Record ID: LEIC-F1B340
Object type: STRAP END
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
Medieval copper alloy strap end? , 33mm long, 14mm wide and 2mm thick. The object is in fair condition and weighs 3.95grams. The object is sub- rectangular in form and section and has two triangular protrusions emerging from one short end. These form foliate terminals and are placed close together just off centre. Sitting behind and just off centre from them, are two circular fixing holes with a further incomplete hole at the far end. One surface is decorated with a incised pattern formed of two crossing diagonal lines flanked by two straight ones, repeated twice. The reverse is plai…
Created on: Monday 18th June 2012
Last updated: Monday 18th June 2012
Spatial data recorded.

Record ID: LEIC-89A712
Object type: STRAP END
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy strap end, 44mm long, 30mm wide and 5mm thick. The object is in fair condition and weighs 16.02 grams. The object consists of a circular back plate which has a sub rectangular protrusion emerging from its lower edge. This is decorated with a foliate design made up of three leaves. The front portion of the circular plate consists of a crescent aligned so its points join in the centre of the upper edge. The crescent has an incised border containing relife decoration resembling a stem and leaves. There are two iron rivets near the crescents points and the whole of t…
Created on: Wednesday 13th June 2012
Last updated: Wednesday 14th November 2012
Spatial data recorded.

Record ID: LEIC-8D0871
Object type: STRAP END
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval (?) copper alloy object, possibly a strap end of unusual form. The object is trapezoidal, but with rounded projections at the ends. Ridges run along the long sides, and there is a recessed line across the wider end. On one side two spots of light green corrosion are visible, suggesting possible attachment points. The object is 31mm long, 13mm wide at its widest point, 2mm thick and weighs 1.84g.
Created on: Tuesday 8th May 2012
Last updated: Tuesday 29th May 2012
Spatial data recorded.

Record ID: LEIC-13FA43
Object type: STRAP END
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
A Medieval copper alloy strap end. The object is long and rectangular. The strap end has projecting trefoil terminal. The object has an angular upper end and is secured with two rivets, one at each end. There is no decoration on the strap end. The length is 41mm and the width is 10mm. The thickness of the strap end is 1mm and the weight is 1.83 grams.
Created on: Wednesday 2nd May 2012
Last updated: Tuesday 15th May 2012
Spatial data recorded.

Record ID: LEIC-1032F5
Object type: STRAP END
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
A medieval strap end made in copper alloy. The strap end is very long and rectangular. At the bottom rounded end of the strap end there is a small sub-circular protrusion. There is not a pattern on the strap end. The weight is 5.26 grams. The length is 42mm and the width is 18mm.
Created on: Wednesday 2nd May 2012
Last updated: Thursday 3rd May 2012
Spatial data recorded.

Record ID: LEIC-D8FB06
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Early Medieval copper alloy strap end, 38mm long, 11mm wide and 3mm thick. The object is in fair condition and weighs 2.68grams. The object is a bow sided two piece strap end which has two circular fixing holes in its rounded upper surface. The surface is decorated with a geometric pattern, which begins with a 'fan' shaped motif , whose narrow end sits between the circular holes. Below this are two triangular geometric motifs, at which point the design is obscured. It has a probable animal head terminal, but this is also obscured by damage. The reverse is plain and pitted. The object …
Created on: Tuesday 17th April 2012
Last updated: Monday 21st May 2018
Spatial data recorded.

Record ID: LEIC-AABE75
Object type: STRAP END
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy two part strap end, 35mm long, 11mm wide and 3mm thick. The object is in a fair condition and weighs 3.73grams. The object is rectangular in form and section. It consists of two plates which taper to a rounded base which has a small semi-circular protrusion in the centre of its base. The two plates are held together by a single centrally placed rivet, one near the terminal and one at the upper edge. There is no decoration on either surface. It is similar to fig. 660, page 142 in Egan and Pritchard, Dress Accessories.
Created on: Tuesday 3rd April 2012
Last updated: Tuesday 3rd April 2012
Spatial data recorded.

Record ID: LEIC-AA9F98
Object type: STRAP END
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy two part strap end, 28mm long, 14mm wide and 3mm thick. The object is in a fair condition and weighs 3.19grams. The object is rectangular in form and section. It consists of two plates which taper to a rounded base which has a small triangular protrusion in the centre of its base. The two plates are held together by a single centrally placed rivet, one near the terminal and one at the upper edge. There is no decoration on either surface. It is similar to fig. 701, page 147 in Egan and Pritchard, Dress Accessories.
Created on: Tuesday 3rd April 2012
Last updated: Tuesday 3rd April 2012
Spatial data recorded.

Record ID: LEIC-AA7DF3
Object type: STRAP END
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy composite strap end fragment, 30mm long, 30mm wide and 6mm thick. The object is in a fair condition and weighs 6.39grams. The object is the central forked spacer plate. It is crescent shaped with a rectangular section and has a central acorn like terminal emerging from its lower centre. This sits below a raised collar, is sub-spherical in form and is decorated with incised cross hatching. It is similar to fig. 92, page 141 in Egan and Pritchard, Dress Accessories.
Created on: Tuesday 3rd April 2012
Last updated: Tuesday 3rd April 2012
Spatial data recorded.

Record ID: LEIC-9C16D7
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Late Early Medieval copper alloy Winchester style strap end, 22mm long, 19mm wide and 3mm thick. The object is in a fair condition and weighs 6.82grams. It is in a fragmentary condition with only the upper portion remaining. It consists of a flat rectangular plate with a central void to take the strap. This is held with four copper alloy rivets, one in each corner, and on one side is decorated with four incised dot in circle motifs. The other side has three of these motifs visible, the lower two overlap a raised ridge which runs horizontally above an incised depression. Below this the…
Created on: Monday 2nd April 2012
Last updated: Wednesday 8th April 2015
Spatial data recorded.