Record ID: LEIC-5141D2
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
Medieval? copper alloy (possible harness pendant suspension) mount, 29mm long, 20mm wide and 1mm thick. The object is in fair condition and weighs 3.08grams. The mount is in the form of a maltese style cross which is missing one arm. It has two circular holes, each one in the centre of an arm. It has traces of thick gilding over its surface. It is perhaps part of a harness mount (compare LEIC-7FFAC3) or a decorative fitting.
Created on: Thursday 18th November 2010
Last updated: Tuesday 19th January 2021
Spatial data recorded.

Record ID: LEIC-4F9133
Object type: HARNESS MOUNT
Broad period: IRON AGE
County: Leicestershire
Workflow stage: Awaiting validation
A late Iron Age to early Roman copper-alloy incomplete terret ring with a rectangular suspension loop. It is decorated with three trefoil protrusions, and has a rectangluar section. Recorded from an illustration on an identification record from 1987.
Created on: Wednesday 23rd February 2011
Last updated: Monday 11th May 2020
Spatial data recorded.

Record ID: LEIC-D62C33
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Derbyshire
Workflow stage: Awaiting validation
Medieval copper alloy shield shaped harness mount. The object is decorated with the Plantagenet Royal emblem of three lions with the background picked out in red enamel.
Created on: Tuesday 19th April 2011
Last updated: Tuesday 10th November 2020
Spatial data recorded.

Record ID: LEIC-4BF303
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval or late medieval copper alloy cast mount. The rough and matt texture of the material suggests medieval or later date. The object is flat, cc. 50mm in length, and has a large rectangular eye in the centre section, with two smaller circular openings at either side. This suggests it was probably a part of some sort of fitting. The terminal has a narrow, semicircular ending with a small circular eye, below which the object is decorated in two lines, pointing out of the surface. The object appears to be broken at the other terminal. It is curved, possibly by damage, and seems to h…
Created on: Tuesday 31st May 2011
Last updated: Tuesday 30th March 2021
Spatial data recorded. This findspot is known as 'Goadby Marwood', grid reference and parish protected.

Record ID: LEIC-42AF16
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper-alloy shield-shaped harness mount, 17mm long, 13mm wide and 2.5mm thick. The object is in a fair condition with a brownish patina and weighs 3.70g. The object is shield-shaped and is decorated with three lions passant or, a label azure' (three gold lions on an enamelled red background). Over this is a 'blue label', a solid line of blue with three right angled linear projections pointing downwards. The reverse of the pendant is plain except for a centrally placed circular sectioned shaft, 7mm long and 4mm in diameter. The heraldry has been identified on a similar …
Created on: Tuesday 29th August 2006
Last updated: Monday 25th March 2019
Spatial data recorded.

Record ID: LEIC-7792E5
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy harness pendant, 40mm long, 30mm wide and 6mm thick. The object is in fair conditioon with a green/red patina and weighs 8.16grams. The object consists of a circular plate which has scalloped edges and has a raised circular hollow boss, 10mm in diameter, in its centre. The surface is divided into 15 sections, corresponding to the scalloping which are alternately decorated with a series of curved incised lines. Because of the odd number the upper part of the pendant has two areas of these curved lines which sit underneath the suspension loop. This consists of two …
Created on: Wednesday 24th January 2007
Last updated: Tuesday 3rd October 2017
Spatial data recorded.

Record ID: LEIC-3220C7
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy and enamel shield shaped harness pendant, 32.8mm long, 25.5mm wide and 3mm thick. The pendant is in fair condition with a green patina and a weight of 11.87 grams. The surface is quite worn with most of the red enamel missing, but the outline of plantagenet lions can just be seen. The reverse has traces of gilding and a central circular sectioned tapering shaft 8mm long.
Created on: Wednesday 15th February 2006
Last updated: Wednesday 4th October 2017
No spatial data available.

Record ID: LEIC-20B431
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
Medieval copper alloy and enamel horse harness pendant, 26mm long, 20mm wide and 2mm thick. The object is in poor condition having damaged edges, it has a brown patina and weighs 4.22grams. The pendant is shield shaped and depicts the outline of the three plantagenet lions with patches of red enamel in the surrounding field. It has a circular fixing rivet in the centre of its reverse and its edges are damaged, especially the lower part.
Created on: Friday 28th April 2006
Last updated: Wednesday 14th February 2018
Spatial data recorded.

Record ID: LEIC-AC0440
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy and gilt pendant suspension mount, 34mm wide, 27mm high and weighing 6.99g. The object consists of a rectangular plate with a protrusion in the centre of its lower edge. The protrusion is formed from a rectangular piece of metal, 8x10mm, with a slit in its centre which has been folded over to form two loops. The object is decorated with the recessed image of a bird facing left, this is would have originally contained coloured enamel. It can be described as 'Or a bird close azure beaked and legged gules'. The background is decorated with incised cross hatching whi…
Created on: Tuesday 6th July 2004
Last updated: Friday 22nd September 2017
No spatial data available.

Record ID: LEIC-D79D83
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy pendant suspension fitting, 18mm wide and 17mm high. The object has a brown patina and is in fair condition. It has a T shape and is a fitting to hold a suspended harness pendant. The upper bar has a triangular section with a ridge running down the centre of the front. Its reverse has two circular rivets intact. Protruding from the lower centre of this are two offset circular protrusions with central holes which would have held the pendant.
Created on: Monday 13th June 2005
Last updated: Thursday 28th September 2017
Spatial data recorded.

Record ID: LEIC-A82732
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
Medieval copper alloy pendant hanger, 42mm wide and 19mm high. The object has a brownish patina and is in good condition. It is T shaped with wide arms with trefoil terminals. There is a rivet hole in the centre of each terminal. The main part of the bar has a triangular section with the ridge running across the centre of its front surface. The lower protrusion has the same section and terminates in two protruding circles with central holes which would have held the suspended pendant.
Created on: Thursday 23rd June 2005
Last updated: Friday 15th September 2017
Spatial data recorded.

Record ID: LEIC-002782
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy suspension mount for a harness pendant, 9mm long, 11mm wide and 6mm thick. the object weighs 1.85 grams and has a brown patina. It consists of a diamond shaped sheet with a central, intact rivet. Suspended from this are two circles with central holes set at 90o which forms the hinge that would hold the pendant.
Created on: Tuesday 22nd March 2005
Last updated: Friday 16th January 2015
No spatial data available.

Record ID: LEIC-2B3C83
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieaval copper alloy harness pendant mount, 23mm long, 21mm wide and 3mm thick. The object is in fair condition and weighs 3.92grams. The object is rectangular in section and form and has a central circular hole. Its lower edge has traces of two rectangular hinge fittings and it h as two intact circular copper alloy rivets in its upper corners. The surface is divided into four quarters by a beaded cross; each quarter contains a trefoil motif formed of three leaves emerging from an inverted triangular base. there are tiny traces of gilding all over the objects surface, the reverse is…
Created on: Thursday 3rd November 2011
Last updated: Friday 23rd April 2021
Spatial data recorded.

Record ID: LEIC-931456
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy harness pendant fitting, 15mm long, 16mm wide and 5mm thick. The object is in fair condition and weighs 4.53grams. The object is T shaped in form and sub triangular in section. It consists of an upper rectangular shaped plate which has a convex surface and has two fixing prongs emerging from its reverse. Below this is a rectangular projection which has a triangular sectioned surface and has broken off.
Created on: Tuesday 8th November 2011
Last updated: Monday 11th January 2021
Spatial data recorded.

Record ID: LEIC-942885
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
Medieval copper alloy and gold harness mount fragment, 24mm long, 13mm wide and 10mm thick. The object is in fair condition and weighs 3.21 grams. The object consists of a slightly domed gilded circular plate attached to a folded sheet with a cut away section forming a hinge fitting. Part of the circular bar can be seen inside the folds. The plate has a circular sectioned bar protruding from its underside. The object would have held a supsended harness mount.
Created on: Thursday 28th October 2010
Last updated: Monday 26th February 2018
Spatial data recorded.

Record ID: LEIC-9EB6F8
Object type: HARNESS MOUNT
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Anglo-Scandinavian harness mount or pendant, 27mm long 24mm wide and 2mm thick with a weight of 4.54grams. The object is incomplete and consists of a broken rectangular suspension loop, below which is a rounded oval shaped protrusion suggesting an animal head. This sits in the centre of a triangular shaped fragment, suggesting the object may be lozenge shaped when complete. At either side of this 'head' are sub-circular holes, which are only completed by very thin strips of metal which join a central T shaped lower section, sitting below the 'head'. The object has a similar form t…
Created on: Monday 18th May 2015
Last updated: Monday 18th May 2015
Spatial data recorded.

Record ID: LEIC-C7C40A
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy harness pendant suspension mount, 50mm long, 33mm wide and 3mm thick with a weight of 6.33grams. The object consists of cross shaped frame with a slightly rounded upper surface. Three arms terminate in a rounded projection sitting above a circular fixing hole (one is missingthe projection) . The fourth arm is split to form two offset suspension loops with which to suspend the pendant.
Created on: Monday 1st June 2015
Last updated: Friday 20th May 2022
Spatial data recorded.

Record ID: LEIC-94D2D7
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval copper alloy horse harness pendant suspenion plate, 22mm long, 16mm wide and 3mm thick with a weight of 3.34grams. The object consists of a now sub-circular plate which has two thin strips of copper alloy protruding from one side. These have been folded over and fixed behind the plate, forming a hinge like suspension fitting for a pendant to hang from. The surface has pellet like decoration forming at least two circles and this has been picked out in gilding. The reverse of the object has a circular cross-sectioned fixing prong near its 'upper' edge. The object probably dates…
Created on: Monday 28th September 2015
Last updated: Monday 25th September 2017
Spatial data recorded.

Record ID: LEIC-800B15
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval copper alloy harness mount, 26mm long, 24mm wide, 2mm thick, and weighing 7.32grams. The object appears to be rectangular in form and section and has a scalloped edge. It has been folded back on itself, but appears intact. It has at least seven small circular holes arranged around a larger central hole. It appears to have foliate style incised decoration, at least in each corner, on one face. In the centre of one edge there are two transverse suspension loops, set close together which, along with a corresponding one on another component, would have formed a hinge like suspens…
Created on: Tuesday 15th March 2016
Last updated: Friday 20th May 2022
Spatial data recorded.

Record ID: LEIC-803427
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval copper alloy plate, 23mm long, 18mm wide, 4mm thick, and weighing 2.43grams. The object consists of a now rectangular damaged strip or plate with a centrally positioned circular hole. Above the hole is a rectangular projection with a rectangular cut out which has been folded over to form a 'hinge'. The object is heavily gilded on one surface. It is probably part of a decorative fitting or edging, perhaps harness or book related.
Created on: Tuesday 15th March 2016
Last updated: Wednesday 4th October 2017
Spatial data recorded.