Record ID: LEIC-D19605
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published
Roman copper alloy brooch of Colchester derivative Polden Hill (Mackreth Group 4, flat wing ends), Mackreth 2011, 4.a-4.b, 4c, Plate 46. The brooch appears to be plain and is missing its spring and catchplate, despite damage to its wings and some pitting, has a good surface patina. The wings are short and their edges have worn away. The bow is plain and has a semi-circular section and tapers to a point.It is 39mm long, 16mm wide and 12mm thick. The brooch is in fair condition with a green patina and weighs 7.14grams.
Created on: Monday 11th June 2007
Last updated: Tuesday 17th January 2017
Spatial data recorded.

Record ID: LEIC-BF1C07
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
Post medieval copper alloy dress hook, 24mm long, 16mm wide and 2mm thick. The object is in fair condition with a green patina and weighs 1.86grams. The object is sub-circular in form with a floriate? pattern over its surface. The hook is sub triangular, with rounded protrusions near its upper edge and is missing its end. Class E, Type 3. B Read, 2008, Pg. 96, No. 355.
Created on: Thursday 13th November 2008
Last updated: Friday 29th October 2021
Spatial data recorded.

Record ID: LEIC-BF2885
Object type: FIGURINE
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
Post medieval copper alloy figurine, 85mm long, 37mm wide and 16mm thick. The object is in fair condition with a green patina and weighs 81.77grams. The figure is in the form of a 'dandy' with a tail coat and tight breeches.
Created on: Thursday 13th November 2008
Last updated: Friday 29th October 2021
Spatial data recorded.

Record ID: LEIC-BFDED1
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published
Roman copper alloy As, very corroded.
Created on: Thursday 13th November 2008
Last updated: Tuesday 28th August 2012
Spatial data recorded.

Record ID: LEIC-C06447
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
Post Medieval copper alloy buckle fragment, 21mm long, 18mm wide and 2mm thick. The buckle is in fair condition with a green patina and weighs 3.01grams. It consist of one half of a double looped buckle with integral pin bar. It has a sub triangular decorative terminal protruding from its end.
Created on: Thursday 13th November 2008
Last updated: Friday 29th October 2021
Spatial data recorded.

Record ID: LEIC-C08816
Object type: BROOCH
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Published
Medieval copper alloy ring brooch, 21mm in diameter and 2mm thick. The object is in good condition with a brown patina and weighs 2.43grams. The brooch is decorated on its face with a series of transverse notches of varying length. It has a wrap around pin which tapers in width and its reverse is plain.
Created on: Thursday 13th November 2008
Last updated: Friday 29th October 2021
Spatial data recorded.

Record ID: LEIC-C0BD97
Object type: BELL
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
post Medieval copper alloy crotal bell, 27mm in diameter and 32mm long. The object is in fair condition with a green patina and weighs 25.4grams. The bell is complete and has a rectangular suspension fitting. It has a raised band around its centre and is plain.
Created on: Thursday 13th November 2008
Last updated: Friday 29th October 2021
Spatial data recorded.

Record ID: LEIC-C106A1
Object type: HARNESS FITTING
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
Post Medieval copper alloy harness fitting, 30mm long and 25mm wide. The object is in fair condition with a green patina and weighs 5.46grams. The object consists of a circular terminal which is decorated with a central raised dot and four radiating raised lines. Behind this is a bent hook. Below the circle is a semi circular projection which is plain on both sides and worn.
Created on: Thursday 13th November 2008
Last updated: Friday 29th October 2021
Spatial data recorded.

Record ID: LEIC-C139D2
Object type: MEDALLION
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
Post Medieval copper alloy medallion or token, 23mm in diameter and 3mm thick. The object is in poor condition with a green patina and weighs 3.48grams. It has no remaining edges and is corroded, but shows on one side a man on horseback with a bust of a man on the other.
Created on: Thursday 13th November 2008
Last updated: Friday 29th October 2021
Spatial data recorded.

Record ID: LEIC-C15E63
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Published
Medieval copper alloy harness pendant suspension mount, 32mm long, 27mm wide and 5mm thick. The object is in poor condition with a brown patina and weighs 8.4grams. The object is 'cross' shaped and has a sub rectangular section. In its centre it is decorated with two sets of two raised lines which form a diagonally placed cross. One of the short arms is divided at its end and is folded over (and riveted?) to form a double loop. This forms a hinge or perhaps holds a suspension bar. The object is worn and incomplete.
Created on: Thursday 13th November 2008
Last updated: Tuesday 19th January 2021
Spatial data recorded.

Record ID: LEIC-C19EB5
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
Post Medieval copper alloy seal matrix? 20mm long, 13mm wide and 7mm thick. The object is in fair condition with a green patina and weighs ?grams. The object consists of a circular loop with a circular section, which widens towards the base. The object terminates at one end with a sub triangular knop and the other has an oval disc attached by a small triangular shaft. The surface of the disc is worn but it may have held some sort of seal?
Created on: Thursday 13th November 2008
Last updated: Tuesday 26th October 2021
Spatial data recorded.

Record ID: LEIC-C1D375
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Published
Medieval copper alloy single looped buckle, 20mm long, 14.5mm wide and 4mm thick. The object is in fair condition with a green patina and weighs 1.25grams. The object consists of a sub circular loop projecting from a straight pin bar. The buckle has an angled decorative pin rest consisting of a rectangular plate with two linear recesses flanking a ridge.
Created on: Thursday 13th November 2008
Last updated: Tuesday 21st August 2018
Spatial data recorded.

Record ID: LEIC-C1F374
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Published
Medieval copper-alloy buckle fragment, 25mm long, 24mm wide and 5mm thick. The object is in fair condition with a green patina and weighs 4.89g. The object consists of a sub-rectangular plate, which has a circular hole and transverse ridge at one end and a circular-sectioned fragment of frame protruding at right angles at the other. The plate has a rectangular recess which holds a fragment of hinged tapering copper-alloy pin rotating on a separate copper-alloy bar. This buckle is of T-shaped form. Compare similar buckles at NLM-369C73, SUR-C74125, SUR-1B596F, NMS-039367, DENO-4B97A…
Created on: Thursday 13th November 2008
Last updated: Friday 8th November 2019
Spatial data recorded.

Record ID: LEIC-C24674
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
Post Medieval copper alloy ring bezel, 22mm long, 14mm wide and 1.5mm thick. The object is in fair condition and weighs 4.01grams. The object consists of an oval bezel with tapering shafts projecting from each narrow edge. The bezel is decorated with a raised pictogram based on a circle and a series of overlapping elipses, picked out in gilding.
Created on: Thursday 13th November 2008
Last updated: Monday 28th November 2016
Spatial data recorded.

Record ID: LEIC-C25B96
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
Post Medieval copper alloy tombac button, 14mm in diasmeter and 6mm thick. The object is in fair condition with a grey patina and weighs 2.49grams. The button is domed and hollow and is decorated with an incised pattern of an open triangle with linear nothches in each corner.
Created on: Thursday 13th November 2008
Last updated: Tuesday 26th October 2021
Spatial data recorded.

Record ID: LEIC-C3C586
Object type: PURSE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Published
Late Medieval/early Post Medieval copper alloy purse bar, 85mm long, 6mm wide and 5mm thick. The object is in fair condition with a brown patina. It consists of a long bar which has an L shaped section and is bent. It has two semi-circular notches cut out of one side. The bar is decorated all over with parallel sets of cross hatched lines.
Created on: Thursday 13th November 2008
Last updated: Wednesday 2nd May 2012
Spatial data recorded.

Record ID: LEIC-C41622
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Published
Early medieval copper alloy, gold and enamel brooch, 25.5mm in diameter and 5.5mm thick. The brooch is in fair condition with a green patina and weighs 5.39grams. The brooch is circular and has a series of six circular protrusions around its edge, these may have held enamel but are now hollow. The whole of the surface is filled with enamel consisiting of a pattern of three small semi-circles of different colours, red and white can be seen, the third is missing. These are surrounded by crescents of a dark blue. The fourth quarter has a large crescent of dark blue. The rest of the field…
Created on: Thursday 13th November 2008
Last updated: Tuesday 28th April 2015
Spatial data recorded.

Record ID: LEIC-C44CB3
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
Post medieval copper alloy knife handle, 20mm long, 12mm wide and 5.5mm thick. The object is in fair condition with a green patina and weighs 3.67grams. It consists of a sub rectangular plate which has a circular hole in the centre of its upper edge. Flanking this are two possible rivet holes or depressions? below the handle traces of the blade are still present with clear iron staining.
Created on: Thursday 13th November 2008
Last updated: Tuesday 26th October 2021
Spatial data recorded.

Record ID: LEIC-C4FA03
Object type: SCABBARD
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Published
Medieval or later copper alloy dagger chape, 37mm long, 20mm wide and 14mm thick. The object is in good condition with a green patina. The object consists of a sheet turned into a cone shape and fixed with a single rivet. It has three sets of parallel incised lines running down its length.
Created on: Thursday 13th November 2008
Last updated: Tuesday 19th June 2018
Spatial data recorded.

Record ID: LEIC-C51EF7
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
Post Medieval copper alloy dress fastener, 35mm long, 25mm wide and 1.5mm thick. The object is in fair condition with a brown patina and weighs 4.49grams. It consists of a sub rectangular plate with three slightly protruding circular fixing holes. The surface is decorated with incised decoration which is worn. The reverse is plain.
Created on: Thursday 13th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.