Record ID: LEIC-A0DCBE
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
Roman copper alloy button and loop fastener, 37mm long, 15mm wide and 10mm thick with a weight of 6.94g. The object is sub triangular in form and rectangular in cross section. It consists of two parts, one is sub triangular in form with a rounded wider edge and is decorated with a central domed projection surrounded by a circular recess. Above this is a triangular terminal, which has a sub triangular projection on its upper surface. Underneath the rounded edge is a sub rectangular cross sectioned shaft which runs downwards for about 6 mm and then turns at ninety degrees before spli…
Created on: Wednesday 19th June 2019
Last updated: Tuesday 9th July 2019
Spatial data recorded.

Record ID: LEIC-FA055D
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
Roman period copper alloy button and loop fastener. 32mm in length, 22mm wide and 21mm thick with a weight of 14.18grams. The object is sub rectangular in form and cross section and consists of a circular (c.20mmin diameter), rectangular cross sectioned plate which is undecorated. From the centre of its underside a triangular openwok loop emerges. This has a circular cross section and has its apex fixed to the plate, after which it bends to one side and projects past the plate. The object is similar to Wild class Vc, which has been dated to the second century..
Created on: Tuesday 12th June 2018
Last updated: Thursday 28th June 2018
Spatial data recorded.

Record ID: LEIC-985A04
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: Rutland
Workflow stage: Awaiting validation
Roman copper alloy button and loop fastener terminal, 20mm in diameter and 12mm thick with a weight of 19.62grams. The object is circular in form and triangular in cross section. Its upper surface has a rounded circular centre surrounded by a raised rounded border which narrows slightly at one edge. Where is narrows the object is damaged, possibly missing a slight projection? The underside tapers in width to a broken circular cross sectioned shaft, c.10mm in diameter, positioned slightly off centre. The object is probably a Wild Class III, if the damaged area had completed a tea…
Created on: Tuesday 8th August 2017
Last updated: Thursday 10th August 2017
Spatial data recorded.

Record ID: LEIC-5668FE
Object type: BUTTON AND LOOP FASTENER
Broad period: IRON AGE
County: Leicestershire
Workflow stage: Awaiting validation
2 Iron age copper alloy fittings, found together. 1. 19mm long, 17mm wide and 13mm thick with a weight of 8.60grams. 2. 23mm long, 21mm wide and 16mm thick with a weight of 17.92grams. Both are circular in form and sub triangular in cross section, having a circular sectioned shaft emerging from the centre of the underside at a 45 degree angle. The slightly smaller one (1.) is decorated with two raised concentric circles, the outer one having a series of transverse lines decorating it. This may be a Wild (1970) Type Va (disc heads with cast ornament) button and loop fastene…
Created on: Monday 5th December 2016
Last updated: Wednesday 11th July 2018
Spatial data recorded.

Record ID: LEIC-8B810E
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
Roman copper alloy button and loop fastener, 35mm long, 19mm wide and 10mm thick with a weight 6.71 grams. The object consists of an openwork triangular loop with a rectangular cross section. This curves upwards at its apex, forming a short circular sectioned shaft which sits below one end of a sub- circular loop with a semi-circular cross section. Where this joins the shaft, the upper, rounded, surface has a double raised collar running across its width and the opposite end houses a pointed projection which has a raised transverse collar, one end forming the point and the other proje…
Created on: Tuesday 3rd May 2016
Last updated: Saturday 12th May 2018
Spatial data recorded. This findspot is known as 'lincolnshire', grid reference and parish protected.

Record ID: LEIC-0B164B
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: Leicestershire
Workflow stage: Published
Roman copper alloy button and loop fastener of Wild Class Vc. It is circular in form and D shaped in cross section. Its upper edge is domed with a central circular depression. Its lower surface is flat and has the remains of a circular sectioned shaft emerging from its centre. This would have formed a triangular shaped attachement loop. It is 24mm in diameter, 10mm thick and weighing 9.31 grams. The object is in fair condition and is incomplete.
Created on: Friday 16th October 2015
Last updated: Monday 8th February 2016
Spatial data recorded.

Record ID: LEIC-654F71
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: Leicestershire
Workflow stage: Published
Iron Age copper alloy petal button and loop fastener of Wild Class III. The petal part of the button is like a shallow bowl and has a circle of copper alloy sitting in the dip. This vaguely resembles a spiral. The loop fastener is trianglar in form. There is evidence that the button/fastener was decorated with red and yellow enamel.
Created on: Thursday 24th February 2011
Last updated: Friday 5th February 2016
Spatial data recorded.

Record ID: LEIC-FC1982
Object type: BUTTON AND LOOP FASTENER
Broad period: IRON AGE
County: Rutland
Workflow stage: Published
Iron age/Roman copper alloy button and loop fastener, 34mm long, 19mm wide and 13mm thick. The object is in fair condition and weighs 12.87 grams. The object consists of an oval plate with a pointed end which has a raised semi-spherical protrusion in its centre. protrudnig from the round end is a circular sectioned shaft which rises out and then turns at 90 degrees to run parallel with the main body, at which point it opens out into a loop.
Created on: Wednesday 9th December 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'RUTLAND', grid reference and parish protected.

Record ID: LEIC-968A13
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Published
Roman copper alloy button and loop fastener of Wild Class III. The object is in fair condition and weighs 6.43grams. The object is lentoid in form with a central dome decorating its upper surface. A shaft emerges from the centre of its reverse and turns at a right angle to form a triangular loop, most of which is now missing. It is 25mm long, 13mm wide and 10mm thick.
Created on: Thursday 29th October 2009
Last updated: Tuesday 23rd October 2018
Spatial data recorded. This findspot is known as 'Loughborough Area', grid reference and parish protected.

Record ID: LEIC-2AECF5
Object type: BUTTON AND LOOP FASTENER
Broad period: IRON AGE
County: Rutland
Workflow stage: Published
Iron age/Roman copper alloy button and loop fastener, 42mm long, 17mm wide and 15mm thick. The object is in good condition with a green patina and weighs 10.88grams. The object consists of a sub rectangular shaft which turns at a right angle and is attached to the underside of a sub triangular 'button' which is decorated with a raised circle in a recessed circular border. The end of the shaft has traces of the 'loop' which would be triangular in form.
Created on: Wednesday 12th August 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Rutland', grid reference and parish protected.

Record ID: LEIC-332C91
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: Leicestershire
Workflow stage: Published
Roman copper alloy Button and loop fastener of Wild's Class VIb. It is 20mm long, 15mm wide and 8mm thick. The object is in fair condition with a green patina and weighs 3.07grams. The object consists of a rectangular plate which is missing some of its edge. Its upper surface is decorated with a single incised line running close to its edge. The edge of the underside has a sub rectangular shaft protruding from it which curves outwards away from the plate and widens slightly. At this point it has snapped off leaving a crescent shaped void, above which are traces of a circular depressio…
Created on: Wednesday 16th August 2006
Last updated: Monday 15th June 2020
Spatial data recorded.

Record ID: LEIC-365333
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: Leicestershire
Workflow stage: Published
Romano-British copper alloy button and loop fastener, 24mm long and 14mm wide. The object is in a fair condition, being worn and incomplete, and has a brown patina. It consists of a rectangular sectioned shaft which curves 90o. This is attached to the underside of a loop which is semi-circular in section and c.5mm wide (with a central hole of 7mm). The further end of this loop is elongated to a point and on its upper side has a globular protrusion.
Created on: Thursday 10th November 2005
Last updated: Saturday 6th February 2016
Spatial data recorded.

Record ID: LEIC-067100
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: Leicestershire
Workflow stage: Published
A Roman button and loop fastener, of Wild's Class IV. The object consists of a domed circular 'button' which is 17mm in diameter and 6mm deep. A triangular 'loop' protrudes from the edge of the underside of the button and then turns 90o and forms an open triangle 37mm long and 17mm wide. The openwork area is 12mm long and 7mm wide, at its pointed edge there is a triangular notch cut into both surfaces, which on the underside stretches all along its length as a groove. It is 48mm long and 17mm wide. The object is in fair condition, with some corrosion, has a green patina and has a weig…
Created on: Friday 3rd December 2004
Last updated: Tuesday 29th June 2021
Spatial data recorded.

Record ID: LEIC-1ADA81
Object type: BUTTON AND LOOP FASTENER
Broad period: IRON AGE
County: Leicestershire
Workflow stage: Awaiting validation
Iron age or Romano British copper alloy fastener, 40mm long, 21mm wide and 3mm thick. The object is in fair condition with a green patina and weighs 7.15 grams. The object represents the loop portion and is roughly triangular in shape. It has a triangular opening 16mm long and 11mm wide, surrounded by a frame with a square section. Below this the object consists of a shaft 20mm long, that narrows gently. It has snapped off at the end, leaving a small circular bump where the button would have been attached.
Created on: Monday 22nd November 2004
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LEIC-B8A6B4
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: Leicestershire
Workflow stage: Published
Copper alloy Roman button-and loop fastener, Wild Class II (1970). It has a ring head and a triangular loop which is 23mm long and the width of each side is about 3mm wide. The loop turns 90 degrees at the head and narrows to a rod which is about 3mm wide and rises 5mm. The rod turns 90 degrees back to its original orientation at the ring-head which has an external diameter of 20mm and an internal diameter of 10mm hole. The object is quite corroded.
Created on: Friday 7th November 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.