Back to simple search | Back to advanced search

    You searched for:

    • IdentifierID: 0013F2A2CDF01065
    • Show this many records per page: 10
    • Broad period: EARLY MEDIEVAL
    • Object type: MOUNT

  • Thumbnail image of LEIC-364A4E

Record ID: LEIC-364A4E
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval copper alloy mount, 26mm in length, 16mm wide and 1mm thick with a weight of 3.22grams. The object is incomplete and is rectangular in form and cross section. It is decorated with a plain raised border, c.1mm wide and inside this is a narrow depression and a further raised border, c.0.5mm wide. The main field is filled with double plaited interlace forming an entwined beast. At the complete end are two diverging raised lines emerging from the body, suggesting an open mouth or forked tail, sitting over (biting?) a loop. The rest of the decoration is obscured by a circula…
Created on: Tuesday 2nd April 2019
Last updated: Wednesday 17th April 2019
Spatial data recorded.


  • Thumbnail image of LEIC-BCC434

Record ID: LEIC-BCC434
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval Anglo-Saxon copper alloy mount. 7mm thick and 28mm in diameter with a weight of 8.09grams. The object is circular in form and rectangular in cross section with a flat plain outer border and inner recessed area. This area is formed of three concentric ridges, the outer two are beaded, the inner is plain. These are dissected by four sets of three short transverse lines (with the same decoration) at cardinal points. The centre has a final beaded circle surrounding a flat raised circular platform. The inner circle and outer border have slight traces of tinning/silvering and …
Created on: Tuesday 19th February 2019
Last updated: Wednesday 20th February 2019
Spatial data recorded.


  • Thumbnail image of LEIC-6D4AF2

Record ID: LEIC-6D4AF2
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval copper alloy bird shaped mount, 35mm long, 20mm wide and 14mm thick with a weight of 11.84g. The bird is three dimensional and has a rounded head with triangular beak. It has iron? circular eyes and a linear 'mouth'. It has a short circular cross sectioned neck which widens into an inverse triangular shaped, oval cross sectioned, body. This tapers to pointed tail and has wings picked out in slight relief on each side. At the 'apex' of the triangle are two short circular cross sectioned legs, which appear incomplete and one has a recessed section for half its length. …
Created on: Friday 15th February 2019
Last updated: Friday 15th February 2019
Spatial data recorded.


  • Thumbnail image of LEIC-FC7614

Record ID: LEIC-FC7614
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval or Medieval copper alloy belt mount. 18mm in length, 14mm wide and 5mm thick with a weight of 2.16grams. The object is in complete and has a rectangular shape and triangular cross section. It consists of three rounded flat projections at cardinal points, the fourth edge is broken. These flank a pyramid shaped solid centre. This has traces of recessed lines running from each corner to its apex. The form and patina suggest a late early Medieval date and it is possibly part of a harness/belt fitting?
Created on: Tuesday 11th December 2018
Last updated: Thursday 20th December 2018
Spatial data recorded.


  • Thumbnail image of LEIC-AB9BA6

Record ID: LEIC-AB9BA6
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
The object is rectangular in form and circular in cross section. It comprises a hollow circular tube with a stylised animal's head at one end and circular opening at the other, which has an incised collar and has been pierced transversely, with a silver pin. In the centre are two circular features, one on each side, the upper edge of which projects above the tube. Each contains a reversed V-motif inside a recessed field. These features are likely to represent the animal's ears. to the right of these (as shown) are the rest of the animals' features. It has a rectangular cross sectioned …
Created on: Tuesday 13th November 2018
Last updated: Monday 15th April 2019
Spatial data recorded.


  • Thumbnail image of LEIC-B550F3

Record ID: LEIC-B550F3
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval? copper alloy mount, Length: 52 mm, width: 14 mm, thickness: 11 mm, weight: 23.9 g. The object is sub rectangular in form and cross section and is incomplete. It has a central rounded swelling which has a semi-spherical cross section. To each side of this are incomplete rectangular shaped projections with D shaped cross sections. To the right (as photographed) this section sits behind a recessed collar and is thicker than the other side. It also points slightly downwards compared to the rest, which has a flat base and is straight. It is difficult to confirm what this o…
Created on: Wednesday 26th September 2018
Last updated: Friday 12th October 2018
Spatial data recorded.


  • Thumbnail image of LEIC-A10748

Record ID: LEIC-A10748
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval to Medieval probable strap end, 44mm in length, 12mm wide and 2mm thick with a weight of 5.52grams. The object is damaged, missing a lot of original surface and probably incomplete. It is sub rectangular in form and rectangular in cross section and is decorated on one face and along its edge. The object has a flat short edge, with sides that widen out to a point c. one third of its present length, before turning sharply inwards and terminating in a short but damaged (incomplete) far end. It is decorated on one face with an incised linear border c.1mm from its edge. W…
Created on: Tuesday 25th September 2018
Last updated: Friday 19th October 2018
Spatial data recorded.


  • Thumbnail image of LEIC-127138

Record ID: LEIC-127138
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Early medieval copper alloy gilded mount, probably a harness fitting, 52mm long, 21mm wide and 10mm thick with a weight of 18.60g. The object is rectangular in form and cross section and has a raised rectangular cross sectioned border. This is decorated with rope like raised decoration, flanked by a plain raised edge. Each corner has a slight triangular projection with a corresponding rounded raised area over the raised border. These are now corroded but could be curls or crescents? The centre of the mount is decorated with a raised 'saltaire' cross which has a central semi-spherical…
Created on: Thursday 6th September 2018
Last updated: Thursday 28th March 2019
Spatial data recorded.


  • Thumbnail image of LEIC-382B36

Record ID: LEIC-382B36
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval (?) copper alloy mount. Length: 50 mm, width: 10 mm, thickness: 5 mm, weight: 19.57 grams. The object is a slightly curved circular cross sectioned shaft, which tapers in width from 10mm to 5mm. It changes to a sub rectangular form at its wider end and appears to form a stylised animal head, with a corner forming a brow ridge and a circular recess forming an open mouth at its end. The other end is incomplete and it has no obvious decoration. Its reddish/green patina is consistent with early medieval and medieval material. It may be a functional item that just appers to be…
Created on: Thursday 21st September 2017
Last updated: Thursday 28th September 2017
Spatial data recorded.


  • Thumbnail image of LEIC-03DD2C

Record ID: LEIC-03DD2C
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Early medieval copper alloy mount, Thickness: 1 mm, diameter: 50 mm, weight: 34.56 grams. The object is circular in form and rectangular in cross section. It has a central circular hole 7mm in diameter and two small circular holes, c.2mm in diameter, to one side near its edge. It has two ciruclar prongs on its reverse side which sit on the opposite side to the holes, also near the edge. Its upper side is decorated with a solid raised border around its edge and the central hole. Between these the object is decorated with a raised design, which is largely obscured by corrosion and damag…
Created on: Tuesday 1st August 2017
Last updated: Thursday 2nd November 2017
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 46
Search server index: valhalla

You are viewing records: 1 - 10.

Search statistics

  • Total quantity: 46
  • Mean quantity: 1.000
  • Maximum: 1

Filter your search

Institution

1 - 10 of 46 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.