC-049050
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval? copper alloy object, 17mm long, 14mm wide and 4mm thick. The object is in poor condition with a green patina and weighs 3.27grams. It has a semi-circular form and has a rounded upper surface with a flat underside. It has stamped circles over most of its surface and its underside has two large circular depressions and one small one. The small one corresponds to one on its upper surface and there is also one large depression which may correspond to one of those on the underside? The object may be part of a strap end or buckle??
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-5B4975
Object type: UNIDENTIFIED OBJECT
County: Leicestershire
Workflow stage: Published
unidentified metal object, 15mm long, 10mm wid eand 3mm thick, The object has a brown patina and weighs 1.30grams. It is sub rectangular in form and has one broken edge. It has two sub-spherical depressions in its upper surface, which may have held enamel? These sit below what appears to be a ridge, at this piont the object is broken. It may be a strap end or part of a mount?
Created on: Monday 27th April 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-E74735
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Rutland
Workflow stage: Awaiting validation
Unknown copper alloy object, 34mm long, 19mm wide and 4mm thick. The object is in fair condition and weighs 3.31grams. The object has a semi-circular section and consists of a gently curved section which has a sub rectangular protrusion emerging from its curved outer surface, just above where it turns sharply and continues as a straight semi-circular sectiond shaft. It may be some sort of edging or part of an unusual terret or harness fitting?
Created on: Thursday 25th November 2010
Last updated: Saturday 12th September 2020
Spatial data recorded.

Record ID: LEIC-84A861
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval or Post Medieval? lead alloy fragment, 29mm long, 26mm wide and 2mm thick. The object is in good condition and weighs 8.31grams. It is sub rectangular in form with a rounded end one side and a wider flat edge at the other. It curves slightly and is decorated with a border of semi-spheres which increase in size towrads the centre of teh rounded edge. A second straight row of these are placed down the centre reducung in size towards the straight edge. The ground is covered witha raised, uniforn cross hatching which is enclosed by two slightly curved lines sitting between the s…
Created on: Thursday 20th January 2011
Last updated: Thursday 20th January 2011
Spatial data recorded. This findspot is known as 'Leicestershire', grid reference and parish protected.

Record ID: LEIC-901996
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation
Unidentified copper alloy object, 16mm long, 11mm wide and 10mm thick. The object is in fair condition and weighs 6.04grams. The object is sub spherical and solid with evidence of a circular sectioned shaft emerging from each side near to its flat base.
Created on: Monday 14th February 2011
Last updated: Sunday 16th August 2020
Spatial data recorded.

Record ID: LEIC-490665
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Unidentified copper alloy object, 40mm long and 6mm in diameter, with a weight of 5.01grams. The object consists of a polyhedral terminal which is decorated with a series of ring and dot motifs. This adjoins a circular sectioned shaft which is decorated with a series of raised bands. After a step the object continues as an un- decorated shaft until it terminates in two prongs, both damaged. The object may be some sort of peg ? or be part of a larger implement. Compare SUR-1CCBA3.
Created on: Thursday 31st March 2011
Last updated: Tuesday 15th January 2019
Spatial data recorded.

Record ID: LEIC-1CB156
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
undated and unidentified copper alloy object, 25mm long, 20mm wide and 3mm thick. The object is a plate which has regular hand? drilled holes. It is sub rectangular in form in its present state and has one definite edge which is scalloped.
Created on: Wednesday 23rd June 2010
Last updated: Wednesday 7th December 2011
Spatial data recorded.

Record ID: LEIC-8816E3
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
Post Medieval copper alloy terminal? The object is 28mm long, 17mm wide and 3mm thick with a weight of 2.32grams. It is oval in form and semi-spherical in section and is decorated on its curved side with a pattern formed of punched cresent shapes. It has what may be closed eyes? picked out near the centre. There is also a small rectangular protrusion emerging from the slightly flattened edge.
Created on: Monday 28th June 2010
Last updated: Friday 20th November 2020
Spatial data recorded. This findspot is known as 'Rutland', grid reference and parish protected.

Record ID: LEIC-2E8968
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
unidentified object, 14mm in diameter and 18mm long, and weighs 5.23 grams. The object is spherical with a short shaft protruding from each end, one of which is possibly the remains of a loop.
Created on: Friday 30th July 2010
Last updated: Saturday 20th March 2021
Spatial data recorded.

Record ID: LEIC-5C3CF6
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval or post medieval lead alloy object, possibly a strap fitting? 30mm long, 19mm wide and 7mm thick. the object is in fair condition and weighs 6.12grams. It is incomplete but consists of a crescent shaped terminal made up of two sheets. This is attached to a narrow neck which then widens out into what may be an oval form. The larger portion has raised linear decoration radiate from the end of the neck. The crescent shaped section has a circular hole in its centre, suggesting this was holding something in the centre of the two halves?
Created on: Wednesday 13th October 2010
Last updated: Tuesday 20th October 2020
Spatial data recorded.

Record ID: LEIC-392602
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Nottinghamshire
Workflow stage: Awaiting validation
Undated copper alloy object, 22mm long, 10mm wide and 2mm thick. The object is in fair condition and weighs 0.83grams. It consists of a sub triangular plate which terminates in a point. It has an integral circular suspension loop in its wider edge and has a triangular protrusion to one side just below the loop.
Created on: Thursday 11th August 2011
Last updated: Thursday 11th August 2011
Spatial data recorded.

Record ID: LEIC-399E21
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Nottinghamshire
Workflow stage: Awaiting validation
undated and unidentified object, 18mm long, 14mm wide and 5mm thick. The object is in fair condition and weighs 3.53 grams. The object is sub rectangular in form and section and consists of two bars which are joined by two lines of sub-spherical 'knops' (one row of three above one row of four knops). The obbject is slightly flattened on its underside and is obviously fragmentery, the bars being broken at each edge.
Created on: Tuesday 23rd August 2011
Last updated: Tuesday 23rd August 2011
Spatial data recorded.

Record ID: LEIC-298001
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval? copper alloy loop, 26mm in diameter and 4thick. The object is in fair condition and weighs 4.87grams. The object consists of a circularloop with a sub-rectangular section. It has the remains of an attachment protruding from its outer edge, which has a sub rectangular section. The thickness would suggest a possible loop or hook rather than a bar or shaft?
Created on: Thursday 6th May 2010
Last updated: Tuesday 12th January 2021
Spatial data recorded.

Record ID: LEIC-6C8261
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
A possible Medieval unidentified copper alloy object, 38mm long 8mm wide and 4mm thick good condition weighs 5.66grams
Created on: Friday 20th November 2009
Last updated: Monday 10th September 2012
Spatial data recorded.

Record ID: LEIC-99D403
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval? copper alloy object, 53mm long, 8mm wide and 4mm thick. The object is in poor condition and weighs 4.84grams. The object is rectangular in section and form for its upper half, it then becomes more circular and narrows to a point. It has a sub-circular protrusion at its upper edge, making it reminiscent of a head and shoulders?
Created on: Thursday 29th October 2009
Last updated: Tuesday 27th April 2021
Spatial data recorded.

Record ID: LEIC-04E6B1
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated fragment of twisted gold wire, 30mm long,(50mm if unbent) and 3mm in diameter. The object is in good condition with a gold patina and weighs 6.16 grams. The object is circular in section and is twisted to form a rope effect. It has been bent over one third along its length, one end has snapped whilst the other end has been chopped. Analysis carried out at the British Museum by Antony Simpson shows that the object is 82-87% gold, 12-14% silver with the remainder being copper.
Created on: Tuesday 7th November 2006
Last updated: Tuesday 3rd June 2014
Spatial data recorded.

Record ID: LEIC-D8A297
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval?? copper alloy object, 37mm wide, 31mm high and 2mm thick. The object is in fair condition with a reddish patina and weighs 3.76 grams. The object is crossed shaped and has worn tapering edges. It has a sub rectangular centre where each arm merges and this has faint diagonal incised lines on one side. The object may be a very worn fragment of harness pendant??
Created on: Friday 17th November 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-C547B3
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Published
Silver object, 40mm long and 5mm in diameter. The object is in fair condition and weighs 1.27g. The object consists of a hollow tube which has a wide collar decorated with an incised line and ridge at each end. protruding from this is a rectangular-sectioned wire, 3mm wide and 1mm thick, that has been twisted three times before carrying on flat and straight. Probably post-medieval, and likely to be 18th or 19th century.
Created on: Wednesday 21st February 2007
Last updated: Tuesday 22nd July 2014
Spatial data recorded.

Record ID: LEIC-43F8B5
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Published
unidentified copper alloy object, 16mm long, 13mm wdie and 8mm thick. The object is in fair condition with a green patina and weighs 4.43grams. The object is triangular in form and oval in section with bulging sides. It has two circular protrusions, one at each side of the long edge, which appear to be the base of a loop?
Created on: Tuesday 27th February 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-F051E1
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Unknown copper alloy object, 37mm long, 33mm wide and 5mm thick. The object is good condition with a dark grey/brown patina and weighs 21.63grams. The object is sub triangular in form and appears incomplete. It has one straight edge which is angled at 45o and has snapped off. In the centre of this side is a circular hole, 6mm in diameter. At this point the object is at its thickest and it tapers gently in width to the edge, which slightly curves to a point and is 2mm thick. The patina suggests a medieval date, but its function is unknown.
Created on: Wednesday 8th March 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.