Record ID: LEIC-59B28B
Object type: BUCKLE
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published
Late Roman copper alloy buckle, 27mm in length, 21mm wide and 4mm thick with a weight of 7.37g. The object is sub rectangular in form and cross section. It consists of a D shaped buckle frame which is decorated with two outwards facing horses heads. These are C shaped with curved necks, sub triangular heads and small rounded projections for ears. Below the ears are dot in circle stamped eyes. The mane is picked out with a double row of circular stamps running down the edge and a single row continues across the body, just above the ridge where the projection joins the frame. The fra…
Created on: Tuesday 16th April 2019
Last updated: Wednesday 1st April 2020
Spatial data recorded.

Record ID: LEIC-32B72F
Object type: HARNESS FITTING
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Early Roman copper alloy skirted terret, 66mm in length, 41mm wide, 28mm thick (at skirt) with a weight of 38.90grams. The terret has a circular cross sectioned, circular loop and emerging from the hoop is the flaring skirt, which has a now damaged, curved upper edge and is slightly folded along its centre at an angle of 45 degrees to give an inverted V-shaped profile. In the centre, extending from the base of the skirt and echoing its form is an integrally cast semi-circular, circular cross sectioned, loop. similar examples can be found here, GLO-32C6A8 BM-952D08 CAM-632…
Created on: Tuesday 2nd April 2019
Last updated: Monday 8th April 2019
Spatial data recorded.

Record ID: LEIC-6CB7A9
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post Medieval copper alloy pot leg, 53mmlong, 27mm wide and 17mm thick with a weight of 91.57g. The object is rectangular in form and triangular in cross section. Its upper surface has a trilobed cross section, forming a vertical central ridge, which runs down to a horizontal rounded collar about half way down its present length. Below this the three sections widen out to form a rounded 'foot' .
Created on: Monday 29th October 2018
Last updated: Monday 29th October 2018
Spatial data recorded. This findspot is known as 'Monks Kirby', grid reference and parish protected.

Record ID: LEIC-B9B242
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Postmedieval silver groat of Elizabeth I, 1558-1603.
Created on: Friday 14th September 2018
Last updated: Tuesday 18th September 2018
Spatial data recorded. This findspot is known as 'Warwickshire', grid reference and parish protected.

Record ID: LEIC-936C76
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy seal matrix, 20mm long, 15mm in diamater with a weight of 5.16g The matrix has a very worn hexagonal cross sectioned short shaft with a now incomplete suspension loop and roudned collar at its apex. Thsi widens out to house a circular matrix. This is also worn and appears to show a goose or other water fowl with large feet. The inscription is worn and missing in places.
Created on: Thursday 7th June 2018
Last updated: Friday 8th June 2018
Spatial data recorded. This findspot is known as 'Warwickshire', grid reference and parish protected.

Record ID: LEIC-E15BE9
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Early medieval silver penny of Edward the Confessor, Canterbury mint, moneyer CILDEPINE is probably Caldwine or Goldwine or a previously unknown Cildwine? 1062-65AD Spink 830. BMC xiiii
Created on: Tuesday 16th January 2018
Last updated: Thursday 25th January 2018
Spatial data recorded.

Record ID: LEIC-2889FA
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval gold half angel of Richard III. The coin has been straightened. When found its edge had three folds, creating a triangular shape.
Created on: Thursday 14th December 2017
Last updated: Monday 18th December 2017
Spatial data recorded.

Record ID: LEIC-435E8C
Object type: STRAP END
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy strap end, Length: 35 mm, width: 10 mm, thickness: 2 mm, weight: 2.1 grams. The object is a two part strap end and has a rectnagular from and cross section. It has tapering long edges which narrow to a rounded collar sitting above an acorn like sub spherical terminal. There is a single centrally placed rivet hole at the top and a rivet at the bottom of the plate and one surface is missing. There is no obvious decoration on the plate which is present. The object matches e.g. 607, p.131 in Egan and Prichard, Dress Accessories, which they have dated to 1350-1450.
Created on: Tuesday 21st November 2017
Last updated: Monday 18th December 2017
Spatial data recorded. This findspot is known as 'Warwickshire', grid reference and parish protected.

Record ID: LEIC-42A991
Object type: SPINDLE WHORL
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Early medieval lead alloy spindle whorl, Diameter: 21 mm, width 10mm, weight: 30.99 grams. The whorl is circular in form and rectangular in cross section with a central circular hole, 8mm in diameter. The object is plain except for a slight rounded indentation running across one face. The form fits Walton Rogers class B, which she dates to 900-1100AD.
Created on: Tuesday 21st November 2017
Last updated: Thursday 23rd November 2017
Spatial data recorded. This findspot is known as 'Warwickshire', grid reference and parish protected.

Record ID: LEIC-41F3B9
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post medieval silver rose farthing of Charles I, pierced and clipped, 1625-1649
Created on: Tuesday 21st November 2017
Last updated: Wednesday 22nd November 2017
Spatial data recorded. This findspot is known as 'Warwickshire', grid reference and parish protected.

Record ID: LEIC-41A3B5
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver farthing of Edward I, Berwick mint. Withers type 1 (N 1085/1)
Created on: Tuesday 21st November 2017
Last updated: Thursday 30th November 2017
Spatial data recorded. This findspot is known as 'Warwickshire', grid reference and parish protected.

Record ID: LEIC-5C135B
Object type: THUMB NAIL SCRAPER
Broad period: NEOLITHIC
County: Warwickshire
Workflow stage: Awaiting validation
Late Neolithic to early Bronze age flint thumbnail scraper, 2700-1600 BC. The scraper has a dark brown patina, with a semi-circular form and rectangular cross section. It has short, stepped abrupt re-touch around its curved edge, with a patch of cortex on one side. Length: 28 mm, width: 21 mm, thickness: 7 mm, weight: 6.20 g.
Created on: Tuesday 17th October 2017
Last updated: Thursday 19th October 2017
Spatial data recorded.

Record ID: LEIC-5C0484
Object type: FLAKE
Broad period: NEOLITHIC
County: Warwickshire
Workflow stage: Awaiting validation
Two early Neolithic blade like flakes, one incomplete, 4000-3500BC. Both have a dark brown patina and no signs of any re-touch. 1) Length: 52 mm, width: 16 mm, thickness: 6 mm, weight: 6.74 g This has three clear linear removals on its dorsal surface. 2) Length: 27 mm, width: 14 mm, thickness: 4 mm, weight: 1.68 g this is incomplete and has clear bulb of percussion on its ventral surface.
Created on: Tuesday 17th October 2017
Last updated: Thursday 19th October 2017
Spatial data recorded.

Record ID: LEIC-5BF355
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy seal matrix, 1200-1400. Hexagonal cross sectioned tapering shaft which terminates in an integral suspension loop. The shaft flares out to accommodate a flat circular matrix surface. This is decorated with a Fleur motif and the inscription reads NRIVESV* ? Length: 20 mm, diameter: 17 mm, weight: 6.50 g.
Created on: Tuesday 17th October 2017
Last updated: Thursday 19th October 2017
Spatial data recorded.

Record ID: LEIC-5BDCC9
Object type: NAIL
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
6 Iron nails, probably all Roman. First image shows various nails all found together in waterlogged riverside field. Those on left show standard Roman forms. Second image unusually shaped iron object possibly a nail like fitting.
Created on: Tuesday 17th October 2017
Last updated: Thursday 19th October 2017
Spatial data recorded.

Record ID: LEIC-5B9345
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post medieval silver halfpenny of Elizabeth I, Tower mint, 1594-6
Created on: Tuesday 17th October 2017
Last updated: Thursday 19th October 2017
Spatial data recorded.

Record ID: LEIC-5B83B6
Object type: SPEAR
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post medieval iron spearhead or pike blade? Length: 1200 mm, width: 29 mm, thickness: 25 mm, weight: 178.00 g The object has a triangular form and a lozenge shaped sub rectangular cross section, which becomes circular near its base. It tapers in width slightly to a point and has a prominent ridge running down the centre of each blade. At its base there is a circular opening which has a small circular hole in one side just above its damaged edge, so it appears intact in length. As the object is iron the most obvious date would be post medieval and it may be a componenet of sever…
Created on: Tuesday 17th October 2017
Last updated: Wednesday 25th October 2017
Spatial data recorded.

Record ID: LEIC-5B67D6
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy seal matrix, 1200-1400AD. The object is incomplete and has an hexagonal cross section shaft, missing its upper half, which widens to accommodate a circular matrix at its base. This shows a central cross with long shaft terminating in a chevron at its base. Above this, across the centre, are the letters IHC (for Christ) with a scroll emerging from either side of the shaft above this. The inscription reads ESTAMORMEVS Length: 11 mm, diameter: 19 mm, weight: 5.56 grams.
Created on: Tuesday 17th October 2017
Last updated: Friday 20th October 2017
Spatial data recorded.

Record ID: LEIC-7A10AA
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post medieval silver penny of James I, rose/thistle type, 1604-19, Spink 2672
Created on: Tuesday 12th September 2017
Last updated: Tuesday 26th September 2017
Spatial data recorded. This findspot is known as 'Warwickshire', grid reference and parish protected.

Record ID: LEIC-AD0E08
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle, Length: 23 mm, width: 17 mm, thickness: 3 mm, weight: 13.79 grams. The buckle has a D shaped form with flared flat loop which has an integral raised double collar at its centre. It has a slightly recessed pin bar and a small wire loop/pin fragment attached.
Created on: Tuesday 16th May 2017
Last updated: Friday 31st August 2018
Spatial data recorded.

Record ID: LEIC-ACD805
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published
An incomplete silver Roman radiate of Philip I (AD 244-249), dating to the period AD 244 (Reece period 12). [P M T]R P II CO[S P P] reverse type probably depicting Philip seated left on curule chair holding globe and sceptre. Mint of Rome. As RIC IV.3, p. 68, no. 2b.
Created on: Tuesday 16th May 2017
Last updated: Monday 3rd July 2017
Spatial data recorded.

Record ID: LEIC-54680A
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver penny of Henry VI, York mint, cross and pellet issue, 1454-60.
Created on: Tuesday 28th February 2017
Last updated: Wednesday 1st March 2017
Spatial data recorded. This findspot is known as 'Warwickshire', grid reference and parish protected.

Record ID: LEIC-545585
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver Edwardian penny, London mint, (class 10-11), 1300-1314
Created on: Tuesday 28th February 2017
Last updated: Wednesday 1st March 2017
Spatial data recorded. This findspot is known as 'Warwickshire', grid reference and parish protected.

Record ID: LEIC-5439CD
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver Edwardian penny, London mint, (class 10-11), 1300-1314
Created on: Tuesday 28th February 2017
Last updated: Wednesday 1st March 2017
Spatial data recorded. This findspot is known as 'Warwickshire', grid reference and parish protected.

Record ID: LEIC-540684
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver 'tealby' cut farthing of Henry II, Norwich or Northampton mint, 1154-89, North 952-61.
Created on: Tuesday 28th February 2017
Last updated: Wednesday 1st March 2017
Spatial data recorded. This findspot is known as 'Warwickshire', grid reference and parish protected.

Record ID: LEIC-9AC79B
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post medieval silver penny of James I, 1603-25.
Created on: Tuesday 7th February 2017
Last updated: Tuesday 14th February 2017
Spatial data recorded.

Record ID: LEIC-9AB6B6
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post medieval silver halfgroat of James I, 1621-3.
Created on: Tuesday 7th February 2017
Last updated: Tuesday 14th February 2017
Spatial data recorded.

Record ID: LEIC-9AA069
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver penny of Edward I, Bristol mint, class 1-9, 1279-1300.
Created on: Tuesday 7th February 2017
Last updated: Tuesday 14th February 2017
Spatial data recorded.

Record ID: LEIC-9A891B
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post medieval silver threepence of Charles I. The coin is of a type known as Ormonde siege money as it was issued by James, Marquis of Ormond, dating to 1643-44.
Created on: Tuesday 7th February 2017
Last updated: Tuesday 14th February 2017
Spatial data recorded.

Record ID: LEIC-9A601D
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post medieval silver shilling of Charles I, probably Aberystwyth furnace mint, 1648-9.
Created on: Tuesday 7th February 2017
Last updated: Tuesday 14th February 2017
Spatial data recorded.

Record ID: LEIC-6B2475
Object type: WEIGHT
Broad period: UNKNOWN
County: Warwickshire
Workflow stage: Awaiting validation
Undated lead alloy weight or gaming piece, diameter 44mm, 22mm thick and weighing 238grams. The object is circular in form and semi-circular in cross section. Its upper domed surface has a series of stamped or incised motifs in the form of a loop with crossed over ends (fish shaped?) and one large chevron shaped incision to one side.
Created on: Tuesday 6th December 2016
Last updated: Thursday 5th January 2017
Spatial data recorded.

Record ID: LEIC-B34C49
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post medieval silver half groat of Elizabeth I, London mint, 1590-2
Created on: Thursday 3rd November 2016
Last updated: Thursday 17th November 2016
Spatial data recorded.

Record ID: LEIC-B32B2E
Object type: COIN
Broad period: IRON AGE
County: Warwickshire
Workflow stage: Awaiting validation
Iron age copper alloy stater core, North Eastern incribed, BM3303, VEP CORF.
Created on: Thursday 3rd November 2016
Last updated: Tuesday 29th November 2016
Spatial data recorded.

Record ID: LEIC-B315EC
Object type: MOUNT
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy mount, length: 28 mm, width: 11 mm, thickness: 1 mm, weight: 1.7 g. The object is rectangular in form and cross section and is incomplete. It consists of a rectangular central section, which has a slightly rounded upper surface and is decorated with transverse ridges. To one side of this is a trilobed projection which houses a cental circular rivet. Either side of this, running from the rectangular section, are incised radiating lines. The far end of the object has an incomplete loop fitting. The whole of the surface is heavily gilded. The object is possibly …
Created on: Thursday 3rd November 2016
Last updated: Thursday 17th November 2016
Spatial data recorded.

Record ID: LEIC-B2A2B1
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy hinge headed enamelled brooch, length 32 mm, width 17 mm, thickness 4.0 mm, weight: 7.6 g. The brooch is formed of a circular flat central plate (very worn) which has a central pellet of red enamel in a circular border, flanked by six triangular motifs. This plate sits slightly proud of the remainder of the brooch which has a backwards curving triangular projection which is decorated with two rectangular red enamel cells with a blue triangular one below. This terminates in very short wings containing a hinged pin, now missing. The opposite end has a triangular (p…
Created on: Thursday 3rd November 2016
Last updated: Tuesday 8th August 2017
Spatial data recorded.

Record ID: LEIC-A1211A
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy casket key, 36mm in length, 12mm wide and 5mm thick with a weight of 6.69grams. The key has an integral circular loop and a circular cross sectioned hollow shaft. The bit is rectangular and has two small rectangular recesses one at the top and one at the bottom centrally placed.
Created on: Wednesday 2nd November 2016
Last updated: Tuesday 8th August 2017
Spatial data recorded.

Record ID: LEIC-085C18
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post medieval silver groat of Henry VIII which has been folded into a tube, Second coinage, profile issue, 1526-44 .
Created on: Wednesday 26th October 2016
Last updated: Saturday 18th February 2017
Spatial data recorded.

Record ID: LEIC-081C55
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy minim, Reverse type probably VICTORIAE LAETAE PRINC PERP two Victories with shield, 318-24AD.
Created on: Wednesday 26th October 2016
Last updated: Thursday 10th November 2016
Spatial data recorded.

Record ID: LEIC-07CCDB
Object type: PURSE
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post Medieval copper alloy purse frame fragment, 42 mm long, 14mm wide and thick and weighing 18.09 grams. The object consists of a central solid rectangle which has a circular cross sectioned pin running through it from top to bottom. The upper side (as shown) termiantes in a sub spherical projection. To the right of the rectangle is a short circular cross sectioned shaft. To the left is a wider, short, circular cross sectioned shaft which explands to form a spherical knop and has a recess mid way that houses a rectangular cross sectioned 'plate' now incomplete. For a similar,…
Created on: Wednesday 26th October 2016
Last updated: Thursday 10th November 2016
Spatial data recorded.

Record ID: LEIC-07A069
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle plate, 30mm long, 26mm wide and 4mm thick with a weight of 9.36grams. The plate is rectangular in form and cross section and is formed of two plates, one larger than the other, which are joined by two short strips. These have been folded over to form a hinge like attachment and the two plates have been joined by a rivet in each far corner. The larger plate is decoarted with a slightly inset, raised solid border which contains an image in slight relief. This shows a backwards facing beast, with an S shaped body and for legs, to the left with a male figure, …
Created on: Wednesday 26th October 2016
Last updated: Thursday 10th November 2016
Spatial data recorded.

Record ID: LEIC-726F60
Object type: VESSEL
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Late Medieval copper alloy vessel spout in the form of a dog, 60mm long and 41mm high and c. 13.5mm thick. The object is circular in cross section and is hollow. At one end it forms an angular dogs head. This has an open mouth from which the circular spout protrudes. The dog's head is formed of moulded decoration, and has rounded ears, a squared brow and eyes. At the opposite end the spout curves through ninety degrees downwards and expands into a long open neck where it would have attached to the vessel. Thanks to T Gilmore for the improved image and measurements.
Created on: Wednesday 19th October 2016
Last updated: Tuesday 22nd November 2016
Spatial data recorded.

Record ID: LEIC-CC8A32
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
Post Medieval silver gilt dress hook, 28mm long, 19mm wide and 7mm thick with a weight of 5.23grams. The object is complete and consists of a sexfoil shaped plate. A circular sectioned shaft is soldered onto one edge of the reverse of the plate and this is folded back on itself and terminates in a sharp point. This sits below a rectangular shaped and cross sectioned plate, also soldered on, across the upper portion of the object. The sexfoil plate consists of six plain rounded lobes, between each is a rounded recess which has three small semi-circular recesses. In the centre of …
Created on: Monday 18th July 2016
Last updated: Monday 14th May 2018
Spatial data recorded.

Record ID: LEIC-E3BCCC
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post Medieval copper alloy seal matrix, 27mm long, 20mm wide and 17mm thick with a weight of 10.15 grams. The object is T shaped and is circular in cross section. It consists of an integral circular suspension loop sitting above a raised collar at the apex of a hexagonal cross szectioned shaft whioch tapers out to form a circular flat base. This is engraved with a six 'peta'l motif arranged around a solid plain circle. Each individual petal decorated with a series of straight lines, running diagonally from either side of a central solid incised line, so they form chevrons. The edge is…
Created on: Monday 25th April 2016
Last updated: Monday 25th April 2016
Spatial data recorded.

Record ID: LEIC-E39EF3
Object type: MOUNT
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy flared terminal, 38mm long, 28mm wide and 15mm thick with a weight of 44.52 grams. The object is T shaped and is rectangular in cross section. It consists of a rectangular cross sectioned shaft whose upper edge turns up at a diagonal and tapers to a rounded point. Below this and sitting under the projection is a triangular shaped, rectangular sectioned, bifurcated projection. The base of the object has two circular projections which appear to be fixing rivets?
Created on: Monday 25th April 2016
Last updated: Monday 25th April 2016
Spatial data recorded.

Record ID: LEIC-E208E3
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post Medieval silver halfgroat of Elizabeth I, London mint, 1560-61.
Created on: Monday 25th April 2016
Last updated: Monday 25th April 2016
Spatial data recorded.

Record ID: LEIC-E1D76D
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post Medieval silver Groat of Mary I, 1553-54. London Mint.
Created on: Monday 25th April 2016
Last updated: Monday 25th April 2016
Spatial data recorded.

Record ID: LEIC-E1C93F
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver penny of Edward I, London Mint, class 4-9 1282-1300.
Created on: Monday 25th April 2016
Last updated: Monday 25th April 2016
Spatial data recorded.

Record ID: LEIC-E19637
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver long cross halfpenny, moneyer NICOLE, mint unknown. 1247-72AD.
Created on: Monday 25th April 2016
Last updated: Monday 25th April 2016
Spatial data recorded.

Record ID: LEIC-0F4995
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver short cross cut halfpenny, York mint, class 2-4a, 1180-1247.
Created on: Thursday 23rd July 2015
Last updated: Tuesday 15th December 2015
Spatial data recorded.

Record ID: LEIC-120FA0
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Unknown, unidentified object, 27mm long, 12mm wide and 5mm thick with a weight of 4.07grams. The object is incomplete and has a rectangular form and cross section. It is larger at one end and consists of a rounded upper surface with a small rounded projection emerging from the base of this. Behind this is a broken circular sectined projection. The underside continues fairly straight whilst the upper surface has a further rounded projection, before falling down to form a very rectangular sectioned rounded hook shaped terminal at the far end, which has a rounded void underneath it. Pa…
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.

Record ID: LEIC-113AAD
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post Medieval silver sixpence? of James I, first issue, 1603. The coin is very worn and has been pierced with circular holes in two places, both of these have been damaged by use.
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.

Record ID: LEIC-9FA196
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver short cross penny, Canterbury mint, moneyer Roberd, Robert or Roger Class II -VII, 1189-1242.
Created on: Monday 18th May 2015
Last updated: Monday 18th May 2015
Spatial data recorded.

Record ID: LEIC-9EEDB1
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post Medieval silver halfgroat of Elizabeth I, London mint 1558-1603.
Created on: Wednesday 6th May 2015
Last updated: Friday 8th May 2015
Spatial data recorded.

Record ID: LEIC-9EC0BB
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver penny probably Richard II, York mint.
Created on: Wednesday 6th May 2015
Last updated: Friday 8th May 2015
Spatial data recorded.

Record ID: LEIC-9E5976
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver penny of Edward I class 1-9, 1279-1300, Durham mint.
Created on: Wednesday 6th May 2015
Last updated: Friday 8th May 2015
Spatial data recorded.

Record ID: LEIC-9E33C0
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver penny probably Henry V or VI, 1413-1461 York mint.
Created on: Wednesday 6th May 2015
Last updated: Friday 8th May 2015
Spatial data recorded.

Record ID: LEIC-3262BB
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy nummus of the House of Constantine, URBS ROMA , wolf and twins, Mint unknown 330-335.
Created on: Wednesday 12th November 2014
Last updated: Tuesday 23rd February 2021
Spatial data recorded. This findspot is known as 'Nr Stratford', grid reference and parish protected.

Record ID: LEIC-324808
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy nummus of Theodora dating to the period AD 337-341 (Reece Period 17). PIETAS ROMANA reverse type depicting Theodora holding infant. Mint of Trier.
Created on: Wednesday 12th November 2014
Last updated: Tuesday 23rd February 2021
Spatial data recorded. This findspot is known as 'Nr Stratford', grid reference and parish protected.

Record ID: LEIC-1FF330
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy nummus of the house of Constantine dating to the period AD 330-335 (Reece Period 17). CONSTANTINOPOLIS reverse type depicting Victory on prow. Mint of Arles.
Created on: Tuesday 11th November 2014
Last updated: Tuesday 23rd February 2021
Spatial data recorded. This findspot is known as 'Nr Stratford', grid reference and parish protected.

Record ID: LEIC-114F44
Object type: FINGER RING
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published
Roman silver intaglio finger ring 28mm in width, 24mm deep and 12mm thick at the bezel. The object is in fair condition and weighs 13.49grams. The ring has a circular hoop with an oval cross-section. This is narrow at the bottom and expands and swells to form a flattened bezel which is set with an oval Intaglio, made from a stone? with a white body and an orange surface. The intaglio shows a standing figure with something held in one hand. The form of the ring fits Giurauds type 2c (Henig type II?). which have been dated to 1st and 2nd Centuries. The subject of the intaglio matches…
Created on: Wednesday 29th October 2014
Last updated: Tuesday 4th October 2016
Spatial data recorded.

Record ID: LEIC-F76409
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post Medieval silver Half Groat of Elizabeth I (1558-1603). London mint, 1582-83.
Created on: Tuesday 28th October 2014
Last updated: Friday 31st October 2014
Spatial data recorded.

Record ID: LEIC-7A4A0D
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Early Post medieval Silver half groat of HenryVII, London mint, 1485-1509.
Created on: Wednesday 22nd October 2014
Last updated: Thursday 23rd October 2014
Spatial data recorded.

Record ID: LEIC-791A41
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Copper-alloy radiate, barbarous dating to AD 275-85.
Created on: Wednesday 22nd October 2014
Last updated: Thursday 23rd October 2014
Spatial data recorded.

Record ID: LEIC-63BC32
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Published
Early Medieval (Anglo-Scandinavian) copper alloy stirrup strap mount of Williams Class A, Type 10D. The object is 57mm long, 23mm wide and 6mm thick with a weight of 29.36grams. The mount is rectangular in form, with a rounded upper surface which terminates in a wide triangular apex, containing a central circular rivet hole filled with iron staining. The mount has a small projecting lobe on each side halfway down its length. In each lower corner is a circular rivet hole and the flat base contains traces of a projecting flange on its reverse. The surface is decorated with a coile…
Created on: Tuesday 21st October 2014
Last updated: Monday 13th April 2015
Spatial data recorded.

Record ID: LEIC-EF7994
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver halfpenny of Edward II, class 11-13 (1310-17), London mint.
Created on: Wednesday 4th June 2014
Last updated: Wednesday 4th June 2014
Spatial data recorded.

Record ID: LEIC-EF4955
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post medieval silver groat of Mary I, 1553-54.
Created on: Wednesday 4th June 2014
Last updated: Wednesday 4th June 2014
Spatial data recorded.

Record ID: LEIC-EEFEA3
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy nummus of Constantine I, BEATA TRANQUILLITAS reverse, Trier mint, 318-24.
Created on: Wednesday 4th June 2014
Last updated: Wednesday 4th June 2014
Spatial data recorded.

Record ID: LEIC-C6DFD8
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post Medieval silver half groat of Charles I, London mint 1634-5.
Created on: Monday 2nd June 2014
Last updated: Tuesday 3rd June 2014
Spatial data recorded.

Record ID: LEIC-1F5D16
Object type: VERVEL
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
late Med/post med silver vervel or possibly finger ring? 14mm in diameter, 4mm wide, 1mm thick and weighing 0.88grams. The object is incomplete, missing part of its loop. It has a rectangular section and its outer surface is decorated with five incised crosses. It has a sub rectangular bezel/attachment which is divided into four quadrants by linear depressions radiating from the centre, giving the impression of a clover leaf.
Created on: Tuesday 13th May 2014
Last updated: Friday 2nd September 2016
Spatial data recorded.

Record ID: LEIC-A531C3
Object type: BALANCE
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Possible post medieval? balance arm fragment, 30mm long, 14mm wide and 3mm thick. The object is in fair condition and weighs 1.94grams. It consists of a rectangular sectioned shaft which has been twisted. This sits in a moulded collar which is attached to a semi-circular shaped projection which has a flat upper side with a circular depression in its centre and a curved underside which is decorated with incised grooves on its outer portion. It has been suggested that these could be part of a balance arm see NMS-09E313
Created on: Tuesday 11th February 2014
Last updated: Tuesday 11th February 2014
Spatial data recorded.

Record ID: LEIC-F90615
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy and enamel horse harness pendant, 32.9mm long, 25.3mm wide and 3.6mm thick. The object is in fair condition and weighs 10.59grams. The pendant is shield shaped with a rectangular section and is missing a suspension loop. It is decorated with three lions passant in a field of patchy red enamel.
Created on: Wednesday 22nd January 2014
Last updated: Wednesday 5th October 2016
Spatial data recorded.

Record ID: LEIC-F01DF8
Object type: FINGER RING
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Published
Medieval silver finger ring, 26mm in diameter, 4mm wide and 3mm thick, witha weight of 9.04g. The ring has a hoop which is D-shaped in cross-section, with a flat sub-rectangular bezel, 15mmm long and 12mm wide. This is engraved with a lower-case black-letter h in a sub-rectangular rope-effect border made up of small oblique lines; this border is broken at the top by a stylised crown with central lis flanked by two half-lis. Around this is an engraved inscription, again in lower-case black-letter script, within an octagonal border again of rope-effect. The use of black-letter script da…
Created on: Wednesday 4th December 2013
Last updated: Wednesday 24th August 2016
Spatial data recorded.

Record ID: LEIC-3FCCB2
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A Medieval silver penny of Edward I dating to the period AD 1282-9. Class 4, probably 4b. London mint. North no.1024. Diameter: 19.0mm, thickness: 1.0mm, weight: 1.27g
Created on: Tuesday 8th October 2013
Last updated: Tuesday 29th October 2013
Spatial data recorded. This findspot is known as 'Corley', grid reference and parish protected.

Record ID: LEIC-3FB916
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Copper alloy Medieval bar-mount with pendent loop. The mount consists of a rectangular plate with a rivet at one end. At the other end a narrower section curves round to hold a ring, before expanding at the end to allow it to be secured to the front plate with a rivet. In good condition with a fine patina. See Egan and Pritchard (1991), p.221, fig.138, nos.1190&1191 for parallels. Dating for these appears limited. Egan and Pritchard (ibid. p.219) mention a 14th century parallel from Yugoslavia. Length: 24.0mm, width: 12.0mm, thickness: 4.0mm, weight: 0.93g
Created on: Tuesday 8th October 2013
Last updated: Monday 26th March 2018
Spatial data recorded. This findspot is known as 'Long Itchington', grid reference and parish protected.

Record ID: LEIC-3FAE62
Object type: MOUNT
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Copper alloy Medieval belt mount. A domed sexfoil with a central hole and two rivets, each of which still has a rove to the reverse. It is bent out of shape with some damaged to the central hole. Very worn and corroded. See Egan and Pritchard (1991) p.187-8, nos.958-985 for parallels. They state (ibid. p.186) 'the faceted ones were clearly in use by the middle of the 14th century and they continued to be a popular line late into the next century.' Length: 24.0mm, width: 12.0mm, thickness: 4.0mm, weight: 0.93g
Created on: Tuesday 8th October 2013
Last updated: Tuesday 29th October 2013
Spatial data recorded. This findspot is known as 'Long Itchington', grid reference and parish protected.

Record ID: LEIC-3FA421
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Copper alloy Medieval swiel mount. It is sub-rectangular in form. One side is slightly narrower than the others and pierced with a hole in the centre to allow the object to swivel against another component. The other sides are slightly bevelled along each edge. Two similar objects, but circular in form, are shown in Meols (2007), p.183, pl.35, no.234-5. Length: 17.0mm, width: 14.0mm, thickness: 5.0mm, weight: 2.67g
Created on: Tuesday 8th October 2013
Last updated: Wednesday 2nd January 2019
Spatial data recorded. This findspot is known as 'Long Itchington', grid reference and parish protected.

Record ID: LEIC-3F9575
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Copper alloy Medieval seal matrix. At the apex is a collar followed by a trefoil suspension loop. Beneath the moulded collar the body is six-sided, flaring inwards slightly, then abruptly outwards towards the circular base. It is highly corroded and the motif and any inscription are now unclear. The matrix is likely to date to the late thirteenth or fourteenth century. Around the earlier part of the thirteenth century the faces of such objects became smaller in diameter and they continued to decline in size toward the end of this century and the start of the next, suggesting that this…
Created on: Tuesday 8th October 2013
Last updated: Tuesday 29th October 2013
Spatial data recorded. This findspot is known as 'Nuneaton', grid reference and parish protected.

Record ID: LEIC-3F6917
Object type: TWEEZERS
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Published
Medieval copper alloy tweezer fragment, Length: 30.0mm, width: 27.0mm, thickness: 1.0mm, weight: 3.52g. .The object has a sub-rectangular form and cross section, with two semi-circular notches removed from each side of one end with a broken area (missing shaft base) in between. One surface has engraved decoration consisting of an incised outer border with an elliptical shape emerging from the broken shaft (top as shown)and terminating in a point near the base. To each side there are three straight lines radiating towards the outer border. This is the wide terminal from of a set …
Created on: Tuesday 8th October 2013
Last updated: Tuesday 15th October 2019
Spatial data recorded. This findspot is known as 'Long Itchington', grid reference and parish protected.

Record ID: LEIC-3F5BD5
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post-Medieval silver halfgroat of Elizabeth I (AD 1558-1603), third issue, bell initial mark (AD 1582/3-83), North no. 2016. Diameter: 17.0mm, thickness: 0.5mm, weight: 0.86g
Created on: Tuesday 8th October 2013
Last updated: Thursday 18th March 2021
Spatial data recorded. This findspot is known as 'Nuneaton', grid reference and parish protected.

Record ID: LEIC-3F4DE4
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Late Medieval silver soldino of Doge Michele Steno (AD 1400-1413), S MARCVS VENETI (lion of St. Mark). Diameter: 15.0mm, thickness: 0.5mm, weight: 0.40g
Created on: Tuesday 8th October 2013
Last updated: Thursday 24th October 2013
Spatial data recorded. This findspot is known as 'Long Itchington', grid reference and parish protected.

Record ID: LEIC-3F4322
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
A silver post-medieval shilling of Colonial America, issued by Lord Baltimore (Cecil Calvert) for use in Maryland; minted in London; 1658. The coin has a crude, square-shaped piercing located at 12 o'clock on the obverse, just above the bust. Diameter: 26.0mm, thickness: 0.5mm, weight: 3.47g
Created on: Tuesday 8th October 2013
Last updated: Friday 23rd May 2014
Spatial data recorded. This findspot is known as 'Nuneaton', grid reference and parish protected.

Record ID: LEIC-3F0D52
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Silver penny of Edward I (AD 1272-1307), Canterbury mint, Class 10 (1301-10), North no.1038-43. Diameter: 18.0mm, thickness: 0.5mm, weight: 1.30g
Created on: Tuesday 8th October 2013
Last updated: Thursday 24th October 2013
Spatial data recorded.

Record ID: LEIC-3F02E7
Object type: JETTON
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Copper alloy Medieval English Jetton. OBV: foliate design in the centre, surrounded by a border of alternating crosses and pellets. REV: cross moline with 2 pellets in each quarter surrounded by a border of pellets. The jetton is pierced in the centre. AD 1230-1340. Diameter: 19.0mm, thickness: 0.5mm, weight: 0.75g
Created on: Tuesday 8th October 2013
Last updated: Thursday 24th October 2013
Spatial data recorded.

Record ID: LEIC-3E6E91
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Published
An early medieval silver penny of Edward the Confessor (AD 1042-1066); Facing bust / small cross type (North 830; AD 1062-1065); mint: Wallingford; moneyer: Burgwine (BVREPINE). Diameter: 17.0mm, thickness: 0.1mm, weight: 1.01g The coin shows an obverse die duplicate with EMC 1011.0171.
Created on: Tuesday 8th October 2013
Last updated: Wednesday 30th April 2014
Spatial data recorded.

Record ID: LEIC-4FF8A0
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post Medieval silver sixpence of Elizabeth I, 1569.
Created on: Thursday 16th May 2013
Last updated: Thursday 16th May 2013
Spatial data recorded.

Record ID: LEIC-4FDB63
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver halfpenny of Henry VI, Pinecone-mascle issue (pm9-12) 1431-3.
Created on: Thursday 16th May 2013
Last updated: Thursday 16th May 2013
Spatial data recorded.

Record ID: LEIC-571CC1
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy disc brooch, 30mm long 22mm wide and 7mm thick. The brooch is in fair condition and weighs 9.18grams. The brooch consists of a central domed boss which is surrounded by concentric linear decoration. Next to the boss is a raised border with transverse indentations which is covered in what looks like pure copper. There is a plain flat area which is enclosed by a fine raised line and beyond this is a series of large stamped circles with very small ones set between them, near the outer edge of the object. The reverse has traces of a catch plate and pin fixing housed on…
Created on: Wednesday 10th April 2013
Last updated: Wednesday 10th April 2013
Spatial data recorded.

Record ID: LEIC-56D8C2
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper-alloy harness pendant, 35mm long, 22mmm wide and 3mm thick. The object is in fair condition and weighs 6.92grams. The object is shield shaped (Scutiform) and has a centrally placed integral suspension loop on its upper edge. It is decorated with a lion Rampant which appears to be formed of blue enamel.
Created on: Wednesday 10th April 2013
Last updated: Tuesday 4th April 2017
Spatial data recorded.

Record ID: LEIC-557408
Object type: CHOPPER
Broad period: PALAEOLITHIC
County: Warwickshire
Workflow stage: Awaiting validation
Lower Paleolithic quartzite pebble chopper-core, 78mm long, 46mm wide and 39mm thick. The stone weighs 171grams and has been worked from three angles to remove at least 9 flakes to form a triangular point which appears to have some wear. We refer to these as chopper-cores as we can't be certain whether the whole object is being used or the flakes are being used as cutting tools. The object is part of a growing number of Quartzite tools which are being found in this area. Leicestershire museums holds the important Waite Collection of pebble tools which was found along, the Leicest…
Created on: Wednesday 10th April 2013
Last updated: Thursday 11th April 2013
Spatial data recorded.

Record ID: LEIC-53BEE7
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver halfpenny of Edward III, London, 1327-77.
Created on: Wednesday 10th April 2013
Last updated: Wednesday 10th April 2013
Spatial data recorded.

Record ID: LEIC-5363B3
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Early medieval silver Sceatta, Series E, variety A variant, 700-765.
Created on: Wednesday 10th April 2013
Last updated: Thursday 17th April 2014
Spatial data recorded.

Record ID: LEIC-0F9CA7
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy sestertius, probably of commodus, Fortuna reverse?
Created on: Tuesday 5th February 2013
Last updated: Thursday 7th February 2013
Spatial data recorded.

Record ID: LEIC-5F2C23
Object type: EWER
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy ewer spout, 36mm long, 22mm wide and 18mm thick. The object is in fair condition and weighs 38.46grams. The object consists of a cast sub rectangular form with a circular opening at the rear of a stylised dogs head with a circular sectioned spout emerging from its mouth. The dog has oval shaped ears, a ridge running down the centre of its head to a prominent brow and a slightly upturned nose.
Created on: Monday 10th December 2012
Last updated: Monday 10th December 2012
Spatial data recorded.

Record ID: LEIC-DEF704
Object type: HARNESS HOOK
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Published
Medieval or post medieval copper alloy belt mount, 43mm long, 8mm wide and 9mm thick. The object is in fair condition and weighs 7.54grams. The mount is in the form of a hook with a rectangular shaped extension. This has two circular rivet holes protruding from its reverse. The hook is aligned so the the open side is aligned with the rivets, presumably to make anything suspended from the hook more secure if attached to a belt worn at the waist.
Created on: Tuesday 4th December 2012
Last updated: Tuesday 25th June 2013
Spatial data recorded.

Record ID: LEIC-DEBE25
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy As or Dupondius, very worn.
Created on: Tuesday 4th December 2012
Last updated: Tuesday 4th December 2012
Spatial data recorded.

Record ID: LEIC-DDEF65
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Post Medieval silver penny of Elizabeth I, London, 1573-8.
Created on: Tuesday 4th December 2012
Last updated: Tuesday 4th December 2012
Spatial data recorded.

Record ID: LEIC-DD7C26
Object type: TOKEN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval lead alloy token, 19mm in diameter and 3mm thick. The token is in fair condition and weighs 3.37grams. It has an irregular form and is decorated on one side with a raised cross and a pellet in each quarter.
Created on: Tuesday 4th December 2012
Last updated: Tuesday 4th December 2012
Spatial data recorded.

Record ID: LEIC-636E54
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle plate, 32mm long, 15mm wide and 3mm thick. The object is in fair condition and weighs 2.56grams. The object consists of a slightly oval buckle loop with a pointed central pin rest which is integrally attached to a spacer frame. This consists of a solid plate from which emerge two rectangular sectioned tapering prongs (one now missing). The object has a circular hole near the edge of the buckle through which is threaded a semi-circular sectioned pin.
Created on: Wednesday 28th November 2012
Last updated: Friday 10th August 2018
Spatial data recorded.

Record ID: LEIC-633DC4
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published
Roman copper alloy Colchester derivative Polden Hill (flat wing ends type, Eastern Group), cf. Mackreth 2011, 66.a2 Plate 51. It is 33mm long, 31mm wide and 12mm thick. The brooch is in fair condition and weighs 10.99grams. The brooch is intact except for its spring and pin. It has three bands of ribbon like decoration on each arm separated by a narrow curved recess. The bow is sub circular and plain.
Created on: Wednesday 28th November 2012
Last updated: Thursday 12th January 2017
Spatial data recorded.

Record ID: LEIC-6302A4
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval silver Edwardian penny, London 1300-1314 (class 10-11).
Created on: Wednesday 28th November 2012
Last updated: Wednesday 28th November 2012
Spatial data recorded.